Since commit "efcac658 powerpc: Per process DSCR + some fixes (try#4)"
it is no longer possible to set the DSCR on a per-CPU basis.

The old behaviour was to minipulate the DSCR SPR directly but this is no
longer sufficient: the value is quickly overwritten by context switching.

This patch stores the per-CPU DSCR value in a kernel variable rather than
directly in the SPR and it is used whenever a process has not set the DSCR
itself. The sysfs interface (/sys/devices/system/cpu/cpuN/dscr) is unchanged.

Writes to the old global default (/sys/devices/system/cpu/dscr_default)
now set all of the per-CPU values and reads return the last written value.

The new per-CPU default is added to the paca_struct and is used everywhere
outside of sysfs.c instead of the old global default.
Signed-off-by: NSam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

If we do a treclaim and we are not in TM suspend mode, it results in a TM bad
thing (ie. a 0x700 program check).  Similarly if we do a trechkpt and we have
an active transaction or TEXASR Failure Summary (FS) is not set, we also take a
TM bad thing.

This should never happen, but if it does (ie. a kernel bug), the cause is
almost impossible to debug as the GPR state is mostly userspace and hence we
don't get a call chain.

This adds some checks in these cases case a BUG_ON() (in asm) in case we ever
hit these cases.  It moves the register saving around to preserve r1 till later
also.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We save r1 to the scratch SPR and restore it from there after the trechkpt so
saving r1 to the paca is not needed.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The r2 TOC/GOT save offset is 40 on ABIv1 and 24 on ABIv2.
Signed-off-by: NAnton Blanchard <anton@samba.org>

Get rid of the tm specific STACK_PARAM and use STK_PARAM
Signed-off-by: NAnton Blanchard <anton@samba.org>

We can't take an IRQ when we're about to do a trechkpt as our GPR state is set
to user GPR values.

We've hit this when running some IBM Java stress tests in the lab resulting in
the following dump:

  cpu 0x3f: Vector: 700 (Program Check) at [c000000007eb3d40]
      pc: c000000000050074: restore_gprs+0xc0/0x148
      lr: 00000000b52a8184
      sp: ac57d360
     msr: 8000000100201030
    current = 0xc00000002c500000
    paca    = 0xc000000007dbfc00     softe: 0     irq_happened: 0x00
      pid   = 34535, comm = Pooled Thread #
  R00 = 00000000b52a8184   R16 = 00000000b3e48fda
  R01 = 00000000ac57d360   R17 = 00000000ade79bd8
  R02 = 00000000ac586930   R18 = 000000000fac9bcc
  R03 = 00000000ade60000   R19 = 00000000ac57f930
  R04 = 00000000f6624918   R20 = 00000000ade79be8
  R05 = 00000000f663f238   R21 = 00000000ac218a54
  R06 = 0000000000000002   R22 = 000000000f956280
  R07 = 0000000000000008   R23 = 000000000000007e
  R08 = 000000000000000a   R24 = 000000000000000c
  R09 = 00000000b6e69160   R25 = 00000000b424cf00
  R10 = 0000000000000181   R26 = 00000000f66256d4
  R11 = 000000000f365ec0   R27 = 00000000b6fdcdd0
  R12 = 00000000f66400f0   R28 = 0000000000000001
  R13 = 00000000ada71900   R29 = 00000000ade5a300
  R14 = 00000000ac2185a8   R30 = 00000000f663f238
  R15 = 0000000000000004   R31 = 00000000f6624918
  pc  = c000000000050074 restore_gprs+0xc0/0x148
  cfar= c00000000004fe28 dont_restore_vec+0x1c/0x1a4
  lr  = 00000000b52a8184
  msr = 8000000100201030   cr  = 24804888
  ctr = 0000000000000000   xer = 0000000000000000   trap =  700

This moves tm_recheckpoint to a C function and moves the tm_restore_sprs into
that function.  It then adds IRQ disabling over the trechkpt critical section.
It also sets the TEXASR FS in the signals code to ensure this is never set now
that we explictly write the TM sprs in tm_recheckpoint.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
cc: stable@vger.kernel.org
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The condition register (CR) is a 32 bit quantity so we should use
32 bit loads and stores.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This creates new 'thread_fp_state' and 'thread_vr_state' structures
to store FP/VSX state (including FPSCR) and Altivec/VSX state
(including VSCR), and uses them in the thread_struct.  In the
thread_fp_state, the FPRs and VSRs are represented as u64 rather
than double, since we rarely perform floating-point computations
on the values, and this will enable the structures to be used
in KVM code as well.  Similarly FPSCR is now a u64 rather than
a structure of two 32-bit values.

This takes the offsets out of the macros such as SAVE_32FPRS,
REST_32FPRS, etc.  This enables the same macros to be used for normal
and transactional state, enabling us to delete the transactional
versions of the macros.   This also removes the unused do_load_up_fpu
and do_load_up_altivec, which were in fact buggy since they didn't
create large enough stack frames to account for the fact that
load_up_fpu and load_up_altivec are not designed to be called from C
and assume that their caller's stack frame is an interrupt frame.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

When we do a treclaim or trecheckpoint we end up running with userspace
PPR and DSCR values.  Currently we don't do anything special to avoid
running with user values which could cause a severe performance
degradation.

This patch moves the PPR and DSCR save and restore around treclaim and
trecheckpoint so that we run with user values for a much shorter period.
More care is taken with the PPR as it's impact is greater than the DSCR.

This is similar to user exceptions, where we run HTM_MEDIUM early to
ensure that we don't run with a userspace PPR values in the kernel.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Cc: <stable@vger.kernel.org> # 3.9+
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We can't take IRQs in tm_reclaim as we might have a bogus r13 and r1.

This turns IRQs hard off in this function.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Cc: <stable@vger.kernel.org> # 3.9+
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Since 2002, the kernel has not saved VRSAVE on exception entry and
restored it on exit; rather, VRSAVE gets context-switched in _switch.
This means that when executing in process context in the kernel, the
userspace VRSAVE value is live in the VRSAVE register.

However, the signal code assumes that current->thread.vrsave holds
the current VRSAVE value, which is incorrect.  Therefore, this
commit changes it to use the actual VRSAVE register instead.  (It
still uses current->thread.vrsave as a temporary location to store
it in, as __get_user and __put_user can only transfer to/from a
variable, not an SPR.)

This also modifies the transactional memory code to save and restore
VRSAVE regardless of whether VMX is enabled in the MSR.  This is
because accesses to VRSAVE are not controlled by the MSR.VEC bit,
but can happen at any time.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

If a transaction is rolled back, the Target Address Register (TAR), Processor
Priority Register (PPR) and Data Stream Control Register (DSCR) should be
restored to the checkpointed values before the transaction began.  Any changes
to these SPRs inside the transaction should not be visible in the abort
handler.

Currently Linux doesn't save or restore the checkpointed TAR, PPR or DSCR.  If
we preempt a processes inside a transaction which has modified any of these, on
process restore, that same transaction may be aborted we but we won't see the
checkpointed versions of these SPRs.

This adds checkpointed versions of these SPRs to the thread_struct and adds the
save/restore of these three SPRs to the treclaim/trechkpt code.

Without this if any of these SPRs are modified during a transaction, users may
incorrectly see a speculated SPR value even if the transaction is aborted.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Cc: <stable@vger.kernel.org> [v3.10]
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

When we treclaim and trecheckpoint there's an unavoidable period when r1
will not be a valid kernel stack pointer.

This patch clears the MSR recoverable interrupt (RI) bit over these
regions to indicate we have an invalid kernel stack pointer.

For treclaim, the region over which we clear MSR RI is larger than
required to avoid the need for an extra costly mtmsrd.

Thanks to Paulus for suggesting this change.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We can't compile a kernel with CONFIG_ALTIVEC=n when
CONFIG_PPC_TRANSACTIONAL_MEM=y.  We currently get:

arch/powerpc/kernel/tm.S:320: Error: unsupported relocation against THREAD_VSCR
arch/powerpc/kernel/tm.S:323: Error: unsupported relocation against THREAD_VR0
arch/powerpc/kernel/tm.S:323: Error: unsupported relocation against THREAD_VR0
etc.

The below fixes this with a sprinkling of #ifdefs.

This was found by mpe with kisskb:
  http://kisskb.ellerman.id.au/kisskb/buildresult/8539442/Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>

Here we add the helper functions to be used when context switching.  These
allow us to fully reclaim and recheckpoint a transaction.

We introduce a new paca field called tm_scratch to help us store away register
values when doing the low level tm reclaim register save.
Signed-off-by: NMatt Evans <matt@ozlabs.org>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>