Provide a command line and a sysfs knob to control SMT.

The command line options are:

 'nosmt':	Enumerate secondary threads, but do not online them
 		
 'nosmt=force': Ignore secondary threads completely during enumeration
 		via MP table and ACPI/MADT.

The sysfs control file has the following states (read/write):

 'on':		 SMT is enabled. Secondary threads can be freely onlined
 'off':		 SMT is disabled. Secondary threads, even if enumerated
 		 cannot be onlined
 'forceoff':	 SMT is permanentely disabled. Writes to the control
 		 file are rejected.
 'notsupported': SMT is not supported by the CPU

The command line option 'nosmt' sets the sysfs control to 'off'. This
can be changed to 'on' to reenable SMT during runtime.

The command line option 'nosmt=force' sets the sysfs control to
'forceoff'. This cannot be changed during runtime.

When SMT is 'on' and the control file is changed to 'off' then all online
secondary threads are offlined and attempts to online a secondary thread
later on are rejected.

When SMT is 'off' and the control file is changed to 'on' then secondary
threads can be onlined again. The 'off' -> 'on' transition does not
automatically online the secondary threads.

When the control file is set to 'forceoff', the behaviour is the same as
setting it to 'off', but the operation is irreversible and later writes to
the control file are rejected.

When the control status is 'notsupported' then writes to the control file
are rejected.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: NIngo Molnar <mingo@kernel.org>

HAVE_CC_STACKPROTECTOR should be selected by architectures with stack
canary implementation.  It is not about the compiler support.

For the consistency with commit 050e9baa ("Kbuild: rename
CC_STACKPROTECTOR[_STRONG] config variables"), remove 'CC_' from the
config symbol.

I moved the 'select' lines to keep the alphabetical sorting.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 2a61f474 ("stack-protector: test compiler capability in
Kconfig and drop AUTO mode") replaced the 'choice' with two boolean
symbols, so CC_STACKPROTECTOR_NONE no longer exists.

Prior to commit 2bc2f688 ("Makefile: move stack-protector
availability out of Kconfig"), this line was like this:

  depends on X86_32 && !CC_STACKPROTECTOR

The CC_ prefix was dropped by commit 050e9baa ("Kbuild: rename
CC_STACKPROTECTOR[_STRONG] config variables"), so the dependency now
should be:

  depends on X86_32 && !STACKPROTECTOR
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move the test for -fstack-protector(-strong) option to Kconfig.

If the compiler does not support the option, the corresponding menu
is automatically hidden.  If STRONG is not supported, it will fall
back to REGULAR.  If REGULAR is not supported, it will be disabled.
This means, AUTO is implicitly handled by the dependency solver of
Kconfig, hence removed.

I also turned the 'choice' into only two boolean symbols.  The use of
'choice' is not a good idea here, because all of all{yes,mod,no}config
would choose the first visible value, while we want allnoconfig to
disable as many features as possible.

X86 has additional shell scripts in case the compiler supports those
options, but generates broken code.  I added CC_HAS_SANE_STACKPROTECTOR
to test this.  I had to add -m32 to gcc-x86_32-has-stack-protector.sh
to make it work correctly.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NKees Cook <keescook@chromium.org>

Currently the PTE special supports is turned on in per architecture
header files.  Most of the time, it is defined in
arch/*/include/asm/pgtable.h depending or not on some other per
architecture static definition.

This patch introduce a new configuration variable to manage this
directly in the Kconfig files.  It would later replace
__HAVE_ARCH_PTE_SPECIAL.

Here notes for some architecture where the definition of
__HAVE_ARCH_PTE_SPECIAL is not obvious:

arm
 __HAVE_ARCH_PTE_SPECIAL which is currently defined in
arch/arm/include/asm/pgtable-3level.h which is included by
arch/arm/include/asm/pgtable.h when CONFIG_ARM_LPAE is set.
So select ARCH_HAS_PTE_SPECIAL if ARM_LPAE.

powerpc
__HAVE_ARCH_PTE_SPECIAL is defined in 2 files:
 - arch/powerpc/include/asm/book3s/64/pgtable.h
 - arch/powerpc/include/asm/pte-common.h
The first one is included if (PPC_BOOK3S & PPC64) while the second is
included in all the other cases.
So select ARCH_HAS_PTE_SPECIAL all the time.

sparc:
__HAVE_ARCH_PTE_SPECIAL is defined if defined(__sparc__) &&
defined(__arch64__) which are defined through the compiler in
sparc/Makefile if !SPARC32 which I assume to be if SPARC64.
So select ARCH_HAS_PTE_SPECIAL if SPARC64

There is no functional change introduced by this patch.

Link: http://lkml.kernel.org/r/1523433816-14460-2-git-send-email-ldufour@linux.vnet.ibm.comSigned-off-by: NLaurent Dufour <ldufour@linux.vnet.ibm.com>
Suggested-by: NJerome Glisse <jglisse@redhat.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <albert@sifive.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Christophe LEROY <christophe.leroy@c-s.fr>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

AMD SME claims one bit from physical address to indicate whether the
page is encrypted or not. To achieve that we clear out the bit from
__PHYSICAL_MASK.

The capability to adjust __PHYSICAL_MASK is required beyond AMD SME.
For instance for upcoming Intel Multi-Key Total Memory Encryption.

Factor it out into a separate feature with own Kconfig handle.

It also helps with overhead of AMD SME. It saves more than 3k in .text
on defconfig + AMD_MEM_ENCRYPT:

	add/remove: 3/2 grow/shrink: 5/110 up/down: 189/-3753 (-3564)

We would need to return to this once we have infrastructure to patch
constants in code. That's good candidate for it.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NTom Lendacky <thomas.lendacky@amd.com>
Cc: linux-mm@kvack.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20180518113028.79825-1-kirill.shutemov@linux.intel.com

Call the rseq_handle_notify_resume() function on return to userspace if
TIF_NOTIFY_RESUME thread flag is set.

Perform fixup on the pre-signal frame when a signal is delivered on top
of a restartable sequence critical section.

Check that system calls are not invoked from within rseq critical
sections by invoking rseq_signal() from syscall_return_slowpath().
With CONFIG_DEBUG_RSEQ, such behavior results in termination of the
process with SIGSEGV.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Watson <davejwatson@fb.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Chris Lameter <cl@linux.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Andrew Hunter <ahh@google.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Maurer <bmaurer@fb.com>
Cc: linux-api@vger.kernel.org
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lkml.kernel.org/r/20180602124408.8430-7-mathieu.desnoyers@efficios.com

To get access to environment variables, Kconfig needs to define a
symbol using "option env=" syntax.  It is tedious to add a symbol entry
for each environment variable given that we need to define much more
such as 'CC', 'AS', 'srctree' etc. to evaluate the compiler capability
in Kconfig.

Adding '$' for symbol references is grammatically inconsistent.
Looking at the code, the symbols prefixed with 'S' are expanded by:
 - conf_expand_value()
   This is used to expand 'arch/$ARCH/defconfig' and 'defconfig_list'
 - sym_expand_string_value()
   This is used to expand strings in 'source' and 'mainmenu'

All of them are fixed values independent of user configuration.  So,
they can be changed into the direct expansion instead of symbols.

This change makes the code much cleaner.  The bounce symbols 'SRCARCH',
'ARCH', 'SUBARCH', 'KERNELVERSION' are gone.

sym_init() hard-coding 'UNAME_RELEASE' is also gone.  'UNAME_RELEASE'
should be replaced with an environment variable.

ARCH_DEFCONFIG is a normal symbol, so it should be simply referenced
without '$' prefix.

The new syntax is addicted by Make.  The variable reference needs
parentheses, like $(FOO), but you can omit them for single-letter
variables, like $F.  Yet, in Makefiles, people tend to use the
parenthetical form for consistency / clarification.

At this moment, only the environment variable is supported, but I will
extend the concept of 'variable' later on.

The variables are expanded in the lexer so we can simplify the token
handling on the parser side.

For example, the following code works.

[Example code]

  config MY_TOOLCHAIN_LIST
          string
          default "My tools: CC=$(CC), AS=$(AS), CPP=$(CPP)"

[Result]

  $ make -s alldefconfig && tail -n 1 .config
  CONFIG_MY_TOOLCHAIN_LIST="My tools: CC=gcc, AS=as, CPP=gcc -E"
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NKees Cook <keescook@chromium.org>

Use the updated memcpy_mcsafe() implementation to define
copy_user_mcsafe() and copy_to_iter_mcsafe(). The most significant
difference from typical copy_to_iter() is that the ITER_KVEC and
ITER_BVEC iterator types can fail to complete a full transfer.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: hch@lst.de
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-nvdimm@lists.01.org
Link: http://lkml.kernel.org/r/152539239150.31796.9189779163576449784.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This way we have one central definition of it, and user can select it as
needed.  The new option is not user visible, which is the behavior
it had in most architectures, with a few notable exceptions:

 - On x86_64 and mips/loongson3 it used to be user selectable, but
   defaulted to y.  It now is unconditional, which seems like the right
   thing for 64-bit architectures without guaranteed availablity of
   IOMMUs.
 - on powerpc the symbol is user selectable and defaults to n, but
   many boards select it.  This change assumes no working setup
   required a manual selection, but if that turned out to be wrong
   we'll have to add another select statement or two for the respective
   boards.
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Define this symbol if the architecture either uses 64-bit pointers or the
PHYS_ADDR_T_64BIT is set.  This covers 95% of the old arch magic.  We only
need an additional select for Xen on ARM (why anyway?), and we now always
set ARCH_DMA_ADDR_T_64BIT on mips boards with 64-bit physical addressing
instead of only doing it when highmem is set.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NJames Hogan <jhogan@kernel.org>

Instead select the PHYS_ADDR_T_64BIT for 32-bit architectures that need a
64-bit phys_addr_t type directly.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NJames Hogan <jhogan@kernel.org>

This way we have one central definition of it, and user can select it as
needed.  Note that we now also always select it when CONFIG_DMA_API_DEBUG
is select, which fixes some incorrect checks in a few network drivers.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com>

This way we have one central definition of it, and user can select it as
needed.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com>

This way we have one central definition of it, and user can select it as
needed.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com>

This avoids selecting IOMMU_HELPER just for this function.  And we only
use it once or twice in normal builds so this often even is a size
reduction.
Signed-off-by: NChristoph Hellwig <hch@lst.de>

There is no arch specific code required for dma-debug, so there is no
need to opt into the support either.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NRobin Murphy <robin.murphy@arm.com>

The JIT compiler emits ia32 bit instructions. Currently, It supports eBPF
only. Classic BPF is supported because of the conversion by BPF core.

Almost all instructions from eBPF ISA supported except the following:
BPF_ALU64 | BPF_DIV | BPF_K
BPF_ALU64 | BPF_DIV | BPF_X
BPF_ALU64 | BPF_MOD | BPF_K
BPF_ALU64 | BPF_MOD | BPF_X
BPF_STX | BPF_XADD | BPF_W
BPF_STX | BPF_XADD | BPF_DW

It doesn't support BPF_JMP|BPF_CALL with BPF_PSEUDO_CALL at the moment.

IA32 has few general purpose registers, EAX|EDX|ECX|EBX|ESI|EDI. I use
EAX|EDX|ECX|EBX as temporary registers to simulate instructions in eBPF
ISA, and allocate ESI|EDI to BPF_REG_AX for constant blinding, all others
eBPF registers, R0-R10, are simulated through scratch space on stack.

The reasons behind the hardware registers allocation policy are:
1:MUL need EAX:EDX, shift operation need ECX, so they aren't fit
  for general eBPF 64bit register simulation.
2:We need at least 4 registers to simulate most eBPF ISA operations
  on registers operands instead of on register&memory operands.
3:We need to put BPF_REG_AX on hardware registers, or constant blinding
  will degrade jit performance heavily.

Tested on PC (Intel(R) Core(TM) i5-5200U CPU).
Testing results on i5-5200U:
1) test_bpf: Summary: 349 PASSED, 0 FAILED, [319/341 JIT'ed]
2) test_progs: Summary: 83 PASSED, 0 FAILED.
3) test_lpm: OK
4) test_lru_map: OK
5) test_verifier: Summary: 828 PASSED, 0 FAILED.

Above tests are all done in following two conditions separately:
1:bpf_jit_enable=1 and bpf_jit_harden=0
2:bpf_jit_enable=1 and bpf_jit_harden=2

Below are some numbers for this jit implementation:
Note:
  I run test_progs in kselftest 100 times continuously for every condition,
  the numbers are in format: total/times=avg.
  The numbers that test_bpf reports show almost the same relation.

a:jit_enable=0 and jit_harden=0            b:jit_enable=1 and jit_harden=0
  test_pkt_access:PASS:ipv4:15622/100=156    test_pkt_access:PASS:ipv4:10674/100=106
  test_pkt_access:PASS:ipv6:9130/100=91      test_pkt_access:PASS:ipv6:4855/100=48
  test_xdp:PASS:ipv4:240198/100=2401         test_xdp:PASS:ipv4:138912/100=1389
  test_xdp:PASS:ipv6:137326/100=1373         test_xdp:PASS:ipv6:68542/100=685
  test_l4lb:PASS:ipv4:61100/100=611          test_l4lb:PASS:ipv4:37302/100=373
  test_l4lb:PASS:ipv6:101000/100=1010        test_l4lb:PASS:ipv6:55030/100=550

c:jit_enable=1 and jit_harden=2
  test_pkt_access:PASS:ipv4:10558/100=105
  test_pkt_access:PASS:ipv6:5092/100=50
  test_xdp:PASS:ipv4:131902/100=1319
  test_xdp:PASS:ipv6:77932/100=779
  test_l4lb:PASS:ipv4:38924/100=389
  test_l4lb:PASS:ipv6:57520/100=575

The numbers show we get 30%~50% improvement.

See Documentation/networking/filter.txt for more information.

Changelog:

 Changes v5-v6:
 1:Add do {} while (0) to RETPOLINE_RAX_BPF_JIT for
   consistence reason.
 2:Clean up non-standard comments, reported by Daniel Borkmann.
 3:Fix a memory leak issue, repoted by Daniel Borkmann.

 Changes v4-v5:
 1:Delete is_on_stack, BPF_REG_AX is the only one
   on real hardware registers, so just check with
   it.
 2:Apply commit 1612a981 ("bpf, x64: fix JIT emission
   for dead code"), suggested by Daniel Borkmann.

 Changes v3-v4:
 1:Fix changelog in commit.
   I install llvm-6.0, then test_progs willn't report errors.
   I submit another patch:
   "bpf: fix misaligned access for BPF_PROG_TYPE_PERF_EVENT program type on x86_32 platform"
   to fix another problem, after that patch, test_verifier willn't report errors too.
 2:Fix clear r0[1] twice unnecessarily in *BPF_IND|BPF_ABS* simulation.

 Changes v2-v3:
 1:Move BPF_REG_AX to real hardware registers for performance reason.
 3:Using bpf_load_pointer instead of bpf_jit32.S, suggested by Daniel Borkmann.
 4:Delete partial codes in 1c2a088a, suggested by Daniel Borkmann.
 5:Some bug fixes and comments improvement.

 Changes v1-v2:
 1:Fix bug in emit_ia32_neg64.
 2:Fix bug in emit_ia32_arsh_r64.
 3:Delete filename in top level comment, suggested by Thomas Gleixner.
 4:Delete unnecessary boiler plate text, suggested by Thomas Gleixner.
 5:Rewrite some words in changelog.
 6:CodingSytle improvement and a little more comments.
Signed-off-by: NWang YanQing <udknight@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

commit ce9962bf7e22bb3891655c349faff618922d4a73

0day reported warnings at boot on 32-bit systems without NX support:

attempted to set unsupported pgprot: 8000000000000025 bits: 8000000000000000 supported: 7fffffffffffffff
WARNING: CPU: 0 PID: 1 at
arch/x86/include/asm/pgtable.h:540 handle_mm_fault+0xfc1/0xfe0:
 check_pgprot at arch/x86/include/asm/pgtable.h:535
 (inlined by) pfn_pte at arch/x86/include/asm/pgtable.h:549
 (inlined by) do_anonymous_page at mm/memory.c:3169
 (inlined by) handle_pte_fault at mm/memory.c:3961
 (inlined by) __handle_mm_fault at mm/memory.c:4087
 (inlined by) handle_mm_fault at mm/memory.c:4124

The problem is that due to the recent commit which removed auto-massaging
of page protections, filtering page permissions at PTE creation time is not
longer done, so vma->vm_page_prot is passed unfiltered to PTE creation.

Filter the page protections before they are installed in vma->vm_page_prot.

Fixes: fb43d6cb ("x86/mm: Do not auto-massage page protections")
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NIngo Molnar <mingo@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@google.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: linux-mm@kvack.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Link: https://lkml.kernel.org/r/20180420222028.99D72858@viggo.jf.intel.com

Patch series "kexec_file, x86, powerpc: refactoring for other
architecutres", v2.

This is a preparatory patchset for adding kexec_file support on arm64.

It was originally included in a arm64 patch set[1], but Philipp is also
working on their kexec_file support on s390[2] and some changes are now
conflicting.

So these common parts were extracted and put into a separate patch set
for better integration.  What's more, my original patch#4 was split into
a few small chunks for easier review after Dave's comment.

As such, the resulting code is basically identical with my original, and
the only *visible* differences are:

 - renaming of _kexec_kernel_image_probe() and  _kimage_file_post_load_cleanup()

 - change one of types of arguments at prepare_elf64_headers()

Those, unfortunately, require a couple of trivial changes on the rest
(#1, #6 to #13) of my arm64 kexec_file patch set[1].

Patch #1 allows making a use of purgatory optional, particularly useful
for arm64.

Patch #2 commonalizes arch_kexec_kernel_{image_probe, image_load,
verify_sig}() and arch_kimage_file_post_load_cleanup() across
architectures.

Patches #3-#7 are also intended to generalize parse_elf64_headers(),
along with exclude_mem_range(), to be made best re-use of.

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2018-February/561182.html
[2] http://lkml.iu.edu//hypermail/linux/kernel/1802.1/02596.html

This patch (of 7):

On arm64, crash dump kernel's usable memory is protected by *unmapping*
it from kernel virtual space unlike other architectures where the region
is just made read-only.  It is highly unlikely that the region is
accidentally corrupted and this observation rationalizes that digest
check code can also be dropped from purgatory.  The resulting code is so
simple as it doesn't require a bit ugly re-linking/relocation stuff,
i.e.  arch_kexec_apply_relocations_add().

Please see:

   http://lists.infradead.org/pipermail/linux-arm-kernel/2017-December/545428.html

All that the purgatory does is to shuffle arguments and jump into a new
kernel, while we still need to have some space for a hash value
(purgatory_sha256_digest) which is never checked against.

As such, it doesn't make sense to have trampline code between old kernel
and new kernel on arm64.

This patch introduces a new configuration, ARCH_HAS_KEXEC_PURGATORY, and
allows related code to be compiled in only if necessary.

[takahiro.akashi@linaro.org: fix trivial screwup]
  Link: http://lkml.kernel.org/r/20180309093346.GF25863@linaro.org
Link: http://lkml.kernel.org/r/20180306102303.9063-2-takahiro.akashi@linaro.orgSigned-off-by: NAKASHI Takahiro <takahiro.akashi@linaro.org>
Acked-by: NDave Young <dyoung@redhat.com>
Tested-by: NDave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This Kconfig warning appeared after a fix to the Kconfig validation.
The GPIO_CS5535 driver depends on the MFD_CS5535 driver, but the former
is selected in places where the latter is not:

WARNING: unmet direct dependencies detected for GPIO_CS5535
  Depends on [m]: GPIOLIB [=y] && (X86 [=y] || MIPS || COMPILE_TEST [=y]) && MFD_CS5535 [=m]
  Selected by [y]:
  - OLPC_XO1_SCI [=y] && X86_32 [=y] && OLPC [=y] && OLPC_XO1_PM [=y] && INPUT [=y]=y

The warning does seem appropriate, since the GPIO_CS5535 driver won't
work unless MFD_CS5535 is also present. However, there is no link time
dependency between the two, so this caused no problems during randconfig
testing before.

This changes the 'select GPIO_CS5535' to 'depends on GPIO_CS5535' to
avoid the issue, at the expense of making it harder to configure the
driver (one now has to select the dependencies first).

The 'select MFD_CORE' part is completely redundant, since we already
depend on MFD_CS5535 here, so I'm removing that as well.

Ideally, the private symbols exported by that cs5535 gpio driver would
just be converted to gpiolib interfaces so we could expletely avoid
this dependency.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kbuild@vger.kernel.org
Fixes: f622f827 ("kconfig: warn unmet direct dependency of tristate symbols selected by y")
Link: http://lkml.kernel.org/r/20180404124539.3817101-1-arnd@arndb.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

Removing CONFIG_SYSCALL_PTREGS from arch/x86/Kconfig and simply selecting
ARCH_HAS_SYSCALL_WRAPPER unconditionally on x86-64 allows us to simplify
several codepaths.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180405095307.3730-7-linux@dominikbrodowski.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

Extend ARCH_HAS_SYSCALL_WRAPPER for i386 emulation and for x32 on 64-bit
x86.

For x32, all we need to do is to create an additional stub for each
compat syscall which decodes the parameters in x86-64 ordering, e.g.:

	asmlinkage long __compat_sys_x32_xyzzy(struct pt_regs *regs)
	{
		return c_SyS_xyzzy(regs->di, regs->si, regs->dx);
	}

For i386 emulation, we need to teach compat_sys_*() to take struct
pt_regs as its only argument, e.g.:

	asmlinkage long __compat_sys_ia32_xyzzy(struct pt_regs *regs)
	{
		return c_SyS_xyzzy(regs->bx, regs->cx, regs->dx);
	}

In addition, we need to create additional stubs for common syscalls
(that is, for syscalls which have the same parameters on 32-bit and
64-bit), e.g.:

	asmlinkage long __sys_ia32_xyzzy(struct pt_regs *regs)
	{
		return c_sys_xyzzy(regs->bx, regs->cx, regs->dx);
	}

This approach avoids leaking random user-provided register content down
the call chain.

This patch is based on an original proof-of-concept

 | From: Linus Torvalds <torvalds@linux-foundation.org>
 | Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

and was split up and heavily modified by me, in particular to base it on
ARCH_HAS_SYSCALL_WRAPPER.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180405095307.3730-6-linux@dominikbrodowski.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

Let's make use of ARCH_HAS_SYSCALL_WRAPPER=y on pure 64-bit x86-64 systems:

Each syscall defines a stub which takes struct pt_regs as its only
argument. It decodes just those parameters it needs, e.g:

	asmlinkage long sys_xyzzy(const struct pt_regs *regs)
	{
		return SyS_xyzzy(regs->di, regs->si, regs->dx);
	}

This approach avoids leaking random user-provided register content down
the call chain.

For example, for sys_recv() which is a 4-parameter syscall, the assembly
now is (in slightly reordered fashion):

	<sys_recv>:
		callq	<__fentry__>

		/* decode regs->di, ->si, ->dx and ->r10 */
		mov	0x70(%rdi),%rdi
		mov	0x68(%rdi),%rsi
		mov	0x60(%rdi),%rdx
		mov	0x38(%rdi),%rcx

		[ SyS_recv() is automatically inlined by the compiler,
		  as it is not [yet] used anywhere else ]
		/* clear %r9 and %r8, the 5th and 6th args */
		xor	%r9d,%r9d
		xor	%r8d,%r8d

		/* do the actual work */
		callq	__sys_recvfrom

		/* cleanup and return */
		cltq
		retq

The only valid place in an x86-64 kernel which rightfully calls
a syscall function on its own -- vsyscall -- needs to be modified
to pass struct pt_regs onwards as well.

To keep the syscall table generation working independent of
SYSCALL_PTREGS being enabled, the stubs are named the same as the
"original" syscall stubs, i.e. sys_*().

This patch is based on an original proof-of-concept

 | From: Linus Torvalds <torvalds@linux-foundation.org>
 | Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

and was split up and heavily modified by me, in particular to base it on
ARCH_HAS_SYSCALL_WRAPPER, to limit it to 64-bit-only for the time being,
and to update the vsyscall to the new calling convention.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180405095307.3730-4-linux@dominikbrodowski.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

The file Documentation/x86/early-microcode.txt was renamed to
Documentation/x86/microcode.txt in 0e325875, but it was still
referenced by its old name in a three places:

* Documentation/x86/00-INDEX
* arch/x86/Kconfig
* arch/x86/kernel/cpu/microcode/amd.c

This commit updates these references accordingly.

Fixes: 0e325875 ("x86/microcode: Document the three loading methods")
Signed-off-by: NJaak Ristioja <jaak@ristioja.ee>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

node_memmap_size_bytes() has been unused since the v3.9 kernel, so remove it.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Fixes: f03574f2 ("x86-32, mm: Rip out x86_32 NUMA remapping code")
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1803262325540.256524@chino.kir.corp.google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Since we want to rely on static branches to avoid speculation, remove
any possible fallback code for static_cpu_has.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: torvalds@linux-foundation.org
Link: https://lkml.kernel.org/r/20180319154717.705383007@infradead.org

Give the basic phys_to_dma() and dma_to_phys() helpers a __-prefix and add
the memory encryption mask to the non-prefixed versions.  Use the
__-prefixed versions directly instead of clearing the mask again in
various places.
Tested-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20180319103826.12853-13-hch@lst.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

The generic DMA-direct (CONFIG_DMA_DIRECT_OPS=y) implementation is now
functionally equivalent to the x86 nommu dma_map implementation, so
switch over to using it.

That includes switching from using x86_dma_supported in various IOMMU
drivers to use dma_direct_supported instead, which provides the same
functionality.
Tested-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20180319103826.12853-4-hch@lst.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

Jailhouse does not use ACPI, but it does support MMCONFIG. Make sure the
latter can be built without having to enable ACPI as well. Primarily, its
required to make the AMD mmconf-fam10h_64 depend upon MMCONFIG and
ACPI, instead of just the former.

Saves some bytes in the Jailhouse non-root kernel.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: jailhouse-dev@googlegroups.com
Cc: linux-pci@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lkml.kernel.org/r/788bbd5325d1922235e9562c213057425fbc548c.1520408357.git.jan.kiszka@siemens.com

Since e279b6c1 ("x86: start unification of arch/x86/Kconfig.*"), there
exist two PCI_MMCONFIG entries, one from the original i386 and another from
x86_64. Consolidate both entries into a single one.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: jailhouse-dev@googlegroups.com
Cc: linux-pci@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lkml.kernel.org/r/2a0ccd51ea6f7996e07162918228e23bdc1fbb03.1520408357.git.jan.kiszka@siemens.com

Allow to enable PCI_MMCONFIG when only SFI is present and make this option
default on. This will help consolidating both into one Kconfig statement.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: jailhouse-dev@googlegroups.com
Cc: linux-pci@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lkml.kernel.org/r/a2faf78c54f340f5549149e8b679c95950dae83d.1520408357.git.jan.kiszka@siemens.com

Since Linux v3.2, vsyscalls have been deprecated and slow.  From v3.2
on, Linux had three vsyscall modes: "native", "emulate", and "none".

"emulate" is the default.  All known user programs work correctly in
emulate mode, but vsyscalls turn into page faults and are emulated.
This is very slow.  In "native" mode, the vsyscall page is easily
usable as an exploit gadget, but vsyscalls are a bit faster -- they
turn into normal syscalls.  (This is in contrast to vDSO functions,
which can be much faster than syscalls.)  In "none" mode, there are
no vsyscalls.

For all practical purposes, "native" was really just a chicken bit
in case something went wrong with the emulation.  It's been over six
years, and nothing has gone wrong.  Delete it.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Acked-by: NKees Cook <keescook@chromium.org>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Kernel Hardening <kernel-hardening@lists.openwall.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/519fee5268faea09ae550776ce969fa6e88668b0.1520449896.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

ISA_BUS_API is selected by drivers themselves when necessary. The
ISA_BUS Kconfig option is now simply a mask for true ISA device drivers
and relevant configuration. For now, the ISA_BUS Kconfig option is only
available for X86, but may be added for other arch builds in the future
if the need arises.
Signed-off-by: NWilliam Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Disable retpoline validation in objtool if your compiler sucks, and otherwise
select the validation stuff for CONFIG_RETPOLINE=y (most builds would already
have it set due to ORC).
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

All pieces of the puzzle are in place and we can now allow to boot with
CONFIG_X86_5LEVEL=y on a machine without LA57 support.

Kernel will detect that LA57 is missing and fold p4d at runtime.

Update the documentation and the Kconfig option description to reflect the
change.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180214182542.69302-10-kirill.shutemov@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

i586-class machines also lack support for Physical Address Extension (PAE),
so add them to the exclusion list.
Signed-off-by: NMatthew Whitehead <tedheadster@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1518713696-11360-2-git-send-email-tedheadster@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

For boot-time switching between paging modes, we need to be able to
adjust size of physical address space at runtime.

As part of making physical address space size variable, we have to make
X86_5LEVEL dependent on SPARSEMEM_VMEMMAP. !SPARSEMEM_VMEMMAP
configuration doesn't build with variable MAX_PHYSMEM_BITS.

For !SPARSEMEM_VMEMMAP SECTIONS_WIDTH depends on MAX_PHYSMEM_BITS:

SECTIONS_WIDTH
  SECTIONS_SHIFT
    MAX_PHYSMEM_BITS

And SECTIONS_WIDTH is used on pre-processor stage, it doesn't work if it's
dyncamic. See include/linux/page-flags-layout.h.

Effect on kernel image size:

   text	   data	    bss	    dec	    hex	filename
8628393	4734340	1368064	14730797	 e0c62d	vmlinux.before
8628892	4734340	1368064	14731296	 e0c820	vmlinux.after
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180214111656.88514-8-kirill.shutemov@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

We need to be able to adjust virtual memory layout at runtime to be able
to switch between 4- and 5-level paging at boot-time.

KASLR already has movable __VMALLOC_BASE, __VMEMMAP_BASE and __PAGE_OFFSET.
Let's re-use it.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180214111656.88514-4-kirill.shutemov@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Clean up various aspects of the x86 CONFIG_NR_CPUS configuration switches:

- Rename the three CONFIG_NR_CPUS related variables to create a common
  namespace for them:

    RANGE_BEGIN_CPUS => NR_CPUS_RANGE_BEGIN
    RANGE_END_CPUS   => NR_CPUS_RANGE_END
    DEF_CONFIG_CPUS  => NR_CPUS_DEFAULT

- Align them vertically, such as:

    config NR_CPUS_RANGE_END
            int
            depends on X86_64
            default 8192 if  SMP && ( MAXSMP ||  CPUMASK_OFFSTACK)
            default  512 if  SMP && (!MAXSMP && !CPUMASK_OFFSTACK)
            default    1 if !SMP

- Update help text, add more comments.

Test results:

 # i386 allnoconfig:
 CONFIG_NR_CPUS_RANGE_BEGIN=1
 CONFIG_NR_CPUS_RANGE_END=1
 CONFIG_NR_CPUS_DEFAULT=1
 CONFIG_NR_CPUS=1

 # i386 defconfig:
 CONFIG_NR_CPUS_RANGE_BEGIN=2
 CONFIG_NR_CPUS_RANGE_END=8
 CONFIG_NR_CPUS_DEFAULT=8
 CONFIG_NR_CPUS=8

 # i386 allyesconfig:
 CONFIG_NR_CPUS_RANGE_BEGIN=2
 CONFIG_NR_CPUS_RANGE_END=64
 CONFIG_NR_CPUS_DEFAULT=32
 CONFIG_NR_CPUS=32

 # x86_64 allnoconfig:
 CONFIG_NR_CPUS_RANGE_BEGIN=1
 CONFIG_NR_CPUS_RANGE_END=1
 CONFIG_NR_CPUS_DEFAULT=1
 CONFIG_NR_CPUS=1

 # x86_64 defconfig:
 CONFIG_NR_CPUS_RANGE_BEGIN=2
 CONFIG_NR_CPUS_RANGE_END=512
 CONFIG_NR_CPUS_DEFAULT=64
 CONFIG_NR_CPUS=64

 # x86_64 allyesconfig:
 CONFIG_NR_CPUS_RANGE_BEGIN=8192
 CONFIG_NR_CPUS_RANGE_END=8192
 CONFIG_NR_CPUS_DEFAULT=8192
 CONFIG_NR_CPUS=8192
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180210113629.jcv6su3r4suuno63@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>