rdma_dev_addr contains the net namespace pointer, while referring
bound_dev_if of the rdma_dev_addr, refer to the net namespace of
rdma_cm_id stored in rdma_dev_addr.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

cma_validate_port uses rdma_dev_addr to validate the port of the cm_id.
It needs to honor the net namespace which is setup during cm_id creation
when finding netdevice.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Pass the rdma_cm_id so that multiple fields of the rdma_dev_addr
structure can be accessed, instead of passing each individual fields.

This is needed to access some additional fields in followup patches.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

If valid netdevice is not found for RoCE, GID table should not be
searched with NULL netdevice.

Doing so causes the search routines to ignore the netdev argument and may
match the wrong GID table entry if the netdev is deleted.

Fixes: abae1b71 ("IB/cma: cma_validate_port should verify the port and netdevice")
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The kmalloc() failure to allocate memory generates enough information
and doesn't need to be accompanied by another driver print.

Fixes: d69a24e0 ("IB/mlx5: Move IB event processing onto a workqueue")
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Now that all callers who care about RoCE addresses have been
converted to use rdma_read_gids() simplify rdma_addr_get_sgid()
to only support real GID addresses.

Callers should only use it for OPA and IB transports.

The now deleted implementation for RoCE has several bugs related to IPv6
support and incorrect/inconsistent 'GID' addresses compared to the CM
paths.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Use the newly introduced rdma_read_gids() to read the SGID and DGID for
the connection which returns GID correctly for RoCE transport as well.

rdma_addr_get_dgid() for RoCE for client side connections returns MAC
address, instead of DGID.
rdma_addr_get_sgid() for RoCE doesn't return correct SGID for IPv6 and
when more than one IP address is assigned to the netdevice.

Therefore use transport agnostic rdma_read_gids() API provided by rdma_cm
module.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Make use of rdma_read_gids() API to read SGID and DGID which returns
correct GIDs for RoCE and other transports.

rdma_addr_get_dgid() for RoCE for client side connections returns MAC
address, instead of DGID.
rdma_addr_get_sgid() for RoCE doesn't return correct SGID for IPv6 and
when more than one IP address is assigned to the netdevice.

Therefore use transport agnostic rdma_read_gids() API provided by rdma_cm
module.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This patch introduces an API that allows legacy applications to query
GIDs for a rdma_cm_id which is used during connection establishment.

GIDs are stored and created differently for iWarp, IB and RoCE transports.
Therefore rdma_read_gids() returns GID for all the transports hiding
such internal details to caller.
It is usable for client side and server side connections.

In general continued use of GID based addressing outside of IB is
discouraged, so rdma_read_gids() should not be used by any new ULPs.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This patch does not change any functionality but makes srpt_cm_req_recv()
independent of the IB/CM and hence simplifies the patch that introduces
RDMA/CM support.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Introduce a union in struct srpt_rdma_ch for member variables that
depend on the type of connection manager. Avoid that error messages
report the IB/CM ID.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

If a receive I/O context is removed from the wait list and
srpt_handle_new_iu() fails to allocate a send I/O context then
re-adding the receive I/O context to the wait list can cause
reordering. Avoid this by only removing a receive I/O context
from the wait list after allocating a send I/O context succeeded.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Wait list processing only occurs if the channel state >= CH_LIVE. Hence
set the channel state to CH_LIVE before triggering wait list processing
asynchronously.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Make sure that sport->mutex is not released between the duplicate
channel check, adding a channel to the channel list and performing
the sport enabled check. Avoid that srpt_disconnect_ch() can be
invoked concurrently with the ib_send_cm_rep() call by
srpt_cm_req_recv().
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The new pr_debug() statements are useful when debugging the ib_srpt
driver.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Move a mutex lock and unlock statement from srpt_close_session()
into srpt_disconnect_ch_sync(). Since the previous patch removed
the last user of the return value of that function, change the
return value of srpt_disconnect_ch_sync() into void.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Store initiator and target port ID's once per nexus instead of in each
channel data structure. This change simplifies the duplicate connection
check in srpt_cm_req_recv().
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Use the source GID as session name instead of the initiator port ID
from the SRP login request. The only functional change in this patch
is that it changes the session name shown in debug messages.

Note: the fifth argument that is passed to target_alloc_session() is
what the SCSI target core uses as key for lookups in the ACL (access
control list) information.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In multipathing setups where a target system is equipped with
dual-port HCAs it is useful to have one connection per target port
instead of one connection per target HCA. Hence move the connection
list (rch_list) from struct srpt_device into struct srpt_port.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Process connection requests that use another P_Key than the default
correctly.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch fixes a use-after-free issue for ch->release_done when
running the SRP protocol on top of the rdma_rxe driver.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The next patch will iterate over rch_list from a context from which
it is not allowed to block. Hence make rch_list RCU-safe.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch does not change any functionality but prepares for the patch
that adds RDMA_CM support by making the RDMA_CM patch much easier to
read.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Show all path record query parameters if a path record query fails.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Use kstrtoull() since simple_strtoull() is deprecated. This patch
improves error checking but otherwise does not change any functionality.
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

devm_ioremap_resource() already checks if the resource is NULL, so
remove the unnecessary platform_get_resource() error check.
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch maps the new page to user space applications to
allow converting a user space completion timestamp to system wall
time at the lowest possible latency cost.
By using a versioning scheme we allow compatibility between current
and future userspace libraries.
The change moves mlx5_ib_mmap_cmd enum from mlx5_ib.h to the
abi header file mlx5-abi.h.
Reviewed-by: NAlex Vesker <valex@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NFeras Daoud <ferasda@mellanox.com>
Signed-off-by: NEitan Rabin <rabin@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Adds a new page to mlx5 core containing clock info data that allows
user level applications to translate between cqe timestamp to
nanoseconds. The information stored into this page is represented
through mlx5_ib_clock_info.

In order to synchronize between kernel and user space a sequence
number is incremented at the beginning and end of each update.
An odd number means the data is being updated while an even means
the access was already done. To guarantee that the data structure
was accessed atomically user will:

repeat:
        seq1 = <read sequence>
        goto <repeate> while odd
        <read data structure>
        seq2 = <read sequence>
        if seq1 != seq2 goto repeat
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Reviewed-by: NAlex Vesker <valex@mellanox.com>
Signed-off-by: NFeras Daoud <ferasda@mellanox.com>
Signed-off-by: NEitan Rabin <rabin@mellanox.com>
Signed-off-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

polling the completion queue directly does not interfere
with the existing polling logic, hence drop the requirement.
Be aware that running ib_process_cq_direct with non IB_POLL_DIRECT
CQ may trigger concurrent CQ processing.

This can be used for polling mode ULPs.

Cc: Bart Van Assche <bart.vanassche@wdc.com>
Reported-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
[maxg: added wcs array argument to __ib_process_cq]
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

No need to initialize completion and WR in case we fail
during QP modification.
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com>
Acked-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

rxe_qp_cleanup() can sleep so it must be run in thread context and
not in atomic context. This patch avoids that the following bug is
triggered:

Kernel BUG at 00000000560033f3 [verbose debug info unavailable]
BUG: sleeping function called from invalid context at net/core/sock.c:2761
in_atomic(): 1, irqs_disabled(): 0, pid: 7, name: ksoftirqd/0
INFO: lockdep is turned off.
Preemption disabled at:
[<00000000b6e69628>] __do_softirq+0x4e/0x540
CPU: 0 PID: 7 Comm: ksoftirqd/0 Not tainted 4.15.0-rc7-dbg+ #4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
Call Trace:
 dump_stack+0x85/0xbf
 ___might_sleep+0x177/0x260
 lock_sock_nested+0x1d/0x90
 inet_shutdown+0x2e/0xd0
 rxe_qp_cleanup+0x107/0x140 [rdma_rxe]
 rxe_elem_release+0x18/0x80 [rdma_rxe]
 rxe_requester+0x1cf/0x11b0 [rdma_rxe]
 rxe_do_task+0x78/0xf0 [rdma_rxe]
 tasklet_action+0x99/0x270
 __do_softirq+0xc0/0x540
 run_ksoftirqd+0x1c/0x70
 smpboot_thread_fn+0x1be/0x270
 kthread+0x117/0x130
 ret_from_fork+0x24/0x30
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Cc: Moni Shoua <monis@mellanox.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The rxe driver works as follows:
* The send queue, receive queue and completion queues are implemented as
  circular buffers.
* ib_post_send() and ib_post_recv() calls are serialized through a spinlock.
* Removing elements from various queues happens from tasklet
  context. Tasklets are guaranteed to run on at most one CPU. This serializes
  access to these queues. See also rxe_completer(), rxe_requester() and
  rxe_responder().
* rxe_completer() processes the skbs queued onto qp->resp_pkts.
* rxe_requester() handles the send queue (qp->sq.queue).
* rxe_responder() processes the skbs queued onto qp->req_pkts.

Since rxe_drain_req_pkts() processes qp->req_pkts, calling
rxe_drain_req_pkts() from rxe_requester() is racy. Hence this patch.
Reported-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Shared receive queue (SRQ) is defined as a pool of
receive buffers shared among multiple QPs which belong
to same protection domain in a given process context.
Use of SRQ reduces the memory foot print of IB applications.

Broadcom adapters support SRQ, adding code-changes to enable
shared receive queue.
Signed-off-by: NDevesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Broadcom's adapter supports more granular statistics
to allow better understanding about the state of the
chip when data traffic is flowing.

Exposing the detailed stats to the consumer through
the standard hook available in the kverbs interface.
In order to retrieve all the information, driver
implements a firmware command.
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Depending on the OS page-table configurations, applications
may request MRs which has page size alignment other than 4K

Underlying provider driver needs to adjust its PBL boundaries
according to the incoming page boundaries in the PA list.

Adding a capability to register MRs having pages-sizes other
than 4K (Hugepages).
Signed-off-by: NSomnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The device now reports firmware version thus, removing
the hard coded values of the FW version string and
redundant fw_rev hook from sysfs. Adding code to query
firmware version from underlying device and report it
through the kernel verb to get firmware version string.
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

RoCE can be used by virtual functions (VFs) as well. Adding
code changes to allow resource reservation, initialization
and avail the resources to the RDMA applications running on
those VFs.

Currently, fifty percent of the total available resources
are reserved for PF and remaining are equally divided among
active VFs.
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The iWARP Exception Queue (IEQ) resources are not freed when a QP is
destroyed. Fix this by freeing IEQ resources when freeing QP resources.

Fixes: d3749841 ("i40iw: add files for iwarp interface")
Signed-off-by: NMustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Remove setting of rem_addr.len before calling iw_rdma_write,
iw_inline_rdma_write and rdma_read. rem_addr.len is not used in those
functions.
Signed-off-by: NMustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Currently, if the number of processed Asynchronous Event Queue (AEQ)
entries exceeds 255, they are not returned to HW for re-use. During
scale-up, the unreturned AEQ entries can grow to the max AEQ size and
cause the HW to report an AEQ overflow.

Remove the check which limits the number of processed AEQ entries returned
to HW.

Fixes: 86dbcd0f ("RDMA/i40iw: add file to handle cqp calls")
Signed-off-by: NSindhu Devale <sindhu.devale@intel.com>
Signed-off-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>