In some stupider versions of gcc, it complains:

block/blk-mq.c: In function ‘blk_mq_complete_request’:
./include/linux/srcu.h:175:2: warning: ‘srcu_idx’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  __srcu_read_unlock(sp, idx);
  ^
block/blk-mq.c:620:6: note: ‘srcu_idx’ was declared here
  int srcu_idx;
      ^

which is completely bogus, since we only use srcu_idx when
hctx->flags & BLK_MQ_F_BLOCKING is set, and that's the case where
hctx_lock() has initialized it.

Just set it to '0' in the normal path in hctx_lock() to silence
this annoying warning.

Fixes: 04ced159 ("blk-mq: move hctx lock/unlock into a helper")
Fixes: 5197c05e ("blk-mq: protect completion path with RCU")
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The RCU protection has been expanded to cover both queueing and
completion paths making ->queue_rq_srcu a misnomer.  Rename it to
->srcu as suggested by Bart.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Bart Van Assche <Bart.VanAssche@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

After the recent updates to use generation number and state based
synchronization, we can easily replace REQ_ATOM_STARTED usages by
adding an extra state to distinguish completed but not yet freed
state.

Add MQ_RQ_COMPLETE and replace REQ_ATOM_STARTED usages with
blk_mq_rq_state() tests.  REQ_ATOM_STARTED no longer has any users
left and is removed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

After the recent updates to use generation number and state based
synchronization, blk-mq no longer depends on REQ_ATOM_COMPLETE except
to avoid firing the same timeout multiple times.

Remove all REQ_ATOM_COMPLETE usages and use a new rq_flags flag
RQF_MQ_TIMEOUT_EXPIRED to avoid firing the same timeout multiple
times.  This removes atomic bitops from hot paths too.

v2: Removed blk_clear_rq_complete() from blk_mq_rq_timed_out().

v3: Added RQF_MQ_TIMEOUT_EXPIRED flag.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: "jianchao.wang" <jianchao.w.wang@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

With issue/complete and timeout paths now using the generation number
and state based synchronization, blk_abort_request() is the only one
which depends on REQ_ATOM_COMPLETE for arbitrating completion.

There's no reason for blk_abort_request() to be a completely separate
path.  This patch makes blk_abort_request() piggyback on the timeout
path instead of trying to terminate the request directly.

This removes the last dependency on REQ_ATOM_COMPLETE in blk-mq.

Note that this makes blk_abort_request() asynchronous - it initiates
abortion but the actual termination will happen after a short while,
even when the caller owns the request.  AFAICS, SCSI and ATA should be
fine with that and I think mtip32xx and dasd should be safe but not
completely sure.  It'd be great if people who know the drivers take a
look.

v2: - Add comment explaining the lack of synchronization around
      ->deadline update as requested by Bart.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Asai Thambi SP <asamymuthupa@micron.com>
Cc: Stefan Haberland <sth@linux.vnet.ibm.com>
Cc: Jan Hoeppner <hoeppner@linux.vnet.ibm.com>
Cc: Bart Van Assche <Bart.VanAssche@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blk_mq_check_inflight() and blk_mq_poll_hybrid_sleep() test
REQ_ATOM_COMPLETE to determine the request state.  Both uses are
speculative and we can test REQ_ATOM_STARTED and blk_mq_rq_state() for
equivalent results.  Replace the tests.  This will allow removing
REQ_ATOM_COMPLETE usages from blk-mq.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently, blk-mq timeout path synchronizes against the usual
issue/completion path using a complex scheme involving atomic
bitflags, REQ_ATOM_*, memory barriers and subtle memory coherence
rules.  Unfortunately, it contains quite a few holes.

There's a complex dancing around REQ_ATOM_STARTED and
REQ_ATOM_COMPLETE between issue/completion and timeout paths; however,
they don't have a synchronization point across request recycle
instances and it isn't clear what the barriers add.
blk_mq_check_expired() can easily read STARTED from N-2'th iteration,
deadline from N-1'th, blk_mark_rq_complete() against Nth instance.

In fact, it's pretty easy to make blk_mq_check_expired() terminate a
later instance of a request.  If we induce 5 sec delay before
time_after_eq() test in blk_mq_check_expired(), shorten the timeout to
2s, and issue back-to-back large IOs, blk-mq starts timing out
requests spuriously pretty quickly.  Nothing actually timed out.  It
just made the call on a recycle instance of a request and then
terminated a later instance long after the original instance finished.
The scenario isn't theoretical either.

This patch replaces the broken synchronization mechanism with a RCU
and generation number based one.

1. Each request has a u64 generation + state value, which can be
   updated only by the request owner.  Whenever a request becomes
   in-flight, the generation number gets bumped up too.  This provides
   the basis for the timeout path to distinguish different recycle
   instances of the request.

   Also, marking a request in-flight and setting its deadline are
   protected with a seqcount so that the timeout path can fetch both
   values coherently.

2. The timeout path fetches the generation, state and deadline.  If
   the verdict is timeout, it records the generation into a dedicated
   request abortion field and does RCU wait.

3. The completion path is also protected by RCU (from the previous
   patch) and checks whether the current generation number and state
   match the abortion field.  If so, it skips completion.

4. The timeout path, after RCU wait, scans requests again and
   terminates the ones whose generation and state still match the ones
   requested for abortion.

   By now, the timeout path knows that either the generation number
   and state changed if it lost the race or the completion will yield
   to it and can safely timeout the request.

While it's more lines of code, it's conceptually simpler, doesn't
depend on direct use of subtle memory ordering or coherence, and
hopefully doesn't terminate the wrong instance.

While this change makes REQ_ATOM_COMPLETE synchronization unnecessary
between issue/complete and timeout paths, REQ_ATOM_COMPLETE isn't
removed yet as it's still used in other places.  Future patches will
move all state tracking to the new mechanism and remove all bitops in
the hot paths.

Note that this patch adds a comment explaining a race condition in
BLK_EH_RESET_TIMER path.  The race has always been there and this
patch doesn't change it.  It's just documenting the existing race.

v2: - Fixed BLK_EH_RESET_TIMER handling as pointed out by Jianchao.
    - s/request->gstate_seqc/request->gstate_seq/ as suggested by Peter.
    - READ_ONCE() added in blk_mq_rq_update_state() as suggested by Peter.

v3: - Fixed possible extended seqcount / u64_stats_sync read looping
      spotted by Peter.
    - MQ_RQ_IDLE was incorrectly being set in complete_request instead
      of free_request.  Fixed.

v4: - Rebased on top of hctx_lock() refactoring patch.
    - Added comment explaining the use of hctx_lock() in completion path.

v5: - Added comments requested by Bart.
    - Note the addition of BLK_EH_RESET_TIMER race condition in the
      commit message.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: "jianchao.wang" <jianchao.w.wang@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <Bart.VanAssche@wdc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently, blk-mq protects only the issue path with RCU.  This patch
puts the completion path under the same RCU protection.  This will be
used to synchronize issue/completion against timeout by later patches,
which will also add the comments.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Move the RCU vs SRCU logic into lock/unlock helpers, which makes
the actual functional bits within the locked region much easier
to read.

tj: Reordered in front of timeout revamp patches and added the missing
    blk_mq_run_hw_queue() conversion.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

On scheduler init, a reference to the root group, and a reference to
its corresponding blkg are taken for the oom queue. Yet these
references are not released on scheduler exit, which prevents these
objects from be freed. This commit adds the missing reference
releases.
Reported-by: NDavide Ferrari <davideferrari8@gmail.com>
Tested-by: NHolger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: NPaolo Valente <paolo.valente@linaro.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

For each pair [device for which bfq is selected as I/O scheduler,
group in blkio/io], bfq maintains a corresponding bfq group. Each such
bfq group contains a set of async queues, with each async queue
created on demand, i.e., when some I/O request arrives for it.  On
creation, an async queue gets an extra reference, to make sure that
the queue is not freed as long as its bfq group exists.  Accordingly,
to allow the queue to be freed after the group exited, this extra
reference must released on group exit.

The above holds also for a bfq root group, i.e., for the bfq group
corresponding to the root blkio/io root for a given device. Yet, by
mistake, the references to the existing async queues of a root group
are not released when the latter exits. This causes a memory leak when
the instance of bfq for a given device exits. In a similar vein,
bfqg_stats_xfer_dead is not executed for a root group.

This commit fixes bfq_pd_offline so that the latter executes the above
missing operations for a root group too.
Reported-by: NHolger Hoffstätte <holger@applied-asynchrony.com>
Reported-by: NGuoqing Jiang <gqjiang@suse.com>
Tested-by: NHolger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: NDavide Ferrari <davideferrari8@gmail.com>
Signed-off-by: NPaolo Valente <paolo.valente@linaro.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

HW queues may be unmapped in some cases, such as blk_mq_update_nr_hw_queues(),
then we need to check it before calling blk_mq_tag_idle(), otherwise
the following kernel oops can be triggered, so fix it by checking if
the hw queue is unmapped since it doesn't make sense to idle the tags
any more after hw queues are unmapped.

[  440.771298] Workqueue: nvme-wq nvme_rdma_del_ctrl_work [nvme_rdma]
[  440.779104] task: ffff894bae755ee0 ti: ffff893bf9bc8000 task.ti: ffff893bf9bc8000
[  440.788359] RIP: 0010:[<ffffffffb730e2b4>]  [<ffffffffb730e2b4>] __blk_mq_tag_idle+0x24/0x40
[  440.798697] RSP: 0018:ffff893bf9bcbd10  EFLAGS: 00010286
[  440.805538] RAX: 0000000000000000 RBX: ffff895bb131dc00 RCX: 000000000000011f
[  440.814426] RDX: 00000000ffffffff RSI: 0000000000000120 RDI: ffff895bb131dc00
[  440.823301] RBP: ffff893bf9bcbd10 R08: 000000000001b860 R09: 4a51d361c00c0000
[  440.832193] R10: b5907f32b4cc7003 R11: ffffd6cabfb57000 R12: ffff894bafd1e008
[  440.841091] R13: 0000000000000001 R14: ffff895baf770000 R15: 0000000000000080
[  440.849988] FS:  0000000000000000(0000) GS:ffff894bbdcc0000(0000) knlGS:0000000000000000
[  440.859955] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  440.867274] CR2: 0000000000000008 CR3: 000000103d098000 CR4: 00000000001407e0
[  440.876169] Call Trace:
[  440.879818]  [<ffffffffb7309d68>] blk_mq_exit_hctx+0xd8/0xe0
[  440.887051]  [<ffffffffb730dc40>] blk_mq_free_queue+0xf0/0x160
[  440.894465]  [<ffffffffb72ff679>] blk_cleanup_queue+0xd9/0x150
[  440.901881]  [<ffffffffc08a802b>] nvme_ns_remove+0x5b/0xb0 [nvme_core]
[  440.910068]  [<ffffffffc08a811b>] nvme_remove_namespaces+0x3b/0x60 [nvme_core]
[  440.919026]  [<ffffffffc08b817b>] __nvme_rdma_remove_ctrl+0x2b/0xb0 [nvme_rdma]
[  440.928079]  [<ffffffffc08b8237>] nvme_rdma_del_ctrl_work+0x17/0x20 [nvme_rdma]
[  440.937126]  [<ffffffffb70ab58a>] process_one_work+0x17a/0x440
[  440.944517]  [<ffffffffb70ac3a8>] worker_thread+0x278/0x3c0
[  440.951607]  [<ffffffffb70ac130>] ? manage_workers.isra.24+0x2a0/0x2a0
[  440.959760]  [<ffffffffb70b352f>] kthread+0xcf/0xe0
[  440.966055]  [<ffffffffb70b3460>] ? insert_kthread_work+0x40/0x40
[  440.973715]  [<ffffffffb76d8658>] ret_from_fork+0x58/0x90
[  440.980586]  [<ffffffffb70b3460>] ? insert_kthread_work+0x40/0x40
[  440.988229] Code: 5b 41 5c 5d c3 66 90 0f 1f 44 00 00 48 8b 87 20 01 00 00 f0 0f ba 77 40 01 19 d2 85 d2 75 08 c3 0f 1f 80 00 00 00 00 55 48 89 e5 <f0> ff 48 08 48 8d 78 10 e8 7f 0f 05 00 5d c3 0f 1f 00 66 2e 0f
[  441.011620] RIP  [<ffffffffb730e2b4>] __blk_mq_tag_idle+0x24/0x40
[  441.019301]  RSP <ffff893bf9bcbd10>
[  441.024052] CR2: 0000000000000008
Reported-by: NZhang Yi <yizhan@redhat.com>
Tested-by: NZhang Yi <yizhan@redhat.com>
Signed-off-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Bcache needs to scale the dirty data in the cache over the multiple
backing disks in order to calculate writeback rates for each.
The previous code did this by multiplying the target number of dirty
sectors by the backing device size, and expected it to fit into a
uint64_t; this blows up on relatively small backing devices.

The new approach figures out the bdev's share in 16384ths of the overall
cached data.  This is chosen to cope well when bdevs drastically vary in
size and to ensure that bcache can cross the petabyte boundary for each
backing device.

This has been improved based on Tang Junhui's feedback to ensure that
every device gets a share of dirty data, no matter how small it is
compared to the total backing pool.

The existing mechanism is very limited; this is purely a bug fix to
remove limits on volume size.  However, there still needs to be change
to make this "fair" over many volumes where some are idle.
Reported-by: NJack Douglas <jack@douglastechnology.co.uk>
Signed-off-by: NMichael Lyle <mlyle@lyle.org>
Reviewed-by: NTang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Bcache only does recoverable I/O for read operations by calling
cached_dev_read_error(). For write opertions there is no I/O recovery for
failed requests.

But in bch_count_io_errors() no matter read or write I/Os, before errors
counter reaches io error limit, pr_err() always prints "IO error on %,
recoverying". For write requests this information is misleading, because
there is no I/O recovery at all.

This patch adds a parameter 'is_read' to bch_count_io_errors(), and only
prints "recovering" by pr_err() when the bio direction is READ.
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NMichael Lyle <mlyle@lyle.org>
Reviewed-by: NTang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Member devices of struct cache_set is used to reference all attached
bcache devices to this cache set. If it is treated as array of pointers,
size of devices[] is indicated by member nr_uuids of struct cache_set.

nr_uuids is calculated in drivers/md/super.c:bch_cache_set_alloc(),
	bucket_bytes(c) / sizeof(struct uuid_entry)
Bucket size is determined by user space tool "make-bcache", by default it
is 1024 sectors (defined in bcache-tools/make-bcache.c:main()). So default
nr_uuids value is 4096 from the above calculation.

Every time when bcache code iterates bcache devices of a cache set, all
the 4096 pointers are checked even only 1 bcache device is attached to the
cache set, that's a wast of time and unncessary.

This patch adds a member devices_max_used to struct cache_set. Its value
is 1 + the maximum used index of devices[] in a cache set. When iterating
all valid bcache devices of a cache set, use c->devices_max_used in
for-loop may reduce a lot of useless checking.

Personally, my motivation of this patch is not for performance, I use it
in bcache debugging, which helps me to narrow down the scape to check
valid bcached devices of a cache set.
Signed-off-by: NColy Li <colyli@suse.de>
Reviewed-by: NMichael Lyle <mlyle@lyle.org>
Reviewed-by: NTang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The function cached_dev_make_request() and flash_dev_make_request() call
generic_start_io_acct() with (struct bcache_device)->disk when they start a
closure. Then the function bio_complete() calls generic_end_io_acct() with
(struct search)->orig_bio->bi_disk when the closure has done.
Since the `bi_disk` is not the bcache device, the generic_end_io_acct() is
called with a wrong device queue.

It causes the "inflight" (in struct hd_struct) counter keep increasing
without decreasing.

This patch fix the problem by calling generic_end_io_acct() with
(struct bcache_device)->disk.
Signed-off-by: NZhai Zhaoxuan <kxuanobj@gmail.com>
Reviewed-by: NMichael Lyle <mlyle@lyle.org>
Reviewed-by: NColy Li <colyli@suse.de>
Reviewed-by: NTang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

[edit by mlyle: include sched/debug.h to get __sched]
Signed-off-by: NKent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: NMichael Lyle <mlyle@lyle.org>
Reviewed-by: NMichael Lyle <mlyle@lyle.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Eliminates cases where sync can race and fail to complete / get stuck.
Removes many status flags and simplifies entering-and-exiting closure
sleeping behaviors.

[mlyle: fixed conflicts due to changed return behavior in mainline.
extended commit comment, and squashed down two commits that were mostly
contradictory to get to this state.  Changed __set_current_state to
set_current_state per Jens review comment]
Signed-off-by: NKent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: NMichael Lyle <mlyle@lyle.org>
Reviewed-by: NMichael Lyle <mlyle@lyle.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If the control system would wait for at least half a second, and there's
been no reqs hitting the backing disk for awhile: use an alternate mode
where we have at most one contiguous set of writebacks in flight at a
time. (But don't otherwise delay).  If front-end IO appears, it will
still be quick, as it will only have to contend with one real operation
in flight.  But otherwise, we'll be sending data to the backing disk as
quickly as it can accept it (with one op at a time).
Signed-off-by: NMichael Lyle <mlyle@lyle.org>
Reviewed-by: NTang Junhui <tang.junhui@zte.com.cn>
Acked-by: NColy Li <colyli@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Writeback keys are presently iterated and dispatched for writeback in
order of the logical block address on the backing device.  Multiple may
be, in parallel, read from the cache device and then written back
(especially when there are contiguous I/O).

However-- there was no guarantee with the existing code that the writes
would be issued in LBA order, as the reads from the cache device are
often re-ordered.  In turn, when writing back quickly, the backing disk
often has to seek backwards-- this slows writeback and increases
utilization.

This patch introduces an ordering mechanism that guarantees that the
original order of issue is maintained for the write portion of the I/O.
Performance for writeback is significantly improved when there are
multiple contiguous keys or high writeback rates.
Signed-off-by: NMichael Lyle <mlyle@lyle.org>
Reviewed-by: NTang Junhui <tang.junhui@zte.com.cn>
Tested-by: NTang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

in bch_debug_init(), ret is always 0, and the return value is useless,
change it to return 0 if be success after calling debugfs_create_dir(),
else return a non-zero value.
Signed-off-by: NTang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: NMichael Lyle <mlyle@lyle.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

In such scenario that there are some flash only volumes
, and some cached devices, when many tasks request these devices in
writeback mode, the write IOs may fall to the same bucket as bellow:
| cached data | flash data | cached data | cached data| flash data|
then after writeback of these cached devices, the bucket would
be like bellow bucket:
| free | flash data | free | free | flash data |

So, there are many free space in this bucket, but since data of flash
only volumes still exists, so this bucket cannot be reclaimable,
which would cause waste of bucket space.

In this patch, we segregate flash only volume write streams from
cached devices, so data from flash only volumes and cached devices
can store in different buckets.

Compare to v1 patch, this patch do not add a additionally open bucket
list, and it is try best to segregate flash only volume write streams
from cached devices, sectors of flash only volumes may still be mixed
with dirty sectors of cached device, but the number is very small.

[mlyle: fixed commit log formatting, permissions, line endings]
Signed-off-by: NTang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: NMichael Lyle <mlyle@lyle.org>
Signed-off-by: NMichael Lyle <mlyle@lyle.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Fix ptr_ret.cocci warnings:
drivers/md/bcache/btree.c:1800:1-3: WARNING: PTR_ERR_OR_ZERO can be used

Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR

Generated by: scripts/coccinelle/api/ptr_ret.cocci
Signed-off-by: NVasyl Gomonovych <gomonovych@gmail.com>
Reviewed-by: NMichael Lyle <mlyle@lyle.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently, when a cached device detaching from cache, writeback thread is
not stopped, and writeback_rate_update work is not canceled. For example,
after the following command:
echo 1 >/sys/block/sdb/bcache/detach
you can still see the writeback thread. Then you attach the device to the
cache again, bcache will create another writeback thread, for example,
after below command:
echo  ba0fb5cd-658a-4533-9806-6ce166d883b9 > /sys/block/sdb/bcache/attach
then you will see 2 writeback threads.
This patch stops writeback thread and cancels writeback_rate_update work
when cached device detaching from cache.

Compare with patch v1, this v2 patch moves code down into the register
lock for safety in case of any future changes as Coly and Mike suggested.

[edit by mlyle: commit log spelling/formatting]
Signed-off-by: NTang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: NMichael Lyle <mlyle@lyle.org>
Signed-off-by: NMichael Lyle <mlyle@lyle.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The read request might meet error when searching the btree, but the error
was not handled in cache_lookup(), and this kind of metadata failure will
not go into cached_dev_read_error(), finally, the upper layer will receive
bi_status=0.  In this patch we judge the metadata error by the return
value of bch_btree_map_keys(), there are two potential paths give rise to
the error:

1. Because the btree is not totally cached in memery, we maybe get error
   when read btree node from cache device (see bch_btree_node_get()), the
   likely errno is -EIO, -ENOMEM

2. When read miss happens, bch_btree_insert_check_key() will be called to
   insert a "replace_key" to btree(see cached_dev_cache_miss(), just for
   doing preparatory work before insert the missed data to cache device),
   a failure can also happen in this situation, the likely errno is
   -ENOMEM

bch_btree_map_keys() will return MAP_DONE in normal scenario, but we will
get either -EIO or -ENOMEM in above two cases. if this happened, we should
NOT recover data from backing device (when cache device is dirty) because
we don't know whether bkeys the read request covered are all clean.  And
after that happened, s->iop.status is still its initially value(0) before
we submit s->bio.bio, we set it to BLK_STS_IOERR, so it can go into
cached_dev_read_error(), and finally it can be passed to upper layer, or
recovered by reread from backing device.

[edit by mlyle: patch formatting, word-wrap, comment spelling,
commit log format]
Signed-off-by: NHua Rui <huarui.dev@gmail.com>
Reviewed-by: NMichael Lyle <mlyle@lyle.org>
Signed-off-by: NMichael Lyle <mlyle@lyle.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Pull NVMe fixes from Christoph:

"Below are the pending nvme updates for Linux 4.16. Just fixes and
 cleanups from various contributors this time around."

There is a problem when another module (e.g. nvmet) takes a reference on
the nvme block device and the physical nvme drive is removed.  In that
case nvme_free_ctrl() will not be called and the controller state will be
"deleting" or "dead" unless nvmet module releases the block device.
Later on, the same nvme drive probes back and nvme_init_subsystem() will
be called and fail due to duplicate subnqn (if the nvme device doesn't
support subsystem with multiple controllers). This will cause a probe
failure.  This commit changes the check of multiple controllers support
at nvme_init_subsystem() by not counting all the controllers at "dead" or
"deleting" state (this is safe because controllers at this state will
never be active again).

Fixes: ab9e00cc ("nvme: track subsystems")
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The block device is backed by the transport so we must ensure that the
transport driver will not be removed until all references are released.
Otherwise, we might end up referencing freed memory.
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NNitzan Carmi <nitzanc@mellanox.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

When the io queues setup or tagset allocation failed, ctrl.tagset is
NULL.  But the scan work will still be queued and executed, then panic
comes up due to NULL pointer reference of ctrl.tagset.

To fix this, add a new ctrl state NVME_CTRL_ADMIN_ONLY to inidcate only
admin queue is live. When non io queues or tagset allocation failed, ctrl
enters into this state, scan work will not be started.  But async event
work and nvme dev ioctl will be still available.  This will be helpful to
do further investigation and recovery.
Suggested-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NJianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

When an NVMe controller reports RTD3 Entry Latency larger than the value
of shutdown_timeout module parameter, we update the shutdown_timeout
accordingly to honor RTD3 Entry Latency. Use an informational debug level
instead of a warning level for it.
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Make it symmetric to nvmet_alloc_ctrl().
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Remove the allocated id on error.
Signed-off-by: NIsrael Rukshin <israelr@mellanox.com>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The local variable __size__ will be set a bit later in a for-loop.
Remove the explicit initialization at the beginning of this function.
Signed-off-by: NMinwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

NVMe transport driver module unload may (and usually does) trigger
iteration over the active controllers and delete them all (sometimes
under a mutex).  However, a controller can be created concurrently with
module unload which can lead to leakage of resources (most important char
device node leakage) in case the controller creation occured after the
unload delete and drain sequence.  To protect against this, we take a
module reference to guarantee that the nvme transport driver is not
unloaded while creating a controller.
Signed-off-by: NRoy Shterman <roys@lightbitslabs.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The current fc transport add_port routine validates that there is a
matching port to the target port config. It then takes a reference
on the targetport. The del_port removes the reference.

Unfortunately, if the LLDD undergoes a hw reset or driver unload and
wants to unreg the targetport, due to the reference, the targetport
effectively can't be removed. It requires the admin to remove the
port from the nvmet config first, which calls the del_port.
Note: it appears nvmetcli clear skips over the del_port call (I'm
not attempting to change that).

There's no real reason to take the reference. With FC, there is nothing
to enable or disable as the presence of the FC targetport implicitly
means its enabled, and removal of the targtport means its disabled.

Change add_port to simply validate and change remove_port to a noop.
No references are taken on the targetport.
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The split between what the host accesses on its flows vs what the
target side accesses was flawed. Abort handling didn't properly
clear initiator vs target structure cross-reference and locks
weren't used for synchronization. Thus, there were issues of
freeing structures too soon and access after free.

A couple of these existed pre the IN_ISR mods, but when the
target upcalls were converted to work items, thus adding delays
between the 2 sides of accesses, the problems became pronounced.

Resolve by:
- tracking io state mainly in the tgt-side io structure.
- make the tgt-side io structure released by reference not by
  code flow.
- when changing initiator structures, use locks for
  synchronization
- aborts are clearly tracked for which side saw the abort, and
  after seeing the abort, cross-references are cleared under lock.
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The existing fcloop driver expects the target side upcalls to
the transport to context switch, thus the calls into the nvmet layer
are not done in the calling context of the host/initiator down calls.
The xxx_IN_ISR feature flags are used to select this logic.

The xxx_IN_ISR feature flags should go away in the nvmet_fc transport
as no other lldd utilizes them. Both Broadcom and Cavium lldds have their
own non-ISR deferred handlers thus the nvmet calls can be made directly.

This patch converts the paths that make the target upcalls (command
receive, abort receive) such that they schedule a work item rather
than expecting the transport to schedule the work item.

The patch also cleans up the following:
- The completion path from target to host scheduled a host work
  element called "work". Rename it "tio_done_work" for code clarity.
- The abort io path called a iniwork item to call the host side
  io done. This is no longer needed as the abort routine can make
  the same call.
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The current fcloop driver gets its lport structure from the private
area co-allocated with the fc_localport. All is fine except the
teardown path, which wants to wait on the completion, which is marked
complete by the delete_localport callback performed after
unregister_localport.  The issue is, the nvme_fc transport frees the
localport structure immediately after delete_localport is called,
meaning the original routine is trying to wait on a complete that
was just freed.

Change such that a lport struct is allocated coincident with the
addition and registration of a localport. The private area of the
localport now contains just a backpointer to the real lport struct.
Now, the completion can be waited for, and after completing, the
new structure can be kfree'd.
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

A test case revealed a race condition of an i/o completing on a thread
parallel to the delete_association generating the aborts for the
outstanding ios on the controller.  The i/o completion was freeing the
target fcloop context, thus the abort task referenced the just-freed
memory.

Correct by clearing the target/initiator cross pointers in the io
completion and abort tasks before calling the callbacks. On aborts
that detect already finished io's, ensure the complete context is
called.
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>