1. 21 1月, 2010 1 次提交
  2. 04 1月, 2010 1 次提交
  3. 02 12月, 2009 1 次提交
  4. 30 11月, 2009 1 次提交
  5. 24 11月, 2009 3 次提交
  6. 14 11月, 2009 2 次提交
    • V
      sctp: Fix regression introduced by new sctp_connectx api · f9c67811
      Vlad Yasevich 提交于
      A new (unrealeased to the user) sctp_connectx api
      
      c6ba68a2
          sctp: support non-blocking version of the new sctp_connectx() API
      
      introduced a regression cought by the user regression test
      suite.  In particular, the API requires the user library to
      re-allocate the buffer and could potentially trigger a SIGFAULT.
      
      This change corrects that regression by passing the original
      address buffer to the kernel unmodified, but still allows for
      a returned association id.
      Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f9c67811
    • V
      sctp: Set source addresses on the association before adding transports · 409b95af
      Vlad Yasevich 提交于
      Recent commit 8da645e1
      	sctp: Get rid of an extra routing lookup when adding a transport
      introduced a regression in the connection setup.  The behavior was
      
      different between IPv4 and IPv6.  IPv4 case ended up working because the
      route lookup routing returned a NULL route, which triggered another
      route lookup later in the output patch that succeeded.  In the IPv6 case,
      a valid route was returned for first call, but we could not find a valid
      source address at the time since the source addresses were not set on the
      association yet.  Thus resulted in a hung connection.
      
      The solution is to set the source addresses on the association prior to
      adding peers.
      Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      409b95af
  7. 19 10月, 2009 1 次提交
    • E
      inet: rename some inet_sock fields · c720c7e8
      Eric Dumazet 提交于
      In order to have better cache layouts of struct sock (separate zones
      for rx/tx paths), we need this preliminary patch.
      
      Goal is to transfert fields used at lookup time in the first
      read-mostly cache line (inside struct sock_common) and move sk_refcnt
      to a separate cache line (only written by rx path)
      
      This patch adds inet_ prefix to daddr, rcv_saddr, dport, num, saddr,
      sport and id fields. This allows a future patch to define these
      fields as macros, like sk_refcnt, without name clashes.
      Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c720c7e8
  8. 13 10月, 2009 1 次提交
    • N
      net: Generalize socket rx gap / receive queue overflow cmsg · 3b885787
      Neil Horman 提交于
      Create a new socket level option to report number of queue overflows
      
      Recently I augmented the AF_PACKET protocol to report the number of frames lost
      on the socket receive queue between any two enqueued frames.  This value was
      exported via a SOL_PACKET level cmsg.  AFter I completed that work it was
      requested that this feature be generalized so that any datagram oriented socket
      could make use of this option.  As such I've created this patch, It creates a
      new SOL_SOCKET level option called SO_RXQ_OVFL, which when enabled exports a
      SOL_SOCKET level cmsg that reports the nubmer of times the sk_receive_queue
      overflowed between any two given frames.  It also augments the AF_PACKET
      protocol to take advantage of this new feature (as it previously did not touch
      sk->sk_drops, which this patch uses to record the overflow count).  Tested
      successfully by me.
      
      Notes:
      
      1) Unlike my previous patch, this patch simply records the sk_drops value, which
      is not a number of drops between packets, but rather a total number of drops.
      Deltas must be computed in user space.
      
      2) While this patch currently works with datagram oriented protocols, it will
      also be accepted by non-datagram oriented protocols. I'm not sure if thats
      agreeable to everyone, but my argument in favor of doing so is that, for those
      protocols which aren't applicable to this option, sk_drops will always be zero,
      and reporting no drops on a receive queue that isn't used for those
      non-participating protocols seems reasonable to me.  This also saves us having
      to code in a per-protocol opt in mechanism.
      
      3) This applies cleanly to net-next assuming that commit
      97775007 (my af packet cmsg patch) is reverted
      Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
      Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3b885787
  9. 01 10月, 2009 1 次提交
  10. 05 9月, 2009 3 次提交
    • V
      sctp: Fix SCTP_MAXSEG socket option to comply to spec. · f68b2e05
      Vlad Yasevich 提交于
      We had a bug that we never stored the user-defined value for
      MAXSEG when setting the value on an association.  Thus future
      PMTU events ended up re-writing the frag point and increasing
      it past user limit.  Additionally, when setting the option on
      the socket/endpoint, we effect all current associations, which
      is against spec.
      
      Now, we store the user 'maxseg' value along with the computed
      'frag_point'.  We inherit 'maxseg' from the socket at association
      creation and use it as an upper limit for 'frag_point' when its
      set.
      Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
      f68b2e05
    • V
      sctp: Send user messages to the lower layer as one · 9c5c62be
      Vlad Yasevich 提交于
      Currenlty, sctp breaks up user messages into fragments and
      sends each fragment to the lower layer by itself.  This means
      that for each fragment we go all the way down the stack
      and back up.  This also discourages bundling of multiple
      fragments when they can fit into a sigle packet (ex: due
      to user setting a low fragmentation threashold).
      
      We introduce a new command SCTP_CMD_SND_MSG and hand the
      whole message down state machine.  The state machine and
      the side-effect parser will cork the queue, add all chunks
      from the message to the queue, and then un-cork the queue
      thus causing the chunks to get transmitted.
      Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
      9c5c62be
    • V
      sctp: Disallow new connection on a closing socket · bec9640b
      Vlad Yasevich 提交于
      If a socket has a lot of association that are in the process of
      of being closed/aborted, it is possible for a remote to establish
      new associations during the time period that the old ones are shutting
      down.  If this was a result of a close() call, there will be no socket
      and will cause a memory leak.  We'll prevent this by setting the
      socket state to CLOSING and disallow new associations when in this state.
      Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
      bec9640b
  11. 07 7月, 2009 1 次提交
    • W
      sctp: fix warning at inet_sock_destruct() while release sctp socket · 1bc4ee40
      Wei Yongjun 提交于
      Commit 'net: Move rx skb_orphan call to where needed' broken sctp protocol
      with warning at inet_sock_destruct(). Actually, sctp can do this right with
      sctp_sock_rfree_frag() and sctp_skb_set_owner_r_frag() pair.
      
          sctp_sock_rfree_frag(skb);
          sctp_skb_set_owner_r_frag(skb, newsk);
      
      This patch not revert the commit d55d87fd,
      instead remove the sctp_sock_rfree_frag() function.
      
      ------------[ cut here ]------------
      WARNING: at net/ipv4/af_inet.c:151 inet_sock_destruct+0xe0/0x142()
      Modules linked in: sctp ipv6 dm_mirror dm_region_hash dm_log dm_multipath
      scsi_mod ext3 jbd uhci_hcd ohci_hcd ehci_hcd [last unloaded: scsi_wait_scan]
      Pid: 1808, comm: sctp_test Not tainted 2.6.31-rc2 #40
      Call Trace:
       [<c042dd06>] warn_slowpath_common+0x6a/0x81
       [<c064a39a>] ? inet_sock_destruct+0xe0/0x142
       [<c042dd2f>] warn_slowpath_null+0x12/0x15
       [<c064a39a>] inet_sock_destruct+0xe0/0x142
       [<c05fde44>] __sk_free+0x19/0xcc
       [<c05fdf50>] sk_free+0x18/0x1a
       [<ca0d14ad>] sctp_close+0x192/0x1a1 [sctp]
       [<c0649f7f>] inet_release+0x47/0x4d
       [<c05fba4d>] sock_release+0x19/0x5e
       [<c05fbab3>] sock_close+0x21/0x25
       [<c049c31b>] __fput+0xde/0x189
       [<c049c3de>] fput+0x18/0x1a
       [<c049988f>] filp_close+0x56/0x60
       [<c042f422>] put_files_struct+0x5d/0xa1
       [<c042f49f>] exit_files+0x39/0x3d
       [<c043086a>] do_exit+0x1a5/0x5dd
       [<c04a86c2>] ? d_kill+0x35/0x3b
       [<c0438fa4>] ? dequeue_signal+0xa6/0x115
       [<c0430d05>] do_group_exit+0x63/0x8a
       [<c0439504>] get_signal_to_deliver+0x2e1/0x2f9
       [<c0401d9e>] do_notify_resume+0x7c/0x6b5
       [<c043f601>] ? autoremove_wake_function+0x0/0x34
       [<c04a864e>] ? __d_free+0x3d/0x40
       [<c04a867b>] ? d_free+0x2a/0x3c
       [<c049ba7e>] ? vfs_write+0x103/0x117
       [<c05fc8fa>] ? sys_socketcall+0x178/0x182
       [<c0402a56>] work_notifysig+0x13/0x19
      ---[ end trace 9db92c463e789fba ]---
      Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com>
      Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
      Acked-by: NVlad Yasevich <vladislav.yasevich@hp.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      1bc4ee40
  12. 18 6月, 2009 1 次提交
  13. 09 6月, 2009 1 次提交
  14. 03 6月, 2009 1 次提交
  15. 14 3月, 2009 1 次提交
  16. 03 3月, 2009 2 次提交
  17. 16 2月, 2009 1 次提交
  18. 06 1月, 2009 1 次提交
  19. 26 12月, 2008 4 次提交
  20. 26 11月, 2008 2 次提交
  21. 24 11月, 2008 1 次提交
  22. 17 11月, 2008 1 次提交
  23. 01 10月, 2008 1 次提交
  24. 28 8月, 2008 2 次提交
  25. 26 8月, 2008 1 次提交
  26. 21 8月, 2008 1 次提交
  27. 25 7月, 2008 1 次提交
    • U
      flag parameters: socket and socketpair · a677a039
      Ulrich Drepper 提交于
      This patch adds support for flag values which are ORed to the type passwd
      to socket and socketpair.  The additional code is minimal.  The flag
      values in this implementation can and must match the O_* flags.  This
      avoids overhead in the conversion.
      
      The internal functions sock_alloc_fd and sock_map_fd get a new parameters
      and all callers are changed.
      
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      #include <fcntl.h>
      #include <stdio.h>
      #include <unistd.h>
      #include <netinet/in.h>
      #include <sys/socket.h>
      
      #define PORT 57392
      
      /* For Linux these must be the same.  */
      #define SOCK_CLOEXEC O_CLOEXEC
      
      int
      main (void)
      {
        int fd;
        fd = socket (PF_INET, SOCK_STREAM, 0);
        if (fd == -1)
          {
            puts ("socket(0) failed");
            return 1;
          }
        int coe = fcntl (fd, F_GETFD);
        if (coe == -1)
          {
            puts ("fcntl failed");
            return 1;
          }
        if (coe & FD_CLOEXEC)
          {
            puts ("socket(0) set close-on-exec flag");
            return 1;
          }
        close (fd);
      
        fd = socket (PF_INET, SOCK_STREAM|SOCK_CLOEXEC, 0);
        if (fd == -1)
          {
            puts ("socket(SOCK_CLOEXEC) failed");
            return 1;
          }
        coe = fcntl (fd, F_GETFD);
        if (coe == -1)
          {
            puts ("fcntl failed");
            return 1;
          }
        if ((coe & FD_CLOEXEC) == 0)
          {
            puts ("socket(SOCK_CLOEXEC) does not set close-on-exec flag");
            return 1;
          }
        close (fd);
      
        int fds[2];
        if (socketpair (PF_UNIX, SOCK_STREAM, 0, fds) == -1)
          {
            puts ("socketpair(0) failed");
            return 1;
          }
        for (int i = 0; i < 2; ++i)
          {
            coe = fcntl (fds[i], F_GETFD);
            if (coe == -1)
              {
                puts ("fcntl failed");
                return 1;
              }
            if (coe & FD_CLOEXEC)
              {
                printf ("socketpair(0) set close-on-exec flag for fds[%d]\n", i);
                return 1;
              }
            close (fds[i]);
          }
      
        if (socketpair (PF_UNIX, SOCK_STREAM|SOCK_CLOEXEC, 0, fds) == -1)
          {
            puts ("socketpair(SOCK_CLOEXEC) failed");
            return 1;
          }
        for (int i = 0; i < 2; ++i)
          {
            coe = fcntl (fds[i], F_GETFD);
            if (coe == -1)
              {
                puts ("fcntl failed");
                return 1;
              }
            if ((coe & FD_CLOEXEC) == 0)
              {
                printf ("socketpair(SOCK_CLOEXEC) does not set close-on-exec flag for fds[%d]\n", i);
                return 1;
              }
            close (fds[i]);
          }
      
        puts ("OK");
      
        return 0;
      }
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      Signed-off-by: NUlrich Drepper <drepper@redhat.com>
      Acked-by: NDavide Libenzi <davidel@xmailserver.org>
      Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      a677a039
  28. 19 7月, 2008 2 次提交