Introducing a GEN6_FEAUTRES macro to simplify the struct definitions by
platforms given that most of the features are common. Inspired by the
GEN7_FEATURES macro done by Ben W. and others.

Use it for snb.

CC: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: NCarlos Santa <carlos.santa@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

As recommended by Ville Syrjala removing .is_mobile field from the
platform struct definition for vlv and hsw+ GPUs as there's no need to
make the distinction in later hardware anymore. Keep it for older GPUs
as it is still needed for ilk-ivb.
Signed-off-by: NCarlos Santa <carlos.santa@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

[patch series] Moving all GPU features to the platform struct definition
allows for
	- standard place when adding new features from new platforms
	- possible to see supported features when dumping struct definition
Signed-off-by: NCarlos Santa <carlos.santa@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

Split out the DisplayPort and HDMI pll setup code into separate
functions and refactor the DP code that calculates the pll
so that it doesn't depend on crtc state.
This will be used for acquiring port pll when doing
upfront link training.
Reviewed-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

Split out the DisplayPort and HDMI pll setup code into separate
functions and refactor the DP code does not directly depend on
crtc state, so that the code can be used for upfront link training.
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NJim Bride <jim.bride@linux.intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

Split out of bxt_ddi_pll_select() the logic that calculates the pll
dividers and dpll_hw_state into a new function that doesn't depend on
crtc state. This will be used for enabling the port pll when doing
upfront link training.

v2:
* Refactored code so that bxt_clk_div need not be exported (Durga)
v1:
* Rebased on top of intel_dpll_mgr.c (Durga)
* Initial version from Ander on top of intel_ddi.c
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

Split intel_ddi_pre_enable() into encoder type specific versions that
don't depend on crtc_state. The necessary parameters are passed as
function arguments. This split will be necessary for implementing DP
upfront link training.

v3:
* Rebased onto latest kernel (Manasi)
v2:
* Rebased onto kernel v4.7 (Jim)
Reviewed-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NJim Bride <jim.bride@linux.intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

The value of ddi_pll_sel is derived from the selection of shared dpll,
so just calculate the final value when necessary.

v2: Actually remove it from crtc state and delete remaining usages. (CI)
Reviewed-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

Decouple intel_dp_set_link_params() from struct intel_crtc_state. This
will be useful for implementing DP upfront link training.

v2:
* Rebased on atomic state changes (Manasi)
Reviewed-by: NDurgadoss R <durgadoss.r@intel.com>
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>

This reverts commit 237ed86c.

Our current implementation of live status check (repeat 9 times
with 10ms delays between each attempt as a workaround for
buggy displays) imposes a rather serious penalty, time wise,
on intel_hdmi_detect().  Since we we already skip live status
checks on platforms before gen 7, and since we seem to have
coped quite well before the live status check was introduced
for newer platforms too, the previous behaviour is probably
preferable, at least unless someone can point to a use-case
that the live status check improves (apart from "Bspec says so".)
Signed-off-by: NDavid Weinehall <david.weinehall@linux.intel.com>
Fixes: 237ed86c ("drm/i915: Check live status before reading edid")
Fixes: f8d03ea0 ("drm/i915: increase the tries for HDMI hotplug live status checking")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97139
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94014Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160817124748.31208-1-david.weinehall@linux.intel.com

i915 sometimes needs to disable planes in the middle of an atomic
commit, and then reenable them later in the same commit. Because of
this, we can't make the assumption that the state of the plane actually
changed. Since the state of the plane hasn't actually changed, neither
have it's watermarks. And if the watermarks hasn't changed then we
haven't populated skl_results with anything, which means we'll end up
zeroing out a plane's watermarks in the middle of the atomic commit
without restoring them later.

Simple reproduction recipe:
 - Get a SKL laptop, launch any kind of X session
 - Get two extra monitors
 - Keep hotplugging both displays (so that the display configuration
   jumps from 1 active pipe to 3 active pipes and back)
 - Eventually underrun

Changes since v1:
 - Fix incorrect use of "it's"
Changes since v2:
 - Add reproduction recipe
Signed-off-by: NLyude <cpaul@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 62e0fb88 ("drm/i915/skl: Update plane watermarks atomically during plane updates")
Signed-off-by: NLyude <cpaul@redhat.com>
Testcase: kms_plane
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1472488288-27280-1-git-send-email-cpaul@redhat.com
Cc: drm-intel-fixes@lists.freedesktop.org

We don't have safe 64-bit mmio writes as they are really split into
2x32-bit writes. This tearing is dangerous as the hardware *will*
operate on the intermediate value, requiring great care when assigning.
(See, for example, i965_write_fence_reg.) As such we don't currently use
them and strongly advise not to us them. Go one step further and remove
the 64-bit write vfuncs.

v2: Add some more details to the comment about why WRITE64 is absent,
and why you need to think twice before using READ64.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160906144538.4204-1-chris@chris-wilson.co.uk

Disable 48bit full PPGTT on vGPU too for now.
Signed-off-by: NZhi Wang <zhi.a.wang@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160906040412.1274-3-zhenyuw@linux.intel.com

vGPU capability is handled by GVT-g host driver, not needed to
put extra HW check for vGPU detection. And we'll actually support
vGPU from BDW.
Signed-off-by: NPing Gao <ping.a.gao@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160906040412.1274-2-zhenyuw@linux.intel.com

If we can't grab the breadcrumb's spinlock, possibly due to a driver
deadlock inside the waiters, ignore them. Like hangcheck, error
capturing must work no matter how the driver/GPU dies.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20160906073844.22561-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Some downgraded from DRM_ERROR() to DRM_WARN() or DRM_NOTE(),
a few upgraded from DRM_INFO() to DRM_NOTE() or DRM_WARN(),
and one eliminated completely.

v2: different permutation of levels :)
v3: convert a couple of "this shouldn't happen" messages to WARN()
Signed-off-by: NDave Gordon <david.s.gordon@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

Where we're going to continue regardless of the problem, rather than
fail, then the message should be a WARNing rather than an ERROR.
Signed-off-by: NDave Gordon <david.s.gordon@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

i915_gem_interrupt_info() only looks at mmio registers, and the waiters
under a spinlock. It doesn't need struct_mutex (but does need the rpm
wakelock for mmio access). Maybe useful using get_if_notidle?
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20160903065343.25151-2-chris@chris-wilson.co.ukReviewed-by: NMatthew Auld <matthew.auld@intel.com>

i915_gem_seqno_info() supplies its own spinlocks to access the waiters,
and doesn't need any GGTT or mmio access.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20160903065343.25151-1-chris@chris-wilson.co.ukReviewed-by: NMatthew Auld <matthew.auld@intel.com>

Currently when checking for fused off EUs we may ignore the EU count in
an enabled slice if there is any disabled slice preceding the enabled
one (with a lower slice ID). Perhaps this can't happen in reality, but
there is no reason to have this assumption built-in, the code is clearer
without it.
Reviewed-by: NRobert Bragg <robert@sixbynine.org>
Reviewed-by: NBen Widawsky <benjamin.widawsky@intel.com>
Tested-by: NBen Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1472659987-10417-8-git-send-email-imre.deak@intel.com

Reviewed-by: NRobert Bragg <robert@sixbynine.org>
Reviewed-by: NBen Widawsky <benjamin.widawsky@intel.com>
Tested-by: NBen Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1472659987-10417-7-git-send-email-imre.deak@intel.com

In an upcoming patch we'll need the actual mask of subslices in addition
to their count, so convert the subslice_per_slice field to a mask.
Also we can easily calculate subslice_total from the other fields, so
instead of storing a cached version of this, add a helper to calculate
it.

v2:
- Use hweight8() on u8 typed vars instead of hweight32(). (Ben)

Reviewed-by: Robert Bragg <robert@sixbynine.org> (v1)
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Tested-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Signed-off-by: NImre Deak <imre.deak@intel.com>

In an upcoming patch we'll need the actual mask of slices in addition to
their count, so replace the count field with a mask.

v2:
- Use hweight8() on u8 typed vars instead of hweight32(). (Ben)

Reviewed-by: Robert Bragg <robert@sixbynine.org> (v1)
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Tested-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Signed-off-by: NImre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1472659987-10417-5-git-send-email-imre.deak@intel.com

Reviewed-by: NRobert Bragg <robert@sixbynine.org>
Reviewed-by: NBen Widawsky <benjamin.widawsky@intel.com>
Tested-by: NBen Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1472659987-10417-4-git-send-email-imre.deak@intel.com

Move all slice/subslice/eu related properties to the sseu_dev_info
struct.

No functional change.

v2:
- s/info/sseu/ based on the new struct name. (Ben)

Reviewed-by: Robert Bragg <robert@sixbynine.org> (v1)
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Tested-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Signed-off-by: NImre Deak <imre.deak@intel.com>

The data in this struct is provided both by getting the
slice/subslice/eu features available on a given platform and the actual
runtime state of these same features which depends on the HW's current
power saving state.

Atm members of this struct are duplicated in sseu_dev_status and
intel_device_info. For clarity and code reuse we can share one struct
for both of the above purposes. This patch only moves the struct to the
header file, the next patch will convert users of intel_device_info to
use this struct too.

Instead of unsigned int u8 is used now, which is big enough and is used
anyway in intel_device_info.

No functional change.

v2:
- s/stat/sseu/ based on the new struct name (Ben)

Reviewed-by: Robert Bragg <robert@sixbynine.org> (v1)
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Tested-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Signed-off-by: NImre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1472659987-10417-2-git-send-email-imre.deak@intel.com

Rather than having a separate case for each value where we just return
a hardcoded value = 1, we lump them all together and rely on the awesome
case-fallthrough feature of C.

Fix all feature macros to pass dev_priv instead of dev while at it,
and use INTEL_GEN() instead of INTEL_INFO()->gen.
Signed-off-by: NDavid Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160902104617.29089-1-david.weinehall@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

The error state itself is guarded by a spinlock (admittedly even that is
overkill for a single pointer!) and doesn't require us to take the
struct_mutex in the debugfs/sysfs interface. Removing the struct_mutex
removes one more potential blockage when trying to debug a deadlock.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20160901205510.31307-1-chris@chris-wilson.co.uk
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com

Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Use atomic type and operands for dev_priv->mm.bsd_engine_dispatch_index
to avoid one struct_mutex locking scenario.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Zhao Yakui <yakui.zhao@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1472731101-21982-1-git-send-email-joonas.lahtinen@linux.intel.com

Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Don't consider enabled but zero duty cycle backlight disabled. Clamp
level between min and max for sanity.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471939811-9817-1-git-send-email-maarten.lankhorst@linux.intel.comSigned-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

The mentioned commit changes intel_display_crc_init to take a dev_priv,
but forgets to change the stub.

Cc: David Weinehall <david.weinehall@linux.intel.com>
Fixes: 36cdd013 ("drm/i915: debugfs spring cleaning")
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-and-by: NKim Lidström <kim@dxtr.im>
Link: http://patchwork.freedesktop.org/patch/msgid/1472116022-17598-1-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDavid Weinehall <david.weinehall@linux.intel.com>

Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1472116022-17598-2-git-send-email-maarten.lankhorst@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

The last user of for_each_intel_crtc_masked macro was removed in

commit 0a9ab303
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date:   Tue Apr 21 17:13:04 2015 +0300

    drm/i915: Remove all *_pipes flags from modeset

Get rid of the unused macro.

Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1472126651-13825-1-git-send-email-jani.nikula@intel.com

Rather than walk the full array of engines checking whether each is in
the mask in turn, we can use the mask to jump to the right engines. This
should quicker for a sparse array of engines or mask, whilst generating
smaller code:

   text	   data	    bss	    dec	    hex	filename
1251010	   4579	    800	1256389	 132bc5	drivers/gpu/drm/i915/i915.ko
1250530	   4579	    800	1255909	 1329e5	drivers/gpu/drm/i915/i915.ko

The downside is that we have to pass in a temporary, alas no C99
iterators yet.

[P.S. Joonas doesn't like having to pass extra temporaries into the
macro, and even less that I called them tmp. As yet, we haven't found a
macro that avoids passing in a temporary that is smaller. We probably
will get C99 iterators first!]
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160827075401.16470-2-chris@chris-wilson.co.uk

As we know by inspection whether any engine is still busy as we retire
all the requests, we can pass that information back via return value
rather than check again afterwards.

v2: A little more polish missed in patch splitting
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160827075401.16470-1-chris@chris-wilson.co.uk

With full-ppgtt, we want the user to have full control over their memory
layout, with a separate instance per context. Forcing them to use a
shared memory layout for !RCS not only duplicates the amount of work we
have to do, but also defeats the memory segregation on offer.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20160822080350.4964-4-chris@chris-wilson.co.ukReviewed-by: NJohn Harrison <john.c.harrison@intel.com>
Reviewed-by: NThomas Daniel <thomas.daniel@intel.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

According to the CI test machines, SNB also uses the
GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE value to report a bad
GEN6_PCODE_MIN_FREQ_TABLE request.

[  157.744641] WARNING: CPU: 5 PID: 9238 at
drivers/gpu/drm/i915/intel_pm.c:7760 sandybridge_pcode_write+0x141/0x200 [i915]
[  157.744642] Missing switch case (16) in gen6_check_mailbox_status
[  157.744642] Modules linked in: snd_hda_intel i915 ax88179_178a usbnet mii x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec snd_hwdep snd_hda_core mei_me lpc_ich snd_pcm mei broadcom bcm_phy_lib tg3 ptp pps_core [last unloaded: vgem]
[  157.744658] CPU: 5 PID: 9238 Comm: drv_hangman Tainted: G     U  W 4.8.0-rc3-CI-CI_DRM_1589+ #1
[  157.744658] Hardware name: Dell Inc. XPS 8300  /0Y2MRG, BIOS A06 10/17/2011
[  157.744659]  0000000000000000 ffff88011f093a98 ffffffff81426415 ffff88011f093ae8
[  157.744662]  0000000000000000 ffff88011f093ad8 ffffffff8107d2a6 00001e50810d3c9f
[  157.744663]  ffff880128680000 0000000000000008 0000000000000000 ffff88012868a650
[  157.744665] Call Trace:
[  157.744669]  [<ffffffff81426415>] dump_stack+0x67/0x92
[  157.744672]  [<ffffffff8107d2a6>] __warn+0xc6/0xe0
[  157.744673]  [<ffffffff8107d30a>] warn_slowpath_fmt+0x4a/0x50
[  157.744685]  [<ffffffffa0029831>] sandybridge_pcode_write+0x141/0x200 [i915]
[  157.744697]  [<ffffffffa002a88a>] intel_enable_gt_powersave+0x64a/0x1330 [i915]
[  157.744712]  [<ffffffffa006b4cb>] ? i9xx_emit_request+0x1b/0x80 [i915]
[  157.744725]  [<ffffffffa0055ed3>] __i915_add_request+0x1e3/0x370 [i915]
[  157.744738]  [<ffffffffa00428bd>] i915_gem_do_execbuffer.isra.16+0xced/0x1b80 [i915]
[  157.744740]  [<ffffffff811a232e>] ? __might_fault+0x3e/0x90
[  157.744752]  [<ffffffffa0043b72>] i915_gem_execbuffer2+0xc2/0x2a0 [i915]
[  157.744753]  [<ffffffff815485b7>] drm_ioctl+0x207/0x4c0
[  157.744765]  [<ffffffffa0043ab0>] ? i915_gem_execbuffer+0x360/0x360 [i915]
[  157.744767]  [<ffffffff810ea4ad>] ?  debug_lockdep_rcu_enabled+0x1d/0x20
[  157.744769]  [<ffffffff811fe09e>] do_vfs_ioctl+0x8e/0x680
[  157.744770]  [<ffffffff811a2377>] ? __might_fault+0x87/0x90
[  157.744771]  [<ffffffff811a232e>] ? __might_fault+0x3e/0x90
[  157.744773]  [<ffffffff810d3df2>] ?  trace_hardirqs_on_caller+0x122/0x1b0
[  157.744774]  [<ffffffff811fe6cc>] SyS_ioctl+0x3c/0x70
[  157.744776]  [<ffffffff8180fe69>] entry_SYSCALL_64_fastpath+0x1c/0xac

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97491
Fixes: 87660502 ("drm/i915/gen6+: Interpret mailbox error flags")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Lyude <cpaul@redhat.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Link: http://patchwork.freedesktop.org/patch/msgid/20160826105926.3413-1-chris@chris-wilson.co.ukAcked-by: NMika Kuoppala <mika.kuoppala@intel.com>

The eDP backlight and panel enable/disable delays are quite
useful to know when measuring time consumed by suspend/resume,
and while the information is printed to the kernel log as debug
messages, having this information in debugfs makes things easier.
Signed-off-by: NDavid Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160823092356.7610-1-david.weinehall@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>