This reverts commit 6dffd431.

Adding new mode flags willy nilly breaks existing userspace. We need to
coordinate this better, potentially with a new client cap that only
exposes the aspect ratio flags when userspace is prepared for them
(similar to what we do with stereo 3D modes).

This also broke things so that we would always send out VIC==0 in
the AVI infoframe unless the user specified an aspect ratio via
the mode flags. And the automagic RGB full vs. limited range
handling was similartly broken as the user mode would never match
any CEA mode.

Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Lin, Jia <lin.a.jia@intel.com>
Cc: Akashdeep Sharma <akashdeep.sharma@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478176304-6743-2-git-send-email-ville.syrjala@linux.intel.com

This reverts commit a68362fe.

Adding new mode flags willy nilly breaks existing userspace. We need to
coordinate this better, potentially with a new client cap that only
exposes the aspect ratio flags when userspace is prepared for them
(similar to what we do with stereo 3D modes).

Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Lin, Jia <lin.a.jia@intel.com>
Cc: Akashdeep Sharma <akashdeep.sharma@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478176304-6743-1-git-send-email-ville.syrjala@linux.intel.com

I'll want to print things in a similar way in a later patch.  This will
make it easier.
Signed-off-by: NRob Clark <robdclark@gmail.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1478358492-30738-2-git-send-email-robdclark@gmail.com

We have reached the era where monitor bandwidths now exceed 31bits in
frequency calculations, though as we stored them in kHz units we are
safe from overflow in the modelines for some time.

[   48.723720] UBSAN: Undefined behaviour in ../drivers/gpu/drm/drm_modes.c:325:49
[   48.726943] signed integer overflow:
[   48.728503] 2240 * 1000000 cannot be represented in type 'int'
Reported-by: NMartin Liška <marxin.liska@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98372Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161021141540.26837-1-chris@chris-wilson.co.uk

HDMI 2.0/CEA-861-F introduces two new aspect ratios:
- 64:27
- 256:135

This patch:
-  Adds new DRM flags for to represent these new aspect ratios.
-  Adds new cases to handle these aspect ratios while converting
from user->kernel mode or vise versa.

V2: Rebase
V3: Align macro for DRM_MODE_PICTURE_ASPECT_256_135 (Jim Bride)
V4: Added r-b from Jose.
Signed-off-by: NShashank Sharma <shashank.sharma@intel.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Reviewed-by: NJose Abreu <Jose.Abreu@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1476705880-15600-5-git-send-email-shashank.sharma@intel.com

Current DRM layer functions don't parse aspect ratio information
while converting a user mode->kernel mode or vice versa. This
causes modeset to pick mode with wrong aspect ratio, eventually
causing failures in HDMI compliance test cases, due to wrong VIC.

This patch adds aspect ratio information in DRM's mode conversion
and mode comparision functions, to make sure kernel picks mode
with right aspect ratio (as per the VIC).

V2: Addressed review comments from Sean:
- Fix spellings/typo
- No need to handle aspect ratio none
- Add a break, for default case too
V3: Rebase
V4: Added r-b from Jose
Signed-off-by: NShashank Sharma <shashank.sharma@intel.com>
Signed-off-by: NLin, Jia <lin.a.jia@intel.com>
Signed-off-by: NAkashdeep Sharma <akashdeep.sharma@intel.com>
Reviewed-by: NJim Bride <jim.bride@linux.intel.com>
Reviewed-by: NJose Abreu <Jose.Abreu@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1476705880-15600-3-git-send-email-shashank.sharma@intel.com

Describe the new parameter 'bus_flags' to of_get_drm_display_mode() in
the kerneldoc comments and add kerneldoc comments to the new function
drm_bus_flags_from_videomode().
Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1471354477-25877-1-git-send-email-LW@KARO-electronics.de

The 'de-active' and 'pixelclk-active' DT properties are evaluated
by of_parse_display_timing() called from  of_get_drm_display_mode(),
but later lost in the conversion from videomode.flags to
drm_display_mode.flags.
Enhance of_get_drm_display_mode() to also return the bus flags in a
separate variable, so that they can be passed on to the ipu-di
driver.
Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

add a helper function to extract information about pixel clock and DE
polarity from DT for use by of_get_drm_display_mode().
While at it, convert spaces to tabs in indentation in drm_modes.h.
Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

Just fallout from switching from asciidoc to sphinx/rst.

v2: Found more. Also s/\//#/ in the vgpu ascii-art - sphinx treats
those as comments and switch to variable-width, which wreaks the
layout.

v3: Undo some of the hacks, rebasing onto latest version of Jani's
series fixed it.
Acked-by: NLiviu Dudau <Liviu.Dudau@arm.com>
Acked-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

Mostly this is unexpected indents. But really it's just a
demonstration for my patch, all these issues have been found&fixed
using the correct source file and line number support I just added.
All line numbers have been perfectly accurate.

One issue looked a bit fishy in intel_lrc.c, where I don't quite grok
what sphinx is unhappy about. But since that file looks like it has
never seen a proper kernel-doc parser I figured better to fix in a
separate path.

v2: Use fancy new &drm_device->struct_mutex linking (Jani).

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: linux-doc@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Acked-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

When setting mode via MODE_ID property,
drm_atomic_set_mode_prop_for_crtc() does not call
drm_mode_set_crtcinfo() which possibly causes:

"[drm:drm_calc_timestamping_constants [drm]] *ERROR* crtc 32: Can't
calculate constants, dotclock = 0!"

Whether the error is seen depends on the previous data in state->mode,
as state->mode is not cleared when setting new mode.

This patch adds drm_mode_set_crtcinfo() call to
drm_mode_convert_umode(), which is called in both legacy and atomic
paths. This should be fine as there's no reason to call
drm_mode_convert_umode() without also setting the crtc related fields.

drm_mode_set_crtcinfo() is removed from the legacy drm_mode_setcrtc() as
that is no longer needed.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

This changes the code to handle being called multiple times without
side effects. The new names seems more suitable for what it does.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The warning message in drm_mode_parse_command_line_for_connector miss
the [drm] at beginning.
This patch add it and take the opportunity to convert
printk(KERN_WARNING to pr_warn()
Signed-off-by: NLABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1454594633-15100-1-git-send-email-clabbe.montjoie@gmail.com

DRM Docbook is now Markdown ready. This means its doc is able to
use markdown text on it.

* Documentation/DocBook/drm.tmpl: Contains a table duplicated from
  drivers/gpu/drm/i915/i915_reg.h. This is not needed anymore

* drivers/gpu/drm/drm_modeset_lock.c: had a code example that used
  to look pretty bad on html. Fixed by using proper code markup.

* drivers/gpu/drm/drm_prime.c: Remove spaces between lines to make
  a proper markup list.

* drivers/gpu/drm/i915/i915_reg.h: Altought pandoc supports tables,
  it doesn't support table cell spanning. But we can use fixed-width
  for those special cases.

* include/drm/drm_vma_manager.h: Another code example that should be
  proper indented with four spaces.

v2 (Daniel): Adjust name to gpu.xml due to rename.

v3 (Daniel):
Split out the actual enabling in the Makefile - this way we can merge
the conversion, while just keeping the enabling in a drm-private tree.

Signed-off-by: Danilo Cesar Lemes de Paula <danilo.cesar@collabora.co.uk> (v1)
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Stephan Mueller <smueller@chronox.de>
Cc: Michal Marek <mmarek@suse.cz>
Cc: linux-kernel@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: intel-gfx <intel-gfx@lists.freedesktop.org>
Cc: dri-devel <dri-devel@lists.freedesktop.org>
Acked-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1448471279-19748-2-git-send-email-daniel.vetter@ffwll.ch

My latest commit introduce some case where a valid mode, could be
rejected.
simple_strtox functions stop at first non-digit character, but kstrtox
not.
So args like "video=HDMI-A-1:720x480-16@60" will be reject when checking
16@.

Discussions about this change comes to the conclusion that the best
solution is to revert my commit cc344980.
Signed-off-by: NLABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449838739-29969-1-git-send-email-clabbe.montjoie@gmail.com

Now that the mode type bit merge logic is fixed to only merge
between new probed modes, hopefully we can eliminat the special
case for qxl and virtio. That is make the merge the mode type
bits from all matching new probed modes, just like every other
driver.

qxl and virtio got excluded from the merging in
commit 3fbd6439 ("drm: copy mode type in drm_mode_connector_list_update()")
commit abce1ec9 ("Revert "drm: copy mode type in drm_mode_connector_list_update()"")
commit b87577b7 ("drm: try harder to avoid regression when merging mode bits")

Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Adam Jackson <ajax@redhat.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Resolve conflicts with doc updates.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Currently most drivers request that any mode appearing on both the
old mode list and the new probed_modes list get their type bits ORed
together if the modes are deemed to otherwise match each other.

I don't know why anyone would want to merge in the mode type bits
from any mode left over from a previous probe. For instance, you
could never get rid of ther preferred bit if a matching non-preferred
mode is returned by the new probe. So let's not merge anything from
the stale old modes, and just replace them outright with matching new
modes.

If multiple matching modes are produced by the same probe, merging
the type bits between them would seem like a sensible thing to do.
For a bit of extra finesse if two modes are considered equal we can
pick the actual timings from the one marked as preferrred. And if
multiple preferred modes are produced by the same probe somehow, we
can just favor the first one added to the probed_modes list.

You may be asking yourself why we bother with the merging at all if
nothing from the old list survives in practice. The only answer I have
is "debug output". That is we want to print out a list of pruned modes,
which is why we still want to look for duplicates with the old modes.

There was a previous attempt to get rid of the mode type merging
entirely, but it caused some kind of regression on Daniels's G33
machine. Apparently the sdvo transcoder on said machine started to
die at around the same time and has since rotted away totally, so
it may have been a red herring. So we don't have to worry about
it anymore. The relevant commits are:
commit 3fbd6439 ("drm: copy mode type in drm_mode_connector_list_update()")
commit abce1ec9 ("Revert "drm: copy mode type in drm_mode_connector_list_update()"")

It was then decided in
commit b87577b7 ("drm: try harder to avoid regression when merging mode bits")
that just qxl virtio are excluded from the merging, while everyone
else does it. That is not changed, although now even qxl and virtio
will be subject to the previously mentioned logic to choose which
actual timings are picked for the new mode.

v2: Fix typos in commit message, and clarify the details on
    the G33 regression from the previous attempt (Daniel)

Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Adam Jackson <ajax@redhat.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449234781-22332-1-git-send-email-ville.syrjala@linux.intel.com

Use 'continue' to eliminate one indent level from
drm_mode_connector_list_update(). And while at it,
make 'found_it' bool.

Cc: Adam Jackson <ajax@redhat.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449177255-9515-5-git-send-email-ville.syrjala@linux.intel.com

MODE_UNVERIFIED actually means that the mode came from a previous probe,
and if the new probe doesn't produce a matching mode it will get pruned
from the list. Rename the flag to MODE_STALE to better convey the
meaning.

v2: Rebased due to conflicts with Daniel's doc stuff

Cc: Adam Jackson <ajax@redhat.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449779948-10906-1-git-send-email-ville.syrjala@linux.intel.com

This was in the documentation for modeset helper hooks, where it is a
bit misplaced.

v2: Reindent the drm_mode_status enum, inspired by Ville.

v3: Suggestions from Ville and Thierry.

v4: Small fixup that 0day spotted.

v5: Slight change to avoid accidental headings in kerneldoc output.

Cc: ville.syrjala@linux.intel.com
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449218769-16577-27-git-send-email-daniel.vetter@ffwll.ch
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v3)
Reviewed-by: Thierry Reding <treding@nvidia.com> (v3)

Rather than using drm_match_cea_mode() to see if the EDID detailed
timings are supposed to represent one of the CEA/HDMI modes, add a
special version of that function that takes in an explicit clock
tolerance value (in kHz). When looking at the detailed timings specify
the tolerance as 5kHz due to the 10kHz clock resolution limit inherent
in detailed timings.

drm_match_cea_mode() uses the normal KHZ2PICOS() matching of clocks,
which only allows smaller errors for lower clocks (eg. for 25200 it
won't allow any error) and a bigger error for higher clocks (eg. for
297000 it actually matches 296913-297000). So it doesn't really match
what we want for the fixup. Using the explicit +-5kHz is much better
for this use case.

Not sure if we should change the normal mode matching to also use
something else besides KHZ2PICOS() since it allows a different
proportion of error depending on the clock. I believe VESA CVT
allows a maximum deviation of .5%, so using that for normal mode
matching might be a good idea?

Cc: Adam Jackson <ajax@redhat.com>
Tested-by: nathan.d.ciobanu@linux.intel.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92217
Fixes: fa3a7340 ("drm/edid: Fix up clock for CEA/HDMI modes specified via detailed timings")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The simple_strtoul function is marked as obsolete.
This patch replace it by kstrtouint.
Signed-off-by: NLABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Move the drm_display_mode <-> drm_mode_modeinfo conversion functions
from drm_crtc.c to drm_modes.c, and make them non-static so that others
can use them.
Signed-off-by: NDaniel Stone <daniels@collabora.com>
Tested-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Since we're now using mode == NULL to represent disabled, it's not
wholly surprising that we'd want to compare NULL modes.
Signed-off-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Change 'pixes' to 'pixels'
Change 'enabel' to 'enable'
Change 'enabeling' to 'enabling'
Signed-off-by: NYannick Guerrini <yguerrini@tomshardware.fr>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Currently when a mode is rejected the reason is printed as a raw number.
Having to manually decode that to a enum drm_mode_status value is
tiresome. Have the code do the decoding instead and print the result
in a human readable format.

Just having an array of strings indexed with the mode status doesn't
work since the enum includes negative values. So we offset the status
by +3 which makes all the indexes non-negative. Also add a bit of
paranoia into the code to catch out of bounds accesses in case
someone adds more enum values but forgets to update the code.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Currently when a mode is rejected the reason is printed as a raw number.
Having to manually decode that to a enum drm_mode_status value is
tiresome. Have the code do the decoding instead and print the result
in a human readable format.

Just having an array of strings indexed with the mode status doesn't
work since the enum includes negative values. So we offset the status
by +3 which makes all the indexes non-negative. Also add a bit of
paranoia into the code to catch out of bounds accesses in case
someone adds more enum values but forgets to update the code.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Add conversion from drm_display_mode to videomode.
Signed-off-by: NSteve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

Make sure the timings of probed modes at least pass some very basic
sanity checks.

The checks include:
 - clock,hdisplay,vdisplay are non zero
 - sync pulse fits within the blanking period
 - htotal,vtotal are big enough

I have not checked all the drivers to see if the modes the generate
might violate these constraints. I'm hoping not, because that would mean
either abandoning the idea of doing this from the core code, or fixing
the drivers.

I'm not entirely sure about limiting the sync pulse to the blanking
period. Intel hardware doesn't support such things, but some other
hardware might. However at least HDMI doesn't allow having sync pulse
edges within the active period, so I'm thinking the check is probably
OK to have in the common code.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Make drm_mode_validate_size() and drm_mode_validate_flag() deal with a
single mode instead of having each iterate through the mode list.

The hope is that in the future we might be able to share various mode
validation functions between modeset and get_modes.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We need to get hdisplay and vdisplay in a few places so create a
helper to make our job easier.

Note that drm_crtc_check_viewport() and intel_modeset_pipe_config() were
previously making adjustments for doublescan modes and vscan > 1 modes,
which was incorrect.  Using our new helper fixes this mistake.

v2 (by Matt): Use new stereo doubling function (suggested by Ville)

v3 (by Matt):
 - Add missing kerneldoc (Daniel)
 - Use drm_mode_copy() (Jani)

v4 (by Matt):
 - Drop stereo doubling function again; add 'stereo only' flag
   to drm_mode_set_crtcinfo() instead (Ville)

v5 (by Matt):
 - Note behavioral change in drm_crtc_check_viewport() and
   intel_modeset_pipe_config(). (Ander)
 - Describe new adjustment flags in drm_mode_set_crtcinfo()'s
   kerneldoc. (Ander)

Cc: dri-devel@lists.freedesktop.org
Suggested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Acked-by: NDave Airlie <airlied@gmail.com>
Reviewed-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch fix spelling typos found in drm.xml.
It is because the file is generated from comments in
source codes, I have to fix the typos within source files.
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

i915.ko has a custom fbdev initialisation routine that aims to preserve
the current mode set by the BIOS, unless overruled by the user. The
user's wishes are determined by what, if any, mode is specified on the
command line (via the video= parameter). However, that command line mode
is first parsed by drm_fb_helper_initial_config() which is called after
i915.ko's custom initial_config() as a fallback method. So in order for
us to honour it, we need to move the cmdline parser earlier. If we
perform the connector cmdline parsing as soon as we initialise the
connector, that cmdline mode and forced status is then available even if
the fbdev helper is not compiled in or never called.

We also then expose the cmdline user mode in the connector mode lists.

v2: Rebase after connector->name upheaval.

v3: Adapt mga200 to look for the cmdline mode in the new place. Nicely
simplifies things while at that.

v4: Fix checkpatch.

v5: Select FB_CMDLINE to adapt to the changed fbdev patch.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73154
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v2)
Cc: dri-devel@lists.freedesktop.org
Cc: Julia Lemire <jlemire@matrox.com>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For QXL hw we really want the bits to be replaced as we change
the preferred mode on the fly, and the same goes for virgl when
I get to it, however the original fix for this seems to have caused
a wierd regression on Intel G33 that in a stunning display of failure
at opposition to his normal self, Daniel failed to diagnose.

So we are left doing this, ugly ugly ugly ugly, Daniel you fixed
that G33 yet?, ugly, ugly.
Tested-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

- Tune down yelling RETURNS.
- OCD align all the parameters the same.
- Add missing kerneldoc, which also means that we need to include the
  kerneldoc from the drm_modes.h header now.
- Add missing Returns: sections.
- General polish and clarification - especially the kerneldoc for the
  mode creation helpers seems to have been some good specimen of
  copypasta gone wrong.

All actual code changes have all been extracted into prep patches
since there was simply too much to polish.

v2: More polish for the command line modeline functions.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Totally unused and actually redundant with maxX for display mode
validation. The fb helper otoh needs to check pitch limits,
but that is delegated into drivers instead.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It never fails and no one ever checked anyway.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

There's a neat FIXME asking whether this is really need. I'd
say really no.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>