- 23 3月, 2007 28 次提交
-
-
由 Pavel Machek 提交于
It causes extra moon icons blinking on x60, and breaks at least two other systems. During resume, we do not know that "reboot"/"shutdown" method was used, so we assume "plaform" and call BIOS, anyway... This is 2.6.21 material, and should fix 2 or 3 regressions from 2.6.20. Signed-off-by: NPavel Machek <pavel@suse.cz> Acked-by: N"Rafael J. Wysocki" <rjw@sisk.pl> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Make the SYSV SHM nattch counter work correctly by forcing multiple VMAs to be produced to represent MAP_SHARED segments, even if they overlap exactly. Using this test program: http://people.redhat.com/~dhowells/doshm.c Run as: doshm sysv I can see nattch going from one before the patch: # /doshm sysv Command: sysv shmid: 65536 memory: 0xc3700000 c0b00000-c0b04000 rw-p 00000000 00:00 0 c0bb0000-c0bba788 r-xs 00000000 00:0b 14582157 /lib/ld-uClibc-0.9.28.so c3180000-c31dede4 r-xs 00000000 00:0b 14582179 /lib/libuClibc-0.9.28.so c3520000-c352278c rw-p 00000000 00:0b 13763417 /doshm c3584000-c35865e8 r-xs 00000000 00:0b 13763417 /doshm c3588000-c358aa00 rw-p 00008000 00:0b 14582157 /lib/ld-uClibc-0.9.28.so c3590000-c359b6c0 rw-p 00000000 00:00 0 c3620000-c3640000 rwxp 00000000 00:00 0 c3700000-c37fa000 rw-S 00000000 00:06 1411 /SYSV00000000 (deleted) c3700000-c37fa000 rw-S 00000000 00:06 1411 /SYSV00000000 (deleted) nattch 1 To two after the patch: # /doshm sysv Command: sysv shmid: 0 memory: 0xc3700000 c0bb0000-c0bba788 r-xs 00000000 00:0b 14582157 /lib/ld-uClibc-0.9.28.so c3180000-c31dede4 r-xs 00000000 00:0b 14582179 /lib/libuClibc-0.9.28.so c3320000-c3340000 rwxp 00000000 00:00 0 c3530000-c35325e8 r-xs 00000000 00:0b 13763417 /doshm c3534000-c353678c rw-p 00000000 00:0b 13763417 /doshm c3538000-c353aa00 rw-p 00008000 00:0b 14582157 /lib/ld-uClibc-0.9.28.so c3590000-c359b6c0 rw-p 00000000 00:00 0 c35a4000-c35a8000 rw-p 00000000 00:00 0 c3700000-c37fa000 rw-S 00000000 00:06 1369 /SYSV00000000 (deleted) c3700000-c37fa000 rw-S 00000000 00:06 1369 /SYSV00000000 (deleted) nattch 2 That's +1 to nattch for each shmat() made. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Supply a get_unmapped_area() to fix NOMMU SYSV SHM support. Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NAdam Litke <agl@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Fix unannotated variable declarations. Variables that have allocation section annotations (such as __meminitdata) on their definitions must also have them on their declarations as not doing so may affect the addressing mode used by the compiler and may result in a linker error. Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NYasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Thomas Gleixner 提交于
The local APIC timer stops to work in deeper C-States. This is handled by the ACPI code and a broadcast mechanism in the clockevents / tick managment code. Some systems do not expose the deeper C-States to the kernel, but switch into deeper C-States behind the kernels back. This delays the local apic timer interrupts for ever and makes the systems unusable. Add a command line option to disable the local apic timer and a dmi quirk for known broken systems. Andi sayeth: While not wrong by itself i think it is still better to use some heuristic -- like "has battery in ACPI" With the DMI table if the problem is more wide spread we will just continue extending it. But anyways should be ok now for .21 although I'm not really happy with it. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NIngo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Grudgingly-acked-by: NAndi Kleen <ak@suse.de> Cc: Len Brown <lenb@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rafael J. Wysocki 提交于
The SNAPSHOT_S2RAM ioctl does not disable the nonboot CPUs before entering the suspend, although it should do this. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Weiner 提交于
I added the 'Q' to list. A short description in the `Ok, so what can I use them for'-section, on when or why to use it would be nice! Signed-off-by: NJohannes Weiner <hannes-kernel@saeurebad.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Adrian Bunk 提交于
NULL checks should be before the first dereference. Spotted by the Coverity checker. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NOndrej Zajicek <santiago@crfreenet.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://jdelvare.pck.nerim.net/jdelvare-2.6由 Linus Torvalds 提交于
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c/ds1374: Check workqueue creation status i2c-i801: Restore the device state before leaving i2c-amd8111: Missed cleanup
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NETFILTER]: nat: avoid rerouting packets if only XFRM policy key changed [NETFILTER]: nf_conntrack_netlink: add missing dependency on NF_NAT [NET]: fix up misplaced inlines. [SCTP]: Correctly reset ssthresh when restarting association [BRIDGE]: Fix fdb RCU race [NET]: Fix fib_rules dump race [XFRM]: ipsecv6 needs a space when printing audit record. [X25] x25_forward_call(): fix NULL dereferences [SCTP]: Reset some transport and association variables on restart [SCTP]: Increment error counters on user requested HBs. [SCTP]: Clean up stale data during association restart [IrDA]: Calling ppp_unregister_channel() from process context [IrDA]: irttp_dup spin_lock initialisation [IrDA]: Delay needed when uploading firmware chunks
-
由 Linus Torvalds 提交于
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/ipoib: Fix thinko in packet length checks IPoIB: Fix use-after-free in path_rec_completion() IB/ehca: Make scaling code work without CPU hotplug RDMA/cxgb3: Handle build_phys_page_list() failure in iwch_reregister_phys_mem() IB/ipath: Check return value of lookup_one_len IPoIB: Fix race in detaching from mcast group before attaching IPoIB/cm: Fix reaping of stale connections
-
由 Thomas Gleixner 提交于
The PIT has no dedicated mode for shut down. The only way to disable PIT is to put it into one shot mode. AMD implementations of PIT on Geode (also observed on Cyrix) are confused by an "empty" transition from CLOCK_EVT_MODE_UNUSED to CLOCK_EVT_MODE_SHUTDOWN, which puts the PIT into one shot mode momentarily. I realized after staring helpless at the bug report http://bugzilla.kernel.org/show_bug.cgi?id=8027 for quite a while, that the only change, which might influence the bogomips calibration, is the above transition during the PIT initialization. Avoiding the unnecessary switch to oneshot and later to periodic mode fixes the weird bogomips value and also the resulting slowness. The fix is confirmed on OLPC and another Geode based box. Note: this is unrelated to the Dual Core problem discussed here: http://lkml.org/lkml/2007/3/17/48Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael S. Tsirkin 提交于
The packet length checks in ipoib are broken: we add 4 bytes (IPoIB encapsulation header) when sending a packet, not 20 bytes (hardware address length) to each packet. Therefore, if connected mode is enabled so that the interface MTU is larger than the multicast MTU, IPoIB may end up trying to send too-long multicast packets. For example, multicast is broken if a message of size 2048 bytes is sent on an interface with UD MTU 2048, because 2048 is bigger than the real limit of 2044 but the code tests against the wrong limit of 2060. This patch fixes <https://bugs.openfabrics.org/show_bug.cgi?id=418>, submitted by Scott Weitzenkamp <sweitzen@cisco.com>. Signed-off-by: NMichael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Michael S. Tsirkin 提交于
The connected mode code added the possibility that an neigh struct gets freed in the list_for_each_entry() loop in path_rec_completion(), which causes a use-after-free. Fix this by changing to the _safe variant of the list walking macro. This was spotted by the Coverity checker (CID 1567). Signed-off-by: NMichael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Joachim Fenkes 提交于
eHCA scaling code must not depend on register_cpu_notifier() if CONFIG_HOTPLUG_CPU is not set, so put all related code into #ifdefs. Signed-off-by: NJoachim Fenkes <fenkes@de.ibm.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Steve Wise 提交于
Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Bryan O'Sullivan 提交于
This fixes kernel.org bug 8003. Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Sean Hefty 提交于
There's a race between ipoib_mcast_leave() and ipoib_mcast_join_finish() where we can try to detach from a multicast group before we've attached to it. Fix this by reordering the code in ipoib_mcast_leave to free the multicast group first, which waits for the multicast callback thread (which calls ipoib_mcast_join_finish()) to complete before detaching from the group. Signed-off-by: NSean Hefty <sean.hefty@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Michael S. Tsirkin 提交于
The sense of the time_after_eq() test in ipoib_cm_stale_task() is reversed so that only non-stale connections are reaped. Fix this by changing to time_before_eq(). Noticed by Pradeep Satyanarayana <pradeep@us.ibm.com>. Signed-off-by: NMichael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Patrick McHardy 提交于
Currently NAT not only reroutes packets in the OUTPUT chain when the routing key changed, but also if only the non-routing part of the IPsec policy key changed. This breaks ping -I since it doesn't use SO_BINDTODEVICE but IP_PKTINFO cmsg to specify the output device, and this information is lost. Only do full rerouting if the routing key changed, and just do a new policy lookup with the old route if only the ports changed. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
NF_CT_NETLINK=y, NF_NAT=m results in: LD .tmp_vmlinux1 net/built-in.o: dans la fonction « nfnetlink_parse_nat_proto »: nf_conntrack_netlink.c:(.text+0x28db9): référence indéfinie vers « nf_nat_proto_find_get » nf_conntrack_netlink.c:(.text+0x28dd6): référence indéfinie vers « nf_nat_proto_put » net/built-in.o: dans la fonction « ctnetlink_new_conntrack »: nf_conntrack_netlink.c:(.text+0x29959): référence indéfinie vers « nf_nat_setup_info » nf_conntrack_netlink.c:(.text+0x29b35): référence indéfinie vers « nf_nat_setup_info » nf_conntrack_netlink.c:(.text+0x29cf7): référence indéfinie vers « nf_nat_setup_info » nf_conntrack_netlink.c:(.text+0x29de2): référence indéfinie vers « nf_nat_setup_info » make: *** [.tmp_vmlinux1] Erreur 1 Reported by Kevin Baradon <kevin.baradon@gmail.com> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dave Jones 提交于
Turning up the warnings on gcc makes it emit warnings about the placement of 'inline' in function declarations. Here's everything that was under net/ Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
Reset ssthresh to the correct value (peer's a_rwnd) when restarting association. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
br_fdb_get use atomic_inc to increase the refcount of an element found on a RCU protected list, which can lead to the following race: CPU0 CPU1 br_fdb_get: rcu_read_lock __br_fdb_get: find element fdb_delete: hlist_del_rcu br_fdb_put br_fdb_put: atomic_dec_and_test call_rcu(fdb_rcu_free) br_fdb_get: atomic_inc rcu_read_unlock fdb_rcu_free: kmem_cache_free Use atomic_inc_not_zero instead. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
fib_rules_dump needs to use list_for_each_entry_rcu to protect against concurrent changes to the rules list. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cyrill V. Gorcunov 提交于
Check if workqueue creation failed. Further usage of NULL pointed workqueue is not good I guess ;) Signed-off-by: NCyrill V. Gorcunov <gorcunov@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Restore the original host configuration on driver unload and on suspend. In particular this returns the SMBus master in I2C mode if it was originally in I2C mode, which should help with suspend/resume if the BIOS expects to find the SMBus master in I2C mode. This fixes bug #6449 (for real this time.) http://bugzilla.kernel.org/show_bug.cgi?id=6449Signed-off-by: NJean Delvare <khali@linux-fr.org> Tested-by: NTommi Kyntola <tommi.kyntola@ray.fi>
-
由 Jean Delvare 提交于
I missed one cleanup in my previous patch. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 22 3月, 2007 2 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Fix wrong /proc/iomem on SGI Altix [IA64] Altix: ioremap vga_console_iobase [IA64] Fix typo/thinko in crash.c [IA64] Fix get_model_name() for mixed cpu type systems [IA64] min_low_pfn and max_low_pfn calculation fix
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] tcrypt: Fix error checking for comp allocation [CRYPTO] doc: Fix typo in hash example [CRYPTO] api: scatterwalk_copychunks() fails to advance through scatterlist
-
- 21 3月, 2007 8 次提交
-
-
由 Sebastian Siewior 提交于
This patch fixes loading the tcrypt module while deflate isn't available at all (isn't build). Signed-off-by: NSebastian Siewior <linux-crypto@ml.breakpoint.cc> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Johannes Schlumberger 提交于
there is a tiny bug in Documentation/crypto/api-intro.txt. The file has the following example code: struct scatterlist sg[2]; [...] if (crypto_hash_digest(&desc, &sg, 2, result)) which does not match the declaration of crypto_hash_digest() in include/linux/crypto.h. (static inline int crypto_hash_digest(struct hash_desc *desc, struct scatterlist *sg, unsigned int nbytes, u8 *out) The code in the example passes the address of a pointer (an array actually) as the second argument, while the function expects the pointer itself. I have attached a patch to fix this. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 J. Bruce Fields 提交于
In the loop in scatterwalk_copychunks(), if walk->offset is zero, then scatterwalk_pagedone rounds that up to the nearest page boundary: walk->offset += PAGE_SIZE - 1; walk->offset &= PAGE_MASK; which is a no-op in this case, so we don't advance to the next element of the scatterlist array: if (walk->offset >= walk->sg->offset + walk->sg->length) scatterwalk_start(walk, sg_next(walk->sg)); and we end up copying the same data twice. It appears that other callers of scatterwalk_{page}done first advance walk->offset, so I believe that's the correct thing to do here. This caused a bug in NFS when run with krb5p security, which would cause some writes to fail with permissions errors--for example, writes of less than 8 bytes (the des blocksize) at the start of a file. A git-bisect shows the bug was originally introduced by 5c64097a, first in 2.6.19-rc1. Signed-off-by: N"J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Bernhard Walle 提交于
In sn_io_slot_fixup(), the parent is re-set from the bus to io(port|mem)_resource because the address is changed in a way that it's not child of the bus any more. However, only the root is set but not the parent/child/sibling relationship in the resource tree which causes 'cat /proc/iomem' to stop after this memory area. Depding on the poition in the tree the iomem may be nearly completely empty. Signed-off-by: NBernhard Walle <bwalle@suse.de> Acked-by: NJohn Keller <jpk@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 John Keller 提交于
When booting an SN system without specifing a console (i.e., no "console=" on boot line), the system will hang during boot at the point where /sbin/init is run. The problem is that vga_console_iobase is not converted to a virtual address before storing in io_space[0].mmio_base. The conversion was happening in sn_scan_pcdp(), but not in setup_vga_console(). Signed-off-by: NJohn Keller <jpk@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Jay Lan 提交于
Clearly should be checking for "val == DIE_INIT_SLAVE_ENTER". Signed-off-by: NJay Lan <jlan@sgi.com> Acked-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Jack Steiner 提交于
If a system consists of mixed processor types, kmalloc() can be called before the per-cpu data page is initialized. If the slab contains sufficient memory, then kmalloc() works ok. However, if the slabs are empty, slab calls the memory allocator. This requires per-cpu data (NODE_DATA()) & the cpu dies. Also noted by Russ Anderson who had a very similar patch. Signed-off-by: NJack Steiner <steiner@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Zou Nan hai 提交于
We have seen bad_pte_print when testing crashdump on an SN machine in recent 2.6.20 kernel. There are tons of bad pte print (pfn < max_low_pfn) reports when the crash kernel boots up, all those reported bad pages are inside initmem range; That is because if the crash kernel code and data happens to be at the beginning of the 1st node. build_node_maps in discontig.c will bypass reserved regions with filter_rsvd_memory. Since min_low_pfn is calculated in build_node_map, so in this case, min_low_pfn will be greater than kernel code and data. Because pages inside initmem are freed and reused later, we saw pfn_valid check fail on those pages. I think this theoretically happen on a normal kernel. When I check min_low_pfn and max_low_pfn calculation in contig.c and discontig.c. I found more issues than this. 1. min_low_pfn and max_low_pfn calculation is inconsistent between contig.c and discontig.c, min_low_pfn is calculated as the first page number of boot memmap in contig.c (Why? Though this may work at the most of the time, I don't think it is the right logic). It is calculated as the lowest physical memory page number bypass reserved regions in discontig.c. max_low_pfn is calculated include reserved regions in contig.c. It is calculated exclude reserved regions in discontig.c. 2. If kernel code and data region is happen to be at the begin or the end of physical memory, when min_low_pfn and max_low_pfn calculation is bypassed kernel code and data, pages in initmem will report bad. 3. initrd is also in reserved regions, if it is at the begin or at the end of physical memory, kernel will refuse to reuse the memory. Because the virt_addr_valid check in free_initrd_mem. So it is better to fix and clean up those issues. Calculate min_low_pfn and max_low_pfn in a consistent way. Signed-off-by: NZou Nan hai <nanhai.zou@intel.com> Acked-by: NJay Lan <jlan@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
- 20 3月, 2007 2 次提交
-
-
由 Joy Latten 提交于
This patch adds a space between printing of the src and dst ipv6 addresses. Otherwise, audit or other test tools may fail to process the audit record properly because they cannot find the dst address. Signed-off-by: NJoy Latten <latten@austin.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Bunk 提交于
This patch fixes two NULL dereferences spotted by the Coverity checker. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-