When PE is created, its primary bus is cached to pe->bus. At later
point, the cached primary bus is returned from eeh_pe_bus_get().
However, we could get stale cached primary bus and run into kernel
crash in one case: full hotplug as part of fenced PHB error recovery
releases all PCI busses under the PHB at unplugging time and recreate
them at plugging time. pe->bus is still dereferencing the PCI bus
that was released.

This adds another PE flag (EEH_PE_PRI_BUS) to represent the validity
of pe->bus. pe->bus is updated when its first child EEH device is
online and the flag is set. Before unplugging in full hotplug for
error recovery, the flag is cleared.

Fixes: 8cdb2833 ("powerpc/eeh: Trace PCI bus from PE")
Cc: stable@vger.kernel.org #v3.11+
Reported-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Reported-by: NPradipta Ghosh <pradghos@in.ibm.com>
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Tested-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

If a cpu is hotplugged while the hcall trace points are active, it's
possible to hit a warning from RCU due to the trace points calling into
RCU from an offline cpu, eg:

  RCU used illegally from offline CPU!
  rcu_scheduler_active = 1, debug_locks = 1

Make the hypervisor tracepoints conditional by using
TRACE_EVENT_FN_COND.
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NDenis Kirjanov <kda@linux-powerpc.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Since binutils 2.26 BFD is doing suffix merging on STRTAB sections.  But
dedotify modifies the symbol names in place, which can also modify
unrelated symbols with a name that matches a suffix of a dotted name.  To
remove the leading dot of a symbol name we can just increment the pointer
into the STRTAB section instead.

Backport to all stables to avoid breakage when people update their
binutils - mpe.

Cc: stable@vger.kernel.org
Signed-off-by: NAndreas Schwab <schwab@linux-m68k.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In file included from mm/vmscan.c:54:0:
include/linux/swapops.h: In function ‘pte_to_swp_entry’:
include/linux/swapops.h:69:2: error: implicit declaration of function ‘pte_swp_soft_dirty’ [-Werror=implicit-function-declaration]
  if (pte_swp_soft_dirty(pte))
  ^
include/linux/swapops.h:70:3: error: implicit declaration of function ‘pte_swp_clear_soft_dirty’ [-Werror=implicit-function-declaration]
   pte = pte_swp_clear_soft_dirty(pte);

We support soft dirty tracking only with book3s 64 for now.
So change the Kconfig dependency accordingly. Also CHECKPOINT_RESTORE
feature is not really dependent on SOFT_DIRTY. We track the dependency
between MEM_SOFT_DIRTY and ARCH_SOFT_DIRTY through headers

Fixes: 7207f436 ("powerpc/mm: Add page soft dirty tracking")
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This was wrongly updated by commit 7aa9a23c ("powerpc, thp: remove
infrastructure for handling splitting PMDs") during the last merge
window. Fix it up.

This could lead to incorrect behaviour in THP and/or mprotect(), at a
minimum.

Fixes: 7aa9a23c ("powerpc, thp: remove infrastructure for handling splitting PMDs")
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Commit 7a786832 ("powerpc/perf: Add an explict flag indicating
presence of SLOT field") introduced the PPMU_HAS_SSLOT flag to remove
the assumption that MMCRA[SLOT] was present when PPMU_ALT_SIPR was not
set.

That commit's changelog also mentions that Power8 does not support
MMCRA[SLOT]. However when the Power8 PMU support was merged, it
errnoeously included the PPMU_HAS_SSLOT flag.

So remove PPMU_HAS_SSLOT from the Power8 flags.

mpe: On systems where MMCRA[SLOT] exists, the field occupies bits 37:39
(IBM numbering). On Power8 bit 37 is reserved, and 38:39 overlap with
the high bits of the Threshold Event Counter Mantissa. I am not aware of
any published events which use the threshold counting mechanism, which
would cause the mantissa bits to be set. So in practice this bug is
unlikely to trigger.

Fixes: e05b9b9e ("powerpc/perf: Power8 PMU support")
Signed-off-by: NMadhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In eeh_pe_loc_get(), the PE location code is retrieved from the
"ibm,loc-code" property of the device node for the bridge of the
PE's primary bus. It's not correct because the property indicates
the parent PE's location code.

This reads the correct PE location code from "ibm,io-base-loc-code"
or "ibm,slot-location-code" property of PE parent bus's device node.

Cc: stable@vger.kernel.org # v3.16+
Fixes: 357b2f3d ("powerpc/eeh: Dump PE location code")
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Tested-by: NRussell Currey <ruscur@russell.cc>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

With commit 90a545e9 (restrict /dev/mem to idle io memory ranges) mapping
rtas_rmo_buf from user space is failing. Hence we are not able to make
RTAS syscall.

This patch calls page_is_rtas_user_buf before calling iomem_is_exclusive
in  devmem_is_allowed(). This will allow user space to map rtas_rmo_buf
and we are able to make RTAS syscall.
Reported-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
CC: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NVasant Hegde <hegdevasant@linux.vnet.ibm.com>
Acked-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Commit d5d6a443 ("arch/powerpc/include/asm/pgtable-ppc64.h:
add pmd_[dirty|mkclean] for THP") added a new identical definition
of pmd_dirty(). Remove it again.

Cc: Minchan Kim <minchan@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

PowerPC64 uses the symbol .TOC. much as other targets use
_GLOBAL_OFFSET_TABLE_. It identifies the value of the GOT pointer (or in
powerpc parlance, the TOC pointer). Global offset tables are generally
local to an executable or shared library, or in the kernel, module. Thus
it does not make sense for a module to resolve a relocation against
.TOC. to the kernel's .TOC. value. A module has its own .TOC., and
indeed the powerpc64 module relocation processing ignores the kernel
value of .TOC. and instead calculates a module-local value.

This patch removes code involved in exporting the kernel .TOC., tweaks
modpost to ignore an undefined .TOC., and the module loader to twiddle
the section symbol so that .TOC. isn't seen as undefined.

Note that if the kernel was compiled with -msingle-pic-base then ELFv2
would not have function global entry code setting up r2. In that case
the module call stubs would need to be modified to set up r2 using the
kernel .TOC. value, requiring some of this code to be reinstated.

mpe: Furthermore a change in binutils master (not yet released) causes
the current way we handle the TOC to no longer work when building with
MODVERSIONS=y and RELOCATABLE=n. The symptom is that modules can not be
loaded due to there being no version found for TOC.

Cc: stable@vger.kernel.org # 3.16+
Signed-off-by: NAlan Modra <amodra@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Test runs on a ppc64 BE guest succeeded using modified fstests.

Also tested on ppc64 LE using a home made test - mpe.
Signed-off-by: NChandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Pull dmaengine fixes from Vinod Koul:
 "Here is my second pull request for this window:

  A few driver fixes have piled up and one missed rcar bindings patch
  which got somehow lost in for-linus branch so cherry-picked that one.

  Fixes are for dw, at_hdmac, edma"

* tag 'dmaengine-fix-4.5-rc1' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: rcar-dmac: Document SoC specific bindings
  dmaengine: at_xdmac: fix resume for cyclic transfers
  dmaengine: dw: fix cyclic transfer callbacks
  dmaengine: dw: fix cyclic transfer setup
  dmaengine: edma: Fix paRAM slot allocation for entry channel 0

Pull misc kbuild updates from Michal Marek:
 - Fix for make O=... perf-tar*
 - make tags revamp and fix for the fallout.  Patch for warnings about
   line breaks inside DEFINE_PER_CPU macros is pending
 - New coccinelle test

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  coccinelle: tests: unsigned value cannot be lesser than zero
  tags: Unify emacs and exuberant rules
  tags: Drop the _PE rule
  tags: Do not try to index defconfigs
  tags: Process Kconfig files in a single pass
  tags: Fix erroneous pattern match in a comment
  aic7xxx: Avoid name collision with <linux/list.h>
  tags: Treat header files as C code
  package Makefile: fix perf-tar targets when outdir is set
  scripts/tags.sh: Teach tags about more powerpc macros

Pull kconfig updates from Michal Marek:
 - Fix for make xconfig segfault
 - Handle long strings in config symbol values
 - Fix for mixing boolean and kconfig ternary type

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kconfig: fix qconf segfault by deleting heap objects
  kconfig: return 'false' instead of 'no' in bool function
  kconfig: allow kconfig to handle longer path names

Pull kbuild updates from Michal Marek:
 - Make <modname>-m in makefiles work like <modname>-y and fix the
   fallout
 - Minor genksyms fix
 - Fix race with make -j install modules_install
 - Move -Wsign-compare from make W=1 to W=2
 - Other minor fixes

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: Demote 'sign-compare' warning to W=2
  Makefile: revert "Makefile: Document ability to make file.lst and file.S" partially
  kbuild: Do not run modules_install and install in paralel
  genksyms: Handle string literals with spaces in reference files
  fixdep: constify strrcmp arguments
  ath10k: Fix build with CONFIG_THERMAL=m
  Revert "drm: Hack around CONFIG_AGP=m build failures"
  kbuild: Allow to specify composite modules with modname-m
  staging/ad7606: Actually build the interface modules

Mark the FRV architecture orphaned in the MAINTAINERS file.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update the mailing list used for development of support for
Renesas SoCs and related drivers.

Up until now the linux-sh mailing list has been used, however,
Renesas SoCs are now much wider than the SH architecture and there
is some desire from some for the linux-sh list to refocus on
discussion of the work on the SH architecture.
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Acked-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: NMagnus Damm <damm@opensource.se>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NRich Felker <dalias@libc.org>
Acked-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A newly added tracepoint in the hugepage code uses a variable in the
error handling that is not initialized at that point:

include/trace/events/huge_memory.h:81:230: error: 'isolated' may be used uninitialized in this function [-Werror=maybe-uninitialized]

The result is relatively harmless, as the trace data will in rare
cases contain incorrect data.

This works around the problem by adding an explicit initialization.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Fixes: 7d2eba05 ("mm: add tracepoint for scanning pages")
Reviewed-by: NEbru Akagunduz <ebru.akagunduz@gmail.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge tag 'platform-drivers-x86-v4.5-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform driver updates from Darren Hart:
 "Add intel punit and telemetry driver for APL SoCs.
  Add intel-hid driver for various laptop hotkey support.
  Add asus-wireless radio control driver.
  Keyboard backlight support/improvements for ThinkPads, Vaio, and Toshiba.
  Several hotkey related fixes and improvements for dell and toshiba.
  Fix oops on dual GPU Macs in apple-gmux.
  A few new device IDs and quirks.
  Various minor config related build issues and cleanups.

  surface pro 4:
   - fix compare_const_fl.cocci warnings
   - Add support for Surface Pro 4 Buttons

  platform/x86:
   - Add Intel Telemetry Debugfs interfaces
   - Add Intel telemetry platform device
   - Add Intel telemetry platform driver
   - Add Intel Telemetry Core Driver
   - add NULL check for input parameters
   - add Intel P-Unit mailbox IPC driver
   - update acpi resource structure for Punit

  thinkpad_acpi:
   - Add support for keyboard backlight

  dell-wmi:
   - Process only one event on devices with interface version 0
   - Check if Dell WMI descriptor structure is valid
   - Improve unknown hotkey handling
   - Use a C99-style array for bios_to_linux_keycode

  tc1100-wmi:
   - fix build warning when CONFIG_PM not enabled

  asus-wireless:
   - Add ACPI HID ATK4001
   - Add Asus Wireless Radio Control driver

  asus-wmi:
   - drop to_platform_driver macro

  intel-hid:
   - new hid event driver for hotkeys

  sony-laptop:
   - Keyboard backlight control for some Vaio Fit models

  ideapad-laptop:
   - Add Lenovo ideapad Y700-17ISK to no_hw_rfkill dmi list

  apple-gmux:
   - Assign apple_gmux_data before registering

  toshiba_acpi:
   - Add rfkill dependency to ACPI_TOSHIBA entry
   - Fix keyboard backlight sysfs entries not being updated
   - Add WWAN RFKill support
   - Add support for WWAN devices
   - Fix blank screen at boot if transflective backlight is supported
   - Propagate the hotkey value via genetlink

  toshiba_bluetooth:
   - Add missing newline in toshiba_bluetooth_present function"

* tag 'platform-drivers-x86-v4.5-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (29 commits)
  surface pro 4: fix compare_const_fl.cocci warnings
  surface pro 4: Add support for Surface Pro 4 Buttons
  platform:x86: Add Intel Telemetry Debugfs interfaces
  platform:x86: Add Intel telemetry platform device
  platform:x86: Add Intel telemetry platform driver
  platform/x86: Add Intel Telemetry Core Driver
  intel_punit_ipc: add NULL check for input parameters
  thinkpad_acpi: Add support for keyboard backlight
  dell-wmi: Process only one event on devices with interface version 0
  dell-wmi: Check if Dell WMI descriptor structure is valid
  tc1100-wmi: fix build warning when CONFIG_PM not enabled
  asus-wireless: Add ACPI HID ATK4001
  platform/x86: Add Asus Wireless Radio Control driver
  asus-wmi: drop to_platform_driver macro
  intel-hid: new hid event driver for hotkeys
  Keyboard backlight control for some Vaio Fit models
  platform/x86: Add rfkill dependency to ACPI_TOSHIBA entry
  platform:x86: add Intel P-Unit mailbox IPC driver
  intel_pmc_ipc: update acpi resource structure for Punit
  ideapad-laptop: Add Lenovo ideapad Y700-17ISK to no_hw_rfkill dmi list
  ...

Move constants to the right of binary operators.

Generated by: scripts/coccinelle/misc/compare_const_fl.cocci

CC: Weng Xuetian <wengxt@gmail.com>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NJulia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Surface Pro 4 buttons are managed by a device with _HID "MSHW0040"
different from Surface Pro 3.

This commit adds MSHW0040 to id list to support the Surface Pro 4.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=109871Signed-off-by: NWeng Xuetian <wengxt@gmail.com>
Acked-by: NChen Yu <yu.c.chen@intel.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

This implements debugfs interfaces for reading the telemetry
samples from SSRAM and configuring firmware trace verbosity.
Interface created under /sys/kernel/debug/telemetry
soc_states: SoC Device and Low Power States
pss_info: Info from the Primary SubSystem
ioss_info: Info from IO SubSusytem
pss_trace_verbosity: Read/Modify PSS F/W trace verbosity
ioss_trace_verbosity: Read/Modify IOSS F/W trace verbosity.
Signed-off-by: NSouvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Telemetry Device is created by the pmc_ipc driver. Resources
are populated according SSRAM region as indicated by the BIOS tables.
Signed-off-by: NSouvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Telemetry platform driver implements the telemetry interfaces.
Currently it supports ApolloLake. It uses the PUNIT and PMC IPC
interfaces to configure the telemetry samples to read.
The samples are read from a Secure SRAM region.
Signed-off-by: NSouvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Intel PM Telemetry is a software mechanism via which various SoC
PM and performance related parameters like PM counters, firmware
trace verbosity, the status of different devices inside the SoC, etc.
can be monitored and analyzed. The different samples that may be
monitored can be configured at runtime via exported APIs.

This patch adds the telemetry core driver that implements basic
exported APIs.
Signed-off-by: NSouvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

intel_punit_ipc_command() maybe called when in or out
data pointers are NULL.
Signed-off-by: NQipeng Zha <qipeng.zha@intel.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

This patch adds support for controlling keyboard backlight via standard
linux led class interface (::kbd_backlight). It uses ACPI HKEY device with
MLCG and MLCS methods.
Signed-off-by: NPali Rohár <pali.rohar@gmail.com>
Tested-by: NFabio D'Urso <fabiodurso@hotmail.it>
Acked-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

BIOS/ACPI on devices with WMI interface version 0 does not clear buffer
before filling it. So next time when BIOS/ACPI send WMI event which is
smaller as previous then it contains garbage in buffer from previous event.

BIOS/ACPI on devices with WMI interface version 1 clears buffer and
sometimes send more events in buffer at one call.

Since commit 83fc44c3 ("dell-wmi: Update code for processing WMI
events") dell-wmi process all events in buffer (and not just first).

To prevent reading garbage from the buffer we process only the first
event on devices with WMI interface version 0.
Signed-off-by: NPali Rohár <pali.rohar@gmail.com>
Tested-by: NGabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

After examining existing DSDT ACPI tables of more laptops and looking
into Dell WMI document mentioned in ML dicussion archived at
http://www.spinics.net/lists/platform-driver-x86/msg07220.html we will
parse and check WMI descriptor if contains expected data. It is because
WMI descriptor contains interface version number and it is needed to
know in next commit.
Signed-off-by: NPali Rohár <pali.rohar@gmail.com>
Tested-by: NGabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Conditionally declare suspend_data on CONFIG_PM to avoid
the following warning when CONFIG_OM is not enabled:

drivers/platform/x86/tc1100-wmi.c:55:27: warning:
  'suspend_data' defined but not used [-Wunused-variable]
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

As reported in https://bugzilla.kernel.org/show_bug.cgi?id=98931#c22 in
the Asus UX31A the Asus Wireless Radio Control device (ASHS) uses the
HID "ATK4001".
Signed-off-by: NJoão Paulo Rechi Vita <jprvita@endlessm.com>
Reported-by: NTasev Nikola <tasev.stefanoska@skynet.be>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Some Asus notebooks like the Asus E202SA and the Asus X555UB have a
separate ACPI device for notifications from the airplane mode hotkey.
This device is called "Wireless Radio Control" in Asus websites and ASHS
in the DSDT, and its ACPI _HID is ATK4002 in the two models mentioned
above.

For these models, when the airplane mode hotkey (Fn+F2) is pressed, a
query 0x0B is started in the Embedded Controller, and all this query does
is a notify ASHS with the value 0x88 (for acpi_osi >= "Windows 2012"):

	Scope (_SB.PCI0.SBRG.EC0)
	{
		(...)
		Method (_Q0B, 0, NotSerialized)  // _Qxx: EC Query
		{
			If ((MSOS () >= OSW8))
			{
				Notify (ASHS, 0x88) // Device-Specific
			}
			Else
			{
				(...)
			}
		}
	}
Signed-off-by: NJoão Paulo Rechi Vita <jprvita@endlessm.com>
Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

to_platform_driver has been defined in platform_device.h, so drop
this repetitive macro in asus-wmi.c.
Signed-off-by: NGeliang Tang <geliangtang@163.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

This driver supports various HID events including hotkeys.
Dell XPS 13 9350 requires it for the wireless hotkey.
Signed-off-by: NAlex Hung <alex.hung@canonical.com>
Reviewed-and-tested-by: NAndy Lutomirski <luto@kernel.org>

[dvhart: Kconfig help typo fix and INPUT_SPARSEKMAP fix from Sedat Dilek]
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Pull security subsystem update from James Morris:
 "A CVE fix and a maintainers file update"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  KEYS: Fix keyring ref leak in join_session_keyring()
  Fix the MAINTAINERS record for the certs/ directory

This fixes CVE-2016-0728.

If a thread is asked to join as a session keyring the keyring that's already
set as its session, we leak a keyring reference.

This can be tested with the following program:

	#include <stddef.h>
	#include <stdio.h>
	#include <sys/types.h>
	#include <keyutils.h>

	int main(int argc, const char *argv[])
	{
		int i = 0;
		key_serial_t serial;

		serial = keyctl(KEYCTL_JOIN_SESSION_KEYRING,
				"leaked-keyring");
		if (serial < 0) {
			perror("keyctl");
			return -1;
		}

		if (keyctl(KEYCTL_SETPERM, serial,
			   KEY_POS_ALL | KEY_USR_ALL) < 0) {
			perror("keyctl");
			return -1;
		}

		for (i = 0; i < 100; i++) {
			serial = keyctl(KEYCTL_JOIN_SESSION_KEYRING,
					"leaked-keyring");
			if (serial < 0) {
				perror("keyctl");
				return -1;
			}
		}

		return 0;
	}

If, after the program has run, there something like the following line in
/proc/keys:

3f3d898f I--Q---   100 perm 3f3f0000     0     0 keyring   leaked-keyring: empty

with a usage count of 100 * the number of times the program has been run,
then the kernel is malfunctioning.  If leaked-keyring has zero usages or
has been garbage collected, then the problem is fixed.
Reported-by: NYevgeny Pats <yevgeny@perception-point.io>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NDon Zickus <dzickus@redhat.com>
Acked-by: NPrarit Bhargava <prarit@redhat.com>
Acked-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NJames Morris <james.l.morris@oracle.com>

SVF1521P6EW, SVF1521DCXW, SVF13N1L2ES and likely most SVF*.
do not expose separate timeout controls in auto mode.
Signed-off-by: NDominik Matta <dominik@matta.sk>
Signed-off-by: NMattia Dongili <malattia@linux.it>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Commit 2fdde834 ("toshiba_acpi: Add WWAN RFKill support") added
WWAN rfkill support to the driver, but the KConfig entry was not
updated to add the RFKill dependency, causing a broken build if
RFKill is not selected.

This patch adds the RFKILL dependency to the KConfig entry, fixing
the build issue.
Signed-off-by: NAzael Avalos <coproscefalo@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

This driver provides support for P-Unit mailbox IPC on Intel platforms.
The heart of the P-Unit is the Foxton microcontroller and its firmware,
which provide mailbox interface for power management usage.
Signed-off-by: NQipeng Zha <qipeng.zha@intel.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

BIOS restructure exported memory resources for Punit
in acpi table, So update resources for Punit.
Signed-off-by: NQipeng Zha <qipeng.zha@intel.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>