- 13 3月, 2015 12 次提交
-
-
由 David S. Miller 提交于
Alexander Duyck says: ==================== fib_trie: Minor fixes for table merge This patch set addresses two issues reported with the tables merged, the first is a NULL pointer dereference, and the other is to remove a WARN_ON and set the ordering for aliases from different tables with the same slen values. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This change makes it so that we should always have a deterministic ordering for the main and local aliases within the merged table when two leaves overlap. So for example if we have a leaf with a key of 192.168.254.0. If we previously added two aliases with a prefix length of 24 from both local and main the first entry would be first and the second would be second. When I was coding this I had added a WARN_ON should such a situation occur as I wasn't sure how likely it would be. However this WARN_ON has been triggered so this is something that should be addressed. With this patch the ordering of the aliases is as follows. First they are sorted on prefix length, then on their table ID, then tos, and finally priority. This way what we end up doing is essentially interleaving the two tables on what used to be leaf_info structure boundaries. Fixes: 0ddcf43d ("ipv4: FIB Local/MAIN table collapse") Reported-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
The function fib_unmerge assumed the local table had already been allocated. If that is not the case however when custom rules are applied then this can result in a NULL pointer dereference. In order to prevent this we must check the value of the local table pointer and if it is NULL simply return 0 as there is no local table to separate from the main. Fixes: 0ddcf43d ("ipv4: FIB Local/MAIN table collapse") Reported-by: NMadhu Challa <challa@noironetworks.com> Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
I noticed that a helper function with argument type ARG_ANYTHING does not need to have an initialized value (register). This can worst case lead to unintented stack memory leakage in future helper functions if they are not carefully designed, or unintended application behaviour in case the application developer was not careful enough to match a correct helper function signature in the API. The underlying issue is that ARG_ANYTHING should actually be split into two different semantics: 1) ARG_DONTCARE for function arguments that the helper function does not care about (in other words: the default for unused function arguments), and 2) ARG_ANYTHING that is an argument actually being used by a helper function and *guaranteed* to be an initialized register. The current risk is low: ARG_ANYTHING is only used for the 'flags' argument (r4) in bpf_map_update_elem() that internally does strict checking. Fixes: 17a52670 ("bpf: verifier (add verifier core)") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Eric W. Biederman says: ==================== Introduce possible_net_t The current usage of write_pnet and read_pnet is a little laborious and error prone as you only notice if you failed to include them if are compiling with network namespaces enabled. possible_net_t remedies that by using a type that is 0 bytes when network namespaces are disabled and can only be read and written to with read_pnet and write_pnet. Aka less work and safer for the same effect. I kill hold_net and release_net first as are they are haven't been used since 2008 and are noise at the points where write_pnet and read_pnet are used. I have folded in Eric Dumazets suggestions to improve the killing of hold_net and release net. And respon. I had to respin anyway as there was enough changes elsewhere in the tree the previous version of these patches did not quite apply cleanly. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
Having to say > #ifdef CONFIG_NET_NS > struct net *net; > #endif in structures is a little bit wordy and a little bit error prone. Instead it is possible to say: > typedef struct { > #ifdef CONFIG_NET_NS > struct net *net; > #endif > } possible_net_t; And then in a header say: > possible_net_t net; Which is cleaner and easier to use and easier to test, as the possible_net_t is always there no matter what the compile options. Further this allows read_pnet and write_pnet to be functions in all cases which is better at catching typos. This change adds possible_net_t, updates the definitions of read_pnet and write_pnet, updates optional struct net * variables that write_pnet uses on to have the type possible_net_t, and finally fixes up the b0rked users of read_pnet and write_pnet. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
hold_net and release_net were an idea that turned out to be useless. The code has been disabled since 2008. Kill the code it is long past due. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Herbert Xu says: ==================== rhashtable hash cleanups This is a rebase on top of the nested lock annotation fix. Nothing to see here, just a bunch of simple clean-ups before I move onto something more substantial (hopefully). ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Now that the only caller of obj_raw_hashfn is head_hashfn, we can simply kill it and fold it into the latter. This patch also moves the common shift from head_hashfn/key_hashfn into rht_bucket_index. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Acked-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
key_hashfn has only one caller and it doesn't really need to supply the key length as an extra parameter. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Acked-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Now that we don't have cross-table hashes, we no longer need to keep the entire hash value so all users of obj_raw_hashfn can use head_hashfn instead. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Acked-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch reverts commit c88455ce ("rhashtable: key_hashfn() must return full hash value") because the only user of it always masks the hash value. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Acked-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 3月, 2015 20 次提交
-
-
由 Julia Lawall 提交于
The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ type T; identifier f; @@ static T f (...) { ... } @@ identifier r.f; declarer name EXPORT_SYMBOL; @@ -EXPORT_SYMBOL(f); // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Commit aa34a6cb ("rhashtable: Add arbitrary rehash function") killed the annotation on the nested lock which leads to bitching from lockdep. Reported-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
I forgot to use write_pnet() in three locations. Signed-off-by: NEric Dumazet <edumazet@google.com> Fixes: 33cf7c90 ("net: add real socket cookies") Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lubomir Rintel 提交于
This makes it possible to retain the route preference when RAs are handled in userspace. Signed-off-by: NLubomir Rintel <lkundrak@v3.sk> Reviewed-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Horman 提交于
Signed-off-by: NSimon Horman <simon.horman@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Horman 提交于
Flags are used in the return path rather than the return patch. Fixes: af33c1ad ("vxlan: Eliminate dependency on UDP socket in transmit path") Signed-off-by: NSimon Horman <simon.horman@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
A long standing problem in netlink socket dumps is the use of kernel socket addresses as cookies. 1) It is a security concern. 2) Sockets can be reused quite quickly, so there is no guarantee a cookie is used once and identify a flow. 3) request sock, establish sock, and timewait socks for a given flow have different cookies. Part of our effort to bring better TCP statistics requires to switch to a different allocator. In this patch, I chose to use a per network namespace 64bit generator, and to use it only in the case a socket needs to be dumped to netlink. (This might be refined later if needed) Note that I tried to carry cookies from request sock, to establish sock, then timewait sockets. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Eric Salo <salo@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
When we merged the tries for local and main I had overlooked the iterator for /proc/net/route. As a result it was outputting both local and main when the two tries were merged. This patch resolves that by only providing output for aliases that are actually in the main trie. As a result we should go back to the original behavior which I assume will be necessary to maintain legacy support. Fixes: 0ddcf43d ("ipv4: FIB Local/MAIN table collapse") Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Florian Fainelli says: ==================== net: dsa: support PHY reads/writes diversion This patch series completes the PHY reads/writes diversion when we need to use the slave MII bus provided by DSA and the underlying switch drivers to implement the real PHY reads and writes. This is particularly useful when they are conflicting MDIO bus addresses as in the case of multiple Broadcom switches connected to each other (internal and external, or just external). ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
In case a PHY is found via Device Tree, and is also flagged by the switch driver as needing indirect reads/writes using the switch driver implemented MDIO bus, make sure that we bind this PHY to the slave MII bus in order for this to happen. Without this, we would succeed in having the PHY driver probe()'s function to use slave MII bus read/write functions, because this is done during dsa_slave_mii_init(), but past that point, the PHY driver would not go through these diverted reads and writes. Fixes: 0d8bcdd3 ("net: dsa: allow for more complex PHY setups") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
In preparation for dealing with indirect reads and writes towards certain PHY devices, move the code which deals with binding the PHY device to the slave MII bus created by DSA to its own function: dsa_slave_phy_connect(). Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Export of_mdio_parse_addr() which allows parsing a given Ethernet PHY node MDIO address, verify it is within the allowed range, and return its value. This is going to be useful for the DSA code which needs to deal with multiple layers of MDIO buses. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Petri Gynther 提交于
Bits 31:16 of RDMA_PROD_INDEX contain Rx discarded packet count, which are the Rx packets that had to be dropped by MAC hardware since there was no room on the Rx queue. Add code to collect this information into the netdev stats. Signed-off-by: NPetri Gynther <pgynther@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
The 0-day kernel test infrastructure reported a use of uninitialized variable warning for local_table due to the fact that the local and main allocations had been swapped from the original setup. This change corrects that by making it so that we free the main table if the local table allocation fails. Fixes: 0ddcf43d ("ipv4: FIB Local/MAIN table collapse") Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sabrina Dubroca 提交于
Move rtnl_lock() before the call to fib4_rules_exit so that fib_table_flush_external is called under RTNL. Fixes: 104616e7 ("switchdev: don't support custom ip rules, for now") Signed-off-by: NSabrina Dubroca <sd@queasysnail.net> Acked-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Reviewed-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Robert Shearman 提交于
CONFIG_MPLS=m doesn't result in a kernel module being built because it applies to the net/mpls directory, rather than to .o files. So revert the MPLS menuitem to being a boolean and make MPLS_GSO and MPLS_ROUTING tristates to allow mpls_gso and mpls_router modules to be produced as desired. Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NRobert Shearman <rshearma@brocade.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shaohui Xie 提交于
FSL_PQ_MDIO and FSL_XGMAC_MDIO are not really depend on FSL_SOC, they can build on non-PPC platforms. Signed-off-by: NShaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch adds a rehash function that supports the use of any hash function for the new table. This is needed to support changing the random seed value during the lifetime of the hash table. However for now the random seed value is still constant and the rehash function is simply used to replace the existing expand/shrink functions. [ ASSERT_BUCKET_LOCK() and thus debug_dump_table() + debug_dump_buckets() are not longer used, so delete them entirely. -DaveM ] Signed-off-by: NHerbert Xu <herbert.xu@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Currently hash_rnd is a parameter that users can set. However, no existing users set this parameter. It is also something that people are unlikely to want to set directly since it's just a random number. In preparation for allowing the reseeding/rehashing of rhashtable, this patch moves hash_rnd into bucket_table so that it's now an internal state rather than a parameter. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Acked-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch is meant to collapse local and main into one by converting tb_data from an array to a pointer. Doing this allows us to point the local table into the main while maintaining the same variables in the table. As such the tb_data was converted from an array to a pointer, and a new array called data is added in order to still provide an object for tb_data to point to. In order to track the origin of the fib aliases a tb_id value was added in a hole that existed on 64b systems. Using this we can also reverse the merge in the event that custom FIB rules are enabled. With this patch I am seeing an improvement of 20ns to 30ns for routing lookups as long as custom rules are not enabled, with custom rules enabled we fall back to split tables and the original behavior. Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 3月, 2015 8 次提交
-
-
由 Jon Paul Maloy 提交于
commit afaa3f65 (tipc: purge links when bearer is disabled) was an attempt to resolve a problem that turned out to have a more profound reason. When we disable a bearer, we delete all its pertaining links if there is no other bearer to perform failover to, or if the module is shutting down. In case there are dual bearers, we wait with deleting links until the failover procedure is finished. However, this misses the case when a link on the removed bearer was already down, so that there will be no failover procedure to finish the link delete. This causes confusion if a new bearer is added to replace the removed one, and also entails a small memory leak. This commit takes the current state of the link into account when deciding when to delete it, and also reverses the above-mentioned commit. Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
If the inflate call failed it would return NULL. As a result tp would be set to NULL and cause use to trigger a NULL pointer dereference in should_halve if the inflate failed on the first attempt. In order to prevent this we should decrement max_work before we actually attempt to inflate as this will force us to exit before attempting to halve a node we should have inflated. In order to keep things symmetric between inflate and halve I went ahead and also moved the decrement of max_work for the halve case as well so we take care of that before we actually attempt to halve the tnode. Fixes: 88bae714 ("fib_trie: Add key vector to root, return parent key_vector in resize") Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Rothwell 提交于
The code removed by commit 421d9df0 ("net/macb: merge at91_ether driver into macb driver") should be removed in the merge resolution as well. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
In the case of a trie that had no tnodes with a key of 0 the initial look-up would fail resulting in an out-of-bounds cindex on the first tnode. This resulted in an entire trie being skipped. In order resolve this I have updated the cindex logic in the initial look-up so that if the key is zero we will always traverse the child zero path. Fixes: 8be33e95 ("fib_trie: Fib walk rcu should take a tnode and key instead of a trie and a leaf") Reported-by: NSabrina Dubroca <sd@queasysnail.net> Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com> Tested-by: NSabrina Dubroca <sd@queasysnail.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Eric Dumazet says: ==================== inet_diag: cleanups and improvements Before changing way request socks are dumped, let's clean up this code a bit. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
diag dumpers should not modify the request. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Remove all inline keywords, add some const, and cleanup style. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
sock_diag_check_cookie() second parameter is constant Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-