drm_fb_helper_save_lut_atomic is redundant since the .gamma_store is
now always kept up to date by drm_fb_helper_setcmap.
Signed-off-by: NPeter Rosin <peda@axentia.se>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1499164632-5582-4-git-send-email-peda@axentia.se

I think the gamma_store can end up invalid on error. But the way I read
it, that can happen in drm_mode_gamma_set_ioctl as well, so why should
this pesky legacy fbdev stuff be any better?
Signed-off-by: NPeter Rosin <peda@axentia.se>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1499164632-5582-3-git-send-email-peda@axentia.se

The pseudo-palette has nothing to do with the crtc, so move it
out of the crtc loop and update the palette once, then break out
early.
Signed-off-by: NPeter Rosin <peda@axenita.se>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1499164632-5582-2-git-send-email-peda@axentia.se

Like with panning and modesetting, and like with those, stick with
simple drm_modeset_locking_all for the legacy path, and the full
atomic dance for atomic drivers.

This means a bit more boilerplate since setting up the atomic state
machinery is rather verbose, but then this is shared code for 30+
drivers or so, so meh.

After this patch there's only the LUT/cmap path which is still using
drm_modeset_lock_all for an atomic driver. But Peter is already
locking into reworking that, so I'll leave that code as-is for now.

v2: Squash in patches from Maarten to unify all the various atomic
paths into just one atomic update function for fbdev overall. On top
do one s/restore_fbdev_mode/restore_fbdev_mode_atomic/ so that we have
all-atomic callchains after the first check.

Cc: Peter Rosin <peda@axentia.se>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170704151833.17304-10-daniel.vetter@ffwll.ch

Those are now all protected using fb_helper->lock.

v2: We still need to hold mode_config.mutex right around calling
connector->fill_modes.

v3: I forgot to hold mode_config.mutex while looking at
connector->status and the mode list. Also, we need to patch up the
i915 ->initial_config callback to grab the locks it needs to inspect
the modeset state recovered from the fw.

v4: Don't reorder the probe too much (Ville).

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170705045629.31265-1-daniel.vetter@ffwll.ch

Same game as with the panning function, use drm_modeset_lock_all for
legacy paths, and a proper acquire ctx w/w mutex dance for atomic.

Cc: John Stultz <john.stultz@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170704151833.17304-8-daniel.vetter@ffwll.ch

For the legacy path we'll keep drm_modeset_lock_all, for the atomic
one we drop the use of the magic implicit context and wire it up
properly.

Cc: John Stultz <john.stultz@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170704151833.17304-7-daniel.vetter@ffwll.ch

Like with the drm-native vblank wait ioctl we can entirely rely on the
spinlocks in drm_vblank.c, no need at all to take expensive mutexes.
The only reason we had to take mode_config.mutex was to protect the
fbdev helper's data-structures, but that's now done by
fb_helper->lock.

Cc: John Stultz <john.stultz@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170704151833.17304-6-daniel.vetter@ffwll.ch

That function only needs to take the individual crtc locks, not all
the kms locks. Push down the locking and then minimize it.

Cc: John Stultz <john.stultz@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170704151833.17304-5-daniel.vetter@ffwll.ch

Introduce a new top-level lock for the FB helper code. This will allow
better locking granularity and avoid the need to abuse modeset locking
for this purpose instead.

This patch just adds the new lock everywhere we currently grab
mode_config->mutex (explicitly, or through drm_modeset_lock_all).
Follow-up patches will push the kms locking down into only the places
that need it.

v2:
- use lockdep_assert_held
- use drm_fb_helper_for_each_connector where possible
- use the new top-level lock consistently, i.e. in all the places
  we're currently acquiring mode_config.mutex.
- small polish to the kerneldoc
Tested-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com> (v1)
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170704151833.17304-4-daniel.vetter@ffwll.ch

Since

commit a03fdcb1
Author: Archit Taneja <architt@codeaurora.org>
Date:   Wed Aug 5 12:28:57 2015 +0530

    drm: Add top level Kconfig option for DRM fbdev emulation

this is properly handled using dummy functions. This essentially
undoes

commit 7296c849
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Tue Jul 22 20:10:28 2014 +1000

    drm/i915: fix build without fbde

v2: We also need to drop the #ifdef from headers. Seems like a small
price to pay for slightly cleaner code.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170704151833.17304-3-daniel.vetter@ffwll.ch

Move the modeset locking from drivers into FB helpers.

v2: Also handle intel_connector_add_to_fbdev.

v3: Prevent race in intel_dp_mst with ->detect (Maarten)

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Tested-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com> (v1)
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170704151833.17304-2-daniel.vetter@ffwll.ch

The last user of these (i915.ko) no longer does. We can slim down the
core GEM object by removing the unused 8 bytes.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170705154900.28697-1-chris@chris-wilson.co.uk

Too jarring.

Fixes: f869a6ec ("drm/atomic: Add target_vblank support in atomic helpers (v2)")
Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170627145936.18983-14-daniel.vetter@ffwll.ch

Remove drm_mode_config_fb, I don't see the point of it.
To make it clear that it's ok to use plane->fb directly,
move up drm_drv_uses_atomic_modeset so the code is skipped for atomic
drivers that require plane_state->fb.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170703115106.18783-1-maarten.lankhorst@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The current drm_fb_helper_sys helpers referenced in fb_ops assume that the
video memory is in system RAM. This is not the case for sparc which uses direct
physical memory accesses for IO memory and causes the bochs_drm module to panic
immediately upon startup as it tries to initialise the framebuffer.

Switching fb_ops over to use the drm_fb_helper_cfb helpers ensures that the
correct accesses are used on sparc, fixing the panic and allowing the
bochs_drm module to function under qemu-system-sparc64.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1499032363-8290-1-git-send-email-mark.cave-ayland@ilande.co.ukSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

ttm_place are not supposed to change at runtime. All functions
working with ttm_place provided by <drm/ttm/ttm_placement.h> work
with const ttm_place. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   3485	    184	    264	   3933	    f5d	drivers/gpu/drm/qxl/qxl_ttm.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   3501	    152	    264	   3917	    f4d	drivers/gpu/drm/qxl/qxl_ttm.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/a4f21d3bd2497129f084b8055ecf27f0d3ff1bba.1499013516.git.arvind.yadav.cs@gmail.comSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

ttm_place are not supposed to change at runtime. All functions
working with ttm_place provided by <drm/ttm/ttm_placement.h> work
with const ttm_place. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   2315	    184	      0	   2499	    9c3 drivers/gpu/drm/virtio/virtgpu_ttm.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   2347	    152	      0	   2499	    9c3 drivers/gpu/drm/virtio/virtgpu_ttm.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/25a189402a516a0142d9a4412da0a597c660a96a.1498981093.git.arvind.yadav.cs@gmail.comSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

dma_buf_ops are not supposed to change at runtime. All functions
working with dma_buf_ops provided by <linux/dma-buf.h> work with
const dma_buf_ops. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   2002	    112	      0	   2114	    842	drivers/gpu/drm/udl/udl_dmabuf.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   2114	      0	      0	   2114	    842	drivers/gpu/drm/udl/udl_dmabuf.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/cb4dfac90e85e2270779331f8cb10b635042bad7.1498912415.git.arvind.yadav.cs@gmail.com

drm_prop_enum_lists are not supposed to change at runtime. All functions
working with drm_prop_enum_list provided by <drm/drm_property.h> work
with
const drm_prop_enum_list. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   3594	    176	      0	   3770	    eba drivers/gpu/drm/armada/armada_overlay.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   3722	     48	      0	   3770	    eba drivers/gpu/drm/armada/armada_overlay.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/dbeb176765bda8eaa9efdaa2dcd14c7bbae39cfa.1498905467.git.arvind.yadav.cs@gmail.com

drm_prop_enum_lists are not supposed to change at runtime. All functions
working with drm_prop_enum_list provided by <drm/drm_property.h> work
with
const drm_prop_enum_list. So mark the non-const structs as const.

File size before:
   text	   data	    bss	    dec	    hex	filename
   9629	    744	      0	  10373	   2885 drivers/gpu/drm/armada/armada_crtc.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
   9757	    616	      0	  10373	   2885 drivers/gpu/drm/armada/armada_crtc.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/d2344c4dc40238cfe48fa6d917767df0f053150a.1498902844.git.arvind.yadav.cs@gmail.com

In some cases, like cursor updates, it is interesting to update the
plane in an asynchronous fashion to avoid big delays. The current queued
update could be still waiting for a fence to signal and thus block any
subsequent update until its scan out. In cases like this if we update the
cursor synchronously through the atomic API it will cause significant
delays that would even be noticed by the final user.

This patch creates a fast path to jump ahead the current queued state and
do single planes updates without going through all atomic steps in
drm_atomic_helper_commit(). We take this path for legacy cursor updates.

For now only single plane updates are supported, but we plan to support
multiple planes updates and async PageFlips through this interface as well
in the near future.

v6:	- move check code to drm_atomic_helper.c (Daniel Vetter)

v5:
	- improve comments (Eric Anholt)

v4:
	- fix state->crtc NULL check (Archit Taneja)

v3:
	- fix iteration on the wrong crtc state
	- put back code to forbid updates if there is a queued update for
	the same plane (Ville Syrjälä)
	- move size checks back to drivers (Ville Syrjälä)
	- move ASYNC_UPDATE flag addition to its own patch (Ville Syrjälä)

v2:
	- allow updates even if there is a queued update for the same
	plane.
        - fixes on the documentation (Emil Velikov)
        - unconditionally call ->atomic_async_update (Emil Velikov)
        - check for ->atomic_async_update earlier (Daniel Vetter)
        - make ->atomic_async_check() the last step (Daniel Vetter)
        - add ASYNC_UPDATE flag (Eric Anholt)
        - update state in core after ->atomic_async_update (Eric Anholt)
	- update docs (Eric Anholt)

Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org> (v5)
Acked-by: Eric Anholt <eric@anholt.net> (v5)
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170630180322.29007-2-gustavo@padovan.org

Core code should never have to look at helper stuff, to make sure that
all helper code is 100% optional and can be overriden.

Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170630073921.2345-1-daniel.vetter@ffwll.ch

The CRTC .disable() helper operation is deprecated for atomic drivers,
the new .atomic_disable() helper operation being preferred. Convert all
atomic drivers to .atomic_disable() to avoid cargo-cult use of
.disable() in new drivers.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # for sun4i
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> # for mediatek
Acked-by: Alexey Brodkin <abrodkin@synopsys.com> # for arcpgu
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # for atmel-hlcdc
Tested-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Vincent Abriou <vincent.abriou@st.com> # for sti
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> # for vmwgfx
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170630093646.7928-3-laurent.pinchart+renesas@ideasonboard.com

The old state is useful for drivers that need to perform operations at
enable time that depend on the transition between the old and new
states.

While at it, rename the operation to .atomic_enable() to be consistent
with .atomic_disable(), as the .enable() operation is used by atomic
helpers only.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # for sun4i
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> # for imx-drm and mediatek
Acked-by: Alexey Brodkin <abrodkin@synopsys.com> # for arcpgu
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # for atmel-hlcdc
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> # for hdlcd and mali-dp
Acked-by: Stefan Agner <stefan@agner.ch> # for fsl-dcu
Tested-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Vincent Abriou <vincent.abriou@st.com> # for sti
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> # for vmwgfx
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170630093646.7928-2-laurent.pinchart+renesas@ideasonboard.com

Reduce the list iteration when incrementing the timeline by storing the
fences in increasing order.

v2: Prevent spinlock recursion on free during create
v3: Fixup rebase conflict inside comments that escaped the compiler.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629211253.22766-1-chris@chris-wilson.co.uk

The sync_pt were not adding themselves atomically to the timeline lists,
corruption imminent.  Only a single list is required to track the
unsignaled sync_pt, so reduce it and rename the lock more appropriately
along with using idiomatic names to distinguish a list from links along
it.

v2: Prevent spinlock recursion on free during create (next patch) and
fixup crossref in kerneldoc
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629210532.5617-1-chris@chris-wilson.co.uk

Since sync_pt is only allocated from a single location and is no longer
the base class for fences (that is struct dma_fence) it no longer needs
a generic unsized allocator.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629125930.821-5-chris@chris-wilson.co.uk

If we know the context under which we are called, then we can use the
simpler form of spin_lock_irq (saving the save/restore).
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629125930.821-4-chris@chris-wilson.co.uk

The timeline is u32, which limits any single advance to INT_MAX so that
we can detect all fences that need signaling.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629125930.821-3-chris@chris-wilson.co.uk

Use the canonical __dma_fence_is_later() to compare the fence seqno
against the timeline seqno to check if the fence is signaled.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629125930.821-2-chris@chris-wilson.co.uk

Often we have the task of comparing two seqno known to be on the same
context, so provide a common __dma_fence_is_later().
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170629125930.821-1-chris@chris-wilson.co.uk

"connector" is the list iterator and it can't be NULL.  It causes a
static checker warning because we dereference the iterator to get the
next item in the list.  Let's remove this check.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170628124100.3pw2gyitsfopaib5@mwanda

The CRTC helper .commit() operation is legacy code, the atomic helpers
prefer the .enable() operation. Replace the .commit() helper operation
with .enable() in the driver.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170627211621.27767-6-laurent.pinchart+renesas@ideasonboard.com

The CRTC .prepare() helper operation is part of the legacy helpers and
is deprecated in favour of the .disable() helper operation. As the
vmwgfx driver provides a .disable() helper operation, and as the
.prepare() helper operation implementation is empty, we can remove it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170627211621.27767-5-laurent.pinchart+renesas@ideasonboard.com

The CRTC helper .commit() operation is legacy code, the atomic helpers
prefer the .enable() operation. Replace the .commit() helper operation
with .enable() in the driver.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170627211621.27767-4-laurent.pinchart+renesas@ideasonboard.com

The CRTC .dpms() helper operation is called by the atomic helpers only
when no .prepare(), .atomic_disable() or .disable() operation is
provided. As the qxl driver provides a .disable() operation, the .dpms()
operation is unused and can be removed.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170627211621.27767-3-laurent.pinchart+renesas@ideasonboard.com

The CRTC helper .prepare() operation is legacy code, the atomic helpers
prefer the .disable() operation. As the arcpgu driver implements the
.disable() and .prepare() operations identicallly, .prepare() can be
removed.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170627211621.27767-2-laurent.pinchart+renesas@ideasonboard.com

The CRTC helper .commit() operation is legacy code, the atomic helpers
prefer the .enable() operation. As the arcpgu driver implements the
.enable() operation, .commit() is never used and can be removed.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170627211621.27767-1-laurent.pinchart+renesas@ideasonboard.com

There's no reason for drivers to call this, and all the ones I've
removed looked very fishy:
- Proper quiescenting of the vblank machinery should be done by
  calling drm_crtc_vblank_off(), which is best done by shutting down
  the entire display engine with drm_atomic_helper_shutdown.

- Releasing of allocated memory is done by the core already, it calls
  drm_vblank_cleanup as a fallback.

- drm_vblank_cleanup also has checks for drivers which forget to clean
  up vblank interrupts.

This essentially reverts

commit e77cef9c
Author: Jerome Glisse <jglisse@redhat.com>
Date:   Thu Jan 7 15:39:13 2010 +0100

    drm: Avoid calling vblank function is vblank wasn't initialized

which was done to fix a bug in radeon code with msi interrupts:

commit 003e69f9
Author: Jerome Glisse <jglisse@redhat.com>
Date:   Thu Jan 7 15:39:14 2010 +0100

    drm/radeon/kms: Don't try to enable IRQ if we have no handler installed

Afaict from digging around in old code, this was needed to avoid
blowing up in the ums fallback, and has stopped serving it's purpose
long ago - if irq init fails, the driver fails to load, and there's
really no way to blow up anymore.

Long story short, this was most likely a small ums compat/fallback
hack that became a thing of it's own and got cargo-cult duplicated all
over the drm codebase for essentially no gain at all.

v2: Mention that for drivers with a ->release callback cleanup is
handled by drm_dev_fini() (Thierry).

Cc: Thierry Reding <treding@nvidia.com>
Acked-by: NThierry Reding <treding@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170626161949.25629-2-daniel.vetter@ffwll.ch