commit bcc71cc3cde1468958a3ea859276d8d1a1a68265 upstream.

This patch fixes issue during switch command query where driver was freeing
SRB resources multiple times

Following stack trace will be seen
[  853.436234] BUG: unable to handle kernel NULL pointer dereference at
0000000000000001
[  853.436348] IP: [<ffffffff811df514>] kmem_cache_alloc+0x74/0x1e0
[  853.436476] PGD 0
[  853.436601] Oops: 0000 [#1] SMP

[  853.454700]  [<ffffffff81099f6a>] ? mod_timer+0x14a/0x220
[  853.455543]  [<ffffffff81185465>] mempool_alloc_slab+0x15/0x20
[  853.456395]  [<ffffffff811855a9>] mempool_alloc+0x69/0x170
[  853.457257]  [<ffffffff81098af2>] ? internal_add_timer+0x32/0x70
[  853.458136]  [<ffffffffc0092d2b>] qla2xxx_queuecommand+0x29b/0x3f0 [qla2xxx]
[  853.459024]  [<ffffffff8146535a>] scsi_dispatch_cmd+0xaa/0x230
[  853.459923]  [<ffffffff8146e11f>] scsi_request_fn+0x4df/0x680
[  853.460829]  [<ffffffff81029557>] ? __switch_to+0xd7/0x510
[  853.461747]  [<ffffffff812f7113>] __blk_run_queue+0x33/0x40
[  853.462670]  [<ffffffff812f7735>] blk_delay_work+0x25/0x40
[  853.463603]  [<ffffffff810a882a>] process_one_work+0x17a/0x440
[  853.464546]  [<ffffffff810a94f6>] worker_thread+0x126/0x3c0
[  853.465501]  [<ffffffff810a93d0>] ? manage_workers.isra.24+0x2a0/0x2a0
[  853.466447]  [<ffffffff810b099f>] kthread+0xcf/0xe0
[  853.467379]  [<ffffffff810b08d0>] ? insert_kthread_work+0x40/0x40
[  853.470172] Code: db e2 7e 49 8b 50 08 4d 8b 20 49 8b 40 10 4d 85 e4 0f 84 20
01 00 00 48 85 c0 0f 84 17 01 00 00 49 63 46 20 48 8d 4a 01 4d 8b 06 <49> 8b 1c
04 4c 89 e0 65 49 0f c7 08 0f 94 c0 84 c0 74 ba 49 63
[  853.472072] RIP  [<ffffffff811df514>] kmem_cache_alloc+0x74/0x1e0
[  853.472971]  RSP <ffff88103726fc50>

Fixes: 726b8548 ("qla2xxx: Add framework for async fabric discovery")
Cc: <stable@vger.kernel.org>
Signed-off-by: NGiridhar Malavali <giridhar.malavali@cavium.com>
Reviewed-by: NEwan D. Milne <emilne@redhat.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5c6400536481d9ef44ef94e7bf2c7b8e81534db7 upstream.

This patch fixes issue where driver clears NPort ID map instead of marking
handle in use. Once driver clears NPort ID from the database, it can reuse
the same NPort ID resulting in a PLOGI failure.

[mkp: fixed Himanshu's SoB]

Fixes: a084fd68 ("scsi: qla2xxx: Fix re-login for Nport Handle in use")
Cc: <stable@vger.kernel.org>
Signed-of-by: NQuinn Tran <quinn.tran@cavium.com>
Reviewed-by: NEwan D. Milne <emilne@redhat.com>
Signed-off-by: NHimanshu Madhani <hmadhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 56d942de59ebfa2e970a6cd33299d1984710b6c0 upstream.

Reject bsg request if chip is down.  This prevent erroneous timeout.

Fixes: d051a5aa ("[SCSI] qla2xxx: Add an "is reset active" helper.")
Cc: stable@vger.kernel.org # 4.10
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1e4ac5d6fe0a4af17e4b6251b884485832bf75a3 upstream.

If chip unable to fully initialize, use full shutdown sequence to clear out
any stale FW state.

Fixes: e315cd28 ("[SCSI] qla2xxx: Code changes for qla data structure refactoring")
Cc: stable@vger.kernel.org  #4.10
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8235f4b5aeba868739f6e12a51ad92689e3f78ef upstream.

Task abort can take 2 paths: 1) serial/synchronous abort where the calling
thread will put to sleep, wait for completion and free cmd resource.  2) async
abort where the cmd free will be free by the completion thread.  For path 2,
driver is freeing the SRB too early.

Fixes: f6145e86 ("scsi: qla2xxx: Fix race between switch cmd completion and timeout")
Cc: stable@vger.kernel.org # 4.19
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7c388f91ec1a59b0ed815b07b90536e2d57e1e1f upstream.

Remove stale debug trace.

Fixes: 1eb42f96 ("qla2xxx: Make trace flags more readable")
Cc: stable@vger.kernel.org #4.10
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b86ac8fd4b2f6ec2f9ca9194c56eac12d620096f upstream.

This patch improves performance for 16G and above adapter by removing
additional call to process_response_queue().

[mkp: typo]

Cc: <stable@vger.kernel.org>
Signed-off-by: NQuinn Tran <quinn.tran@cavium.com>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4c1458df9635c7e3ced155f594d2e7dfd7254e21 upstream.

Fixes: 6246b8a1 ("[SCSI] qla2xxx: Enhancements to support ISP83xx.")
Fixes: 1bb39548 ("qla2xxx: Correct iiDMA-update calling conventions.")
Cc: <stable@vger.kernel.org>
Signed-off-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 641a41dbba217ee5bd26abe6be77f8cead9cd00e upstream.

This patch fixes an issue that the sci_remove() could not remove
dev_attr_rx_fifo_timeout because uart_remove_one_port() set
the port->port.type to PORT_UNKNOWN.
Reported-by: NHiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com>
Fixes: 5d23188a ("serial: sh-sci: make RX FIFO parameters tunable via sysfs")
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: NUlrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d47748e5ae5af6572e520cc9767bbe70c22ea498 upstream.

Current behavior is to automatically disable metacopy if redirect_dir is
not enabled and proceed with the mount.

If "metacopy=on" mount option was given, then this behavior can confuse the
user: no mount failure, yet metacopy is disabled.

This patch makes metacopy=on imply redirect_dir=on.

The converse is also true: turning off full redirect with redirect_dir=
{off|follow|nofollow} will disable metacopy.

If both metacopy=on and redirect_dir={off|follow|nofollow} is specified,
then mount will fail, since there's no way to correctly resolve the
conflict.
Reported-by: NDaniel Walsh <dwalsh@redhat.com>
Fixes: d5791044 ("ovl: Provide a mount option metacopy=on/off...")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5e1275808630ea3b2c97c776f40e475017535f72 upstream.

Kaixuxia repors that it's possible to crash overlayfs by removing the
whiteout on the upper layer before creating a directory over it.  This is a
reproducer:

 mkdir lower upper work merge
 touch lower/file
 mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merge
 rm merge/file
 ls -al merge/file
 rm upper/file
 ls -al merge/
 mkdir merge/file

Before commencing with a vfs_rename(..., RENAME_EXCHANGE) verify that the
lookup of "upper" is positive and is a whiteout, and return ESTALE
otherwise.

Reported by: kaixuxia <xiakaixu1987@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Fixes: e9be9d5e ("overlay filesystem")
Cc: <stable@vger.kernel.org> # v3.18
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6cd078702f2f33cb6b19a682de3e9184112f1a46 upstream.

linking a non-copied-up file into a non-copied-up parent results in a
nested call to mutex_lock_interruptible(&oi->lock). Fix this by copying up
target parent before ovl_nlink_start(), same as done in ovl_rename().

~/unionmount-testsuite$ ./run --ov -s
~/unionmount-testsuite$ ln /mnt/a/foo100 /mnt/a/dir100/

 WARNING: possible recursive locking detected
 --------------------------------------------
 ln/1545 is trying to acquire lock:
 00000000bcce7c4c (&ovl_i_lock_key[depth]){+.+.}, at:
     ovl_copy_up_start+0x28/0x7d
 but task is already holding lock:
 0000000026d73d5b (&ovl_i_lock_key[depth]){+.+.}, at:
     ovl_nlink_start+0x3c/0xc1

[SzM: this seems to be a false positive, but doing the copy-up first is
harmless and removes the lockdep splat]

Reported-by: syzbot+3ef5c0d1a5cb0b21e6be@syzkaller.appspotmail.com
Fixes: 5f8415d6 ("ovl: persistent overlay inode nlink for...")
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit babf4770be0adc69e6d2de150f4040f175e24beb upstream.

We hit a BUG on kfree of an ERR_PTR()...

Reported-by: syzbot+ff03fe05c717b82502d0@syzkaller.appspotmail.com
Fixes: 8b88a2e6 ("ovl: verify upper root dir matches lower root dir")
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e4f3aa2e1e67bb48dfbaaf1cad59013d5a5bc276 upstream.

There is another cast from unsigned long to int which causes
a bounds check to fail with specially crafted input. The value is
then used as an index in the slot array in cdrom_slot_status().

This issue is similar to CVE-2018-16658 and CVE-2018-10940.
Signed-off-by: NYoung_X <YangX92@hotmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 985cdcb08a0488558d1005139596b64d73bee267 ]

Mode setting depends on last mode set, in particular
because of exposure calculation when downscale mode
change between subsampling and scaling.
At stream on the last mode was wrongly set to current mode,
so no change was detected and exposure calculation
was not made, fix this.
Signed-off-by: NHugues Fruchet <hugues.fruchet@st.com>
Reviewed-by: NJacopo Mondi <jacopo@jmondi.org>
Tested-by: NJacopo Mondi <jacopo@jmondi.org>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit ff30e9e8509cb877dc7cbc776b36c70f5bdd290f ]

We accidentally left out the size of the amdgpu_bo_list struct.  It
could lead to memory corruption on 32 bit systems.  You'd have to
pick the absolute maximum and set "num_entries == 59652323" then size
would wrap to 16 bytes.

Fixes: 920990cb ("drm/amdgpu: allocate the bo_list array after the list")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NBas Nieuwenhuizen <basni@chromium.org>
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 62e3941776fea8678bb8120607039410b1b61a65 ]

p9stat_free is more of a cleanup function than a 'free' function as it
only frees the content of the struct; there are chances of use-after-free
if it is improperly used (e.g. p9stat_free called twice as it used to be
possible to)

Clearing dangling pointers makes the function idempotent and safer to use.

Link: http://lkml.kernel.org/r/1535410108-20650-2-git-send-email-asmadeus@codewreck.orgSigned-off-by: NDominique Martinet <dominique.martinet@cea.fr>
Reported-by: syzbot+d4252148d198410b864f@syzkaller.appspotmail.com
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit fb98e29ff1ea5a8118265d11f0e03bc8608a49cb ]

fixes: 6949d864 ("media: ov5640: do not change mode if format or frame interval is unchanged").

Symptom was fuzzy image because of JPEG default format
not being changed according to new format selected, fix this.
Init sequence initialises format to YUV422 UYVY but
sensor->fmt initial value was set to JPEG, fix this.
Signed-off-by: NHugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 31edaa6e7fd8143085a6a60c564447c07e76ed9f ]

Signals available on both i.MX6UL and i.MX6ULL should have the same name
because it is the case of all others common signals, it avoids to make
mistakes (use the wrong ones) and it makes writing device tree files
less complicated. For example:

imx6ul-imx6ull-board.dtsi:
 ...
 pinctrl_uart5: uart5grp {
	fsl,pins = <
		MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX   0x1b0b1
	 	MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX   0x1b0b1
 	 >;
 };

imx6ul-board.dts:
 #include <imx6ul.dtsi>
 #include <imx6ul-imx6ull-board.dtsi>
 ...

imx6ull-board.dts:
 #include <imx6ull.dtsi>
 #include <imx6ul-imx6ull-board.dtsi>
 ...

Without this patch, the imx6ull-board.dtb will use
MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX instead of
MX6ULL_PAD_UART5_RX_DATA__UART5_DCE_RX and the uart5 will be
misconfigured.
Signed-off-by: NSébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit a9ad01bc759df79b0012f43ee52164391e31cd96 ]

There are certain filesystem features which we support for reading but
not for writing. We properly refuse to mount such filesystems read-write
however for some features (such as read-only partitions), we don't check
for these features when remounting the filesystem from read-only to
read-write. Thus such filesystems could be remounted read-write leading
to strange behavior (most likely crashes).

Fix the problem by marking in superblock whether the filesystem has some
features that are supported in read-only mode and check this flag during
remount.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit b4dc44b3cac9e8327e0655f530ed0c46f2e6214c ]

the 9p client code overwrites our glock.client_id pointing to a static
buffer by an allocated string holding the network provided value which
we do not care about; free and reset the value as appropriate.

This is almost identical to the leak in v9fs_file_getlock() fixed by
Al Viro in commit ce85dd58 ("9p: we are leaking glock.client_id
in v9fs_file_getlock()"), which was returned as an error by a coverity
false positive -- while we are here attempt to make the code slightly
more robust to future change of the net/9p/client code and hopefully
more clear to coverity that there is no problem.

Link: http://lkml.kernel.org/r/1536339057-21974-5-git-send-email-asmadeus@codewreck.orgSigned-off-by: NDominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 1f447e51c0b9e8beeec0917ea5f51930f55e17c9 ]

Currently we have structrues comp (which is empty) and comp_info being
used to register and deregister the component.  This mismatch in naming
occurred from a previous commit that renamed aim_info to comp. Fix this
to use consistent component naming in line with most/net, most/sound etc.

This fixes the message two issues, one with a null empty name when
loading the module:

[ 1485.269515] most_core: registered new core component (null)

and an Oops when removing the module:

[ 1485.277971] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[ 1485.278648] PGD 0 P4D 0
[ 1485.279253] Oops: 0002 [#2] SMP PTI
[ 1485.279847] CPU: 1 PID: 32629 Comm: modprobe Tainted: P      D WC OE     4.18.0-8-generic #9
[ 1485.280442] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
[ 1485.281040] RIP: 0010:most_deregister_component+0x3c/0x70 [most_core]
.. etc

Fixes: 1b10a031 ("staging: most: video: remove aim designators")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit d8de8260a45aae8f74af77eae9a162bdc0ed48d2 ]

After GPU reset amdgpu_vm_clear_bo triggers VM flush
but job->vm_pd_addr is not set causing SDMA TO.

v2:
Per advise by Christian König avoid flushing VM for jobs where
job->vm_pd_addr wasn't explicitly set.

v3:
Shortcut vm_flush_needed early.

Fixes cbd5285 drm/amdgpu: move setting the GART addr into TTM.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 2a3181d9cfd6d5aa48f8527708d0c32072072cef ]

The R-Car Gen3 DU utilises the VSP1 hardware for memory access. The
limits on the RPF and WPF in this pipeline are 8190x8190.

Update the supported maximum sizes accordingly.
Signed-off-by: NKieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4ee033301c898dd0835d035d0e0eb768a3d35da1 ]

Fixes commit 17be2a29 ("staging: iio:
ad7606: replace range/range_available with corresponding scale").

The AD7606 devices don't have a 2.5V voltage range, they have 5V & 10V
voltage range, which is selectable via the `gpio_range` descriptor.

The scales also seem to have been miscomputed, because when they were
applied to the raw values, the results differ from the expected values.
After checking the ADC transfer function in the datasheet, these were
re-computed.
Signed-off-by: NAlexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 693b31b2fc1636f0aa7af53136d3b49f6ad9ff39 ]

Test tm-tmspr might exit before all threads stop executing, because it just
waits for the very last thread to join before proceeding/exiting.

This patch makes sure that all threads that were created will join before
proceeding/exiting.

This patch also guarantees that the amount of threads being created is equal
to thread_num.
Signed-off-by: NBreno Leitao <leitao@debian.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit bd24db04101f45a9c1d874fe21b0c7eab7bcadec ]

The driver ignored the width alignment which exists due to the UYVY
colorspace format. Fix the width alignment and make use of the the
provided v4l2 helper function to set the width, height and all
alignments in one.

Fixes: 963ddc63 ("[media] media: tvp5150: Add cropping support")
Signed-off-by: NMarco Felsch <m.felsch@pengutronix.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 8344498721059754e09d30fe255a12dab8fb03ef ]

The SC16IS752 is a dual-channel device. The two channels are largely
independent, but the IRQ signals are wired together as an open-drain,
active low signal which will be driven low while either of the
channels requires attention, which can be for significant periods of
time until operations complete and the interrupt can be acknowledged.
In that respect it is should be treated as a true level-sensitive IRQ.

The kernel, however, needs to be able to exit interrupt context in
order to use I2C or SPI to access the device registers (which may
involve sleeping).  Therefore the interrupt needs to be masked out or
paused in some way.

The usual way to manage sleeping from within an interrupt handler
is to use a threaded interrupt handler - a regular interrupt routine
does the minimum amount of work needed to triage the interrupt before
waking the interrupt service thread. If the threaded IRQ is marked as
IRQF_ONESHOT the kernel will automatically mask out the interrupt
until the thread runs to completion. The sc16is7xx driver used to
use a threaded IRQ, but a patch switched to using a kthread_worker
in order to set realtime priorities on the handler thread and for
other optimisations. The end result is non-threaded IRQ that
schedules some work then returns IRQ_HANDLED, making the kernel
think that all IRQ processing has completed.

The work-around to prevent a constant stream of interrupts is to
mark the interrupt as edge-sensitive rather than level-sensitive,
but interpreting an active-low source as a falling-edge source
requires care to prevent a total cessation of interrupts. Whereas
an edge-triggering source will generate a new edge for every interrupt
condition a level-triggering source will keep the signal at the
interrupting level until it no longer requires attention; in other
words, the host won't see another edge until all interrupt conditions
are cleared. It is therefore vital that the interrupt handler does not
exit with an outstanding interrupt condition, otherwise the kernel
will not receive another interrupt unless some other operation causes
the interrupt state on the device to be cleared.

The existing sc16is7xx driver has a very simple interrupt "thread"
(kthread_work job) that processes interrupts on each channel in turn
until there are no more. If both channels are active and the first
channel starts interrupting while the handler for the second channel
is running then it will not be detected and an IRQ stall ensues. This
could be handled easily if there was a shared IRQ status register, or
a convenient way to determine if the IRQ had been deasserted for any
length of time, but both appear to be lacking.

Avoid this problem (or at least make it much less likely to happen)
by reducing the granularity of per-channel interrupt processing
to one condition per iteration, only exiting the overall loop when
both channels are no longer interrupting.
Signed-off-by: NPhil Elwell <phil@raspberrypi.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit a27d938251ef40c43db81af16fc26b2cec181d4d ]

In commit c58caaab ("serial: 8250: of: Defer probe on missing IRQ"), a
check was added for the UART driver being probed prior to the parent IRQ
controller.

Unfortunately this breaks certain boards which have no interrupt support,
like Huawei D03.

Indeed, the 8250 DT bindings state that interrupts should be supported -
not must.

To fix, switch from irq_of_parse_and_map() to of_irq_get(), which
does relay whether the IRQ host controller domain is not ready, i.e.
defer probe, instead of assuming it.

Fixes: c58caaab ("serial: 8250: of: Defer probe on missing IRQ")
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Reviewed-by: NAlexander Sverdlin <alexander.sverdlin@nokia.com>
Tested-by: NAlexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 37ec35a6cc2b99eb7fd6b85b7d7b75dff46bc353 ]

This patch fixes a missing endian conversion in
vle_get_logical_extent_head.
Reviewed-by: NChao Yu <yuchao0@huawei.com>
Signed-off-by: NGao Xiang <gaoxiang25@huawei.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 2794f688b2c336e0da85e9f91fed33febbd9f54a ]

Call pcie_bus_configure_settings() on MIPS, like for other platforms.
The function pcie_bus_configure_settings() makes sure the MPS (Max
Payload Size) across the bus is uniform and provides the ability to
tune the MRSS (Max Read Request Size) and MPS (Max Payload Size) to
higher performance values. Some devices will not operate properly if
these aren't set correctly because the firmware doesn't always do it.
Signed-off-by: NHuacai Chen <chenhc@lemote.com>
Signed-off-by: NPaul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20649/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Huacai Chen <chenhuacai@gmail.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 3f7daf3d7582dc6628ac40a9045dd1bbd80c5f35 ]

When hot-removing memory release_mem_region_adjustable() splits iomem
resources if they are not the exact size of the memory being
hot-deleted. Adding this memory back to the kernel adds a new resource.

Eg a node has memory 0x0 - 0xfffffffff. Hot-removing 1GB from
0xf40000000 results in the single resource 0x0-0xfffffffff being split
into two resources: 0x0-0xf3fffffff and 0xf80000000-0xfffffffff.

When we hot-add the memory back we now have three resources:
0x0-0xf3fffffff, 0xf40000000-0xf7fffffff, and 0xf80000000-0xfffffffff.

This is an issue if we try to remove some memory that overlaps
resources. Eg when trying to remove 2GB at address 0xf40000000,
release_mem_region_adjustable() fails as it expects the chunk of memory
to be within the boundaries of a single resource. We then get the
warning: "Unable to release resource" and attempting to use memtrace
again gives us this error: "bash: echo: write error: Resource
temporarily unavailable"

This patch makes memtrace remove memory in chunks that are always the
same size from an address that is always equal to end_of_memory -
n*size, for some n. So hotremoving and hotadding memory of different
sizes will now not attempt to remove memory that spans multiple
resources.
Signed-off-by: NRashmica Gupta <rashmica.g@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit ee9d21b3b3583712029a0db65a4b7c081d08d3b3 ]

When building with clang crt0's _zimage_start is not marked weak, which
breaks the build when linking the kernel image:

 $ objdump -t arch/powerpc/boot/crt0.o |grep _zimage_start$
 0000000000000058 g       .text  0000000000000000 _zimage_start

 ld: arch/powerpc/boot/wrapper.a(crt0.o): in function '_zimage_start':
 (.text+0x58): multiple definition of '_zimage_start';
 arch/powerpc/boot/pseries-head.o:(.text+0x0): first defined here

Clang requires the .weak directive to appear after the symbol is
declared. The binutils manual says:

 This directive sets the weak attribute on the comma separated list of
 symbol names. If the symbols do not already exist, they will be
 created.

So it appears this is different with clang. The only reference I could
see for this was an OpenBSD mailing list post[1].

Changing it to be after the declaration fixes building with Clang, and
still works with GCC.

 $ objdump -t arch/powerpc/boot/crt0.o |grep _zimage_start$
 0000000000000058  w      .text	0000000000000000 _zimage_start

Reported to clang as https://bugs.llvm.org/show_bug.cgi?id=38921

[1] https://groups.google.com/forum/#!topic/fa.openbsd.tech/PAgKKen2YCYSigned-off-by: NJoel Stanley <joel@jms.id.au>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit dc57aaf95a516f70e2d527d8287a0332c481a226 ]

After changing CPU online status, it will not be sent any IPIs such as in
__flush_cache_all() on software coherency systems. Do this before disabling
local IRQ.
Signed-off-by: NDengcheng Zhu <dzhu@wavecomp.com>
Signed-off-by: NPaul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20571/
Cc: pburton@wavecomp.com
Cc: ralf@linux-mips.org
Cc: linux-mips@linux-mips.org
Cc: rachel.mozes@intel.com
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 1f32061e843205f6fe8404d5100d5adcec334e75 ]

On a decoder instance, after the profile has been parsed from the stream
__v4l2_ctrl_s_ctrl() is called to notify userspace about changes in the
read-only profile control. This ends up calling back into the CODA driver
where a missing check on the s_ctrl caused the profile information that has
just been parsed from the stream to be overwritten with the default
baseline profile.

Later on the driver fails to enable frame reordering, based on the wrong
profile information.

Fixes: 347de126d1da (media: coda: add read-only h.264 decoder
                     profile/level controls)
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Reviewed-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit c5d59528e24ad22500347b199d52b9368e686a42 ]

altera_hw_filt_init() which calls append_internal() assumes
that the node was successfully linked in while in fact it can
silently fail. So the call-site needs to set return to -ENOMEM
on append_internal() returning NULL and exit through the err path.

Fixes: 349bcf02 ("[media] Altera FPGA based CI driver module")
Signed-off-by: NNicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 331d880b35a76b5de0eec8cbcecbf615d758a5f9 ]

In hibmc_drm_fb_create(), when the call to hibmc_framebuffer_init() fails
with error, do not store the error code in the HiBMC device frame-buffer
pointer, as this will be later checked for non-zero value in
hibmc_fbdev_destroy() when our intention is to check for a valid function
pointer.

This fixes the following crash:
[    9.699791] Unable to handle kernel NULL pointer dereference at virtual address 000000000000001a
[    9.708672] Mem abort info:
[    9.711489]   ESR = 0x96000004
[    9.714570]   Exception class = DABT (current EL), IL = 32 bits
[    9.720551]   SET = 0, FnV = 0
[    9.723631]   EA = 0, S1PTW = 0
[    9.726799] Data abort info:
[    9.729702]   ISV = 0, ISS = 0x00000004
[    9.733573]   CM = 0, WnR = 0
[    9.736566] [000000000000001a] user address but active_mm is swapper
[    9.742987] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[    9.748614] Modules linked in:
[    9.751694] CPU: 16 PID: 293 Comm: kworker/16:1 Tainted: G        W         4.19.0-rc4-next-20180920-00001-g9b0012c #322
[    9.762681] Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT21 Nemo 2.0 RC0 04/18/2018
[    9.771915] Workqueue: events work_for_cpu_fn
[    9.776312] pstate: 60000005 (nZCv daif -PAN -UAO)
[    9.781150] pc : drm_mode_object_put+0x0/0x20
[    9.785547] lr : hibmc_fbdev_fini+0x40/0x58
[    9.789767] sp : ffff00000af1bcf0
[    9.793108] x29: ffff00000af1bcf0 x28: 0000000000000000
[    9.798473] x27: 0000000000000000 x26: ffff000008f66630
[    9.803838] x25: 0000000000000000 x24: ffff0000095abb98
[    9.809203] x23: ffff8017db92fe00 x22: ffff8017d2b13000
[    9.814568] x21: ffffffffffffffea x20: ffff8017d2f80018
[    9.819933] x19: ffff8017d28a0018 x18: ffffffffffffffff
[    9.825297] x17: 0000000000000000 x16: 0000000000000000
[    9.830662] x15: ffff0000092296c8 x14: ffff00008939970f
[    9.836026] x13: ffff00000939971d x12: ffff000009229940
[    9.841391] x11: ffff0000085f8fc0 x10: ffff00000af1b9a0
[    9.846756] x9 : 000000000000000d x8 : 6620657a696c6169
[    9.852121] x7 : ffff8017d3340580 x6 : ffff8017d4168000
[    9.857486] x5 : 0000000000000000 x4 : ffff8017db92fb20
[    9.862850] x3 : 0000000000002690 x2 : ffff8017d3340480
[    9.868214] x1 : 0000000000000028 x0 : 0000000000000002
[    9.873580] Process kworker/16:1 (pid: 293, stack limit = 0x(____ptrval____))
[    9.880788] Call trace:
[    9.883252]  drm_mode_object_put+0x0/0x20
[    9.887297]  hibmc_unload+0x1c/0x80
[    9.890815]  hibmc_pci_probe+0x170/0x3c8
[    9.894773]  local_pci_probe+0x3c/0xb0
[    9.898555]  work_for_cpu_fn+0x18/0x28
[    9.902337]  process_one_work+0x1e0/0x318
[    9.906382]  worker_thread+0x228/0x450
[    9.910164]  kthread+0x128/0x130
[    9.913418]  ret_from_fork+0x10/0x18
[    9.917024] Code: a94153f3 a8c27bfd d65f03c0 d503201f (f9400c01)
[    9.923180] ---[ end trace 2695ffa0af5be375 ]---

Fixes: d1667b86 ("drm/hisilicon/hibmc: Add support for frame buffer")
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NXinliang Liu <z.liuxinliang@hisilicon.com>
Signed-off-by: NXinliang Liu <z.liuxinliang@hisilicon.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 30049754ab7c4b6148dd3cd64af7d54850604582 ]

[WHY]
Previously night light forced a full update by
applying a  transfer function update regardless of if it was changed.
This logic was removed,

Now gamma surface updates are only applied when there is also a plane
info update, this does not work in cases such as using the night light
slider.

[HOW]
When moving the night light slider we will perform a full update if
the gamma has changed and there is a surface, even when the surface
has not changed. Also get stream updates in setgamma prior to
update planes and stream.
Signed-off-by: NSivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 481f576c6c21bf0446eaa23623ef0262e9a5387c ]

[Why]

The DISPCLK value was previously requested to be 15% higher for all
ASICs that went through the dce110 bandwidth code path. As part of a
refactoring of dce_clocks and the dce110 set bandwidth codepath this
was removed for power saving considerations.

That change caused display corruption under certain hardware
configurations with Vega10.

[How]

The 15% DISPCLK increase is brought back but only on dce110 for now.
This is should be a temporary workaround until the root cause is sorted
out for why this occurs on Vega (or other ASICs, if reported).
Tested-by: NNick Sarnie <sarnex@gentoo.org>
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 538f66ba204944470a653a4cccc5f8befdf97c22 ]

A DMM timeout "timed out waiting for done" has been observed on DRA7
devices. The timeout happens rarely, and only when the system is under
heavy load.

Debugging showed that the timeout can be made to happen much more
frequently by optimizing the DMM driver, so that there's almost no code
between writing the last DMM descriptors to RAM, and writing to DMM
register which starts the DMM transaction.

The current theory is that a wmb() does not properly ensure that the
data written to RAM is observable by all the components in the system.

This DMM timeout has caused interesting (and rare) bugs as the error
handling was not functioning properly (the error handling has been fixed
in previous commits):

 * If a DMM timeout happened when a GEM buffer was being pinned for
   display on the screen, a timeout error would be shown, but the driver
   would continue programming DSS HW with broken buffer, leading to
   SYNCLOST floods and possible crashes.

 * If a DMM timeout happened when other user (say, video decoder) was
   pinning a GEM buffer, a timeout would be shown but if the user
   handled the error properly, no other issues followed.

 * If a DMM timeout happened when a GEM buffer was being released, the
   driver does not even notice the error, leading to crashes or hang
   later.

This patch adds wmb() and readl() calls after the last bit is written to
RAM, which should ensure that the execution proceeds only after the data
is actually in RAM, and thus observable by DMM.

The read-back should not be needed. Further study is required to understand
if DMM is somehow special case and read-back is ok, or if DRA7's memory
barriers do not work correctly.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>