I2S MCLK has been routed to LSE connector on the MinnowBoard
starting with HW version 3. Older versions of the board do
not have MCLK wired.

Add dmi quirk to disable MCLK for MinnowBoard MAX (v2).
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Use platform clocks "pmc_plt_clk_3" when MCLK quirk is defined.
By default always enable the 19.2 MHz PLL.
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Some platforms have the analog mic connected to IN3,
add route accordingly
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Auto routing based on Baytrail/Baytrail-CR detection
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

SSP0 uses 16 bits 2ch, SSP2 24 bits 2ch
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Allow for all possible combinations of SSP0,SSP2, AIF1, AIF2
combination (only one at a time)
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add quirk to model routing on Baytrail-CR devices
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Existing code used SSP2, make selection of SSP id
dependent on port name. This is required when the
machine driver uses non-default settings
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The Atom DPCM driver only allowed for the SSP2 interface, add
definitions for modem/SSP0.

These definitions might be used to route audio to a codec
connected to SSP0 (instead of a modem in traditional usages),
but there is a restriction to 2ch I2S. SSP2 is capable of
handling up to 4 slot TDM.
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

BYT-CR needs special handling to deal with BIOS issues.
For some reason the IPC interrupt index is also modified from
the Baytrail-T reference.

Use PUNIT BIOS config bits to infer platform details.
Assume regular Baytrail configs if status is incorrect or
CONFIG_IOSF_MBI is not enabled.

SSP0 routing issues are solved without dedicated firmware
in following patches

Tested on Asus T100TA and T100TAF.
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Some Baytrail-CR devices rely on analog mics connected with
differential pairs and not the single-ended default
Add quirk and enable it for T00TAF
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Some Baytrail devices only have a mono speaker, add quirk and enable
it for T100TAF.
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Add quirk based on DMI string matching
Also fix matching to use DMI_EXACT_MATCH otherwise T100TA and T100TAF
will be using same quirk
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Adding missing definitions and flags to select internal
clock source as system clock, needed for jack detection.
Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Now that we have balanced loading of the topology file and split of init
and fw_init and fill module data during asoc probe.

So remove it from runtime, but keep error check in case things fall apart.
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Once topology and firmware are loaded, we can parse the manifest. Use driver
pipe and widget list to get list of all modules and populate the data.
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

snd_skl_get_module_info() takes skl_dfw_module as an argument. The users
then updates the topology data, so instead pass skl_module_cfg and let
snd_skl_get_module_info() fill that up.
Signed-off-by: NDharageswari R <dharageswari.r@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The HDA controller from SKL onwards support additional timestamp
reporting of the link time. The link time is read from HW
registers and converted to audio values.
Signed-off-by: NGuneshwor Singh <guneshwor.o.singh@intel.com>
Signed-off-by: NHardik T Shah <hardik.t.shah@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Skylake onwards HDA controller supports new capabilities like
Global Time Stamping (GTS) capability. So add support to parse
these new capabilities.
Signed-off-by: NGuneshwor Singh <guneshwor.o.singh@intel.com>
Signed-off-by: NHardik T Shah <hardik.t.shah@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Remove the unused one as we have moved it up to hdac core.
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now that we have the bus parse capabilities moved to core, we need to
convert users.

The SKL driver and HDA extended lib needs to converted in single patch,
otherwise we regress on the functionality.
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HDA capability introduced recently are move to hdac core so that it can
be used by legacy driver as well. Also move the capability pointers up
to hdac_bus object.
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

A module can be scheduled in deferent processing domains in DSP. Topology
specifies the module domain.
Signed-off-by: NSenthilnathan Veppur <senthilnathanx.veppur@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

While changing code notice bad comment style, so fix it up.
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The library load is added as one of the ops in skl_dsp_fw_ops().

The manifest load gives the files to be loaded which are loaded during
the fw_init()
Signed-off-by: NRamesh Babu <ramesh.babu@intel.com>
Signed-off-by: NKranthi G <gudishax.kranthikumar@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

sound/soc/intel/skylake/skl-topology.c:480:24-30: ERROR: application of sizeof to pointer

 sizeof when applied to a pointer typed expression gives the size of
 the pointer

Generated by: scripts/coccinelle/misc/noderef.cocci
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

DSP fw can have additional firmwares as libs. These libs can be
loaded using message IPC_GLB_LOAD_LIBRARY.
Signed-off-by: NRamesh Babu <ramesh.babu@intel.com>
Signed-off-by: NKranthi G <gudishax.kranthikumar@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The firmware manifest contains UUIDs which needs to be passed only once.

So use the newly introduced is_first_boot flag to distinguish and parse
these only once on bxt platform as well.
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The firmware manifest contains UUIDs which needs to be passed only once.

So use the newly introduced is_first_boot flag to distinguish and parse
these only once.
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

For additional library parsing, we need to pass firmware to be
loaded and not use the pointer in context. Also, Library module
IDs are combination of library index and module ID in manifest.

So add the additional arguments of firmware and library offset to
snd_skl_parse_uuids().
Signed-off-by: NSenthilnathan Veppur <senthilnathanx.veppur@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Topology manifest gives information about the libraries to be
loaded. Implement the topology manifest load callback to get
this.
Signed-off-by: NKranthi G <gudishax.kranthikumar@intel.com>
Signed-off-by: NSenthilnathan Veppur <senthilnathanx.veppur@intel.com>
Signed-off-by: NRamesh Babu <ramesh.babu@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The DSP instance creation also loads the firmware on DSPs. For library load
the firmware names come from topology so can't be loaded at object creation.

So split the firmware load and object creation. FW load is now called after
topology init in platform probe.
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

To query the ops used for a platform, we use skl_get_dsp_ops() which return
index and then we load the ops.

Rather than this return the ops, this way it cna be used later to query the
ops in rest of the driver.
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Since we are moving DSP init to later, at the topology load the
module info is not available.

So set the module id to -1 at init and query at first module
initialization.
Signed-off-by: NSenthilnathan Veppur <senthilnathanx.veppur@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

One of the machines has ALC255 on it, another one has ALC298 on it.

On the machine with the codec ALC298, it also has the speaker volume
problem, so we add the fixup chained to ALC298_FIXUP_SPK_VOLUME rather
than adding a group of pin definition in the pin quirk table, since
the speak volume problem does not happen on other machines yet.

Cc: <stable@vger.kernel.org>
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

krealloc() doesn't work always properly with __GFP_ZERO flag as
expected.  For clearing the reallocated area, we need to clear
explicitly instead.
Reported-by: NJoe Perches <joe@perches.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This commit fixes garbled audio on Bonaire HDMI
Signed-off-by: NMaruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

commit 3c8f7710 ("ASoC: fix broken pxa SoC support") has removed
the SND_ARM dependency from SND_PXA2XX_LIB and SND_PXA2XX_LIB_AC97,
by moving these config entries outside of the "if SND_ARM ... endif"
construct.

However, by placing these 2 symbols right between the SND_ARM
menuconfig definition and the first SND_ARM menu entry, the side
effect is that the SND_ARM menu becomes empty and all the config
entries caught between "if SND_ARM ... endif" no more belong to
menuconfig SND_ARM, but to its parent (menuconfig SND).

Fix this.
Signed-off-by: NEugeniu Rosca <rosca.eugeniu@gmail.com>
Acked-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

On Acer Veriton machines, codec with subsystem-id 0x1b0a01b8 the port at
0x15 is configured by default as an Internal Speaker (0x90170120).
However, no physical is speaker installed on-board. This patch adds a quirk
which disables the physical connection on this pin.

BugLink: https://bugs.launchpad.net/bugs/1607647Signed-off-by: NShrirang Bagul <shrirang.bagul@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We have a Dell AIO on which we can't adjust its speaker's volume.
The problem is it is connected to a Audio Output node without Amp-out
capability. To fix it, we change it to be connnected to a node with
Amp-out capability.

Cc: <stable@vger.kernel.org>
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>