Devices that do not have a special driver are handled by the generic
driver. This patch does the same thing using device groups; Instead of
forcing a particular driver, the appropriate driver is picked up by
udev. As a consequence, one can now move a device from generic to
specific handling by a simple rebind. By adding a new device id to the
generic driver, the same thing can be done in reverse.
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Acked-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Most HID drivers do not need to know what bus driver is in use.
A generic group driver can drive any hid device, and the device
list should not need to be duplicated for each new bus.

This patch adds wildcard matching to the HID bus, simplifying device
list handling for group drivers.
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Acked-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

In order to allow the report descriptor to influence the hid device
properties, one needs to parse the descriptor early, without reference
to any driver. Scan the descriptor for group information during device
add, before the device has been broadcast to userland. The device
modalias will contain group information which can be used to
differentiate between modules. For starters, just handle the generic
group.
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Acked-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

HID devices are only partially presented to userland.  Hotplugged
devices emit events containing a modalias based on the basic bus,
vendor and product entities. However, in practise a hid device can
depend on details such as a single usb interface or a particular item
in a report descriptor.

This patch adds a device group to the hid device id, and broadcasts it
using uevent and the device modalias.  The module alias generation is
modified to match. As a consequence, a device with a non-zero group
will be processed by the corresponding group driver instead of by the
generic hid driver.
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Acked-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The low-level driver can read the report descriptor, but it cannot
determine driver-specific changes to it. The hid core can fixup
and parse the report descriptor during driver attach, but does
not have direct access to the descriptor when doing so.

To be able to handle attach/detach of hid drivers properly,
a semantic change to hid_parse_report() is needed. This function has
been used in two ways, both as descriptor reader in the ll drivers and
as a parsor in the probe of the drivers. This patch splits the usage
by introducing hid_open_report(), and modifies the hid_parse() macro
to call hid_open_report() instead. The only usage of hid_parse_report()
is then to read and store the device descriptor. As a consequence, we
can handle the report fixups automatically inside the hid core.
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Tested-by: NNikolai Kondrashov <spbnick@gmail.com>
Tested-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The current code allows several consecutive calls to hid_parse_report(),
which may have happened to work before, but would cause a memory leak
and generally be incorrect. This patch collects all the reports
before sending them once.

Cc: Nestor Lopez Casado <nlopezcasad@logitech.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Upcoming changes will split the semantics of hid_parse_report()
and hid_parse(), so make sure drivers use hid_parse() in probe().
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Acked-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Pull HID fixes from Jiri Kosina:
 "Fix for one particular device (bluetooth Tivo Slide) and change of
  'default y' -> 'default n' for CONFIG_HID_BATTERY_STRENGTH which I
  overlooked in the initial merge of the battery support"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: default HID_BATTERY_STRENGTH to no
  HID: tivo: fix support for bluetooth version of tivo Slide

Pull m68k arch fixes from Greg Ungerer:
 "This contains four fixes for 3.4.  Two fix and clean up compilation
  for the nommu 68x328 CPU targets.  The other two fix the platform
  definition and multi-function pin setup of the second eth interface
  on the ColdFire 5275 SoC."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: make sure 2nd FEC eth interface pins are enabled on 5275 ColdFire
  m68knommu: fix id number for second eth device on 5275 ColdFire
  m68knommu: move and fix the 68VZ328 platform bootlogo.h
  m68knommu: remove the unused bootlogo.h processing for 68EZ328 and 68VZ328

Pull nfsd bugfixes from J. Bruce Fields:
 "One bugfix, and one minor header fix from Jeff Layton while we're
  here"

* 'for-3.4' of git://linux-nfs.org/~bfields/linux:
  nfsd: include cld.h in the headers_install target
  nfsd: don't fail unchecked creates of non-special files

Pull drm fixes from Dave Airlie:
 "It's like a grab bag of one liners:

  - core: fix page flip error path, reorder object teardown.
  - usb: fix the drm_usb module license.
  - i915: VT switch on SNB with non-native modes fix, and a regression
    fix from 3.3.
  - radeon: missing unreserve on SI, AGP/VRAM setup fix (fixes radeon on
    IA64, but its a generic bug), an rn50 regression from 3.3, turn off
    MSIs on rv515 (it loses rearms every so often)."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  nouveau: Set special lane map for the right chipset
  drm/radeon: fix load detect on rn50 with hardcoded EDIDs.
  drm: Releasing FBs before releasing GEM objects during drm_release
  drm/nouveau/pm: don't read/write beyond end of stack buffer
  drivers: gpu: drm: gma500: mdfld_dsi_output.h: Remove not unneeded include of version.h
  radeon: fix r600/agp when vram is after AGP (v3)
  drm: fix page_flip error handling
  drm/radeon/kms: fix the regression of DVI connector check
  drm/usb: fix module license on drm/usb layer.
  drm/i915: Do not set "Enable Panel Fitter" on SNB pageflips
  drm/i915: Hold mode_config lock whilst changing mode for lastclose()
  drm/radeon/si: add missing radeon_bo_unreserve in si_rlc_init() v2
  drm/radeon: disable MSI on RV515
  drm/i915: don't clobber the special upscaling lvds timings

Pull KVM updates from Marcelo Tosatti.

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: lock slots_lock around device assignment
  KVM: VMX: Fix kvm_set_shared_msr() called in preemptible context
  KVM: unmap pages from the iommu when slots are removed
  KVM: PMU emulation: GLOBAL_CTRL MSR should be enabled on reset

The refactoring of the nv50 logic, introduced in 8663bc7c, modified the
test for the special lane map used on some Apple computers with Nvidia
chipsets. The tested MBA3,1 would still boot, but resume from suspend
stopped working. This patch restores the old test, which fixes the problem.
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Acked-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

When the force changes went in back in 3.3.0, we ended up returning
disconnected in the !force case, and the connected in when forced,
as it hit the hardcoded check.

Fix it so all exits go via the hardcoded check and stop spurious
modesets on platforms with hardcoded EDIDs.

Reported-by: Evan McNabb (Red Hat)
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

During DRM release, all the FBs and gem objects are released. If
a gem object is being used as a FB and set to a crtc, it must not
be freed before releasing the framebuffer first.

If FBs are released first, the crtc using the FB is disabled first
so now the GEM object can be freed safely. The CRTC will be enabled
again when the driver restores fbdev mode.
Signed-off-by: NPrathyush K <prathyush.k@samsung.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

NUL-terminate after strncpy.

If the parameter "profile" has length 16 or more, then strncpy
leaves "string" with no NUL terminator, so the following search
for '\n' may read beyond the end of that 16-byte buffer.
If it finds a newline there, then it will also write beyond the
end of that stack buffer.
Signed-off-by: NJim Meyering <meyering@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The output of "make versioncheck" points a incorrect include of
version.h in the drivers/gpu/drm/gma500/mdfld_dsi_output.h:

drivers/gpu/drm/gma500/mdfld_dsi_output.h: 32 linux/version.h not needed.

If we take a look in the file, we can agree to remove it.

Cc: David Airlie <airlied@linux.ie>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: NMarcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

If AGP is placed in the middle, the size_af is off-by-one, it results
in VRAM being placed at 0x7fffffff instead of 0x8000000.

v2: fix the vram_start setup.
v3: also fix r7xx & newer ASIC

Reported-by: russiane39 on #radeon
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Free event and restore event_space only when page_flip->flags has
DRM_MODE_PAGE_FLIP_EVENT if page_flip() is failed.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: Do not set "Enable Panel Fitter" on SNB pageflips
  drm/i915: Hold mode_config lock whilst changing mode for lastclose()
  drm/i915: don't clobber the special upscaling lvds timings

The check of the encoder type in the commit [e00e8b5e: drm/radeon/kms:
fix analog load detection on DVI-I connectors] is obviously wrong, and
it's the culprit of the regression on my workstation with DVI-analog
connection resulting in the blank output.

Fixed the typo now.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Commit 4f5ca836 "HID: hid-input: add support for HID devices reporting
Battery Strength" added the CONFIG_HID_BATTERY_STRENGTH option to report
the battery strength of HID devices.  The commit log explicitly mentions
it not working properly with recent userspace, but it is default y
anyway.  This is rather odd, and actually causes problems on real
systems.

This works around Fedora bug
https://bugzilla.redhat.com/show_bug.cgi?id=806295Signed-off-by: NJosh Boyer <jwboyer@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Allows this module to load correctly with certain debugging options on.

Reported on irc by scientes
Signed-off-by: NDave Airlie <airlied@redhat.com>

My 9ce70c02 "memcg: fix deadlock by inverting lrucare nesting" put a
nasty little bug into v3.3's version of mem_cgroup_replace_page_cache(),
sometimes used for FUSE.  Replacing __mem_cgroup_commit_charge_lrucare()
by __mem_cgroup_commit_charge(), I used the "pc" pointer set up earlier:
but it's for oldpage, and needs now to be for newpage.  Once oldpage was
freed, its PageCgroupUsed bit (cleared above but set again here) caused
"Bad page state" messages - and perhaps worse, being missed from newpage.
(I didn't find this by using FUSE, but in reusing the function for tmpfs.)
Signed-off-by: NHugh Dickins <hughd@google.com>
Cc: stable@vger.kernel.org [v3.3 only]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  security: fix compile error in commoncap.c

As pointed out by Jason Baron, when assigning a device to a guest
we first set the iommu domain pointer, which enables mapping
and unmapping of memory slots to the iommu.  This leaves a window
where this path is enabled, but we haven't synchronized the iommu
mappings to the existing memory slots.  Thus a slot being removed
at that point could send us down unexpected code paths removing
non-existent pinnings and iommu mappings.  Take the slots_lock
around creating the iommu domain and initial mappings as well as
around iommu teardown to avoid this race.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Add missing "personality.h"
security/commoncap.c: In function 'cap_bprm_set_creds':
security/commoncap.c:510: error: 'PER_CLEAR_ON_SETID' undeclared (first use in this function)
security/commoncap.c:510: error: (Each undeclared identifier is reported only once
security/commoncap.c:510: error: for each function it appears in.)
Signed-off-by: NJonghwan Choi <jhbird.choi@samsung.com>
Acked-by: NSerge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: NJames Morris <james.l.morris@oracle.com>

kvm_set_shared_msr() may not be called in preemptible context,
but vmx_set_msr() does so:

  BUG: using smp_processor_id() in preemptible [00000000] code: qemu-kvm/22713
  caller is kvm_set_shared_msr+0x32/0xa0 [kvm]
  Pid: 22713, comm: qemu-kvm Not tainted 3.4.0-rc3+ #39
  Call Trace:
   [<ffffffff8131fa82>] debug_smp_processor_id+0xe2/0x100
   [<ffffffffa0328ae2>] kvm_set_shared_msr+0x32/0xa0 [kvm]
   [<ffffffffa03a103b>] vmx_set_msr+0x28b/0x2d0 [kvm_intel]
   ...

Making kvm_set_shared_msr() work in preemptible is cleaner, but
it's used in the fast path.  Making two variants is overkill, so
this patch just disables preemption around the call.
Reported-by: NDave Jones <davej@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Pull fuse updates from Miklos Szeredi.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: use flexible array in fuse.h
  fuse: allow nanosecond granularity
  fuse: O_DIRECT support for files
  fuse: fix nlink after unlink

Pull s390 updates from Martin Schwidefsky:
 "A couple of bug fixes, one of them is a TLB flush fix.  Included as
  well is one small coding style patch and a patch to update the default
  configuration."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  [S390] Fix compile error in swab.h
  [S390] Fix stfle() lowcore protection problem
  [S390] cpum_cf: get rid of compile warnings
  [S390] irq: simple coding style change
  [S390] update default configuration
  [S390] fix tlb flushing for page table pages
  [S390] kernel: Use local_irq_save() for memcpy_real()
  [S390] s390/char/vmur.c: fix memory leak
  [S390] drivers/s390/block/dasd_eckd.c: add missing dasd_sfree_request

Pull security subsystem fixes from James Morris.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  fcaps: clear the same personality flags as suid when fcaps are used
  mpi: Avoid using freed pointer in mpi_lshift_limbs()
  Smack: move label list initialization

The BCJ filters were meant to be enabled already on these
archs, but the xz_wrap.sh script was buggy. Enabling the
filters should give smaller kernel images.

xz_wrap.sh will now use $SRCARCH instead of $ARCH to detect
the architecture. That way it doesn't need to care about the
subarchs (like i386 vs. x86_64) since the BCJ filters don't
care either.
Signed-off-by: NLasse Collin <lasse.collin@tukaani.org>
Acked-by: NJan Beulich <jbeulich@suse.com>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull libara fixes from Jeff Garzik:

 - Notable regression fix.  Forbid dynamic runtime power management by
   default, due to issues with suspend/resume and hotplug.

   To re-enable, use sysfs.

 - make ata_print_id atomic, due to ref from multiple contexts

 - sata_mv warning fix

 - ata_piix new PCI ID

* tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: forbid port runtime pm by default, fixing regression
  libata: make ata_print_id atomic
  sata_mv: silence an uninitialized variable warning
  ata_piix: IDE-mode SATA patch for Intel DH89xxCC DeviceIDs

Forbid port runtime pm by default because it has known hotplug issue.
User can allow it by, for example

echo auto > /sys/devices/pci0000:00/0000:00:1f.2/ata2/power/control
Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This reverts commit 6fe0d062.

Paul bisected this regression.

The conversion was done blindly and is wrong, as it does not provide a
primary handler to disable the level type irq on the device level.
Neither does it set the IRQF_ONESHOT flag which handles that at the irq
line level.  This can't be done as the interrupt might be shared, though
we might extend the core to force it.

So an interrupt on this line will wake up the thread, but immediately
unmask the irq after that.  Due to the interrupt being level type the
hardware interrupt is raised over and over and prevents the irq thread
from handling it.  Fail.

request_irq() unfortunately does not refuse such a request and the patch
was obviously never tested with real interrupts.
Bisected-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Not only do the pageflip work without it at non-native modes (i.e. with
the panel fitter enabled), it also causes normal (non-pageflipped)
modesets to fail.
Reported-by: NAdam Jackson <ajax@redhat.com>
Tested-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Wanted-by-for-fixes: Dave Airlie <airlied@gmail.com>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If a process increases permissions using fcaps all of the dangerous
personality flags which are cleared for suid apps should also be cleared.
Thus programs given priviledge with fcaps will continue to have address space
randomization enabled even if the parent tried to disable it to make it
easier to attack.
Signed-off-by: NEric Paris <eparis@redhat.com>
Reviewed-by: NSerge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: NJames Morris <james.l.morris@oracle.com>

At the start of the function we assign 'a->d' to 'ap'. Then we use the
RESIZE_IF_NEEDED macro on 'a' - this may free 'a->d' and replace it
with newly allocaetd storage. In that case, we'll be operating on
freed memory further down in the function when we index into 'ap[]'.
Since we don't actually need 'ap' until after the use of the
RESIZE_IF_NEEDED macro we can just delay the assignment to it until
after we've potentially resized, thus avoiding the issue.

While I was there anyway I also changed the integer variable 'n' to be
const. It might as well be since we only assign to it once and use it
as a constant, and then the compiler will tell us if we ever assign to
it in the future.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Acked-by: NDmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: NJames Morris <james.l.morris@oracle.com>

A kernel with Smack enabled will fail if tmpfs has xattr support.

Move the initialization of predefined Smack label
list entries to the LSM initialization from the
smackfs setup. This became an issue when tmpfs
acquired xattr support, but was never correct.
Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NJames Morris <james.l.morris@oracle.com>

Pull ext4 regression fixes from Ted Ts'o:
 "This fixes a scalability problem reported by Andi Kleen and Tim Chen;
  they were quite secretive about the precise nature of their workload,
  but they later admitted that it only showed up when they were using a
  large sparse file, so the amount of data I/O that was needed was close
  to zero.

  I'm not sure how realistic this is and it's only a regression if you
  consider changes made since 2.6.39 to be a "regression" vis-a-vis the
  policy regarding post-merge window bug fixes, but Linus agreed it was
  worth fixing, so I'm including it in this pull request.

  This also fixes the journalled quota mount options, which I
  accidentally broke while I was cleaning up the mount option handling."

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix handling of journalled quota options
  ext4: address scalability issue by removing extent cache statistics