- 01 4月, 2009 1 次提交
-
-
由 Davide Rizzo 提交于
An hwmon driver for the National Semiconductor LM95241 triple temperature sensors chip Signed-off-by: NDavide Rizzo <elpa-rizzo@gmail.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 31 3月, 2009 4 次提交
-
-
由 Hans de Goede 提交于
Add support for the Hades to the FSC hwmon driver. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Hans de Goede 提交于
Many thanks to Fujitsu Siemens Computers for providing docs and a machine to test the driver on. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Directory drivers/i2c/chips is going away, so drivers there must find new homes. For the pcf8591 driver, the best choice seems to be the hwmon subsystem. While the Philips PCF8591 device isn't a typical hardware monitoring chip, its DAC interface is compatible with the hwmon one, so it fits somewhat. If a better subsystem is ever created for ADC/DAC chips, the driver could be moved there. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Aurelien Jarno <aurelien@aurel32.net>
-
由 Gong Jun 提交于
Add initial support for the Nuvoton W83667HG chip to the w83627ehf driver. It has been tested on ASUS P5QL PRO by Gong Jun. At the moment there is still a usability issue which is that only in6 or temp3 can be present on the W83667HG, so the driver shouldn't expose both. This will be addressed later. Signed-off-by: NGong Jun <JGong@nuvoton.com> Acked-by: NDavid Hubbard <david.c.hubbard@gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 12 3月, 2009 1 次提交
-
-
由 Darrick J. Wong 提交于
Update documentation to prevent further confusion/duplication. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 16 1月, 2009 2 次提交
-
-
由 Eric Piel 提交于
Move the second part of the HP laptop disk protection functionality (a red led) to the same driver. From a purely Linux developer's point of view, the led and the accelerometer have nothing related. However, they correspond to the same ACPI functionality, and so will always be used together, moreover as they share the same ACPI PNP alias, there is no other simple to allow to have same loaded at the same time if they are not in the same module. Also make it requires the led class to compile and update the Kconfig text. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NEric Piel <eric.piel@tremplin-utc.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jordan Crouse 提交于
Hwmon driver for the ADT7475 chip. Signed-off-by: NJordan Crouse <jordan.crouse@amd.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 07 1月, 2009 6 次提交
-
-
由 Manuel Lauss 提交于
The Texas Instruments TMP121 is a SPI temperature sensor very similar to the LM70, with slightly higher resolution. This patch extends the LM70 driver to support the TMP121. The TMP123 differs in pin assign- ment. Signed-off-by: NManuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Hans de Goede 提交于
Now that the new merged fschmd driver has gained support for the watchdog integrated into these IC's, there is no more reason to keep the old fscher and fscpos drivers around, so mark them as deprecated. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Hans de Goede 提交于
This patch adds support for the watchdog part found in _all_ supported FSC sensor chips. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean-Marc Spaggiari 提交于
Allow it87.c to handle IT8720 chipset like IT8718 in order to retrieve voltage, temperatures and fans speed from sensors tools. Also updating the related documentation. Signed-off-by: NJean-Marc Spaggiari <jean-marc@spaggiari.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Ira Snyder 提交于
Add Linux support for the Linear Technology LTC4245 Multiple Supply Hot Swap controller I2C monitoring interface. Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Hans de Goede 提交于
Add some documentation about the f71882fg driver, and update the Kconfig documentation to report the new supported models. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 13 11月, 2008 2 次提交
-
-
由 Darrick J. Wong 提交于
New driver to play with. As Jean mentioned a couple of years ago, this chip is a beast with odd combinations of 8 fans, 4 temperatures, and 13 voltage sensors. This driver has been tested on an IntelliStation Z30. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pavel Machek 提交于
This adds a driver to the accelerometer sensor found in several HP laptops (under the commercial names of "HP Mobile Data Protection System 3D" and "HP 3D driveguard"). It tries to have more or less the same interfaces as the hdaps and other accelerometer drivers: in sysfs and as a joystick. This driver was first written by Yan Burman. Eric Piel has updated it and slimed it up (including the removal of an interface to access to the free-fall feature of the sensor because it is not reliable enough for now). Pavel Machek removed few more features and switched locking from semaphore to mutex. Several people have contributed to the database of the axes. [eric.piel@tremplin-utc.net: LIS3LV02D: Conform to the new ACPI API] Signed-off-by: NEric Piel <eric.piel@tremplin-utc.net> Signed-off-by: NYan Burman <burman.yan@gmail.com> Signed-off-by: NPavel Machek <pavel@suse.cz> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Signed-off-by: NEric Piel <eric.piel@tremplin-utc.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 10月, 2008 2 次提交
-
-
由 Ben Hutchings 提交于
These Maxim chips are similar to MAX6657 but use unsigned temperature values to allow for readings up to 145 degrees. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Nate Case 提交于
Support ADT7461 in extended temperature range mode, which will change the range of readings from 0..127 to -64..191 degC. Adjust the register conversion functions accordingly. Signed-off-by: NNate Case <ncase@xes-inc.com> Signed-off-by: NJean Delvare <khali@linux-fr.org> Tested-by: NMartyn Welch <martyn.welch@gefanuc.com>
-
- 24 9月, 2008 1 次提交
-
-
由 Eric Miao 提交于
Driver based on corgi_ssp.c and sharpsl_pm.c, previously done by Richard Purdie and many others. Now changed to generic HWMON device and expose all the ADC input value through sysfs. Signed-off-by: NEric Miao <eric.miao@marvell.com> Acked-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 25 8月, 2008 1 次提交
-
-
由 David S. Miller 提交于
This is a PIC16F747 based controller that monitors and consolidates the hardware access to various fan and temperature values reported by adr7462 and similar devices behind an I2C bus. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 8月, 2008 1 次提交
-
-
由 Marc Pignat 提交于
SPI driver for analog to digital converters national semiconductor ADC081S101, ADC124S501, ... Code for 8 channels by Tobias Himmer. This driver adds support for National Semiconductor ADC<bb><c>S<sss> chip family, where: * bb is the resolution in number of bits (8, 10, 12) * c is the number of channels (1, 2, 4, 8) * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 kSPS and 101 for 1 MSPS) [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NMarc Pignat <marc.pignat@hevs.ch> Cc: Tobias Himmer <tobias@himmer-online.de> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 8月, 2008 3 次提交
-
-
由 Sean MacLennan 提交于
Driver for the Analog Devices AD7414 temperature monitoring chip. Signed-off-by: NSean MacLennan <smaclennan@pikatech.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Grant Coady 提交于
The adm9240 driver is in the kernel for three years now, time to remove the EXPERIMENTAL dependency. Signed-off-by: NGrant Coady <gcoady.lk@gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Juerg Haefliger 提交于
Add support for the SCH5027. The differences to the DME1737 are: - No support for programmable temp offsets - In auto mode, PWM outputs stay on min value if temp goes below low threshold and can't be programmed to fully turn off - Different voltage scaling - No VID input Signed-off-by: NJuerg Haefliger <juergh@gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 01 8月, 2008 2 次提交
-
-
由 David Brownell 提交于
More LM75 updates: - Teach the LM75 driver to use new-style driver binding: * Create a second driver struct, using new-style driver binding methods cribbed from the legacy code. * Add a MODULE_DEVICE_TABLE (for "newER-style binding") * The legacy probe logic delegates its work to this new code. * The legacy driver now uses the name "lm75_legacy". - More careful initialization. Chips are put into 9-bit mode so the current interconversion routines will never fail. - Save the original chip configuration, and restore it on exit. (Among other things, this normally turns off the mode where the chip is constantly sampling ... and thus saves power.) So the new-style code should catch all chips that boards declare, while the legacy code catches others. This particular coexistence strategy may need some work yet ... legacy modes might best be set up explicitly by some tool not unlike "sensors-detect". (Or else completely eradicated...) Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Acked-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 David Brownell 提交于
Minor cleanup and reorg of the lm75 code. - Kconfig provides a larger list of lm75-compatible chips - A top comment now says what the driver does (!) ... as in, just what sort of sensor is this?? - Section comments now delineate the various sections of the driver: hwmon attributes, driver binding, register access, module glue. One driver binding function moved out of the attribute section, as did the driver struct itself. - Minor tweaks to legacy probe logic: correct a comment, and remove a pointless variable. - Whitespace, linelength, and comment fixes. This patch should include no functional changes. It's preparation for adding new-style (driver model) I2C driver binding. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Acked-by: NJean Delvare <khali@linux-fr.org> Acked-by: NLaurent Pinchart <laurentp@cse-semaphore.com> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
- 25 5月, 2008 1 次提交
-
-
由 Darrick J. Wong 提交于
This driver reads IBM Active Energy Manager energy/temperature/power sensors on IBM System X hardware. [akpm@linux-foundation.org: fix printk warnings] Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Corey Minyard <minyard@acm.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 3月, 2008 1 次提交
-
-
由 Darrick J. Wong 提交于
Enhanced the list of supported machines. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 19 2月, 2008 1 次提交
-
-
由 Darrick J. Wong 提交于
This driver reports voltage, temperature and fan sensor readings on an ADT7473 chip. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
- 08 2月, 2008 4 次提交
-
-
由 Steve Hardy 提交于
Signed-off-by: NSteve Hardy <steve@linuxrealtime.co.uk> Acked-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 Jean Delvare 提交于
The W83627HF hardware monitoring features are supported by the w83627hf driver for several years now. Support by the w83781d has been advertised as deprecated 6 months ago, it's about time to see it go. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 Jean Delvare 提交于
It happens that the Analog Devices ADM1024 is fully compatible with the National Semiconductor LM87, so support for the former can easily be added to the lm87 driver. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 Kevin Lo 提交于
Signed-off-by: NKevin Lo <kevlo@kevlo.org> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
- 08 11月, 2007 1 次提交
-
-
由 Darrick J. Wong 提交于
New driver to read FB-DIMM temperature sensors on systems with the Intel 5000 series chipsets. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
- 13 10月, 2007 1 次提交
-
-
由 Dmitry Torokhov 提交于
Switch to using input-polldev skeleton instead of implementing polling loop by itself. This also fixes problem with trylock on a mutex in atomic context. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 11 10月, 2007 2 次提交
-
-
由 Hans de Goede 提交于
This patch adds a new merged driver for FSC sensor chips, it merges the fscher and fscpos drivers and adds support for the FSC Scylla, Heracles and Heimdall chips. Signed-off-by: NHans de Goede <j.w.r.degoede@hhs.nl> Acked-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 Juerg Haefliger 提交于
This patch adds support for the SMSC SCH3112, SCH3114, and SCH3116 Super-I/O chips. These chips feature identical hardware monitoring capabilites with the expection that some of the fan inputs and pmw outputs don't exist. The hardware monitoring features of the SCH311x chips can only be accessed via the ISA bus. The driver therefore registers as a platform driver, if such a chip is detected. Signed-off-by: Juerg Haefliger <juergh at gmail.com> Acked-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
- 10 10月, 2007 3 次提交
-
-
由 Darrick J. Wong 提交于
Add a driver to export IBM PowerExecutive power meter sensors. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 Jean Delvare 提交于
* Drop HWMON from the dependency list of ABITUGURU3 and LM93: this is now handled at menu level. * Make the Abit, Asus and FSC chip drivers depend on X86. These are custom chips which can only be found on their respective manufacturer's systems, and these manufacturers only do x86 hardware AFAIK. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NHans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 Riku Voipio 提交于
Add support for Fintek F75375S/SP and F75373. Signed-off-by: NRiku Voipio <riku.voipio@movial.fi> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-