- 21 3月, 2006 40 次提交
-
-
由 Trond Myklebust 提交于
The caller of posix_test_lock() should never need to look at the lock private data, so do not copy that information. This also means that there is no need to call the fl_release_private methods. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Make sure that we're doing our list accounting correctly. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
The struct nfs_direct_req currently keeps a pointer to the file descriptor without referencing it. This may cause problems if the parent process is killed. The nfs_open_context should normally have all the information that we're currently using the filp for, and unlike fput(), is safe to release from an rpciod process context. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Currently NFS O_DIRECT writes use FILE_SYNC so that a COMMIT is not necessary. This simplifies the internal logic, but this could be a difficult workload for some servers. Instead, let's send UNSTABLE writes, and after they all complete, send a COMMIT for the dirty range. After the COMMIT returns successfully, then do the wake_up or fire off aio_complete(). Test plan: Async direct I/O tests against Solaris (or any server that requires committed unstable writes). Reboot server during test. Based on an earlier patch by Chuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We need to use nfs_commit_alloc() in fs/nfs/direct.c. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
^C against "iozone -I" is hitting the assertion in nfs_clear_inode(). Test plan: "iozone -i0 -I -a -c" against a slow server, then control C. This should not cause an oops. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Three atomic_t variables cause a lot of bus locking. Because they are all used in the same places in the code, just use a single spin lock. Now that the atomic_t variables are gone, we can remove the request size limitation since the code no longer depends on the limited width of atomic_t on some platforms. Test plan: Compile with CONFIG_NFS and CONFIG_NFS_DIRECTIO enabled. Millions of fsx operations, iozone, OraSim. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up tab damage and comments. Replace "file_offset" with more commonly used "pos". Test plan: Compile with CONFIG_NFS and CONFIG_NFS_DIRECTIO enabled. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
For async iocb's, the NFS direct write path now returns EIOCBQUEUED, and calls aio_complete when all the requested writes are finished. The synchronous part of the NFS direct write path behaves exactly as it was before. Shared mapped NFS files will have some coherency difficulties when accessed concurrently with aio+dio. Will need to explore how this is handled in the local file system case. Test plan: aio-stress with "-O". OraSim. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Pass the iocb argument all the way down to the direct write request scheduler, and make it available in nfs_direct_write_result. Test plan: Compile the kernel with CONFIG_NFS and CONFIG_NFS_DIRECTIO enabled. Millions of fsx-odirect ops. OraSim. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Eliminate the persistent use of automatic storage in all parts of the NFS client's direct write path to pave the way for introducing support for aio against files opened with the O_DIRECT flag. Test plan: Compile the kernel with CONFIG_NFS and CONFIG_NFS_DIRECTIO enabled. Millions of fsx-odirect ops. OraSim. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Duplicate infrastructure from direct read path that will allow write path to generate multiple write requests concurrently. This will enable us to add support for aio in this path. Temporarily we will lose the ability to do UNSTABLE writes followed by a COMMIT in the direct write path. However, all applications I am aware of that use NFS O_DIRECT currently write in relatively small chunks, so this should not be inconvenient in any way. Test plan: Millions of fsx-odirect ops. OraSim. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Factor out the common piece of completing an NFS direct I/O request. Test plan: Compile kernel with CONFIG_NFS and CONFIG_NFS_DIRECTIO enabled. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Factor out a small common piece of the path that allocate nfs_direct_req structures. Test plan: Compile kernel with CONFIG_NFS and CONFIG_NFS_DIRECTIO enabled. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
We're about to add asynchrony to the NFS direct write path. Begin by abstracting out the common pieces in the read path. The first piece is nfs_direct_read_wait, which works the same whether the process is waiting for a read or a write. Test plan: Compile kernel with CONFIG_NFS and CONFIG_NFS_DIRECTIO enabled. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
For async iocb's, the NFS direct read path should return EIOCBQUEUED and call aio_complete when all the requested reads are finished. The synchronous part of the NFS direct read path behaves exactly as it was before. Test plan: aio-stress with "-O". OraSim. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Pass the iocb argument all the way down to the direct read request scheduler, and make it available in nfs_direct_read_result. Test plan: Compile the kernel with CONFIG_NFS and CONFIG_NFS_DIRECTIO enabled. Millions of fsx-odirect ops. OraSim. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Eliminate the persistent use of automatic storage in all parts of the NFS client's direct read path to pave the way for introducing support for aio against files opened with the O_DIRECT flag. Test plan: Compile the kernel with CONFIG_NFS and CONFIG_NFS_DIRECTIO enabled. Millions of fsx-odirect ops. OraSim. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
size_t is used for holding byte counts, so use it for variables storing rsize. Note that the write path will be updated as we add support for async O_DIRECT writes. Test plan: Need to verify that existing comparisons against new size_t variables behave correctly. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Update to latest coding style standards. Remove block comments on statically defined functions, and place function definitions all on one line. Test plan: Compile kernel with CONFIG_NFS and CONFIG_NFS_DIRECTIO. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
The NFS client's a_ops->direct_IO method, nfs_direct_IO, is required to be present to allow NFS files to be opened with O_DIRECT, but is never called because the NFS client shunts reads and writes to files opened with O_DIRECT directly to its own routines. Gut the nfs_direct_IO function. This eliminates the only part of the NFS client's direct I/O path that requires support for multi-segment iovs, allowing further simplification in subsequent patches. Test plan: Compile the kernel with CONFIG_NFS and CONFIG_NFS_DIRECTIO enabled. Millions of fsx-odirect ops. OraSim. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Same callback hierarchy inversion as for the NFS write calls. This patch is not strictly speaking needed by the O_DIRECT code, but avoids confusing differences between the asynchronous read and write code. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
This patch inverts the callback hierarchy for NFS write calls. Instead of having the NFSv2/v3/v4-specific code set up the RPC callback ops, we allow the original caller to do so. This allows for more flexibility w.r.t. how to set up and tear down the nfs_write_data structure while still allowing the NFSv3/v4 code to perform error handling. The greater flexibility is needed by the asynchronous O_DIRECT code, which wants to be able to hold on to the original nfs_write_data structures after the WRITE RPC call has completed in order to be able to replay them if the COMMIT call determines that the server has rebooted. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 J. Bruce Fields 提交于
Currently lockd identifies its own locks using the FL_LOCKD flag. This doesn't scale well to multiple lock managers--if we did this in nfsv4 too, for example, we'd be left with only one free flag bit. Instead, we just check whether the file manager ops (fl_lmops) set on this lock are our own. The only use for this is in nlm_traverse_locks, which uses it to find locks that need cleaning up when freeing a host or a file. In the long run it might be nice to do reference counting instead of traversing all the locks like this.... Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
posix_test_lock() returns a pointer to a struct file_lock which is unprotected and can be removed while in use by the caller. Move the conflicting lock from the return to a parameter, and copy the conflicting lock. In most cases the caller ends up putting the copy of the conflicting lock on the stack. On i386, sizeof(struct file_lock) appears to be about 100 bytes. We're assuming that's reasonable. Signed-off-by: NAndy Adamson <andros@citi.umich.edu> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
posix_lock_file() is used to add a blocked lock to Lockd's block, so posix_block_lock() is no longer needed. Signed-off-by: NAndy Adamson <andros@citi.umich.edu> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Reorganize nlmsvc_lock() to make full use of posix_lock_file(), which does eveything nlmsvc_lock() needs - no need to call posix_test_lock(), posix_locks_deadlock(), or posix_block_lock() separately. Signed-off-by: NAndy Adamson <andros@citi.umich.edu> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Reorganize nlmsvc_grant_blocked() to make full use of posix_lock_file(). Note that there's no need for separate calls to posix_test_lock(), posix_locks_deadlock(), or posix_block_lock(). Signed-off-by: NAndy Adamson <andros@citi.umich.edu> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Slightly more consistent dprintk error reporting, consolidate some up()'s. Signed-off-by: NAndy Adamson <andros@citi.umich.edu> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Reuse NFSDBG_DIRCACHE and NFSDBG_LOOKUPCACHE to provide additional diagnostic messages that trace the operation of the NFS client's directory behavior. A few new messages are now generated when NFSDBG_VFS is active, as well, to trace normal VFS activity. This compromise provides better trace debugging for those who use pre-built kernels, without adding a lot of extra noise to the standard debug settings. Test-plan: Enable NFS trace debugging with flags 1, 2, or 4. You should be able to see different types of trace messages with each flag setting. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
RPC_DEBUG_DATA no longer needed in net/sunrpc/xprt.c. Test plan: Compile kernel with CONFIG_NFS enabled. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean-up: replace rpc_call() helper with direct call to rpc_call_sync. This makes NFSv2 and NFSv3 synchronous calls more computationally efficient, and reduces stack consumption in functions that used to invoke rpc_call more than once. Test plan: Compile kernel with CONFIG_NFS enabled. Connectathon on NFS version 2, version 3, and version 4 mount points. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Add fields to the rpc_procinfo struct that allow the display of a human-readable name for each procedure in the rpc_iostats output. Also fix it so that the NFSv4 stats are broken up correctly by sub-procedure number. NFSv4 uses only two real RPC procedures: NULL, and COMPOUND. Test plan: Mount with NFSv2, NFSv3, and NFSv4, and do "cat /proc/self/mountstats". Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
NFS client now shows various RPC I/O metrics in /proc/self/mountstats. Test plan: Mount/umount while doing "cat /proc/self/mountstats", multiple iterations of connectathon locking suite. Test with NFS version 2, 3, and 4. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Add a simple mechanism for collecting stats in the RPC client. Stats are tabulated during xprt_release. Note that per_cpu shenanigans are not required here because the RPC client already serializes on the transport write lock. Test plan: Compile kernel with CONFIG_NFS enabled. Basic performance regression testing with high-speed networking and high performance server. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Account for various things that occur while an RPC task is executed. Separate timers for RPC round trip and RPC execution time show how long RPC requests wait in queue before being sent. Eventually these will be accumulated at xprt_release time in one place where they can be viewed from userland. Test plan: Compile kernel with CONFIG_NFS enabled. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Monitor generic transport events. Add a transport switch callout to format transport counters for export to user-land. Test plan: Compile kernel with CONFIG_NFS enabled. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
RPC wait queue length will eventually be exported to userland via the RPC iostats interface. Test plan: Compile kernel with CONFIG_NFS enabled. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Add a field in nfs_server to record a timestamp when a mount succeeds. Report the number of seconds the file system has been mounted via nfs_show_stats(). Test plan: Mount an NFS file system, watch the mountstats reports and compare with clock time. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-