From: SDiZ <sdiz@sdiz.net>

Fix the CONWISE Technology based adapters with buggy SCO support issue
(bugzilla #9027)
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When walking a session's packet reorder queue, use
skb_queue_walk_safe() since the list could be modified inside the
loop.

Rearrange the unlinking skbs from the reorder queue such that it is
done while the queue lock is held in pppol2tp_recv_dequeue() when
walking the skb list.

A version of this patch was suggested by Jarek Poplawski.
Signed-off-by: NJames Chapman <jchapman@katalix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix locking issues in the pppol2tp driver which can cause a kernel
crash on SMP boxes. There were two problems:-

1. The driver was violating read_lock() and write_lock() scheduling
   rules because it wasn't using softirq-safe locks in softirq
   contexts. So we now consistently use the _bh variants of the lock
   functions.

2. The driver was calling sk_dst_get() in pppol2tp_xmit() which was
   taking sk_dst_lock in softirq context. We now call __sk_dst_get().
Signed-off-by: NJames Chapman <jchapman@katalix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Brings max_burst socket option set/get into line with the latest ietf
socket extensions api draft, while maintaining backwards
compatibility.
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If an address family is not listed in "Supported Address Types"
parameter(INIT Chunk), but the packet is sent by that family, this
address family should be considered as supported by peer.  Otherwise,
an error condition will occur. For instance, if kernel receives an
IPV6 SCTP INIT chunk with "Support Address Types" parameter which
indicates just supporting IPV4 Address family. Kernel will reply an
IPV6 SCTP INIT ACK packet, but the source ipv6 address in ipv6 header
will be vacant. This is not correct.

refer to RFC4460 as following:
      IMPLEMENTATION NOTE: If an SCTP endpoint lists in the 'Supported
      Address Types' parameter either IPv4 or IPv6, but uses the other
      family for sending the packet containing the INIT chunk, or if it
      also lists addresses of the other family in the INIT chunk, then
      the address family that is not listed in the 'Supported Address
      Types' parameter SHOULD also be considered as supported by the
      receiver of the INIT chunk.  The receiver of the INIT chunk SHOULD
      NOT respond with any kind of error indication.

Here is a fix to comply to RFC.
Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>
Acked-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make the needlessly global init_tti() static.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Acked-by: N"Ramkrishna Vepa" <Ramkrishna.Vepa@neterion.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This patch fixes the following build error introduced by commit
a79d8e93 and reported by Olaf Hering:

<--  snip  -->

...
  LD      .tmp_vmlinux1
arch/powerpc/sysdev/built-in.o: In function `of_add_fixed_phys':
fsl_soc.c:(.init.text+0xd34): undefined reference to `fixed_phy_add'
make: *** [.tmp_vmlinux1] Error 1

<--   snip  -->
Signed-off-by: NAdrian Bunk <adrian.bunk@movial.fi>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This patch fixes the following build error:

<--  snip  -->

...
  CC [M]  drivers/net/atarilance.o
{standard input}: Assembler messages:
{standard input}:406: Error: symbol `Lberr' is already defined
{standard input}:460: Error: symbol `Lberr' is already defined
make[3]: *** [drivers/net/atarilance.o] Error 1

<--  snip  -->
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Another team member unfortunately left: update MAINTAINERS.

Condense the 3 lists down to a single list for all our drivers.

Point to our new sourceforge index page which is slightly
better navigateable than the sf.net project page.
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This fixes a "trying to free already free IRQ" message and simplifies
the shutdown/suspend code by re-using already existing code when going
to suspend. The code is now symmetric with e100_resume.
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Fixed Kconfig: ehea driver requires sparse mem
Signed-off-by: NThomas Klein <tklein@de.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This message is frequently displayed even if normal file-transfer.
Signed-off-by: NKomuro <komurojun-mbn@nifty.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The mv643xx_eth driver can be loaded as a platform device, as is done by
various Orion (ARM) based devices.  The driver needs to define a module
alias for the platform driver so udev will load it automatically.
Tested with Debian on a QNAP TS-209.
Signed-off-by: NMartin Michlmayr <tbm@cyrius.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

When the chip dies (probably because of a bug somewhere in the driver),
de_stop_rxtx() fails and changing the media type crashes the whole machine.
Replace BUG_ON() in de_set_media() with a warning.
Signed-off-by: NOndrej Zary <linux@rainbow-software.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NFrederic Rodo <f.rodo@til-technologies.fr>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

From: Stephen Hemminger <shemminger@linux-foundation.org>

Based upon a patch by Marcel Wappler:
 
   This patch fixes a DHCP issue of the kernel: some DHCP servers
   (i.e.  in the Linksys WRT54Gv5) are very strict about the contents
   of the DHCPDISCOVER packet they receive from clients.
 
   Table 5 in RFC2131 page 36 requests the fields 'ciaddr' and
   'siaddr' MUST be set to '0'.  These DHCP servers ignore Linux
   kernel's DHCP discovery packets with these two fields set to
   '255.255.255.255' (in contrast to popular DHCP clients, such as
   'dhclient' or 'udhcpc').  This leads to a not booting system.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This fixes the module init message to tell that the legacy
driver loaded. This makes it less confusing, in case both drivers are loaded.
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Replace broken code that attempted to copy 6 byte array to 64-bit
integer. Due to missing cast to 64-bit integer, left shift operation
were 32-bit and lead to bytes been copied over each other. New code
uses simple memcpy, for greater readability and efficiency.
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

instead of with itself.
Signed-off-by: NSebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Slightly more useful if we compare it against the sequence number of the
command we have outstanding, rather than comparing the reply with itself.

Doh. Pointed out by Sebastian Siewior
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Acked-by: NDan Williams <dcbw@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

When I called p54_parse_eeprom() on a hand-coded structure
I managed to make a small mistake with wrap->len which caused
a segfault a few lines down when trying to read entry->len.
This patch changes the validation code to avoid such problems.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Tested-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Since the EEPROM structure is read from hardware, it is
always little endian, annotate that in the struct and
make sure to convert where applicable.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Cc: Michael Wu <flamingice@sourmilk.net>
Tested-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch has added pcibios_enable_device() return value check.
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Merge rate_control_pid_shift_adjust() to rate_control_pid_adjust_rate()
in order to make the learning algorithm aware of constraints on rates. Also
add some comments and rename variables.

This fixes a bug which prevented 802.11b/g non-AP STAs from working with
802.11b only AP STAs.

This patch was originally destined for 2.6.26, and is being backported
to fix a user reported problem in post-2.6.24 kernels.
Signed-off-by: NStefano Brivio <stefano.brivio@polimi.it>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Now the ESP uses the AEAD interface even for algorithms which are
not combined mode, we need to select CONFIG_CRYPTO_AUTHENC as
otherwise only combined mode algorithms will work.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If all of the entropy is in the local and foreign addresses,
but xor'ing together would cancel out that entropy, the
current hash performs poorly.

Suggested by Cosmin Ratiu:

	Basically, the situation is as follows: There is a client
	machine and a server machine. Both create 15000 virtual
	interfaces, open up a socket for each pair of interfaces and
	do SIP traffic. By profiling I noticed that there is a lot of
	time spent walking the established hash chains with this
	particular setup.

	The addresses were distributed like this: client interfaces
	were 198.18.0.1/16 with increments of 1 and server interfaces
	were 198.18.128.1/16 with increments of 1. As I said, there
	were 15000 interfaces. Source and destination ports were 5060
	for each connection.  So in this case, ports don't matter for
	hashing purposes, and the bits from the address pairs used
	cancel each other, meaning there are no differences in the
	whole lot of pairs, so they all end up in the same hash chain.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based upon a report by Andrew Morton and code analysis done
by Jarek Poplawski.

This reverts 33f807ba ("[NETPOLL]:
Kill NETPOLL_RX_DROP, set but never tested.")  and
c7b6ea24 ("[NETPOLL]: Don't need
rx_flags.").

The rx_flags did get tested for zero vs. non-zero and therefore we do
need those tests and that code which sets NETPOLL_RX_DROP et al.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Every skb removed from session->reorder_q needs sock_put().
Signed-off-by: NJarek Poplawski <jarkao2@gmail.com>
Acked-by: NJames Chapman <jchapman@katalix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Every skb removed from session->reorder_q needs sock_put().
Signed-off-by: NJarek Poplawski <jarkao2@gmail.com>
Acked-by: NJames Chapman <jchapman@katalix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the l2cap info_timer is active the info_state will be set to
L2CAP_INFO_FEAT_MASK_REQ_SENT, and it will be unset after the timer is
deleted or timeout triggered.

Here in l2cap_conn_del only call del_timer_sync when the info_state is
set to L2CAP_INFO_FEAT_MASK_REQ_SENT.
Signed-off-by: NDave Young <hidave.darkstar@gmail.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

neigh_update sends skb from neigh->arp_queue while neigh_timer_handler
has increased skbs refcount and calls solicit with the
skb. neigh_timer_handler should not increase skbs refcount but make a
copy of the skb and do solicit with the copy.
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since a5fbb6d1
"KVM: fix !SMP build error" smp_call_function isn't a define anymore
that folds into nothing but a define that calls up_smp_call_function
with all parameters. Hence we cannot #ifdef out the unused code
anymore...
This seems to be the preferred method, so do this for s390 as well.

net/iucv/iucv.c: In function 'iucv_cleanup_queue':
net/iucv/iucv.c:657: error: '__iucv_cleanup_queue' undeclared
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NJosef 'Jeff' Sipek <jeffpc@josefsipek.net>
Signed-off-by: NUrsula Braun <braunu@de.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It makes fackets_out to grow too slowly compared with the
real write queue.

This shouldn't cause those BUG_TRAP(packets <= tp->packets_out)
to trigger but how knows how such inconsistent fackets_out
affects here and there around TCP when everything is nowadays
assuming accurate fackets_out. So lets see if this silences
them all.

Reported by Guillaume Chazarain <guichaz@gmail.com>.
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Current tun/tap driver sets also net device's hw address when asked to
change character device's hw address. This is a good idea, but it
misses RTLN-locking, resulting following error message in 2.6.25-rc3's
inetdev_event() function:

RTNL: assertion failed at net/ipv4/devinet.c (1050)

Attached patch fixes this problem.
Signed-off-by: NKim B. Heino <Kim.Heino@bluegiga.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>