Impact: fix build

lib/decompress_inflate.c depends on slab.h without including it:

    CC      lib/decompress_inflate.o
  lib/decompress_inflate.c: In function ‘gunzip’:
  lib/decompress_inflate.c:45: error: implicit declaration of function ‘kmalloc’
  lib/decompress_inflate.c:45: warning: assignment makes pointer from integer without a cast
  lib/decompress_inflate.c:57: warning: assignment makes pointer from integer without a cast
  lib/decompress_inflate.c:65: warning: assignment makes pointer from integer without a cast
  lib/decompress_inflate.c:71: warning: assignment makes pointer from integer without a cast
  lib/decompress_inflate.c:154: error: implicit declaration of function ‘kfree’
  make[1]: *** [lib/decompress_inflate.o] Error 1
  make: *** [lib/] Error 2

It gets included implicitly currently - but this will not be the
case with upcoming kmemtrace changes.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
LKML-Reference: <1237886030.25315.47.camel@penberg-laptop>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

fs/squashfs/export.c depends on slab.h without including it:

    CC      fs/squashfs/export.o
  fs/squashfs/export.c: In function ‘squashfs_read_inode_lookup_table’:
  fs/squashfs/export.c:133: error: implicit declaration of function ‘kmalloc’
  fs/squashfs/export.c:133: warning: assignment makes pointer from integer without a cast
  fs/squashfs/export.c:143: error: implicit declaration of function ‘kfree’
  make[1]: *** [fs/squashfs/export.o] Error 1
  make: *** [fs/squashfs/] Error 2

It gets included implicitly currently - but this will not be the
case with upcoming kmemtrace changes.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
LKML-Reference: <1237884999.25315.41.camel@penberg-laptop>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

fs/befs/debug.c depends on slab.h without including it. Upcoming
changes for kmemtrace would break the build:

    CC      fs/befs/debug.o
  fs/befs/debug.c: In function ‘befs_error’:
  fs/befs/debug.c:31: error: implicit declaration of function ‘kmalloc’
  fs/befs/debug.c:31: warning: initialization makes pointer from integer without a cast
  fs/befs/debug.c:42: error: implicit declaration of function ‘kfree’
  fs/befs/debug.c: In function ‘befs_warning’:
  fs/befs/debug.c:49: warning: initialization makes pointer from integer without a cast
  fs/befs/debug.c: In function ‘befs_debug’:
  fs/befs/debug.c:73: warning: assignment makes pointer from integer without a cast
  make[1]: *** [fs/befs/debug.o] Error 1
  make: *** [fs/befs/] Error 2

So add the dependency explicitly.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
LKML-Reference: <1237884230.25315.33.camel@penberg-laptop>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

We want to remove percpu.h from rcupdate.h (for upcoming kmemtrace
changes), but this is not possible currently without breaking the
build because key.h has an implicit include file dependency on
rwsem.h:

    CC [M]  fs/cifs/cifs_spnego.o
  In file included from include/keys/user-type.h:15,
                   from fs/cifs/cifs_spnego.c:24:
  include/linux/key.h:128: error: field ‘sem’ has incomplete type
  make[2]: *** [fs/cifs/cifs_spnego.o] Error 1
  make[1]: *** [fs/cifs] Error 2
  make: *** [fs] Error 2

Fix it by making the dependency explicit.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
LKML-Reference: <1237884886.25315.39.camel@penberg-laptop>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

We want to remove percpu.h from rcupdate.h (for upcoming kmemtrace
changes), but this is not possible currently without breaking the
build because fdtable.h has an implicit include file dependency: it
uses __init does not include init.h.

This can cause build failures on non-x86 architectures:

 /home/mingo/tip/include/linux/fdtable.h:66: error: expected '=', ',',
 ';', 'asm' or '__attribute__' before 'files_defer_init'
 make[2]: *** [fs/locks.o] Error 1

We got this header included indirectly via rcupdate.h's percpu.h
inclusion - but if that is not there the build will break.

Fix it.

Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: paulmck@linux.vnet.ibm.com
LKML-Reference: <1237898630.25315.83.camel@penberg-laptop>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

We want to remove percpu.h from rcupdate.h (for upcoming kmemtrace
changes), but this is not possible currently without breaking the
build because fs.h has an implicit include file depedency: it
uses PAGE_SIZE but does not include asm/page.h which defines it.

This problem gets masked in practice because most fs.h using sites
use rcupreempt.h (and other headers) which includes percpu.h which
brings in asm/page.h indirectly.

We cannot add asm/page.h to asm/fs.h because page.h is not an
exported header.

Move simple_transaction_set() to the other simple-transaction
file helpers in fs/libfs.c.

This removes the include file hell and also reduces
kernel size a bit.
Acked-by: NAl Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: paulmck@linux.vnet.ibm.com
LKML-Reference: <1237898630.25315.83.camel@penberg-laptop>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

We want to remove percpu.h from rcupdate.h (for upcoming kmemtrace
changes), but this is not possible currently without breaking the
build because fs.h has implicit include file depedencies: it uses
GFP_* types in inlines but does not include gfp.h.

In practice most fs.h using .c files get gfp.h included implicitly,
via an indirect route: via rcupdate.h inclusion - so this underlying
problem gets masked in practice.

So we want to solve fs.h's dependency on gfp.h.

gfp.h can not be included here directly because it is not exported and it
would break the build the following way:

  /home/mingo/tip/usr/include/linux/bsg.h:11: found __[us]{8,16,32,64} type without #include <linux/types.h>
  /home/mingo/tip/usr/include/linux/fs.h:11: included file 'linux/gfp.h' is not exported
  make[3]: *** [/home/mingo/tip/usr/include/linux/.check] Error 1
  make[2]: *** [linux] Error 2

As suggested by Alexey Dobriyan, move alloc_secdata() and free_secdata()
to linux/security.h - they belong there. This also cleans fs.h of GFP_*
usage.
Suggested-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
LKML-Reference: <1237906803.25315.96.camel@penberg-laptop>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Today's linux-next build (powerpc ppc64_defconfig) failed like this:

 In file included from net/core/skbuff.c:69:
 include/trace/skb.h:4: error: expected ')' before '(' token
 include/trace/skb.h:4: error: expected ')' before '(' token
 [...]

Caused by commit 2939b046 ("tracing:
replace TP<var> with TP_<var>") from the tracing tree interacting with
commit 4893d39e ("Network Drop Monitor:
Add trace declaration for skb frees") from the net tree.
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Today's linux-next build (powerpc allyesconfig) failed like this:

arch/powerpc/kernel/ftrace.c: In function 'prepare_ftrace_return':
arch/powerpc/kernel/ftrace.c:612: warning: passing argument 3 of 'ftrace_push_return_trace' makes pointer from integer without a cast
arch/powerpc/kernel/ftrace.c:612: error: too many arguments to function 'ftrace_push_return_trace'

Caused by commit 5d1a03dc
("function-graph: moved the timestamp from arch to generic code") from
the tracing tree which (removed an argument from
ftrace_push_return_trace()) interacting with commit
6794c782 ("powerpc64: port of the
function graph tracer") from the powerpc tree.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: <linuxppc-dev@ozlabs.org>
LKML-Reference: <20090327230834.93d0221d.sfr@canb.auug.org.au>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Conflicts:
	include/linux/slub_def.h
	lib/Kconfig.debug
	mm/slob.c
	mm/slub.c

* 'for-linus' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (58 commits)
  SUNRPC: Ensure IPV6_V6ONLY is set on the socket before binding to a port
  NSM: Fix unaligned accesses in nsm_init_private()
  NFS: Simplify logic to compare socket addresses in client.c
  NFS: Start PF_INET6 callback listener only if IPv6 support is available
  lockd: Start PF_INET6 listener only if IPv6 support is available
  SUNRPC: Remove CONFIG_SUNRPC_REGISTER_V4
  SUNRPC: rpcb_register() should handle errors silently
  SUNRPC: Simplify kernel RPC service registration
  SUNRPC: Simplify svc_unregister()
  SUNRPC: Allow callers to pass rpcb_v4_register a NULL address
  SUNRPC: rpcbind actually interprets r_owner string
  SUNRPC: Clean up address type casts in rpcb_v4_register()
  SUNRPC: Don't return EPROTONOSUPPORT in svc_register()'s helpers
  SUNRPC: Use IPv4 loopback for registering AF_INET6 kernel RPC services
  SUNRPC: Set IPV6ONLY flag on PF_INET6 RPC listener sockets
  NFS: Revert creation of IPv6 listeners for lockd and NFSv4 callbacks
  SUNRPC: Remove @family argument from svc_create() and svc_create_pooled()
  SUNRPC: Change svc_create_xprt() to take a @family argument
  SUNRPC: svc_setup_socket() gets protocol family from socket
  SUNRPC: Pass a family argument to svc_register()
  ...

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (33 commits)
  ext4: Regularize mount options
  ext4: fix locking typo in mballoc which could cause soft lockup hangs
  ext4: fix typo which causes a memory leak on error path
  jbd2: Update locking coments
  ext4: Rename pa_linear to pa_type
  ext4: add checks of block references for non-extent inodes
  ext4: Check for an valid i_mode when reading the inode from disk
  ext4: Use WRITE_SYNC for commits which are caused by fsync()
  ext4: Add auto_da_alloc mount option
  ext4: Use struct flex_groups to calculate get_orlov_stats()
  ext4: Use atomic_t's in struct flex_groups
  ext4: remove /proc tuning knobs
  ext4: Add sysfs support
  ext4: Track lifetime disk writes
  ext4: Fix discard of inode prealloc space with delayed allocation.
  ext4: Automatically allocate delay allocated blocks on rename
  ext4: Automatically allocate delay allocated blocks on close
  ext4: add EXT4_IOC_ALLOC_DA_BLKS ioctl
  ext4: Simplify delalloc code by removing mpage_da_writepages()
  ext4: Save stack space by removing fake buffer heads
  ...

Also ensure that we use the protocol family instead of the address
family when calling sock_create_kern().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This fixes unaligned accesses in nsm_init_private() when
creating nlm_reboot keys.
Signed-off-by: NMans Rullgard <mans@mansr.com>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: try to free metadata pages when we free btree blocks
  Btrfs: add extra flushing for renames and truncates
  Btrfs: make sure btrfs_update_delayed_ref doesn't increase ref_mod
  Btrfs: optimize fsyncs on old files
  Btrfs: tree logging unlink/rename fixes
  Btrfs: Make sure i_nlink doesn't hit zero too soon during log replay
  Btrfs: limit balancing work while flushing delayed refs
  Btrfs: readahead checksums during btrfs_finish_ordered_io
  Btrfs: leave btree locks spinning more often
  Btrfs: Only let very young transactions grow during commit
  Btrfs: Check for a blocking lock before taking the spin
  Btrfs: reduce stack in cow_file_range
  Btrfs: reduce stalls during transaction commit
  Btrfs: process the delayed reference queue in clusters
  Btrfs: try to cleanup delayed refs while freeing extents
  Btrfs: reduce stack usage in some crucial tree balancing functions
  Btrfs: do extent allocation and reference count updates in the background
  Btrfs: don't preallocate metadata blocks during btrfs_search_slot

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (59 commits)
  ide-floppy: do not complete rq's prematurely
  ide: be able to build pmac driver without IDE built-in
  ide-pmac: IDE cable detection on Apple PowerBook
  ide: inline SELECT_DRIVE()
  ide: turn selectproc() method into dev_select() method (take 5)
  MAINTAINERS: move old ide-{floppy,tape} entries to CREDITS (take 2)
  ide: move data register access out of tf_{read|load}() methods (take 2)
  ide: call {in|out}put_data() methods from tf_{read|load}() methods (take 2)
  ide-io-std: shorten ide_{in|out}put_data()
  ide: rename IDE_TFLAG_IN_[HOB_]FEATURE
  ide: turn set_irq() method into write_devctl() method
  ide: use ATA_HOB
  ide-disk: use ATA_ERR
  ide: add support for CFA specified transfer modes (take 3)
  ide-iops: only clear DMA words on setting DMA mode
  ide: identify data word 53 bit 1 doesn't cover words 62 and 63 (take 3)
  au1xxx-ide: auide_{in|out}sw() should be static
  ide-floppy: use ide_pio_bytes()
  ide-{floppy,tape}: fix padding for PIO transfers
  ide: remove CONFIG_BLK_DEV_IDEDOUBLER config option
  ...

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (88 commits)
  PCI: fix HT MSI mapping fix
  PCI: don't enable too much HT MSI mapping
  x86/PCI: make pci=lastbus=255 work when acpi is on
  PCI: save and restore PCIe 2.0 registers
  PCI: update fakephp for bus_id removal
  PCI: fix kernel oops on bridge removal
  PCI: fix conflict between SR-IOV and config space sizing
  powerpc/PCI: include pci.h in powerpc MSI implementation
  PCI Hotplug: schedule fakephp for feature removal
  PCI Hotplug: rename legacy_fakephp to fakephp
  PCI Hotplug: restore fakephp interface with complete reimplementation
  PCI: Introduce /sys/bus/pci/devices/.../rescan
  PCI: Introduce /sys/bus/pci/devices/.../remove
  PCI: Introduce /sys/bus/pci/rescan
  PCI: Introduce pci_rescan_bus()
  PCI: do not enable bridges more than once
  PCI: do not initialize bridges more than once
  PCI: always scan child buses
  PCI: pci_scan_slot() returns newly found devices
  PCI: don't scan existing devices
  ...

Fix trivial append-only conflict in Documentation/feature-removal-schedule.txt

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] cio: online_store - trigger recognition for boxed devices
  [S390] cio: disallow online setting of device in transient state
  [S390] cio: introduce notifier for boxed state
  [S390] cio: introduce ccw_device_schedule_sch_unregister
  [S390] cio: wake up on failed recognition
  [S390] fix hypfs build failure
  [PATCH] sysrq: include interrupt.h instead of irq.h

The current logic for dmi matching in efifb does not allow efifb to load
on all hardware that we can dmi match for.

For a real world example, boot with elilo (3.7 or 3.8 vanilla) and on a
Apple (MacBook) and EFI framebuffer driver will not load (you will have no
video).  This specific hardware is efi v1.10, so we have UGA and not GOP.
Without special bootloader magic (i.e.  extra elilo patches for UGA
graphics detection) no screen info will be passed to the kernel and as a
result efifb will not load.

This patch allows the dmi match to happen by moving it to earlier in
efifb_init, and sets the video type (in set_system) so that efifb can load
when we have a valid dmi match and already know the specifics of the
hardware.

Without this patch the efifb driver will fail to load in the event screen
info is not found and passed in by the bootloader, being that we will
never get to look for a dmi match.  A primary reason for matching with dmi
is because not all bootloaders detect the video info properly.  The
solution is that in the event of a dmi match, we should set
screen_info.orig_video_isVGA.  Most bootloaders fail to set screen info on
Apple hardware, and this is a big problem for people who use Apple
hardware.

Tested on a MacBook SantaRosa with elilo-3.8 (vanilla) and resolves the
issue, the dmi match now works, EFI framebuffer now loads and video works.
Signed-off-by: NBrian Maly <bmaly@redhat.com>
Acked-by: NHuang Ying <ying.huang@intel.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Chandramouli Narayanan <mouli@linux.intel.com>
Acked-by: NPeter Jones <pjones@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove Kconfig option for tridentfb acceleration.  The acceleration can be
switched off with modules "noaccel" parameter.

The acceleration for Trident chips was fixed in the 2.6.27 kernel.

Also, add CyberXXX and CyberBlade names to Kconfig option's name.  It should
make easier to find the tridentfb choice for cyblafb driver's users.  The
cyblafb driver has been replaced by the tridentfb driver.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Save one fifo entry on cursor enabling and disabling.

Save another fifo entry for FB_CUR_SETPOS operation by removing redundant one.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A hardware cursor is left enabled in the fb_set_par() which is called when a
new console is created.  This is inconsistent with software cursor's
behaviour.

Also, this makes a hardware cursor always visible in the Xfbdev (Xorg kdrive)
server.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Cc: Risto Suominen <risto.suominen@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove mutex from the nvidiafb_open/nvidiafb_release functions as these
operations are mutexed at fb layer.
Signed-off-by: NAlessio Igor Bogani <abogani@texware.it>
Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add suspend/resume for the Acer Travelmate 290D/292LMi with the following
graphic-chip:

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350
[Mobility Radeon 9600 M10] [1002:4e50] (prog-if 00 [VGA controller])
	Subsystem: Acer Incorporated [ALI] TravelMate 290 [1025:005a]
	Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 10
	Memory at a8000000 (32-bit, prefetchable) [size=128M]
	I/O ports at c100 [size=256]
	Memory at e0010000 (32-bit, non-prefetchable) [size=64K]
	[virtual] Expansion ROM at a0000000 [disabled] [size=128K]
	Capabilities: [58] AGP version 2.0
	Capabilities: [50] Power Management version 2
	Kernel driver in use: radeonfb
	Kernel modules: radeonfb
Signed-off-by: NWolfgang Kroener <lkml@azog.de>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The blank operation should receive FB_BLANK_POWERDOWN, not VESA_POWERDOWN.
Signed-off-by: NFelipe Contreras <felipe.contreras@nokia.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Andrea Righi <righi.andrea@gmail.com>
Acked-by: NTrilok Soni <soni.trilok@gmail.com>
Cc: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If the vbemode option is used, uvesafb calls fb_get_mode() without first
setting the resolution in info->var.  This results in a division by zero
in fb_get_mode(), as evidenced e.g.  in [1].  Fix this by ensuring the
info->var structure is populated before fb_get_mode() is called.

[1] http://bugzilla.kernel.org/show_bug.cgi?id=11661#c37Signed-off-by: NMichal Januszewski <spock@gentoo.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A tridentfb driver has all the functionality of the cyblafb driver without
the bugs of the latter.

Changes to the tridentfb driver:

- FBINFO_READS_FAST added to the tridentfb.  The cyblafb used a blitter
  for scrolling which is faster than color expansion on Cyberblade
  chipsets.  The blitter is slower on a discrete Blade3D core.  Use the
  blitter for scrolling in the tridentfb only for integrated Blade3D
  cores.  Now, scrolling speed is about equal for the tridentfb and the
  cyblafb.

- a copyright notice addition is done on request of Jani Monoses (the
  first author of the tridentfb).

Tested on AGP Blade3D card and PCChips
M787CLR motherboard: VIA C3 cpu +
VT8601 north  bridge (aka Cyberblade/i1).
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Jani Monoses" <jani@ubuntu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add support for the newer Samsung devices, such as found in the S3C2443,
S3C6400 or S3C6410 series SoC.

It currently does not support all the alpha- or chroma-key options but it
will support more exporting more than one framebuffer ready for adding
overlay and blending functions.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is no entry for n411.c to be built, include one in Makefile.
Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br>
Cc: Jaya Kumar <jayakumar.lkml@gmail.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Otherwise this will already return 0 if iteration MAXLOOP-2 occurs in the
first loop.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Cc: Joseph Chan <josephchan@via.com.tw>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Acked-by: NMichal Januszewski <michalj@gmail.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Acked-by: NMichal Januszewski <michalj@gmail.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Acked-by: NOndrej Zajicek <santiago@crfreenet.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- fix cmap leak in removal path
 - fix cmap leak when register_framebuffer fails
 - check return value of fb_alloc_cmap
 - don't continue with driver setup if register_framebuffer fails

[krzysztof.h1@wp.pl: spotted missing iounmap]
[randy.dunlap@oracle.com: move data declaration before any code]
Signed-off-by: NAndres Salomon <dilinger@debian.org>
Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With for(div = 0; div < max_clk_div; div++) { ... } div reaches max_clk_div.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Cc: Joe Perches <joe@perches.com>
Acked-by: NTrilok Soni <soni.trilok@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The s1d13xxx chip provides two values of identification value: the
Production id (e.g 13506/13505/13806..) and a revision number 0,1,2,3).
Together these can help us to differentiate between similiar setups.

This patch adds the proper way of grabbing both those values and save them
for future reference (in order to decide what functions a card supports,
e.g acceleration).

We also move away from the concept of all s1d13xxx = s1d13806 when we
really support alot more.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: simplify s1d13xxxfb_probe()]
Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With a postfix decrement t reaches -1 on timeout which results in a
return of 0.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAndres Salomon <dilinger@debian.org>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- fix cmap leak in removal path

- fix cmap leak when register_framebuffer fails
Signed-off-by: NAndres Salomon <dilinger@debian.org>
Acked-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>