We usually group drivers on a per-vendor basis, implementing device-specific
deviations from the standard in vendor-specific driver.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch to the SRW-S1 driver adds the ability to control all
LEDs simultaneously as testing showed that it was slow (noticably!!)
when seting or clearing all the LEDs in turn.

It adds a 'RPMALL' LED, whose behavoir is asserted to all the LEDs in
the bar graph, individual LEDs can subsequently be turned on/off
individually.
Signed-off-by: NSimon Wood <simon@mungewell.org>
Tested-by: NJohn Murphy <rosegardener@freeode.co.uk>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch to the SRW-S1 driver adds support for the LED RPM
meter on the front of the device. The LEDs are controlled via
/sys/class/leds interface, with an individual control for each
of the 15 LEDs.
Signed-off-by: NSimon Wood <simon@mungewell.org>
Tested-by: NJohn Murphy <rosegardener@freeode.co.uk>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch to the SRW-S1 driver re-writes the HID descriptor
to insert a section for the 3 dials on the device, previously
these were contained within a 'Manufacturer Specific' usage
page.
Signed-off-by: NSimon Wood <simon@mungewell.org>
Tested-by: NJohn Murphy <rosegardener@freeode.co.uk>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add support the SRW-S1 by patching HID descriptor to read axis
as Generic Desktop X, Y and Z (rather than Usage page being
'Simulation').
Signed-off-by: NSimon Wood <simon@mungewell.org>
Tested-by: NJohn Murphy <rosegardener@freeode.co.uk>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>