Negative side effect: needs NR_CPUs pointer array of memory in
CONFIG_HOTPLUG_CPU case.

Still needs userspace track keeping and rewriting of governors if governors
change while a CPU is not active (always the governor at CPU remove time is
restored).

Move of policy->user_policy.governor assignment is just a minor cleanup.
http://bugzilla.kernel.org/show_bug.cgi?id=8671Signed-off-by: NThomas Renninger <trenn@suse.de>
Signed-off-by: NMattia Dongili <malattia@linux.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDave Jones <davej@redhat.com>

There is a frequency scaling issue that I encountered with the performance
governor in combination with CPU hotplug.

In cpufreq.c CPU frequency is reduced to its minimum before the CPU gets
unregistered and set offline.  Does that have a particular reason?

Since the (k8-)governor does not monitor CPU frequency that setting also
applies then to the remaining CPU as well and lets the system run on the
lowest frequency although performance is chose as the policy.
Signed-off-by: NPeter Oruba <peter.oruba@amd.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDave Jones <davej@redhat.com>

Make it compile on UP.
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDave Jones <davej@redhat.com>

This patch contains the overdue removal of X86_SPEEDSTEP_CENTRINO_ACPI.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NDave Jones <davej@redhat.com>

On some motherboards ACPI C3 is available, but it isn't
causing frequency transition on VIA Nehemiah. Longhaul
wasn't working at all earlier, but due to
scaling_cur_speed returning true CPU frequency now, it
looks like CPU is getting stuck at highest frequency
since 2.6.21. I didn't find a reason. Halt is causing
frequency transition.
Signed-off-by: NRafal Bilski <rafalbilski@interia.pl>
Signed-off-by: NDave Jones <davej@redhat.com>

This reverts commit acb11c8b.

It was broken.  We most certainly *do* want the default to be the old
behaviour (and the common case!), instead of breaking everybodys
configuration and making 99% of all people have to override the default.

What were you guys thinking?
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (149 commits)
  USB: ohci-pnx4008: Remove unnecessary cast of return value of kzalloc
  USB: additions to the quirk list
  usb-storage: implement autosuspend
  USB: cdc-acm: add new device id to option driver
  USB: goku_udc trivial cleanups
  USB: usb gadget stack can now -DDEBUG with Kconfig
  usb gadget stack: remove usb_ep_*_buffer(), part 2
  usb gadget stack: remove usb_ep_*_buffer(), part 1
  USB: pxa2xx_udc -- cleanups, mostly removing dma hooks
  USB: pxa2xx_udc: use generic gpio layer
  USB: quirk for samsung printer
  USB: usb/dma doc updates
  USB: drivers/usb/storage/unusual_devs.h whitespace cleanup
  USB: remove Makefile reference to obsolete OHCI_AT91
  USB: io_*: remove bogus termios no change checks
  USB: mos7720: remove bogus no termios change check
  USB: visor and whiteheat: remove bogus termios change checks
  USB: pl2303: remove bogus checks and fix speed support to use tty_get_baud_rate()
  USB: mos7840.c: turn this into a serial driver
  USB: make the usb_device numa_node get assigned from controller
  ...

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Un-break ia64 build

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (76 commits)
  IB: Update MAINTAINERS with Hal's new email address
  IB/mlx4: Implement query SRQ
  IB/mlx4: Implement query QP
  IB/cm: Send no match if a SIDR REQ does not match a listen
  IB/cm: Fix handling of duplicate SIDR REQs
  IB/cm: cm_msgs.h should include ib_cm.h
  IB/cm: Include HCA ACK delay in local ACK timeout
  IB/cm: Use spin_lock_irq() instead of spin_lock_irqsave() when possible
  IB/sa: Make sure SA queries use default P_Key
  IPoIB: Recycle loopback skbs instead of freeing and reallocating
  IB/mthca: Replace memset(<addr>, 0, PAGE_SIZE) with clear_page(<addr>)
  IPoIB/cm: Fix warning if IPV6 is not enabled
  IB/core: Take sizeof the correct pointer when calling kmalloc()
  IB/ehca: Improve latency by unlocking after triggering the hardware
  IB/ehca: Notify consumers of LID/PKEY/SM changes after nondisruptive events
  IB/ehca: Return QP pointer in poll_cq()
  IB/ehca: Change idr spinlocks into rwlocks
  IB/ehca: Refactor sync between completions and destroy_cq using atomic_t
  IB/ehca: Lock renaming, static initializers
  IB/ehca: Report RDMA atomic attributes in query_qp()
  ...

This reverts commit 963bd949.  The
driver _does_ need the networking header files;

	  CC [M]  drivers/net/bnx2.o
	drivers/net/bnx2.c: In function 'bnx2_start_xmit':
	drivers/net/bnx2.c:5177: warning: implicit declaration of function 'tcp_optlen'
	drivers/net/bnx2.c:5181: error: invalid application of 'sizeof' to incomplete type 'struct ipv6hdr'
	drivers/net/bnx2.c:5202: error: invalid application of 'sizeof' to incomplete type 'struct tcphdr'
	drivers/net/bnx2.c:5207: warning: implicit declaration of function 'tcp_hdr'
	drivers/net/bnx2.c:5207: error: invalid type argument of '->'
	make[2]: *** [drivers/net/bnx2.o] Error 1
	make[1]: *** [drivers/net] Error 2
	make: *** [drivers] Error 2

Cc: Ilpo Jävinen <ilpo.jarvinen@helsinki.fi>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove unnecessary cast of return value of kzalloc() in
usb/host/ohci-pnx4008.c
Signed-off-by: NSuresh Jayaraman <sjayaraman@novell.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

this adds some scanners reported to be crashed by autosuspend to
the quirk list.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as930) implements autosuspend for usb-storage.  It is
adapted from a patch by Oliver Neukum.  Autosuspend is allowed except
during LUN scanning, resets, and command execution.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

USB: add new device id to option driver
device is Samsung X180 China cellphone
Signed-off-by: NAndrey Arapov <andrey.arapov@gmail.com>
Acked-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Minor fixes to goku_udc ... whitespace, let -DDEBUG do its thing,
check the return value of device_register(), sparse tweaks.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Although the other USB driver directories got taught how use Kconfig
and the Makefile to enable the debugging messages enabled by -DDEBUG,
the gadget stack was overlooked.

This patch remedies that omission, but doesn't update any drivers to
remove previous idiosyncracies in this area ... other than the RNDIS
code, which defined its own DEBUG() macro in a broken way.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch removes controller driver infrastructure which supported
the now-removed usb_ep_{alloc,free}_buffer() calls.

As can be seen, many of the implementations of this were broken to
various degrees.  Many didn't properly return dma-coherent mappings;
those which did so were necessarily ugly because of bogosity in the
underlying dma_free_coherent() calls ... which on many platforms
can't be called from the same contexts (notably in_irq) from which
their dma_alloc_coherent() sibling can be called.

The main potential downside of removing this is that gadget drivers
wouldn't have specific knowledge that the controller drivers have:
endpoints that aren't dma-capable don't need any dma mappings at all.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove usb_ep_{alloc,free}_buffer() calls, for small dma-coherent buffers.
This patch just removes the interface and its users; later patches will
remove controller driver support.

  - This interface is invariably not implemented correctly in the
    controller drivers (e.g. using dma pools, a mechanism which
    post-dates the interface by several years).

  - At this point no gadget driver really *needs* to use it.  In
    current kernels, any driver that needs such a mechanism could
    allocate a dma pool themselves.

Removing this interface is thus a simplification and improvement.

Note that the gmidi.c driver had a bug in this area; fixed.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Cleanups to the pxa2xx_udc code:

  - Primarily removing unused DMA hooks.
  - One "sparse" warning removed
  - Remove some Lubbock-only LED hooks (for debugging)

That DMA code was never really completed.  It worked, mostly, for IN
transfers (to the host) if they were fortuitously aligned, but that
code was never fully tested.  And it was never coded for OUT transfers
(which is where DMA would really help) ... because of chip errata on
essentially every chip other than the pxa255, and because of design
botches (nothing automated data toggle).  So it's effectively been
dead code for several years now ... no point in keeping it around.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch lets the pxa2xx_udc use the generic gpio layer,
on the relevant PXA and IXP systems.
Signed-off-by: NMilan Svoboda <msvoboda@ra.rockwell.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

this printer does not survive suspension.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch updates some of the documentation about DMA buffer management
for USB, and ways to avoid extra copying.  Our understanding of the issues
has improved over time.

 - Most drivers should *avoid* the dma-coherent allocators.  There are
   a few exceptions (like the HID driver).

 - Some methods are currently commented out; it seems folk writing
   USB drivers aren't doing performance tuning at that level yet.

 - Just avoid highmem; there's no good way to pass an "I can do highmem
   DMA" capability through a driver stack.  This is easy, everything
   already avoids highmem.  But it'd be nice if x86_32 systems with much
   physical memory could use it directly with network adapters and mass
   storage devices.  (Patch, anyone?)
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Following patch removes trailing whitespaces at the ends of lines and converts
smarttabs/whitespaces into real tabs.
Signed-off-by: NS.Caglar Onur <caglar@pardus.org.tr>
Signed-off-by: NPhil Dibowitz <phil@ipom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The MOS driver is "interesting", in a bad kind of 'how the hell did this
get merged' kind of way

- Remove the bogus termios change check
- Remove the duplicate code for half the ioctls
- Remove the supporting code to duplicate the ioctl code
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

So we can use dev_to_node(&usb_dev->dev) later in kmalloc_node to dma buffer
Signed-off-by: NYinghai Lu <yinghai.lu@sun.com>
Cc: Andi Kleen <ak@suse.de>
Acked-by: NChristoph Lameter <clameter@sgi.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix an oops that happens in relation with applying work arounds for buggy
ftdi_sio devices.  The quirks were handled too early because due to changes in
the initialisation of usb serial devices the device was not fully initialised
when the old hook was called.

Addresses bug 8564

Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Low performance USB storage driver: Use list_for_each_entry() instead
of list_for_each()
Signed-off-by: NMatthias Kaehlcke <matthias.kaehlcke@gmail.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Generally, Jens Axboe was against 'default y', so I'll have some patches to
remove it.

Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Make usb autosuspend timers 1sec jiffy aligned.

This helps to reduce the frequency at which the CPU must be taken out of a
lower-power state.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Blackberry devices charge over USB.  By autosuspending the port, they are
not able to charge reliably.
Signed-off-by: NJeremy Katz <katzj@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The Blackberry Pearl (8100) needs similar tweaks as older Blackberry models
to be able to charge when connected via USB.  The Pearl also adds an
additional need to go into a separate mode for fully accessing the device;
do that by default as well.

Changes based on the changes from bcharge in the barry project
(http://barry.sf.net)
Signed-off-by: NJeremy Katz <katzj@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

USB_IAD: Adds support for USB Interface Association Descriptors.

This patch adds support to the USB host stack for parsing, storing, and
displaying Interface Association Descriptors. In /proc/bus/usb/devices
lines starting with A: show the fields in an IAD. In sysfs if an
interface on a USB device is referenced by an IAD the following files
will be added to the sysfs directory for that interface:
iad_bFirstInterface, iad_bInterfaceCount, iad_bFunctionClass, and
iad_bFunctionSubClass, iad_bFunctionProtocol
Signed-off-by: NCraig W. Nadler <craig@nadler.us>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Update the original developer's email addresses at their request.


Cc: Vijaya Kumar <vijaykumar.gn@gmail.com>
Cc: Ajay Kumar <naanuajay@yahoo.com>
Cc: Gurudeva <ngurudeva@yahoo.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The loop in usb_sg_wait() is structured in a way that makes it hard to
tell, when the loop exits, whether or not the last URB submission
succeeded.  This patch (as928) changes it from a "for" loop to a
"while" loop and keeps "i" always equal to the number of successful
submissions.  This fixes an off-by-one error which can show up when
the first URB submission fails.

The patch also removes a couple of lines that initialize fields which
don't need to be initialized.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Root hubs can't be resumed if their parent controller device is still
suspended.  This patch (as925) adds a check for that condition in
hcd_bus_resume() and prevents it from being treated as a fatal
controller failure.

ehci-hcd is updated to add the corresponding test.  Unnecessary
debugging messages are removed from uhci-hcd and dummy-hcd.  The
error return code from dummy-hcd is changed to -ESHUTDOWN, the same as
the others.  ohci-hcd doesn't need any changes.

Suspend handling in the non-PCI host drivers is somewhat hit-and-miss.
This patch shouldn't have any effect on them.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>