There's cards out there with completely messed up PCIROM images that have
a perfectly valid signature.. Sigh!
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

- moves out of nouveau_bios.c and demagics the logical state definitions
- simplifies chipset-specific driver interface
- makes most of gpio irq handling common, will use for nv4x hpd later
- api extended to allow both direct gpio access, and access using the
  logical function states
- api extended to allow for future use of gpio extender chips
- pre-nv50 was handled very badly, the main issue being that all GPIOs
  were being treated as output-only.
- fixes nvd0 so gpio changes actually stick, magic reg needs bashing
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The DCB table provided by the VBIOS on most MXM chips has a number of
entries which either need to be disabled, or modified according to the
MXM-SIS Output Device Descriptors.

The x86 vbios code usually takes care of this for us, however, with the
large number of laptops now with switchable graphics or optimus, a lot
of the time nouveau is responsible for POSTing the card instead - leaving
some fun situations like, plugging in a monitor and having nouveau decide
3 connectors actually just got plugged in..

No MXM-SIS fetching methods implemented yet.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Another case where we parsed vbios data to some structs, then again use
that info once to construct another set of data.  Skip the intermediate
step.

This is also slightly improved in that we can now use DCB 3.x connector
table info, which will allow NV4x to gain hotplug support, and to make
quirks for SPWG LVDS panels unnecessary.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Not much point parsing the vbios data into a struct which is only used once
to parse the data into another struct, go directly from vbios to
nouveau_i2c_chan.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This primary reason for this was mostly to avoid duplication of some of
this stuff by the MXM-SIS parser.  However, some other cleanups will also
follow this as a result.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Following to "drm/nv50/pm: s/unk05/vdec/", let's rename the PLL to PLL_VDEC

PLL names are purely indicative and are based on the most important engine
it clocks.
Signed-off-by: NMartin Peres <martin.peres@labri.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Reportedly this has been causing stability and corruption issues after
resuming from suspend for a few people.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Will need to be able to distinguish 2.0/2.1 from 3.0 soon.  Also, move
the vbios parsing to nouveau_dp where it belongs.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The caller is now responsible for parsing its own lists (or whatever) of
possible encoders.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Allows us to be lazy elsewhere...
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The connector table lies, the card has DVI-I not HDMI
Fixes bug https://bugs.freedesktop.org/show_bug.cgi?id=35675

v2: Mention the bugreport
Signed-off-by: NEmil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

There's lots of boards (all recent ones) that don't have this anymore, so
punt the message to debug loglevel.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

After looking at a number of different logs, it appears 0x41 likely
indicates the presense of an LVDS panel following the SPWG spec
(http://www.spwg.org/)
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The nv50 display isr bh needs to be converted to a tasklet, which means
we can't sleep anymore.  The places we execute vbios init tables are
rare, and not in any way performance critical, so this isn't a huge
problem.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Fixes the DVI-D output on that board (fdo bug 32645).
Reported-by: NBryan Quigley <BryanQuigley@Ubuntu.com>
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

 milisecond -> millisecond
 meassge -> message

Cc: Kalle Valo <kvalo@adurom.com>
Cc: Jiri Kosina <trivial@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

In typical Apple fashion there's no standard information about what
encoders are present on this machine, this patch adds a quirk to
provide it.
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Keep the current interface but ignore the KM_type and use a stack based
approach.

The advantage is that we get rid of crappy code like:

	#define __KM_PTE			\
		(in_nmi() ? KM_NMI_PTE : 	\
		 in_irq() ? KM_IRQ_PTE :	\
		 KM_PTE0)

and in general can stop worrying about what context we're in and what kmap
slots might be appropriate for that.

The downside is that FRV kmap_atomic() gets more expensive.

For now we use a CPP trick suggested by Andrew:

  #define kmap_atomic(page, args...) __kmap_atomic(page)

to avoid having to touch all kmap_atomic() users in a single patch.

[ not compiled on:
  - mn10300: the arch doesn't actually build with highmem to begin with ]

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix up drivers/gpu/drm/i915/intel_overlay.c]
Acked-by: NRik van Riel <riel@redhat.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NChris Metcalf <cmetcalf@tilera.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Miller <davem@davemloft.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This fixes issues bug 30370 and prevents another possible divide by zero on
the original nv50 cards, by returning -ENOENT
Signed-off-by: NEmil Velikov <eeydev@nottingham.ac.uk>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>