- 12 3月, 2015 4 次提交
-
-
由 Arnd Bergmann 提交于
Merge tag 'renesas-dt2-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Pull "Second Round of Renesas ARM Based SoC DT Updates for v4.1" from Simon Horman: * ape6evm board - Configure GPIO keys as wake-up source - Enable pull-up for GPIO switches - Correct polarity of LEDs * r8a7791 SoC - Correct IPMMU-GP clock to device tree * r8a7794 SoC - Correct ethernet controller PHY IRQ * lager, koelsch and marzen boards - Add DU external pixel clock to DT * lager board - Add HDMI output support to DT * r8a7791 and r8a7790 SoCs - Tidy up SDHI register size in DT - Reference DMA channels for SDHI in DT * tag 'renesas-dt2-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: ape6evm dts: Configure the custom switch as wake-up source ARM: shmobile: ape6evm dts: Enable pull-up for GPIO switches ARM: shmobile: r8a7791: Fix IPMMU-GP clock to device tree ARM: shmobile: r8a7794: alt: Fix ethernet controller PHY IRQ line ARM: shmobile: lager: Add DU external pixel clocks to DT ARM: shmobile: koelsch: Add DU external pixel clocks to DT ARM: shmobile: marzen: Add DU external pixel clock to DT ARM: shmobile: ape6evm dts: Fix polarity of LEDs ARM: shmobile: lager: Add DU HDMI output support ARM: shmobile: r8a7791: Fix HSUSB clock to hp_clk from mp_clk ARM: shmobile: r8a7790: Fix HSUSB clock to hp_clk from mp_clk ARM: shmobile: r8a7791: tidyup SDHI register size on DTSI ARM: shmobile: r8a7790: tidyup SDHI register size on DTSI ARM: shmobile: r8a7791: Reference DMA channels in SDHI DT nodes ARM: shmobile: r8a7790: Reference DMA channels in SDHI DT nodes
-
git://git.infradead.org/linux-mvebu由 Arnd Bergmann 提交于
Pull "mvebu dt changes for v4.1 (part #1)" from Gregory CLEMENT: - fix SDHCI nodes on Armada 38x - add Linksys WRT1900AC (Mamba) support (including the Ethernet switch) - add several fixes and improvement for dove - enable GPIO fan alarm support for 2Big Network v2 - add several fixes about unit address - add support for Armada 39x SoC and board * tag 'mvebu-dt-4.1' of git://git.infradead.org/linux-mvebu: ARM: mvebu: add Device Tree files for Armada 39x SoC and board ARM: mvebu: fix unit address of MPIC nodes ARM: mvebu: use stdout-path in all armada-*.dts ARM: mvebu: add serial port aliases on Armada 370/375/38x/XP ARM: mvebu: remove aliases for Ethernet devices on Armada 370/375/38x/XP ARM: mvebu: add UART labels to Armada 375 ARM: mvebu: add missing UART labels on Armada 38x ARM: mvebu: fix usb@ unit address on Armada 38x to match register address ARM: mvebu: a385-db-ap: Enable the NAND ARM: ARMADA XP: WRT1900AC: Add support for the Ethernet switch ARM: Kirkwood: enable GPIO fan alarm support for 2Big Network v2 ARM: mvebu: Fix MPIC unit address ARM: dts: dove: Add some more common pinctrl settings ARM: dts: dove: Add node labels for PCIe ports 0 and 1 ARM: dts: dove: Always include gpio and interrupt-controller headers ARM: dts: dove: Fix uart[23] reg property ARM: mvebu: add Linksys WRT1900AC (Mamba) support ARM: mvebu: Add Device Tree description of SDHCI for Armada 388 RD ARM: mvebu: Update the SDHCI node on Armada 38x ARM: mvebu: Use macros for interrupt flags on Armada 38x sdhci node
-
http://github.com/broadcom/stblinux由 Arnd Bergmann 提交于
Pull "Broadcom Device Tree changes for 4.1 #1" from Florian Fainelli: This pull request contains the following Broadcom SoCs Device Tree changes: - Jonathan adds support for the Broadcom Cygnus BCM958305K board - Rafal adds support for Netgear R8000 and fixes the default for power LEDs on Netgear R6250 * tag 'arm-soc/for-4.1/devicetree' of http://github.com/broadcom/stblinux: ARM: BCM5301X: Fix default state of power LEDs on Netgear R6250 ARM: BCM5301X: Add DT for Netgear R8000 ARM: dts: Enable Broadcom Cygnus BCM958305K
-
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91由 Arnd Bergmann 提交于
Pull "First batch of DT changes for 4.1" into next/dt: - at91sam9x5 & EK board: ISI and camera sensors - at91sam9n12 & EK board: USB gadget nodes - sama5d3: typos, gpio-keys on Xplained board - sama5d4: i2c, leds, audio, ISI, crypto, pwm missing nodes - new sama5d4 xplained board * tag 'at91-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: (31 commits) ARM: at91/dt: sama5d4: add ISI dt support ARM: at91/dt: sama5d4: add pwm0 device node ARM: at91/dt: sama5d4: add aes, sha and tdes nodes ARM: at91: dt: sama5d4ek: enable audio ARM: at91: dt: sama5d4ek: add and enable wm8904 ARM: at91: dt: sama5d4ek: enable ssc0 ARM: at91: dt: sama5d4: add ssc nodes ARM: at91/dt: sama5d4 xplained: add i2c0 ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board ARM: at91/dt: sama5d4: add #{address, size}_cells properties for macb0 ARM: at91/dt: sama5d4ek: add leds in DT node ARM: at91/dt: add i2c1 declaration to sama5d4 ARM: at91/dt: gpio-keys: address-cells and size-cells properties are not needed ARM: at91/dt: at91-sama5d3_xplained: add gpio-key pinctrl property ARM: at91/dt/trivial: correct file headers for SAMA5D3 SoC peripherals ARM: at91/dt: at91sam9n12ek: enable udp ARM: at91/dt: at91sam9n12: add udp device node ARM: at91: at91sam9g25ek/dts: enable ISI and ov2640 ARM: at91: at91sam9x5ek/dts: add ov2640 support ARM: at91: at91sam9x5/dts: add ISI dt support, include isi node, pinctrls ...
-
- 07 3月, 2015 4 次提交
-
-
由 Rafał Miłecki 提交于
We want green LED to be enabled by default. Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
-
由 Rafał Miłecki 提交于
Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Reported-by: NIan Kent <raven@themaw.net> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
由 Geert Uytterhoeven 提交于
The switches on r8a73a4/ape6evm do not have pull-up registers. The schematics say: "Need to use APE6 internal PullUp", hence enable pull-up using pinctrl. Without this, the switches don't really work, as the GPIO inputs are more likely to pick up ghost signals through capacitive coupling than actual keypresses. Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
-
- 05 3月, 2015 23 次提交
-
-
由 Daniel Tang 提交于
Signed-off-by: NDaniel Tang <dt.tangr@gmail.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
https://github.com/carlocaione/linux-meson由 Arnd Bergmann 提交于
Pull "meson DTS changes" from Carlo Caione: - New DTS for MINIX NEO-X8 - Add DTS support for SPIFC, Ethernet controller and pinctrl * tag 'for-v4.0-rc/meson-dts' of https://github.com/carlocaione/linux-meson: ARM: dts: meson: add DTS file for MINIX NEO-X8 ARM: dts: meson8: add pinctrl node ARM: dts: meson: enable Ethernet controller ARM: dts: meson: add node for SPIFC
-
由 Arnd Bergmann 提交于
Merge tag 'renesas-dt-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Pull "Renesas ARM Based SoC DT Updates for v4.1" from Simon Horman: * Increase hardware coverage of DT for various SoCs * Add PFC information for emev2 SoC * Remap entire APMU region for r8a7791 and r8a7790 SoCs * Declare the full 512 MiB of RAM for kzm9g board * Add selectable sources to DIV6 clocks to sh73a0 SoC * Add missing INTCA0 clock for irqpin module on sh73a0 SoC * Set control-parent for all irqpin node on sh73a0 SoC * tag 'renesas-dt-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (32 commits) ARM: shmobile: r8a7794: add SDHI DT support ARM: shmobile: r8a7790: add ADSP clocks ARM: shmobile: r8a7791: add ADSP clocks ARM: shmobile: henninger: add CAN0 DT support ARM: shmobile: r8a7791: add CAN DT support ARM: shmobile: r8a7791: add CAN clocks ARM: shmobile: r8a7790: add CAN DT support ARM: shmobile: r8a7790: add CAN clocks ARM: shmobile: emev2-kzm9d dts: Add PFC information for uart1 ARM: shmobile: emev2 dtsi: Add PFC information ARM: shmobile: r8a7791: smp: remap whole apmu region ARM: shmobile: r8a7790: smp: remap whole apmu region ARM: shmobile: koelsch: Add DU HDMI output support ARM: shmobile: r8a7791: Correct SDHI clock labels and output-names ARM: shmobile: r8a7794: Correct SDHI clock base address, labels and output-names ARM: shmobile: r8a7794: alt: Enable ethernet controller ARM: shmobile: r8a7794: Add ethernet controller to device tree ARM: shmobile: r8a7794: Add IPMMU DT nodes ARM: shmobile: r8a7791: Add IPMMU DT nodes ARM: shmobile: r8a7790: Add IPMMU DT nodes ...
-
由 Josh Wu 提交于
Add ISI dt node and pinctrl settings in sama5d4.dtsi. Signed-off-by: NJosh Wu <josh.wu@atmel.com> [nicolas.ferre@atmel.com: sort nodes in order. remove useless comments] Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Bo Shen 提交于
Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Leilei Zhao 提交于
Signed-off-by: NLeilei Zhao <leilei.zhao@atmel.com> Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Bo Shen 提交于
Enable audio support for sama5d4ek board. Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Bo Shen 提交于
Add wm8904 codec node and enable it. Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Bo Shen 提交于
Enable SSC0 node, which will be used for audio. Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Bo Shen 提交于
Add SSC 0 and 1 nodes. Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Nicolas Ferre 提交于
Add i2c0 aka twi0 on sama5d4 xplained board. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Josh Wu 提交于
Add at91 sama5d4 xplained board support. Signed-off-by: NJosh Wu <josh.wu@atmel.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Josh Wu 提交于
macb0 DT node can have phy child nodes, so add the #{address, size}_cells for macb0 node. Signed-off-by: NJosh Wu <josh.wu@atmel.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Josh Wu 提交于
Add the leds DT node in the dts file. In the leds, d10 is set as heartbeat led. Signed-off-by: NJosh Wu <josh.wu@atmel.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Philip Attfield 提交于
Add alias, node declaration and pinctrl for i2c1 (aka: twi1). Signed-off-by: NPhilip Attfield <phil.attfield@seqlabs.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Nicolas Ferre 提交于
Gpio-keys nodes are not using the "reg" property in their sub nodes. So, there is no need to define #address-cells and #size-cells properties in gpio-keys nodes: we remove them in these new boards. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Wenyou Yang 提交于
Signed-off-by: NWenyou Yang <wenyou.yang@atmel.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Nicolas Ferre 提交于
File name had at91 prefix, which is not the case anymore for SAMA5D3. AT91SAM9x5 was mentioned instead of SAMA5D3 SoC. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Bo Shen 提交于
Enable usb device port on at91sam9n12ek board. Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Bo Shen 提交于
Add usb device node for at91sam9n12. Signed-off-by: NBo Shen <voice.shen@atmel.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Josh Wu 提交于
Enable ISI and ov2640 for at91sam9g25ek board. Meantime, we need to disable the mmc1 and spi0 as they have pin conflict with ISI. Signed-off-by: NJosh Wu <josh.wu@atmel.com> Acked-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Josh Wu 提交于
Add the camera sensor ov2640 dt support. And connect sensor to isi node as well. Signed-off-by: NJosh Wu <josh.wu@atmel.com> Acked-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Josh Wu 提交于
Add a new file: at91sam9x5_isi.dtsi, which includes ISI node and pinctrls. Signed-off-by: NJosh Wu <josh.wu@atmel.com> Acked-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 04 3月, 2015 9 次提交
-
-
由 Thomas Petazzoni 提交于
This commit adds the Device Tree files for the Armada 39x family of processors, as well as one Armada 398 Development Board. Like for other Marvell EBU families, a common armada-39x.dtsi contains the description of the common features of all Armada 39x SoCs, while armada-390.dtsi and armada-398.dtsi respectively describe the specificities of those SoCs. Finally, an armada-398-db.dts file is added to describe the Armada 398 Development Board itself. So far, the following features are supported: * SMP: dual Cortex-A9 * Basic ARM IPs: SCU, timer, GIC, L2 cache * Basic Marvell IPs: pin-muxing, clocks, system controller, MBus controller, MPIC interrupt controller, timer, CPU reset for SMP, PMSU. * I2C * SPI * SDHCI * XOR * NAND * UART * PCIe Additional features will be supported in the future. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
-
由 Nicolas Ferre 提交于
First fixes batch for AT91 on 4.0: - PM slowclock fixes for DDR and timeouts - fix some DT entries - little defconfig updates - the removal of a harmful watchdog option + its detailed documentation
-
由 Thomas Petazzoni 提交于
The Device Tree nodes describing the MPIC nodes on Armada 370, 375, 38x and XP had a unit address that did not match the first reg property, as suggested by the ePAPR. This commit fixes that. [gregory.clement@free-electrons.com: removed the armada-38x part, as it was already applied by a previous patch] Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
-
由 Thomas Petazzoni 提交于
This commit adds the stdout-path property in /chosen for all Armada boards that were not yet carrying this property, and gets rid of /chosen/bootargs which becomes unneeded: earlyprintk should not be used by default, and the console= parameter is replaced by the /chosen/stdout-path property. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
-
由 Thomas Petazzoni 提交于
This commit adds 'serialX' aliases for the various serial ports on Armada 370, 375, 38x and XP platforms. It will allow the usage of the stdout-path property. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
-
由 Thomas Petazzoni 提交于
Having aliases for Ethernet devices is useless, since the networking subsystem unfortunately doesn't care about aliases to name network interfaces. Note that the 'aliases' nodes in armada-370-xp.dtsi and armada-xp.dtsi become empty, but that we keep it as is since a followup patch will re-add some aliases to it. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
-
由 Thomas Petazzoni 提交于
This commit adds the standard uart0 and uart1 DT labels to the Device Tree description of the Marvell Armada 375 SoC. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
-
由 Thomas Petazzoni 提交于
The Armada 38x had a label for UART0, but not UART1. This commit fixes that. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: NGregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
-
由 Thomas Petazzoni 提交于
On Marvell Armada 38x, the USB2 controller registers are at 0x58000, so the corresponding Device Tree node should have a unit address of 58000, and not 50000. We were using 50000 due to an incorrect copy/pastebin of Armada 370/XP code. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: NGregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
-