In the punch_hole(), if offset bigger than inode size, it returns SUCCESS.
Then f2fs_fallocate() will update time and dirty mark.
In that case, inode has not been modified actually.
So I have added offset check routine that prevent to call the punch_hole().
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

that's the bulk of filesystem drivers dealing with inodes of their own
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

All places outside of core VFS that checked ->read and ->write for being NULL or
called the methods directly are gone now, so NULL {read,write} with non-NULL
{read,write}_iter will do the right thing in all cases.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Split __set_data_blkaddr from f2fs_update_extent_cache for readability.

Additionally rename __set_data_blkaddr to set_data_blkaddr for exporting.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch is to avoid some punch_hole overhead when releasing volatile data.
If volatile data was not written yet, we just can make the first page as zero.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Previously if inode is with inline data, we will try to invalid partial inline
data in page #0 when we truncate size of inode in truncate_partial_data_page().
And then we set page #0 to dirty, after this we can synchronize inode page with
page #0 at ->writepage().

But sometimes we will fail to operate page #0 in truncate_partial_data_page()
due to below reason:
a) if offset is zero, we will skip setting page #0 to dirty.
b) if page #0 is not uptodate, we will fail to update it as it has no mapping
data.

So with following operations, we will meet recent data which should be
truncated.

1.write inline data to file
2.sync first data page to inode page
3.truncate file size to 0
4.truncate file size to max_inline_size
5.echo 1 > /proc/sys/vm/drop_caches
6.read file --> meet original inline data which is remained in inode page.

This patch renames truncate_inline_data() to truncate_inline_inode() for code
readability, then use truncate_inline_inode() to truncate inline data in inode
page in truncate_blocks() and truncate page #0 in truncate_partial_data_page()
for fixing.

v2:
 o truncate partially #0 page in truncate_partial_data_page to avoid keeping
   old data in #0 page.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

When fsync is done through checkpoint, previous f2fs missed to clear append
and update flag. This patch fixes to clear them.

This was originally catched by Changman Lee before.
Signed-off-by: NChangman Lee <cm224.lee@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch introduces a generic ioctl for fs shutdown, which was used by xfs.

If this shutdown is triggered, filesystem stops any further IOs according to the
following options.

1. FS_GOING_DOWN_FULLSYNC
 : this will flush all the data and dentry blocks, and do checkpoint before
   shutdown.

2. FS_GOING_DOWN_METASYNC
 : this will do checkpoint before shutdown.

3. FS_GOING_DOWN_NOSYNC
 : this will trigger shutdown as is.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

In this patch, we do these jobs:
1. rename {check,update}_extent_cache to {lookup,update}_extent_info;
2. introduce universal lookup/update interface of extent cache:
f2fs_{lookup,update}_extent_cache including above two real functions, then
export them to function callers.

So after above cleanup, we can add new rb-tree based extent cache into exported
interfaces.

v2:
 o remove "f2fs_" for inner function {lookup,update}_extent_info suggested by
   Jaegeuk Kim.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch adds two macros for transition between byte and block offsets.
Currently, f2fs only supports 4KB blocks, so use the default size for now.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

xfstest generic/285 complains our issue in lseeking huge file.

Here is the detail output of generic/285:
"./check -f2fs tests/generic/285
Ran: generic/285
Failures: generic/285
Failed 1 of 1 tests

10. Test a huge file for offset overflow
10.01 SEEK_HOLE expected 65536 or 8589934592, got 65536.          succ
10.02 SEEK_HOLE expected 65536 or 8589934592, got 65536.          succ
10.03 SEEK_DATA expected 0 or 0, got 0.                           succ
10.04 SEEK_DATA expected 1 or 1, got 1.                           succ
10.05 SEEK_HOLE expected 8589934592 or 8589934592, got 0.         FAIL
10.06 SEEK_DATA expected 8589869056 or 8589869056, got 8589869056. succ
10.07 SEEK_DATA expected 8589869057 or 8589869057, got 8589869057. succ
10.08 SEEK_DATA expected 8589869056 or 8589869056, got 4294901760. FAIL"

The reason of this issue is:
We will calculate current offset through left shifting page-offset with
PAGE_CACHE_SHIFT bits, but our page-offset is a type of unsigned long, its size
is 4 bytes in 32-bits machine.

So if our page-offset is bigger than (1 << 32 / pagesize - 1), result of left
shifting will overflow.

Let's fix this issue by casting type of page-offset to type of current offset:
loff_t.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

In this patch we add the FS_IOC_GETVERSION ioctl for getting i_generation from
inode, after that, users can list file's generation number by using "lsattr -v".
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

If cp_error is set, we should avoid all the infinite loop.
In f2fs_sync_file, there is a hole, and this patch fixes that.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Nobody uses it anymore.

[akpm@linux-foundation.org: fix filemap_xip.c]
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch uses dn->data_blkaddr as a parameter for the destination block
address.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch activates f2fs_trace_ios.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch adds two new ioctls to release inmemory pages grabbed by atomic
writes.
 o f2fs_ioc_abort_volatile_write
  - If transaction was failed, all the grabbed pages and data should be written.
 o f2fs_ioc_release_volatile_write
  - This is to enhance the performance of PERSIST mode in sqlite.

In order to avoid huge memory consumption which causes OOM, this patch changes
volatile writes to use normal dirty pages, instead blocked flushing to the disk
as long as system does not suffer from memory pressure.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Added some commentaries for code readability and cleaned up if-statement
clearly.
Signed-off-by: NChangman Lee <cm224.lee@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

If inode state is dirty, go straight to write.
Suggested-by: NJaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: NChangman Lee <cm224.lee@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

If file is closed, let's drop inmemory pages.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

We've already made fi and sbi for inode. Let's avoid duplicated work.
Signed-off-by: NChangman Lee <cm224.lee@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

If i_size becomes large outside of MAX_INLINE_DATA, we shoud convert the inode.
Otherwise, we can make some dirty pages during the truncation, and those pages
will be written through f2fs_write_data_page.
At that moment, the inode has still inline_data, so that it tries to write non-
zero pages into inline_data area.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

The scenario is like this.

One trhead triggers:
  f2fs_write_data_pages
    lock_page
    f2fs_write_data_page
      f2fs_lock_op  <- wait

The other thread triggers:
  f2fs_truncate
    truncate_blocks
      f2fs_lock_op
        truncate_partial_data_page
          lock_page  <- wait for locking the page

This patch resolves this bug by relocating truncate_partial_data_page.
This function is just to truncate user data page and not related to FS
consistency as well.
And, we don't need to call truncate_inline_data. Rather than that,
f2fs_write_data_page will finally update inline_data later.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

The roll-forward mechanism should be activated when the number of active
logs is not 2.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

If a system wants to reduce the booting time as a top priority, now we can
use a mount option, -o fastboot.
With this option, f2fs conducts a little bit slow write_checkpoint, but
it can avoid the node page reads during the next mount time.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch simplifies the inline_data usage with the following rule.
1. inline_data is set during the file creation.
2. If new data is requested to be written ranges out of inline_data,
 f2fs converts that inode permanently.
3. There is no cases which converts non-inline_data inode to inline_data.
4. The inline_data flag should be changed under inode page lock.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

If the inode has inline_dentry, we should not truncate any block indices.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Add inline dir functions into normal dir ops' function to handle inline ops.
Besides, we enable inline dir mode when a new dir inode is created if
inline_data option is on.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch fixes to call f2fs_unlock_op, which was missing before.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

The sceanrio is like this.
inline_data   i_size     page                 write_begin/vm_page_mkwrite
  X             30       dirty_page
  X             30                            write to #4096 position
  X             30       get_dnode_of_data    wait for get_dnode_of_data
  O             30       write inline_data
  O             30                            get_dnode_of_data
  O             30                            reserve data block
..

In this case, we have #0 = NEW_ADDR and inline_data as well.
We should not allow this condition for further access.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Let's consider the following scenario.

blkaddr[0] inline_data i_size  i_blocks writepage           truncate
  NEW        X        4096        2    dirty page #0
  NEW        X         0                                    change i_size
  NEW        X         0          2    f2fs_write_inline_data
  NEW        X         0          2    get_dnode_of_data
  NEW        X         0          2    truncate_data_blocks_range
  NULL       O         0          1    memcpy(inline_data)
  NULL       O         0          1    f2fs_put_dnode
  NULL       O         0          1                         f2fs_truncate
  NULL       O         0          1                         get_dnode_of_data
  NULL       O         0          1                       *invalid block addr*

This patch adds checking inline_data flag during f2fs_truncate not to refer
corrupted block indices.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch adds support for volatile writes which keep data pages in memory
until f2fs_evict_inode is called by iput.

For instance, we can use this feature for the sqlite database as follows.
While supporting atomic writes for main database file, we can keep its journal
data temporarily in the page cache by the following sequence.

1. open
 -> ioctl(F2FS_IOC_START_VOLATILE_WRITE);
2. writes
 : keep all the data in the page cache.
3. flush to the database file with atomic writes
  a. ioctl(F2FS_IOC_START_ATOMIC_WRITE);
  b. writes
  c. ioctl(F2FS_IOC_COMMIT_ATOMIC_WRITE);
4. close
 -> drop the cached data
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch introduces a very limited functionality for atomic write support.
In order to support atomic write, this patch adds two ioctls:
 o F2FS_IOC_START_ATOMIC_WRITE
 o F2FS_IOC_COMMIT_ATOMIC_WRITE

The database engine should be aware of the following sequence.
1. open
 -> ioctl(F2FS_IOC_START_ATOMIC_WRITE);
2. writes
  : all the written data will be treated as atomic pages.
3. commit
 -> ioctl(F2FS_IOC_COMMIT_ATOMIC_WRITE);
  : this flushes all the data blocks to the disk, which will be shown all or
  nothing by f2fs recovery procedure.
4. repeat to #2.

The IO pattens should be:

  ,- START_ATOMIC_WRITE                  ,- COMMIT_ATOMIC_WRITE
 CP | D D D D D D | FSYNC | D D D D | FSYNC ...
                      `- COMMIT_ATOMIC_WRITE
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch cleans up f2fs_ioctl functions for better readability.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch introduces FITRIM in f2fs_ioctl.
In this case, f2fs will issue small discards and prefree discards as many as
possible for the given area.
Reviewed-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Now punching hole in directory is not supported in f2fs, so let's limit file
type in punch_hole().

In addition, in punch_hole if offset is exceed file size, we should skip
punching hole.
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

By using FALLOC_FL_KEEP_SIZE in ->fallocate of f2fs, we can fallocate block past
EOF without changing i_size of inode. These blocks past EOF will not be
truncated in ->setattr as we truncate them only when change the file size.

We should give a chance to truncate blocks out of filesize in setattr().
Signed-off-by: NChao Yu <chao2.yu@samsung.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

In f2fs_sync_file, if there is no written appended writes, it skips
to write its node blocks.
But, if there is up-to-date inode page, we should write it to update
its metadata during the roll-forward recovery.
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

This patch revisited whole the recovery information during the f2fs_sync_file.

In this patch, there are three information to make a decision.

a) IS_CHECKPOINTED,	/* is it checkpointed before? */
b) HAS_FSYNCED_INODE,	/* is the inode fsynced before? */
c) HAS_LAST_FSYNC,	/* has the latest node fsync mark? */

And, the scenarios for our rule are based on:

[Term] F: fsync_mark, D: dentry_mark

1. inode(x) | CP | inode(x) | dnode(F)
2. inode(x) | CP | inode(F) | dnode(F)
3. inode(x) | CP | dnode(F) | inode(x) | inode(F)
4. inode(x) | CP | dnode(F) | inode(F)
5. CP | inode(x) | dnode(F) | inode(DF)
6. CP | inode(DF) | dnode(F)
7. CP | dnode(F) | inode(DF)
8. CP | dnode(F) | inode(x) | inode(DF)

For example, #3, the three conditions should be changed as follows.

   inode(x) | CP | dnode(F) | inode(x) | inode(F)
a)    x       o      o          o          o
b)    x       x      x          x          o
c)    x       o      o          x          o

If f2fs_sync_file stops   ------^,
 it should write inode(F)    --------------^

So, the need_inode_block_update should return true, since
 c) get_nat_flag(e, HAS_LAST_FSYNC), is false.

For example, #8,
      CP | alloc | dnode(F) | inode(x) | inode(DF)
a)    o      x        x          x          x
b)    x               x          x          o
c)    o               o          x          o

If f2fs_sync_file stops   -------^,
 it should write inode(DF)    --------------^

Note that, the roll-forward policy should follow this rule, which means,
if there are any missing blocks, we doesn't need to recover that inode.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

If user wrote F2FS_IPU_FSYNC:4 in /sys/fs/f2fs/ipu_policy, f2fs_sync_file
only starts to try in-place-updates.
And, if the number of dirty pages is over /sys/fs/f2fs/min_fsync_blocks, it
keeps out-of-order manner. Otherwise, it triggers in-place-updates.

This may be used by storage showing very high random write performance.

For example, it can be used when,

Seq. writes (Data) + wait + Seq. writes (Node)

is pretty much slower than,

Rand. writes (Data)
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>