The IPMI driver include file needs to include compiler.h so it has definitions
for __user and such.
Signed-off-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There are some interactions between IPMI NMI timeouts and the other operations
of the IPMI driver.  This make sure those interactions are handled properly.
Signed-off-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix some problems with the high-res timer support.
Signed-off-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

IPMI allows multiple IPMB channels on a single interface, and each channel
might have a different IPMB address.  However, the driver has only one IPMB
address that it uses for everything.  This patch adds new IOCTLS and a new
internal interface for setting per-channel IPMB addresses and LUNs.  New
systems are coming out with support for multiple IPMB channels, and they are
broken without this patch.
Signed-off-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch replaces homebrew DMI scanning code in IPMI System Interface driver
with dmi_find_device() call.
Signed-off-by: NAndrey Panin <pazke@donpac.ru>
Cc: Corey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch introduces a memory-leak tracking version of kzalloc for ALSA.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Jaroslav Kysela <perex@suse.cz>
Signed-off-by: NJiri Slaby <xslaby@fi.muni.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch converts kcalloc(1, ...) calls to use the new kzalloc() function.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch converts kcalloc(1, ...) calls to use the new kzalloc() function.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch converts kcalloc(1, ...) calls to use the new kzalloc() function.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch converts kcalloc(1, ...) calls to use the new kzalloc() function.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch converts kcalloc(1, ...) calls to use the new kzalloc() function.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch converts kcalloc(1, ...) calls to use the new kzalloc() function.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch introduces a kzalloc wrapper and converts kernel/ to use it.  It
saves a little program text.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Background:

	1) dmi_check_system() returns the count of the number of
	   matches.  Zero thus means no matches.
	2) A match callback can return nonzero to stop the match
	   checking.

Bug: The count is incremented after we check for the nonzero return value,
so it does not reflect the actual count.  We could say this is intended,
for some dumb reason, except that it means that a match on the first check
returns zero--no matches--if the callback returns nonzero.

Attached patch implements the count before calling the callback and thus
before potentially short-circuiting.
Signed-off-by: NRobert Love <rml@novell.com>
Cc: Andrey Panin <pazke@donpac.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds onboard devices and IPMI BMC discovery into DMI scan code.
Drivers can use dmi_find_device() function to search for devices by type and
name.
Signed-off-by: NAndrey Panin <pazke@donpac.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch changes dmi_string() function to allocate string copy by itself, to
avoid code duplication in the next patch.
Signed-off-by: NAndrey Panin <pazke@donpac.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

DMI debugging code is unused for ages.  This patch removes it.
Signed-off-by: NAndrey Panin <pazke@donpac.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

After elimination of central DMI blacklist dmi_scan_machine() function became
a wrapper for dmi_iterate().  This patch moves some code around to kill
unneeded function.
Signed-off-by: NAndrey Panin <pazke@donpac.ru>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

cifs_create() did totally the wrong thing with nd->intent.open.flags:
it interpreted nd->intent.open.flags as the original open flags, not
the one transformed for open_namei().  Also it used the intent data
even if it was not filled in (if called from sys_mknod()).
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Cc: <viro@parcelfarce.linux.theplanet.co.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Steven French <sfrench@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

64 bit architectures all implement their own compatibility sys_open(),
when in fact the difference is simply not forcing the O_LARGEFILE
flag.  So use the a common function instead.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Cc: <viro@parcelfarce.linux.theplanet.co.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Extract common code used by ptrace_attach() and may_ptrace_attach()
into a separate function.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Cc: <viro@parcelfarce.linux.theplanet.co.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch fixes wrongly placed elements in the pid_directory_inos
enum.  Also add comment so this mistake is not repeated.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Cc: <viro@parcelfarce.linux.theplanet.co.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch cleans up proc_cwd_link() and proc_root_link() by factoring
out common code into get_fs_struct().
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Cc: <viro@parcelfarce.linux.theplanet.co.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Extract common code into inline functions to make reading easier.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Cc: <viro@parcelfarce.linux.theplanet.co.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove unused ia_attr_flags from struct iattr, and related defines.
Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch removes 1 whole entry, which is no longer maintained and 1
e-mail, which is not right.  [comtrol was posted by Rolf Eike Beer]
Signed-off-by: NRolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: NJiri Slaby <xslaby@fi.muni.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

https://bugzilla.novell.com/show_bug.cgi?id=103746

Old 2.6.13 hotplug enviroment for 'plug in firewire disk' event:

==> debug.01139.ieee1394.add.8211 <==
set -- ieee1394
UDEV_LOG='7'
ACTION='add'
DEVPATH='/class/ieee1394/00010410100036e0-0'
SUBSYSTEM='ieee1394'
SEQNUM='1139'
PHYSDEVPATH='/devices/pci0001:10/0001:10:0d.0/0001:11:0a.0/fw-host0/00010410100036e0/00010410100036e0-0'
PHYSDEVBUS='ieee1394'
VENDOR_ID='000000'
MODEL_ID='001010'
GUID='00010410100036e0'
SPECIFIER_ID='00609e'
VERSION='010483'
UDEVD_EVENT='1'

Module spb2 is not loaded.

grep sbp2 /lib/modules/2.6.13-20050901172817-default/modules.alias
alias ieee1394:ven*mo*sp0000609Ever00010483* sbp2

printf 'ieee1394:ven%08Xmo%08Xsp%08Xver%08X\n' '0x000000' '0x001010' '0x00609e' '0x010483'
ieee1394:ven00000000mo00001010sp0000609Ever00010483

modprobe -v ieee1394:ven00000000mo00001010sp0000609Ever00010483
insmod /lib/modules/2.6.13-20050901172817-default/kernel/drivers/ieee1394/sbp2.ko

Providing a MODALIAS= enviroment variable with the content above will fix it.
Signed-off-by: NOlaf Hering <olh@suse.de>
Cc: Ben Collins <bcollins@debian.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NCoywolf Qi Hunt <qiyong@fc-cn.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

dentry cache uses sophisticated RCU technology (and prefetching if
available) but touches 2 cache lines per dentry during hlist lookup.

This patch moves d_hash in the same cache line than d_parent and d_name
fields so that :

1) One cache line is needed instead of two.

2) the hlist_for_each_rcu() prefetching has a chance to bring all the
   needed data in advance, not only the part that includes d_hash.next.

I also changed one old comment that was wrong for 64bits.

A further optimisation would be to separate dentry in two parts, one that
is mostly read, and one writen (d_count/d_lock) to avoid false sharing on
SMP/NUMA but this would need different field placement depending on 32bits
or 64bits platform.
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Revert the hack introduced last week.
Signed-off-by: NJohn Hawkes <hawkes@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

For a NUMA system with multiple CPUs per node, declaring a cpu-exclusive
cpuset that includes only some, but not all, of the CPUs in a node will mangle
the sched domain structures.
Signed-off-by: NJohn Hawkes <hawkes@sgi.com>
Cc; Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NJohn Hawkes <hawkes@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Now the real motivation for this cpuset mem_exclusive patch series seems
trivial.

This patch keeps a task in or under one mem_exclusive cpuset from provoking an
oom kill of a task under a non-overlapping mem_exclusive cpuset.  Since only
interrupt and GFP_ATOMIC allocations are allowed to escape mem_exclusive
containment, there is little to gain from oom killing a task under a
non-overlapping mem_exclusive cpuset, as almost all kernel and user memory
allocation must come from disjoint memory nodes.

This patch enables configuring a system so that a runaway job under one
mem_exclusive cpuset cannot cause the killing of a job in another such cpuset
that might be using very high compute and memory resources for a prolonged
time.
Signed-off-by: NPaul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch makes use of the previously underutilized cpuset flag
'mem_exclusive' to provide what amounts to another layer of memory placement
resolution.  With this patch, there are now the following four layers of
memory placement available:

 1) The whole system (interrupt and GFP_ATOMIC allocations can use this),
 2) The nearest enclosing mem_exclusive cpuset (GFP_KERNEL allocations can use),
 3) The current tasks cpuset (GFP_USER allocations constrained to here), and
 4) Specific node placement, using mbind and set_mempolicy.

These nest - each layer is a subset (same or within) of the previous.

Layer (2) above is new, with this patch.  The call used to check whether a
zone (its node, actually) is in a cpuset (in its mems_allowed, actually) is
extended to take a gfp_mask argument, and its logic is extended, in the case
that __GFP_HARDWALL is not set in the flag bits, to look up the cpuset
hierarchy for the nearest enclosing mem_exclusive cpuset, to determine if
placement is allowed.  The definition of GFP_USER, which used to be identical
to GFP_KERNEL, is changed to also set the __GFP_HARDWALL bit, in the previous
cpuset_gfp_hardwall_flag patch.

GFP_ATOMIC and GFP_KERNEL allocations will stay within the current tasks
cpuset, so long as any node therein is not too tight on memory, but will
escape to the larger layer, if need be.

The intended use is to allow something like a batch manager to handle several
jobs, each job in its own cpuset, but using common kernel memory for caches
and such.  Swapper and oom_kill activity is also constrained to Layer (2).  A
task in or below one mem_exclusive cpuset should not cause swapping on nodes
in another non-overlapping mem_exclusive cpuset, nor provoke oom_killing of a
task in another such cpuset.  Heavy use of kernel memory for i/o caching and
such by one job should not impact the memory available to jobs in other
non-overlapping mem_exclusive cpusets.

This patch enables providing hardwall, inescapable cpusets for memory
allocations of each job, while sharing kernel memory allocations between
several jobs, in an enclosing mem_exclusive cpuset.

Like Dinakar's patch earlier to enable administering sched domains using the
cpu_exclusive flag, this patch also provides a useful meaning to a cpuset flag
that had previously done nothing much useful other than restrict what cpuset
configurations were allowed.
Signed-off-by: NPaul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add another GFP flag: __GFP_HARDWALL.

A subsequent "cpuset_zone_allowed" patch will use this flag to mark GFP_USER
allocations, and distinguish them from GFP_KERNEL allocations.

Allocations (such as GFP_USER) marked GFP_HARDWALL are constrainted to the
current tasks cpuset.  Other allocations (such as GFP_KERNEL) can steal from
the possibly larger nearest mem_exclusive cpuset ancestor, if memory is tight
on every node in the current cpuset.

This patch collides with Mel Gorman's patch to reduce fragmentation in the
standard buddy allocator, which adds two GFP flags.  This was discussed on
linux-mm in July.  Most likely, one of his flags for user reclaimable memory
can be the same as my __GFP_HARDWALL flag, under some generic name meaning its
user address space memory.
Signed-off-by: NPaul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch series extends the use of the cpuset attribute 'mem_exclusive'
to support cpuset configurations that:
 1) allow GFP_KERNEL allocations to come from a potentially larger
    set of memory nodes than GFP_USER allocations, and
 2) can constrain the oom killer to tasks running in cpusets in
    a specified subtree of the cpuset hierarchy.

Here's an example usage scenario.  For a few hours or more, a large NUMA
system at a University is to be divided in two halves, with a bunch of student
jobs running in half the system under some form of batch manager, and with a
big research project running in the other half.  Each of the student jobs is
placed in a small cpuset, but should share the classic Unix time share
facilities, such as buffered pages of files in /bin and /usr/lib.  The big
research project wants no interference whatsoever from the student jobs, and
has highly tuned, unusual memory and i/o patterns that intend to make full use
of all the main memory on the nodes available to it.

In this example, we have two big sibling cpusets, one of which is further
divided into a more dynamic set of child cpusets.

We want kernel memory allocations constrained by the two big cpusets, and user
allocations constrained by the smaller child cpusets where present.  And we
require that the oom killer not operate across the two halves of this system,
or else the first time a student job runs amuck, the big research project will
likely be first inline to get shot.

Tweaking /proc/<pid>/oom_adj is not ideal -- if the big research project
really does run amuck allocating memory, it should be shot, not some other
task outside the research projects mem_exclusive cpuset.

I propose to extend the use of the 'mem_exclusive' flag of cpusets to manage
such scenarios.  Let memory allocations for user space (GFP_USER) be
constrained by a tasks current cpuset, but memory allocations for kernel space
(GFP_KERNEL) by constrained by the nearest mem_exclusive ancestor of the
current cpuset, even though kernel space allocations will still _prefer_ to
remain within the current tasks cpuset, if memory is easily available.

Let the oom killer be constrained to consider only tasks that are in
overlapping mem_exclusive cpusets (it won't help much to kill a task that
normally cannot allocate memory on any of the same nodes as the ones on which
the current task can allocate.)

The current constraints imposed on setting mem_exclusive are unchanged.  A
cpuset may only be mem_exclusive if its parent is also mem_exclusive, and a
mem_exclusive cpuset may not overlap any of its siblings memory nodes.

This patch was presented on linux-mm in early July 2005, though did not
generate much feedback at that time.  It has been built for a variety of
arch's using cross tools, and built, booted and tested for function on SN2
(ia64).

There are 4 patches in this set:
  1) Some minor cleanup, and some improvements to the code layout
     of one routine to make subsequent patches cleaner.
  2) Add another GFP flag - __GFP_HARDWALL.  It marks memory
     requests for USER space, which are tightly confined by the
     current tasks cpuset.
  3) Now memory requests (such as KERNEL) that not marked HARDWALL can
     if short on memory, look in the potentially larger pool of memory
     defined by the nearest mem_exclusive ancestor cpuset of the current
     tasks cpuset.
  4) Finally, modify the oom killer to skip any task whose mem_exclusive
     cpuset doesn't overlap ours.

Patch (1), the one time I looked on an SN2 (ia64) build, actually saved 32
bytes of kernel text space.  Patch (2) has no affect on the size of kernel
text space (it just adds a preprocessor flag).  Patches (3) and (4) added
about 600 bytes each of kernel text space, mostly in kernel/cpuset.c, which
matters only if CONFIG_CPUSET is enabled.

This patch:

This patch applies a few comment and code cleanups to mm/oom_kill.c prior to
applying a few small patches to improve cpuset management of memory placement.

The comment changed in oom_kill.c was seriously misleading.  The code layout
change in select_bad_process() makes room for adding another condition on
which a process can be spared the oom killer (see the subsequent
cpuset_nodes_overlap patch for this addition).

Also a couple typos and spellos that bugged me, while I was here.

This patch should have no material affect.
Signed-off-by: NPaul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I've already sent this to the maintainers, and this is now being sent to a
larger community audience.  I have fixed a problem with the ia64 version of
build_sched_domains(), but a similar fix still needs to be made to the
generic build_sched_domains() in kernel/sched.c.

The "dynamic sched domains" functionality has recently been merged into
2.6.13-rcN that sees the dynamic declaration of a cpu-exclusive (a.k.a.
"isolated") cpuset and rebuilds the CPU Scheduler sched domains and sched
groups to separate away the CPUs in this cpu-exclusive cpuset from the
remainder of the non-isolated CPUs.  This allows the non-isolated CPUs to
completely ignore the isolated CPUs when doing load-balancing.

Unfortunately, build_sched_domains() expects that a sched domain will
include all the CPUs of each node in the domain, i.e., that no node will
belong in both an isolated cpuset and a non-isolated cpuset.  Declaring a
cpuset that violates this presumption will produce flawed data structures
and will oops the kernel.

To trigger the problem (on a NUMA system with >1 CPUs per node):
   cd /dev/cpuset
   mkdir newcpuset
   cd newcpuset
   echo 0 >cpus
   echo 0 >mems
   echo 1 >cpu_exclusive

I have fixed this shortcoming for ia64 NUMA (with multiple CPUs per node).
A similar shortcoming exists in the generic build_sched_domains() (in
kernel/sched.c) for NUMA, and that needs to be fixed also.  The fix
involves dynamically allocating sched_group_nodes[] and
sched_group_allnodes[] for each invocation of build_sched_domains(), rather
than using global arrays for these structures.  Care must be taken to
remember kmalloc() addresses so that arch_destroy_sched_domains() can
properly kfree() the new dynamic structures.
Signed-off-by: NJohn Hawkes <hawkes@sgi.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I ran across a memory leak related to the cfq scheduler. The cfq
init function increments the refcnt of the associated request_queue.

This refcount gets decremented in cfq's exit function. Since blk_cleanup_queue
only calls the elevator exit function when its refcnt goes to zero, the
request_q never gets cleaned up. It didn't look like other io schedulers were
incrementing this refcnt, so I removed the refcnt increment and it fixed the
memory leak for me.

To reproduce the problem, simply use cfq and use the scsi_host scan sysfs
attribute to scan "- - -" repeatedly on a scsi host and watch the memory
vanish.
Signed-off-by: NBrian King <brking@us.ibm.com>
Acked-by: NJens Axboe <axboe@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The sunrpc stats are collected in unsigned integers, but they are printed
with '%d'.  That can result in negative numbers in /proc/net/rpc when the
highest bit of a counter is set.  The following patch changes '%d' to '%u'
where appropriate.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

People have run into a problem when they do this:

watch (file1, all_events);
watch (file2, some_events);

if file2 is a hard link to file1, some events will be missed because by
default we replace the mask.  The patch below adds a flag IN_MASK_ADD which
will cause inotify to add to the existing mask if present.
Signed-off-by: NJohn McCutchan <ttb@tentacle.dhs.org>
Signed-off-by: NRobert Love <rml@novell.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>