- 16 4月, 2013 2 次提交
-
-
由 Wei Yongjun 提交于
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
Keep a STP port path cost value if it was set by a user. Don't replace it with the link-speed based path cost whenever the link goes down and comes back up. Reported-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 4月, 2013 1 次提交
-
-
由 Cong Wang 提交于
Tomas reported the following build error: net/built-in.o: In function `ieee80211_unregister_hw': (.text+0x10f0e1): undefined reference to `unregister_inet6addr_notifier' net/built-in.o: In function `ieee80211_register_hw': (.text+0x10f610): undefined reference to `register_inet6addr_notifier' make: *** [vmlinux] Error 1 when built IPv6 as a module. So we have to statically link these symbols. Reported-by: NTomas Melin <tomas.melin@iki.fi> Cc: Tomas Melin <tomas.melin@iki.fi> Cc: "David S. Miller" <davem@davemloft.net> Cc: YOSHIFUJI Hidaki <yoshfuji@linux-ipv6.org> Signed-off-by: NCong Wang <amwang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 4月, 2013 1 次提交
-
-
由 Thomas Petazzoni 提交于
The mvmdio driver uses the phylib API, so it should select the PHYLIB symbol, otherwise, a build with mvmdio (but without mvneta) fails to build with undefined symbols such as mdiobus_unregister, mdiobus_free, etc. The mvneta driver does not use the phylib API directly, so it does not need to select PHYLIB. It already selects the mvmdio driver anyway. Historically, this problem is due to the fact that the PHY handling was originally part of mvneta, and was later moved to a separate driver, without updating the Kconfig select statements accordingly. And since there was no functional reason to use mvmdio without mvneta, this case was not tested. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Reported-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 4月, 2013 5 次提交
-
-
由 David Ward 提交于
(Adapted from a very similar change to net/802/garp.c by Cong Wang.) mrp_pdu_queue() should ways be called with the applicant spin lock. mrp_uninit_applicant() only holds the rtnl lock which is not enough; a race is possible because mrp_rcv() is called in BH context: mrp_rcv() |->mrp_pdu_parse_msg() |->mrp_pdu_parse_vecattr() |->mrp_pdu_parse_vecattr_event() |-> mrp_attr_event() |-> mrp_pdu_append_vecattr_event() |-> mrp_pdu_queue() Cc: Cong Wang <amwang@redhat.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid Ward <david.ward@ll.mit.edu> Acked-by: NCong Wang <amwang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. [ Bug added in linux-3.8 , commit 4008e97f ("tuntap: fix ambigious multiqueue API") ] Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivan Vecera 提交于
The driver should use return value of __vlan_put_tag with appropriate NULL-check instead of old skb pointer. Signed-off-by: NIvan Vecera <ivecera@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://gitorious.org/linux-can/linux-can由 David S. Miller 提交于
Marc Kleine-Budde says: ==================== here's another fix for the v3.9 release cycle, if not too late: Christoph Fritz fixed the device tree property handling on little endian systems in the sja1000 device tree driver. It was Mylene Josserand who noticed that the mcp251x spi CAN driver cannot request its interrupt anymore, as the driver is using a threaded interrupt handler without a primary one and without specifying IRQF_ONESHOT (which is needed since v3.5). A patch by me fixes this problem. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf由 David S. Miller 提交于
Pablo Neira Ayuso says: ==================== The following patchset contains late netfilter fixes for your net tree, they are: * Don't drop segmented TCP packets in the SIP helper, we've got reports from users that this was breaking communications when the SIP phone messages are larger than the MTU, from Patrick McHardy. * Fix refcount leak in the ipset list set, from Jozsef Kadlecsik. * On hash set resizing, the nomatch flag was lost, thus entirely inverting the logic of the set matching, from Jozsef Kadlecsik. * Fix crash on NAT modules removal. Timer expiration may race with the module cleanup exit path while deleting conntracks, from Florian Westphal. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 4月, 2013 8 次提交
-
-
由 Christoph Fritz 提交于
To get correct endianes on little endian cpus (like arm) while reading device tree properties, this patch replaces of_get_property() with of_property_read_u32(). While there use of_property_read_bool() for the handling of the boolean "nxp,no-comparator-bypass" property. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: NChristoph Fritz <chf.fritz@googlemail.com> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Marc Kleine-Budde 提交于
Since commit: 1c6c6952 genirq: Reject bogus threaded irq requests threaded irqs must provide a primary handler or set the IRQF_ONESHOT flag. Since the mcp251x driver doesn't make use of a primary handler set the IRQF_ONESHOT flag. Cc: linux-stable <stable@vger.kernel.org> # >= v3.5 Reported-by: NMylene Josserand <Mylene.Josserand@navocap.com> Tested-by: NMylene Josserand <Mylene.Josserand@navocap.com> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Florian Westphal 提交于
following oops was reported: RIP: 0010:[<ffffffffa03227f2>] [<ffffffffa03227f2>] nf_nat_cleanup_conntrack+0x42/0x70 [nf_nat] RSP: 0018:ffff880202c63d40 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8801ac7bec28 RCX: ffff8801d0eedbe0 RDX: dead000000200200 RSI: 0000000000000011 RDI: ffffffffa03265b8 [..] Call Trace: [..] [<ffffffffa02febed>] destroy_conntrack+0xbd/0x110 [nf_conntrack] Happens when a conntrack timeout expires right after first part of the nat cleanup has completed (bysrc hash removal), but before part 2 has completed (re-initialization of nat area). [ destroy callback tries to delete bysrc again ] Patrick suggested to just remove the affected conntracks -- the connections won't work properly anyway without nat transformation. So, lets do that. Reported-by: NCAI Qian <caiqian@redhat.com> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: NFlorian Westphal <fw@strlen.de> Acked-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Thomas Graf 提交于
If a TCP retransmission gets partially ACKed and collapsed multiple times it is possible for the headroom to grow beyond 64K which will overflow the 16bit skb->csum_start which is based on the start of the headroom. It has been observed rarely in the wild with IPoIB due to the 64K MTU. Verify if the acking and collapsing resulted in a headroom exceeding what csum_start can cover and reallocate the headroom if so. A big thank you to Jim Foraker <foraker1@llnl.gov> and the team at LLNL for helping out with the investigation and testing. Reported-by: NJim Foraker <foraker1@llnl.gov> Signed-off-by: NThomas Graf <tgraf@suug.ch> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christian Ruppert 提交于
If the DesignWare MAC is synthesised with MMC RX IPC Counter, an unmanaged and unacknowledged interrupt is generated after some time of operation. This patch masks the undesired interrupts. Signed-off-by: NChristian Ruppert <christian.ruppert@abilis.com> Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 nikolay@redhat.com 提交于
While enslaving a new device and after IFF_BONDING flag is set, in case of failure it is not stripped from the device's priv_flags while cleaning up, which could lead to other problems. Cleaning at err_close because the flag is set after dev_open(). v2: no change Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 nikolay@redhat.com 提交于
In commit 471cb5a3 ("bonding: remove usage of dev->master") a bug was introduced which causes a NULL pointer dereference. If a bond device is in mode 6 (ALB) and a slave is added it will dereference a NULL pointer in bond_slave_netdev_event(). This is because in bond_enslave we have bond_alb_init_slave() which changes the MAC address of the slave and causes a NETDEV_CHANGEADDR. Then we have in bond_slave_netdev_event(): struct slave *slave = bond_slave_get_rtnl(slave_dev); struct bonding *bond = slave->bond; bond_slave_get_rtnl() dereferences slave_dev->rx_handler_data which at that time is NULL since netdev_rx_handler_register() is called later. This is fixed by checking if slave is NULL before dereferencing it. v2: Comment style changed. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Popov 提交于
There is a bug in cookie_v4_check (net/ipv4/syncookies.c): flowi4_init_output(&fl4, 0, sk->sk_mark, RT_CONN_FLAGS(sk), RT_SCOPE_UNIVERSE, IPPROTO_TCP, inet_sk_flowi_flags(sk), (opt && opt->srr) ? opt->faddr : ireq->rmt_addr, ireq->loc_addr, th->source, th->dest); Here we do not respect sk->sk_bound_dev_if, therefore wrong dst_entry may be taken. This dst_entry is used by new socket (get_cookie_sock -> tcp_v4_syn_recv_sock), so its packets may take the wrong path. Signed-off-by: NDmitry Popov <dp@highloadlab.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 4月, 2013 8 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) cfg80211_conn_scan() must be called with the sched_scan_mutex, fix from Artem Savkov. 2) Fix regression in TCP ICMPv6 processing, we do not want to treat redirects as socket errors, from Christoph Paasch. 3) Fix several recvmsg() msg_name kernel memory leaks into userspace, in ATM, AX25, Bluetooth, CAIF, IRDA, s390 IUCV, L2TP, LLC, Netrom, NFC, Rose, TIPC, and VSOCK. From Mathias Krause and Wei Yongjun. 4) Fix AF_IUCV handling of segmented SKBs in recvmsg(), from Ursula Braun and Eric Dumazet. 5) CAN gw.c code does kfree() on SLAB cache memory, use kmem_cache_free() instead. Fix from Wei Yongjun. 6) Fix LSM regression on TCP SYN/ACKs, some LSMs such as SELINUX want an skb->sk socket context available for these packets, but nothing else requires it. From Eric Dumazet and Paul Moore. 7) Fix ipv4 address lifetime processing so that we don't perform sleepable acts inside of rcu_read_lock() sections, do them in an rtnl_lock() section instead. From Jiri Pirko. 8) mvneta driver accidently sets HW features after device registry, it should do so beforehand. Fix from Willy Tarreau. 9) Fix bonding unload races more correctly, from Nikolay Aleksandrov and Veaceslav Falico. 10) rtnl_dump_ifinfo() and rtnl_calcit() invoke nlmsg_parse() with wrong header size argument. Fix from Michael Riesch. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) lsm: add the missing documentation for the security_skb_owned_by() hook bnx2x: Prevent null pointer dereference in AFEX mode e100: Add dma mapping error check selinux: add a skb_owned_by() hook can: gw: use kmem_cache_free() instead of kfree() netrom: fix invalid use of sizeof in nr_recvmsg() qeth: fix qeth_wait_for_threads() deadlock for OSN devices af_iucv: fix recvmsg by replacing skb_pull() function rtnetlink: Call nlmsg_parse() with correct header length bonding: fix bonding_masters race condition in bond unloading Revert "bonding: remove sysfs before removing devices" net: mvneta: enable features before registering the driver hyperv: Fix RNDIS send_completion code path hyperv: Fix a kernel warning from netvsc_linkstatus_callback() net: ipv4: fix schedule while atomic bug in check_lifetime() net: ipv4: reset check_lifetime_work after changing lifetime bnx2x: Fix KR2 rapid link flap sctp: remove 'sridhar' from maintainers list VSOCK: Fix missing msg_namelen update in vsock_stream_recvmsg() VSOCK: vmci - fix possible info leak in vmci_transport_dgram_dequeue() ...
-
git://linux-c6x.org/git/projects/linux-c6x-upstreaming由 Linus Torvalds 提交于
Pull C6X fix from Mark Salter. Final (?) fix from the barrier discussion. * tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: add memory barrier to arch_local_irq_restore
-
由 Paul Moore 提交于
Unfortunately we didn't catch the missing comments earlier when the patch was merged. Signed-off-by: NPaul Moore <pmoore@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
The cnic module is responsible for initializing various bnx2x structs via callbacks provided by the bnx2x module. One such struct is the queue object for the FCoE queue. If a device is working in AFEX mode and its configuration allows FCoE yet the cnic module is not loaded, it's very likely a null pointer dereference will occur, as the bnx2x will erroneously access the FCoE's queue object. Prevent said access until cnic properly registers itself. Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com> Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neil Horman 提交于
e100 uses pci_map_single, but fails to check for a dma mapping error after its use, resulting in a stack trace: [ 46.656594] ------------[ cut here ]------------ [ 46.657004] WARNING: at lib/dma-debug.c:933 check_unmap+0x47b/0x950() [ 46.657004] Hardware name: To Be Filled By O.E.M. [ 46.657004] e100 0000:00:0e.0: DMA-API: device driver failed to check map error[device address=0x000000007a4540fa] [size=90 bytes] [mapped as single] [ 46.657004] Modules linked in: [ 46.657004] w83627hf hwmon_vid snd_via82xx ppdev snd_ac97_codec ac97_bus snd_seq snd_pcm snd_mpu401 snd_mpu401_uart ns558 snd_rawmidi gameport parport_pc e100 snd_seq_device parport snd_page_alloc snd_timer snd soundcore skge shpchp k8temp mii edac_core i2c_viapro edac_mce_amd nfsd auth_rpcgss nfs_acl lockd sunrpc binfmt_misc uinput ata_generic pata_acpi radeon i2c_algo_bit drm_kms_helper ttm firewire_ohci drm firewire_core pata_via sata_via i2c_core sata_promise crc_itu_t [ 46.657004] Pid: 792, comm: ip Not tainted 3.8.0-0.rc6.git0.1.fc19.x86_64 #1 [ 46.657004] Call Trace: [ 46.657004] <IRQ> [<ffffffff81065ed0>] warn_slowpath_common+0x70/0xa0 [ 46.657004] [<ffffffff81065f4c>] warn_slowpath_fmt+0x4c/0x50 [ 46.657004] [<ffffffff81364cfb>] check_unmap+0x47b/0x950 [ 46.657004] [<ffffffff8136522f>] debug_dma_unmap_page+0x5f/0x70 [ 46.657004] [<ffffffffa030f0f0>] ? e100_tx_clean+0x30/0x210 [e100] [ 46.657004] [<ffffffffa030f1a8>] e100_tx_clean+0xe8/0x210 [e100] [ 46.657004] [<ffffffffa030fc6f>] e100_poll+0x56f/0x6c0 [e100] [ 46.657004] [<ffffffff8159dce1>] ? net_rx_action+0xa1/0x370 [ 46.657004] [<ffffffff8159ddb2>] net_rx_action+0x172/0x370 [ 46.657004] [<ffffffff810703bf>] __do_softirq+0xef/0x3d0 [ 46.657004] [<ffffffff816e4ebc>] call_softirq+0x1c/0x30 [ 46.657004] [<ffffffff8101c485>] do_softirq+0x85/0xc0 [ 46.657004] [<ffffffff81070885>] irq_exit+0xd5/0xe0 [ 46.657004] [<ffffffff816e5756>] do_IRQ+0x56/0xc0 [ 46.657004] [<ffffffff816dacb2>] common_interrupt+0x72/0x72 [ 46.657004] <EOI> [<ffffffff816da1eb>] ? _raw_spin_unlock_irqrestore+0x3b/0x70 [ 46.657004] [<ffffffff816d124d>] __slab_free+0x58/0x38b [ 46.657004] [<ffffffff81214424>] ? fsnotify_clear_marks_by_inode+0x34/0x120 [ 46.657004] [<ffffffff811b0417>] ? kmem_cache_free+0x97/0x320 [ 46.657004] [<ffffffff8157fc14>] ? sock_destroy_inode+0x34/0x40 [ 46.657004] [<ffffffff8157fc14>] ? sock_destroy_inode+0x34/0x40 [ 46.657004] [<ffffffff811b0692>] kmem_cache_free+0x312/0x320 [ 46.657004] [<ffffffff8157fc14>] sock_destroy_inode+0x34/0x40 [ 46.657004] [<ffffffff811e8c28>] destroy_inode+0x38/0x60 [ 46.657004] [<ffffffff811e8d5e>] evict+0x10e/0x1a0 [ 46.657004] [<ffffffff811e9605>] iput+0xf5/0x180 [ 46.657004] [<ffffffff811e4338>] dput+0x248/0x310 [ 46.657004] [<ffffffff811ce0e1>] __fput+0x171/0x240 [ 46.657004] [<ffffffff811ce26e>] ____fput+0xe/0x10 [ 46.657004] [<ffffffff8108d54c>] task_work_run+0xac/0xe0 [ 46.657004] [<ffffffff8106c6ed>] do_exit+0x26d/0xc30 [ 46.657004] [<ffffffff8109eccc>] ? finish_task_switch+0x7c/0x120 [ 46.657004] [<ffffffff816dad58>] ? retint_swapgs+0x13/0x1b [ 46.657004] [<ffffffff8106d139>] do_group_exit+0x49/0xc0 [ 46.657004] [<ffffffff8106d1c4>] sys_exit_group+0x14/0x20 [ 46.657004] [<ffffffff816e3b19>] system_call_fastpath+0x16/0x1b [ 46.657004] ---[ end trace 4468c44e2156e7d1 ]--- [ 46.657004] Mapped at: [ 46.657004] [<ffffffff813663d1>] debug_dma_map_page+0x91/0x140 [ 46.657004] [<ffffffffa030e8eb>] e100_xmit_prepare+0x12b/0x1c0 [e100] [ 46.657004] [<ffffffffa030c924>] e100_exec_cb+0x84/0x140 [e100] [ 46.657004] [<ffffffffa030e56a>] e100_xmit_frame+0x3a/0x190 [e100] [ 46.657004] [<ffffffff8159ee89>] dev_hard_start_xmit+0x259/0x6c0 Easy fix, modify the cb paramter to e100_exec_cb to return an error, and do the dma_mapping_error check in the obvious place This was reported previously here: http://article.gmane.org/gmane.linux.network/257893 But nobody stepped up and fixed it. CC: Josh Boyer <jwboyer@redhat.com> CC: e1000-devel@lists.sourceforge.net Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> Reported-by: NMichal Jaegermann <michal@harddata.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
Pull another nfs fixlet from Trond Myklebust: "I suddenly noticed that a one-line issue that I _thought_ I had fixed with the nfs41_walk_client_list patch was apparently still there in the pull request I sent earlier today. I'm very sorry for not catching that in time. - Fix a brain fart in nfs41_walk_client_list" * tag 'nfs-for-3.9-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: Doh! Typo in the fix to nfs41_walk_client_list
-
由 Trond Myklebust 提交于
Make sure that we set the status to 0 on success. Missed in testing because it never appears when doing multiple mounts to _different_ servers. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: <stable@vger.kernel.org> # 3.7.x: 7b1f1fd1: NFSv4/4.1: Fix bugs in nfs4[01]_walk_client_list
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
Pull NFS client bugfixes from Trond Myklebust: - fix for memory corruption issues in nfs4[01]_walk_client_list (stable) - fix for an Oopsable bug in rpc_clone_client (stable) - another state manager deadlock in the NFSv4 open code - memory leaks in nfs4_discover_server_trunking and rpc_new_client * tag 'nfs-for-3.9-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: Fix another potential state manager deadlock SUNRPC: Fix a potential memory leak in rpc_new_client NFSv4/4.1: Fix bugs in nfs4[01]_walk_client_list NFSv4: Fix a memory leak in nfs4_discover_server_trunking SUNRPC: Remove extra xprt_put()
-
- 10 4月, 2013 15 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fixes from Herbert Xu: "This fixes a GCM bug that breaks IPsec and a compile problem in ux500." * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: ux500 - add missing comma crypto: gcm - fix assumption that assoc has one segment
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Just a spare semicolon in nouveau that caused some issues, and an mgag200 fix" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/mgag200: Index 24 in extended CRTC registers is 24 in hex, not decimal. drm/nouveau: fix unconditional return waiting on memory
-
由 Christopher Harvey 提交于
This change properly enables the "requester" in G200ER cards that is responsible for getting pixels out of memory and clocking them out to the screen. Signed-off-by: NChristopher Harvey <charvey@matrox.com> Cc: stable@vger.kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Mark Salter 提交于
arch_local_irq_save() and friends are required to act as compiler memory barriers. This patch adds a "memory" clobber to the inline asm code in arch_local_irq_restore() which is used as the building block for other functions needing to set/clear the interrupt enable in the CSR register. Signed-off-by: NMark Salter <msalter@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs fixes from Al Viro: "A nasty bug in fs/namespace.c caught by Andrey + a couple of less serious unpleasantness - ecryptfs misc device playing hopeless games with try_module_get() and palinfo procfs support being... not quite correctly done, to be polite." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: mnt: release locks on error path in do_loopback palinfo fixes procfs: add proc_remove_subtree() ecryptfs: close rmmod race
-
git://github.com/awilliam/linux-vfio由 Linus Torvalds 提交于
Pull vfio overflow fix from Alex Williamson. * tag 'vfio-v3.9-rc7' of git://github.com/awilliam/linux-vfio: vfio-pci: Fix possible integer overflow
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fixes from Jens Axboe: "I've got a few smaller fixes queued up for 3.9 that should go in. The major one is the loop regression, the others are nice fixes on their own though. It contains: - Fix for unitialized var in the block sysfs code, courtesy of Arnd and gcc-4.8. - Two fixes for mtip32xx, fixing probe and command timeout. Also a debug measure that could have waited for 3.10, but it's driver only, so I let it slip in. - Revert the loop partition cleanup fix, it could cause a deadlock on auto-teardown as part of umount. The fix is clear, but at this point we just want to revert it and get a real fix in for 3.10." * tag 'for-linus-20130409' of git://git.kernel.dk/linux-block: Revert "loop: cleanup partitions when detaching loop device" mtip32xx: fix two smatch warnings mtip32xx: Add debugfs entry device_status mtip32xx: return 0 from pci probe in case of rebuild mtip32xx: recovery from command timeout block: avoid using uninitialized value in from queue_var_store
-
由 Jozsef Kadlecsik 提交于
If a resize is triggered the nomatch flag is not excluded at hashing, which leads to the element missed at lookup in the resized set. Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Jozsef Kadlecsik 提交于
The last element can be replaced or pushed off and in both cases the reference counter must be updated. Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Andrey Vagin 提交于
do_loopback calls lock_mount(path) and forget to unlock_mount if clone_mnt or copy_mnt fails. [ 77.661566] ================================================ [ 77.662939] [ BUG: lock held when returning to user space! ] [ 77.664104] 3.9.0-rc5+ #17 Not tainted [ 77.664982] ------------------------------------------------ [ 77.666488] mount/514 is leaving the kernel with locks still held! [ 77.668027] 2 locks held by mount/514: [ 77.668817] #0: (&sb->s_type->i_mutex_key#7){+.+.+.}, at: [<ffffffff811cca22>] lock_mount+0x32/0xe0 [ 77.671755] #1: (&namespace_sem){+++++.}, at: [<ffffffff811cca3a>] lock_mount+0x4a/0xe0 Signed-off-by: NAndrey Vagin <avagin@openvz.org> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
* check for proc_mkdir() failures * fix buffer overrun - sizeof(format string) is *not* enough to hold sprintf() result. * use proc_remove_subtree(); life's much easier with it Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
just what it sounds like; do that only to procfs subtrees you've created - doing that to something shared with another driver is not only antisocial, but might cause interesting races with proc_create() and its ilk. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Linus Torvalds 提交于
In UP and non-preempt respectively, the spinlocks and preemption disable/enable points are stubbed out entirely, because there is no regular code that can ever hit the kind of concurrency they are meant to protect against. However, while there is no regular code that can cause scheduling, we _do_ end up having some exceptional (literally!) code that can do so, and that we need to make sure does not ever get moved into the critical region by the compiler. In particular, get_user() and put_user() is generally implemented as inline asm statements (even if the inline asm may then make a call instruction to call out-of-line), and can obviously cause a page fault and IO as a result. If that inline asm has been scheduled into the middle of a preemption-safe (or spinlock-protected) code region, we obviously lose. Now, admittedly this is *very* unlikely to actually ever happen, and we've not seen examples of actual bugs related to this. But partly exactly because it's so hard to trigger and the resulting bug is so subtle, we should be extra careful to get this right. So make sure that even when preemption is disabled, and we don't have to generate any actual *code* to explicitly tell the system that we are in a preemption-disabled region, we need to at least tell the compiler not to move things around the critical region. This patch grew out of the same discussion that caused commits 79e5f05e ("ARC: Add implicit compiler barrier to raw_local_irq* functions") and 3e2e0d2c ("tile: comment assumption about __insn_mtspr for <asm/irqflags.h>") to come about. Note for stable: use discretion when/if applying this. As mentioned, this bug may never have actually bitten anybody, and gcc may never have done the required code motion for it to possibly ever trigger in practice. Cc: stable@vger.kernel.org Cc: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://gitorious.org/linux-can/linux-can由 David S. Miller 提交于
Marc Kleine-Budde says: ==================== here's a fix for the v3.9 release cycle, if not too late: Wei Yongjun contributes a patch for the can-gw protocoll. The patch fixes the memory allocated with kmem_cache_alloc(), is now freed using kmem_cache_free(), not kfree(). ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-