Add support to group the output of perf list by the Topic field in the
JSON file.

Example output:

% perf list
...
Cache:
  l1d.replacement
       [L1D data line replacements]
  l1d_pend_miss.pending
       [L1D miss oustandings duration in cycles]
  l1d_pend_miss.pending_cycles
       [Cycles with L1D load Misses outstanding]
  l2_l1d_wb_rqsts.all
       [Not rejected writebacks from L1D to L2 cache lines in any state]
  l2_l1d_wb_rqsts.hit_e
       [Not rejected writebacks from L1D to L2 cache lines in E state]
  l2_l1d_wb_rqsts.hit_m
       [Not rejected writebacks from L1D to L2 cache lines in M state]

...
Pipeline:
  arith.fpu_div
       [Divide operations executed]
  arith.fpu_div_active
       [Cycles when divider is busy executing divide operations]
  baclears.any
       [Counts the total number when the front end is resteered, mainly
       when the BPU cannot provide a correct prediction and this is
       corrected by other branch handling mechanisms at the front end]
  br_inst_exec.all_branches
       [Speculative and retired branches]
  br_inst_exec.all_conditional
       [Speculative and retired macro-conditional branches]
  br_inst_exec.all_direct_jmp
       [Speculative and retired macro-unconditional branches excluding
       calls and indirects]
  br_inst_exec.all_direct_near_call
       [Speculative and retired direct near calls]
  br_inst_exec.all_indirect_jump_non_call_ret
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-14-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Previously we were dropping the useful longer descriptions that some
events have in the event list completely. This patch makes them appear with
perf list.

Old perf list:

baclears:
  baclears.all
       [Counts the number of baclears]

vs new:

perf list -v:
...
baclears:
  baclears.all
       [The BACLEARS event counts the number of times the front end is
        resteered, mainly when the Branch Prediction Unit cannot provide
        a correct prediction and this is corrected by the Branch Address
        Calculator at the front end. The BACLEARS.ANY event counts the
        number of baclears for any type of branch]
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-13-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add a PERF_CPUID variable to override the CPUID of the current CPU
(within the current architecture). This is useful for testing, so that
all event lists can be tested on a single system.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-10-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add a --no-desc flag to 'perf list' to not print the event descriptions
that were earlier added for JSON events. This may be useful to get a
less crowded listing.

It's still default to print descriptions as that is the more useful
default for most users.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1473978296-20712-9-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Automatically adapt the now wider and word wrapped perf list output to
wider terminals. This requires querying the terminal before the auto
pager takes over, and exporting this information from the pager
subsystem.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-8-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add support to print alias descriptions in perf list, which are taken
from the generated event files.

The sorting code is changed to put the events with descriptions at the
end. The descriptions are printed as possibly multiple word wrapped
lines.

Example output:

% perf list
...
  arith.fpu_div
       [Divide operations executed]
  arith.fpu_div_active
       [Cycles when divider is busy executing divide operations]

Committer notes:

Further testing on a Broadwell machine (ThinkPad t450s), using these
files:

  $ find tools/perf/pmu-events/arch/x86/
  tools/perf/pmu-events/arch/x86/
  tools/perf/pmu-events/arch/x86/Broadwell
  tools/perf/pmu-events/arch/x86/Broadwell/Cache.json
  tools/perf/pmu-events/arch/x86/Broadwell/Other.json
  tools/perf/pmu-events/arch/x86/Broadwell/Frontend.json
  tools/perf/pmu-events/arch/x86/Broadwell/Virtual-Memory.json
  tools/perf/pmu-events/arch/x86/Broadwell/Pipeline.json
  tools/perf/pmu-events/arch/x86/Broadwell/Floating-point.json
  tools/perf/pmu-events/arch/x86/Broadwell/Memory.json
  tools/perf/pmu-events/arch/x86/mapfile.csv
  $

Taken from:

https://github.com/sukadev/linux/tree/json-code+data-v21/tools/perf/pmu-events/arch/x86/

to get this machinery to actually parse JSON files, generate
$(OUTPUT)pmu-events/pmu-events.c, compile it and link it with perf, that
will then use the table it contains, these files will be submitted right
after this patchkit.

  [acme@jouet linux]$ perf list page_walker

  List of pre-defined events (to be used in -e):

    page_walker_loads.dtlb_l1
         [Number of DTLB page walker hits in the L1+FB]
    page_walker_loads.dtlb_l2
         [Number of DTLB page walker hits in the L2]
    page_walker_loads.dtlb_l3
         [Number of DTLB page walker hits in the L3 + XSNP]
    page_walker_loads.dtlb_memory
         [Number of DTLB page walker hits in Memory]
    page_walker_loads.itlb_l1
         [Number of ITLB page walker hits in the L1+FB]
    page_walker_loads.itlb_l2
         [Number of ITLB page walker hits in the L2]
    page_walker_loads.itlb_l3
         [Number of ITLB page walker hits in the L3 + XSNP]

[acme@jouet linux]$
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-7-git-send-email-sukadev@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

At run time (when 'perf' is starting up), locate the specific table of
PMU events that corresponds to the current CPU. Using that table, create
aliases for the each of the PMU events in the CPU. The use these aliases
to parse the user specified perf event.

In short this would allow the user to specify events using their aliases
rather than raw event codes.

Based on input and some earlier patches from Andi Kleen, Jiri Olsa.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Acked-by: NJiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1473978296-20712-4-git-send-email-sukadev@linux.vnet.ibm.com
[ Make pmu_add_cpu_aliases() return void, since it was returning just '0' and
  furthermore, even that was being discarded via an explicit (void) cast ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Experimenting a bit using cppcheck[1], a static checker brought to my
attention by Colin, reducing the scope of some variables, reducing the
line of source code lines in the process:

  $ cppcheck --enable=style tools/perf/util/thread.c
  Checking tools/perf/util/thread.c...
  [tools/perf/util/thread.c:17]: (style) The scope of the variable 'leader' can be reduced.
  [tools/perf/util/thread.c:133]: (style) The scope of the variable 'err' can be reduced.
  [tools/perf/util/thread.c:273]: (style) The scope of the variable 'err' can be reduced.

Will continue later, but these are already useful, keep them.

1: https://sourceforge.net/p/cppcheck/wiki/Home/

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ixws7lbycihhpmq9cc949ti6@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Static anaylsis with cppcheck[1] detected an incorrect comparison:
[tools/perf/util/probe-event.c:216]: (warning) Char literal compared
with pointer 'ptr2'. Did you intend to dereference it?

Dereference ptr2 for the comparison to fix this.

1: https://sourceforge.net/p/cppcheck/wiki/Home/Signed-off-by: NColin King <colin.king@canonical.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 35726d3a ("perf probe: Fix to cut off incompatible chars from group name")
Link: http://lkml.kernel.org/r/20161003103431.18534-1-colin.king@canonical.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Match linkage name with mangled name if exists. The linkage_name is used
for storing mangled name of the object.

Thus, this allows 'perf probe' to find appropriate probe point from
mangled symbol as below.

E.g. without this fix:
  ----
  $ perf probe -x /usr/lib64/libstdc++.so.6 \
    -D _ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv
  Probe point '_ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv'
  not found.
    Error: Failed to add events.
  ----

With this fix, perf probe can find the correct one.
  ----
  $ perf probe -x /usr/lib64/libstdc++.so.6 \
    -D _ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv
  p:probe_libstdc/_ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv
  /usr/lib64/libstdc++.so.6.0.22:0x8ca60
  ----

Committer notes:

After the fix, setting it for real (no -D/--definition, that amounts to
a --dry-run):

  # perf probe -x /usr/lib64/libstdc++.so.6 _ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv
  Added new event:
    probe_libstdc:_ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv (on _ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv in /usr/lib64/libstdc++.so.6.0.22)

  You can now use it in all perf tools, such as:

	perf record -e probe_libstdc:_ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv -aR sleep 1

  # perf probe -l probe_libstdc:*
    probe_libstdc:_ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv (on is_open@libstdc++-v3/include/fstream in /usr/lib64/libstdc++.so.6.0.22)
  #
Reported-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/147464493162.29804.16715053505069382443.stgit@devboxSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Cut off the characters which can not use for group name of uprobes
when making it based on executable filename.

For example, if the exec name is libstdc++.so, without this fix
perf probe generates "probe_libstdc++" as the group name, but
it is failed to set because '+' can not be used for group name.

With this fix perf accepts only alphabet, number or '_' for group
name, thus perf generates "probe_libstdc" as the group name.

E.g. with this fix, you can see the event name has no "+".
  ----
  $ ./perf probe -x /usr/lib64/libstdc++.so.6 -D is_open
  p:probe_libstdc/is_open /usr/lib64/libstdc++.so.6.0.22:0x8ca80
  p:probe_libstdc/is_open_1 /usr/lib64/libstdc++.so.6.0.22:0x8ca70
  p:probe_libstdc/is_open_2 /usr/lib64/libstdc++.so.6.0.22:0x8ca60
  p:probe_libstdc/is_open_3 /usr/lib64/libstdc++.so.6.0.22:0xb0ad0
  p:probe_libstdc/is_open_4 /usr/lib64/libstdc++.so.6.0.22:0xecca9
  ----

Committer note:

Before this fix:

  # perf probe -x /usr/lib64/libstdc++.so.6 is_open
  Failed to write event: Invalid argument
    Error: Failed to add events.
  #

After the fix:

  # perf probe -x /usr/lib64/libstdc++.so.6 is_open
  Added new events:
    probe_libstdc:is_open (on is_open in /usr/lib64/libstdc++.so.6.0.22)
    probe_libstdc:is_open_1 (on is_open in /usr/lib64/libstdc++.so.6.0.22)
    probe_libstdc:is_open_2 (on is_open in /usr/lib64/libstdc++.so.6.0.22)
    probe_libstdc:is_open_3 (on is_open in /usr/lib64/libstdc++.so.6.0.22)
    probe_libstdc:is_open_4 (on is_open in /usr/lib64/libstdc++.so.6.0.22)

  You can now use it in all perf tools, such as:

	  perf record -e probe_libstdc:is_open_4 -aR sleep 1

  # perf probe -l probe_libstdc:*
    probe_libstdc:is_open (on is_open@libstdc++-v3/include/fstream in /usr/lib64/libstdc++.so.6.0.22)
    probe_libstdc:is_open_1 (on is_open@libstdc++-v3/include/fstream in /usr/lib64/libstdc++.so.6.0.22)
    probe_libstdc:is_open_2 (on is_open@libstdc++-v3/include/fstream in /usr/lib64/libstdc++.so.6.0.22)
    probe_libstdc:is_open_3 (on is_open@src/c++98/basic_file.cc in /usr/lib64/libstdc++.so.6.0.22)
    probe_libstdc:is_open_4 (on stdio_filebuf:5@include/ext/stdio_filebuf.h in /usr/lib64/libstdc++.so.6.0.22)
  #
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/147464491667.29804.9553638175441827970.stgit@devboxSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Skip probes if the entry address of the target function is 0.  This can
happen when we're handling C++ debuginfo files.

E.g. without this fix, below case still fail.
  ----
  $ ./perf probe -x /usr/lib64/libstdc++.so.6 -vD is_open
  probe-definition(0): is_open
  symbol:is_open file:(null) line:0 offset:0 return:0 lazy:(null)
  0 arguments
  symbol:catch file:(null) line:0 offset:0 return:0 lazy:(null)
  symbol:throw file:(null) line:0 offset:0 return:0 lazy:(null)
  symbol:rethrow file:(null) line:0 offset:0 return:0 lazy:(null)
  Open Debuginfo file: /usr/lib/debug/usr/lib64/libstdc++.so.6.0.22.debug
  Try to find probe point from debuginfo.
  Matched function: is_open [295df]
  found inline addr: 0x8ca80
  Probe point found: is_open+0
  found inline addr: 0x8ca70
  Probe point found: is_open+0
  found inline addr: 0x8ca60
  Probe point found: is_open+0
  Matched function: is_open [6527f]
  Matched function: is_open [9fe8a]
  Probe point found: is_open+0
  Matched function: is_open [19710b]
  found inline addr: 0xecca9
  Probe point found: stdio_filebuf+57
  found inline addr: 0x0
  Probe point found: swap+0
  Matched function: is_open [19fc9d]
  Probe point found: is_open+0
  Found 7 probe_trace_events.
  p:probe_libstdc++/is_open /usr/lib64/libstdc++.so.6.0.22:0x8ca80
  p:probe_libstdc++/is_open_1 /usr/lib64/libstdc++.so.6.0.22:0x8ca70
  p:probe_libstdc++/is_open_2 /usr/lib64/libstdc++.so.6.0.22:0x8ca60
  p:probe_libstdc++/is_open_3 /usr/lib64/libstdc++.so.6.0.22:0xb0ad0
  p:probe_libstdc++/is_open_4 /usr/lib64/libstdc++.so.6.0.22:0xecca9
  Failed to synthesize probe trace event.
    Error: Failed to add events. Reason: Invalid argument (Code: -22)
  ----
This is because some instances have entry_pc == 0 (see 19710b and
19fc9d). With this fix, those are skipped.

  ----
  $ ./perf probe -x /usr/lib64/libstdc++.so.6 -D is_open
  p:probe_libstdc++/is_open /usr/lib64/libstdc++.so.6.0.22:0x8ca80
  p:probe_libstdc++/is_open_1 /usr/lib64/libstdc++.so.6.0.22:0x8ca70
  p:probe_libstdc++/is_open_2 /usr/lib64/libstdc++.so.6.0.22:0x8ca60
  p:probe_libstdc++/is_open_3 /usr/lib64/libstdc++.so.6.0.22:0xb0ad0
  p:probe_libstdc++/is_open_4 /usr/lib64/libstdc++.so.6.0.22:0xecca9
  ----
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/147464490707.29804.14277897643725143867.stgit@devboxSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Ignore the error when the perf probe failed to find inline function
instances. This can happen when we search a method in C++ debuginfo.  If
there is completely no instance in target, perf probe can return an
error.

E.g. without this fix:
  ----
  $ perf probe -x /usr/lib64/libstdc++.so.6 -vD showmanyc
  probe-definition(0): showmanyc
  symbol:showmanyc file:(null) line:0 offset:0 return:0 lazy:(null)
  0 arguments
  symbol:catch file:(null) line:0 offset:0 return:0 lazy:(null)
  symbol:throw file:(null) line:0 offset:0 return:0 lazy:(null)
  symbol:rethrow file:(null) line:0 offset:0 return:0 lazy:(null)
  Open Debuginfo file: /usr/lib/debug/usr/lib64/libstdc++.so.6.0.22.debug
  Try to find probe point from debuginfo.
  Matched function: showmanyc
  An error occurred in debuginfo analysis (-2).
  Trying to use symbols.
  Failed to find symbol showmanyc in /usr/lib64/libstdc++.so.6.0.22
    Error: Failed to add events. Reason: No such file or directory (Code: -2)
  ----

This is because one of showmanyc is defined as inline but no instance
found. With this fix, it is succeeded to show as below.
  ----
  $ perf probe -x /usr/lib64/libstdc++.so.6 -D showmanyc
  p:probe_libstdc++/showmanyc /usr/lib64/libstdc++.so.6.0.22:0xb0e50
  p:probe_libstdc++/showmanyc_1 /usr/lib64/libstdc++.so.6.0.22:0xc7c40
  p:probe_libstdc++/showmanyc_2 /usr/lib64/libstdc++.so.6.0.22:0xecfa0
  p:probe_libstdc++/showmanyc_3 /usr/lib64/libstdc++.so.6.0.22:0x115fc0
  p:probe_libstdc++/showmanyc_4 /usr/lib64/libstdc++.so.6.0.22:0x121a90
  ----
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: NJiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/147464489775.29804.3190419491209875936.stgit@devboxSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Due to errata SKL014 "Intel PT TIP.PGD May Not Have Target IP Payload",
the Intel PT decoder needs to match address filters against TIP.PGD
packets.  Parse the address filters and implement the decoder's
'pgd_ip()' callback to match the IP against the filter regions.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-17-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When address filters are used, the decoder must detect the end of a
filter region (or a branch into a tracestop region) by matching Packet
Generation Disabled (TIP.PGD) packets against the object code using the
IP given in the packet. However, due to errata SKL014 "Intel PT TIP.PGD
May Not Have Target IP Payload", that IP may not be present.

Enable the decoder to handle that by adding a new callback function
'pgd_ip()' which indicates whether the IP is not traced, in which case
that is the point where the trace was disabled.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-16-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Read the address filter from the AUXTRACE_INFO event in preparation for
using it to assist in decoding.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-15-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The address filter is needed to help decode the trace, so store it in
the AUXTRACE_INFO event.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-14-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add a helper function 'intel_pt_has()' to make it easier to determine
which members the AUXTRACE_INFO event contains.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-13-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fix 2 places where the err variable was not being set.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-12-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Previously the maximum non-turbo ratio was calculated from TSC assuming
a 100 MHz multiplier which is correct for current hardware supporting
Intel PT.  However more recent kernels also now export the value, so use
that in preference to the calculated value.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-11-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Fix occasional decoder errors decoding trace data collected in snapshot
mode.

Snapshot mode can take successive snapshots of trace which might overlap.
The decoder checks whether there is an overlap but only looks at the
current and previous buffer. However buffers that do not contain
synchronization (i.e. PSB) packets cannot be decoded or used for overlap
checking. That means the decoder actually needs to check overlaps between
the current buffer and the previous buffer that contained usable data.
Make that change.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: stable@vger.kernel.org # v4.3+
Link: http://lkml.kernel.org/r/1474641528-18776-10-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Two SDT debug messages can occur for every DSO which is too noisy.
Consequently, increase debug level of SDT messages.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Acked-by: NMasami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-9-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Symbols come from either the DSO or /proc/kallsyms for the kernel.
Details of the functionality can be found in Documentation/perf-record.txt.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-8-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add a function to find the last symbol in a DSO. This will be used when
parsing address filters to calculate a region that includes the entire
DSO.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-7-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Commit 608c34de ("perf symbols: Mark if a symbol is idle in the
library") causes idle symbols to vanish from perf script output. That is
because print functions suppress symbols marked as 'idle'.

However, suppression of 'idle' functions is only used by 'perf top' and
'perf top' does not use the print functions.  Consequently that
functionality can simply be removed from the print functions.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Fixes: 608c34de ("perf symbols: Mark if a symbol is idle in the library")
Link: http://lkml.kernel.org/r/1474641528-18776-4-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch makes it possible to use the current filter framework with
address filters.  That way address filters for HW tracers such as
CoreSight and Intel PT can be communicated to the kernel drivers.
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1474037045-31730-4-git-send-email-mathieu.poirier@linaro.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Making function perf_evsel__append_filter() static and introducing a new
tracepoint specific function to append filters.  That way we eliminate
redundant code and avoid formatting mistake.
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1474037045-31730-3-git-send-email-mathieu.poirier@linaro.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

By making function perf_evsel__append_filter() take a format rather than
an operator it is possible to reuse the code for other purposes (ex.
Intel PT and CoreSight) than tracepoints.
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1474037045-31730-2-git-send-email-mathieu.poirier@linaro.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

On ARM32 building it report following error when we build with
libbabeltrace:

  util/data-convert-bt.c: In function 'add_bpf_output_values':
  util/data-convert-bt.c:440:3: error: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'unsigned int' [-Werror=format]
  cc1: all warnings being treated as errors

Fix it by changing %lu to %zu.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Fixes: 6122d57e ("perf data: Support converting data from bpf_perf_event_output()")
Link: http://lkml.kernel.org/r/1475035126-146587-1-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Patch "perf record: Mark MAP_HUGETLB when synthesizing mmap events") breaks
MMAP event synthesis.  The executable name comparison will match any name
if the length is zero, resulting in all the user space maps becoming
anonymous.  This is particularly noticeable with system-wide traces.
Example:

	perf record -a sleep 1
	perf script --show-mmap-events

Committer note:

That is not the case when, say, one has a qemu instance and libvirt actually
mounts hugetlbfs. To test this I had to first umount it:

[root@jouet ~]# mount | grep hugetlbfs
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,seclabel)
[root@jouet ~]#

After unmount it the error fixed by this patch manifests itself:

  # perf record -a sleep 1
  # perf script --show-mmap-events | grep PERF_RECORD_MMAP2 | head -5
    systemd 0 [000] 0.000000: PERF_RECORD_MMAP2 1/1: [0x557d47ed8000(0x167000) @ 0 fd:00 3146896 7362875424355726126]: r-xp //anon
    systemd 0 [000] 0.000000: PERF_RECORD_MMAP2 1/1: [0x7f96c488d000(0x4000) @ 0 fd:00 3153214 7362875424355726126]: r-xp //anon
    systemd 0 [000] 0.000000: PERF_RECORD_MMAP2 1/1: [0x7f96c4a92000(0x3d000) @ 0 fd:00 3159276 7362875424355726126]: r-xp //anon
    systemd 0 [000] 0.000000: PERF_RECORD_MMAP2 1/1: [0x7f96c4cd5000(0x15000) @ 0 fd:00 3153725 7362875424355726126]: r-xp //anon
    systemd 0 [000] 0.000000: PERF_RECORD_MMAP2 1/1: [0x7f96c4eeb000(0x25000) @ 0 fd:00 3153260 7362875424355726126]: r-xp //anon
  #

Fixed version:

  # perf record -a sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 1.419 MB perf.data (182 samples) ]
  # perf script --show-mmap-events | grep PERF_RECORD_MMAP2 | head -5
    systemd 0 [000] 0.000000: PERF_RECORD_MMAP2 1/1: [0x557d47ed8000(0x167000) @ 0 fd:00 3146896 7362875424355726126]: r-xp /usr/lib/systemd/systemd
    systemd 0 [000] 0.000000: PERF_RECORD_MMAP2 1/1: [0x7f96c488d000(0x4000) @ 0 fd:00 3153214 7362875424355726126]: r-xp /usr/lib64/libuuid.so.1.3.0
    systemd 0 [000] 0.000000: PERF_RECORD_MMAP2 1/1: [0x7f96c4a92000(0x3d000) @ 0 fd:00 3159276 7362875424355726126]: r-xp /usr/lib64/libblkid.so.1.1.0
    systemd 0 [000] 0.000000: PERF_RECORD_MMAP2 1/1: [0x7f96c4cd5000(0x15000) @ 0 fd:00 3153725 7362875424355726126]: r-xp /usr/lib64/libz.so.1.2.8
    systemd 0 [000] 0.000000: PERF_RECORD_MMAP2 1/1: [0x7f96c4eeb000(0x25000) @ 0 fd:00 3153260 7362875424355726126]: r-xp /usr/lib64/liblzma.so.5.2.2
[root@jouet ~]#
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/1474641528-18776-3-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Will be used from external places in the upcoming c2c patch series.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1474558645-19956-10-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Will be used from external places in the upcoming c2c patch series.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1474558645-19956-9-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Will be used from external places in the upcoming c2c patch series.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1474558645-19956-8-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Will be used from external places in the upcoming c2c patch series.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1474558645-19956-7-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Will be used from external places in the upcoming c2c patch series.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1474558645-19956-6-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Will be used from external places in the upcoming c2c patch series.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1474558645-19956-5-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This patch adds a PMU callback and the required mechanic so that drivers
can process the command line configuration elements found in
evsel::config_terms.
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1474041004-13956-6-git-send-email-mathieu.poirier@linaro.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Coresight ETMs are IP blocks used to perform HW assisted tracing on a
CPU core.  This patch introduce the required auxiliary API functions
allowing the perf core to interact with a tracer.
Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1474041004-13956-4-git-send-email-mathieu.poirier@linaro.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Removing superfluous initialization of weight, it's already set to 0 via
memset.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1474290610-23241-3-git-send-email-jolsa@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The dso__read_binary_type_filename gets the dso's file name to open. We
need to check it for regular file before trying to open it, otherwise we
might get stuck with device file.
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20160920161245.GA8995@kravaSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>