Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 30 6月, 2009 2 次提交
    • P
      perf_counter tools: Reduce perf stat measurement overhead/skew · 051ae7f7
      由 Paul Mackerras 提交于 
      Vince Weaver reported a 'perf stat' measurement overhead in the
count of retired instructions, which can amount to a +6000
instructions inflated count in the reported count.

At present, perf stat creates its counters on the perf process.  Thus
the counters count the fork and various other activity in both the
parent and child, such as the resolver overhead for resolving PLT
entries for any libc functions that haven't been called before, such
as execvp.

This reduces the overhead by creating the counters on the child process
after the fork, using a couple of pipes to synchronize so that the
child process waits until the parent has created the counters before
doing the exec.  To eliminate the PLT resolution overhead on calling
execvp, this does a dummy execvp first which will always fail.

With this, the overhead of executing a program goes down from over
4800 instructions to about 90 instructions on powerpc (32-bit).
This was measured with a statically-linked program written in
assembler which only does the 3 instructions needed to call _exit(0).

Before:

$ perf stat -e 0:1:u ./three

 Performance counter stats for './three':

           4858  instructions

    0.001274523  seconds time elapsed

After:

$ perf stat -e 0:1:u ./three

 Performance counter stats for './three':

             92  instructions

    0.000468153  seconds time elapsed
Reported-by: NVince Weaver <vince@deater.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <19016.41425.814043.870352@cargo.ozlabs.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      051ae7f7
    • I
      perf stat: Use percentages for scaling output · 210ad39f
      由 Ingo Molnar 提交于 
      Peter expressed a strong preference for percentage based
display of scaled values - so revert to that from the
recently introduced multiplication-factor unit.
Reported-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jaswinder Singh Rajput <jaswinder@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      210ad39f
  3. 29 6月, 2009 1 次提交
  5. 28 6月, 2009 2 次提交
    • J
      perf stat: Micro-optimize the code: memcpy is only required if no event is selected and !null_run · c3043569
      由 Jaswinder Singh Rajput 提交于 
      Set attrs and nr_counters if no event is selected and !null_run.

Setting of attrs should depend on number of counters,
so we need to memcpy only for sizeof(default_attrs)

Also set nr_counters as ARRAY_SIZE(default_attrs) in place of
hardcoded value.
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1246126749.32198.16.camel@hpdv5.satnam>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      c3043569
    • J
      perf stat: Improve output · 6e750a8f
      由 Jaswinder Singh Rajput 提交于 
      Increase size for event name to handle bigger names like
'L1-d$-prefetch-misses'

Changed scaled counters from percentage to a multiplicative
factor because the latter is more expressive.

Also aligned the scaling factor, otherwise sometimes it looks
like:

            384  iTLB-load-misses           (4.74x scaled)
         452029  branch-loads               (8.00x scaled)
           5892  branch-load-misses         (20.39x scaled)
         972315  iTLB-loads                 (3.24x scaled)

Before:
         150708  L1-d$-stores          (scaled from 23.57%)
         428804  L1-d$-prefetches      (scaled from 23.47%)
         314446  L1-d$-prefetch-misses  (scaled from 23.42%)
      252626137  L1-i$-loads           (scaled from 23.24%)
        5297550  dTLB-load-misses      (scaled from 23.96%)
      106992392  branch-loads          (scaled from 23.67%)
        5239561  branch-load-misses    (scaled from 23.43%)

After:
        1731713  L1-d$-loads               (  14.25x scaled)
          44241  L1-d$-prefetches          (   3.88x scaled)
          21076  L1-d$-prefetch-misses     (   3.40x scaled)
        5789421  L1-i$-loads               (   3.78x scaled)
          29645  dTLB-load-misses          (   2.95x scaled)
         461474  branch-loads              (   6.52x scaled)
           7493  branch-load-misses        (  26.57x scaled)
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1246051927.2988.10.camel@hpdv5.satnam>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      6e750a8f
  7. 27 6月, 2009 3 次提交
    • I
      perf stat: Fix multi-run stats · 566747e6
      由 Ingo Molnar 提交于 
      In multi-run (-r/--repeat) printouts, print out the noise of
the wall-clock average as well.

Also, fix a bug in printing out scaled counters: if it was not
scaled then we should not update the average with -1.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      566747e6
    • I
      perf stat: Add -n/--null option to run without counters · 0cfb7a13
      由 Ingo Molnar 提交于 
      Allow a no-counters run. This can be useful to measure just
elapsed wall-clock time - or to assess the raw overhead of perf
stat itself, without running any counters.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      0cfb7a13
    • I
      perf_counter tools: Remove dead code · fde953c1
      由 Ingo Molnar 提交于 
      Vince Weaver reported that there's a handful of #ifdef __MINGW32__
sections in the code.

Remove them as they are in essence dead code - as unlike upstream
Git, the perf tool is unlikely to be ported to Windows.
Reported-by: NVince Weaver <vince@deater.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      fde953c1
  9. 26 6月, 2009 14 次提交
  11. 25 6月, 2009 4 次提交
    • J
      perf_counter tools: Shorten names for events · e5c59547
      由 Jaswinder Singh Rajput 提交于 
      Added new alias for events.

On AMD box:

 $ ./perf stat -e l1d -e l1d-misses -e l1d-write -e l1d-prefetch -e l1d-prefetch-miss -e l1i -e l1i-misses -e l1i-prefetch -e l2 -e l2-misses -e l2-write -e dtlb -e dtlb-misses -e itlb -e itlb-misses -e bpu -e bpu-misses -- ls -lR /usr/include/ > /dev/null

Before :

 Performance counter stats for 'ls -lR /usr/include/':

      248064467  L1-data-Cache-Load-Referencees  (scaled from 23.27%)
        1001433  L1-data-Cache-Load-Misses  (scaled from 23.34%)
         153691  L1-data-Cache-Store-Referencees  (scaled from 23.34%)
         423248  L1-data-Cache-Prefetch-Referencees  (scaled from 23.33%)
         302138  L1-data-Cache-Prefetch-Misses  (scaled from 23.25%)
      251217546  L1-instruction-Cache-Load-Referencees  (scaled from 23.25%)
        5757005  L1-instruction-Cache-Load-Misses  (scaled from 23.23%)
          93435  L1-instruction-Cache-Prefetch-Referencees  (scaled from 23.24%)
        6496073  L2-Cache-Load-Referencees  (scaled from 23.32%)
         609485  L2-Cache-Load-Misses  (scaled from 23.45%)
        6876991  L2-Cache-Store-Referencees  (scaled from 23.71%)
      248922840  Data-TLB-Cache-Load-Referencees  (scaled from 23.94%)
        5828386  Data-TLB-Cache-Load-Misses  (scaled from 24.17%)
      257613506  Instruction-TLB-Cache-Load-Referencees  (scaled from 24.20%)
           6833  Instruction-TLB-Cache-Load-Misses  (scaled from 23.88%)
      109043606  Branch-Cache-Load-Referencees  (scaled from 23.64%)
        5552296  Branch-Cache-Load-Misses  (scaled from 23.42%)

    0.413702461  seconds time elapsed.

After :

 Peformance counter stats for 'ls -lR /usr/include/':

      266590464  L1-d$-loads           (scaled from 23.03%)
        1222273  L1-d$-load-misses     (scaled from 23.58%)
         146204  L1-d$-stores          (scaled from 23.83%)
         406344  L1-d$-prefetches      (scaled from 24.09%)
         283748  L1-d$-prefetch-misses (scaled from 24.10%)
      249650965  L1-i$-loads           (scaled from 23.80%)
        3353961  L1-i$-load-misses     (scaled from 23.82%)
         104599  L1-i$-prefetches      (scaled from 23.68%)
        4836405  LLC-loads             (scaled from 23.67%)
         498214  LLC-load-misses       (scaled from 23.66%)
        4953994  LLC-stores            (scaled from 23.64%)
      243354097  dTLB-loads            (scaled from 23.77%)
        6468584  dTLB-load-misses      (scaled from 23.74%)
      249719549  iTLB-loads            (scaled from 23.25%)
           5060  iTLB-load-misses      (scaled from 23.00%)
      112343016  branch-loads          (scaled from 22.76%)
        5528876  branch-load-misses    (scaled from 22.54%)

    0.427154051  seconds time elapsed.

Reported-by : Ingo Molnar <mingo@elte.hu>
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245934522.5308.39.camel@hpdv5.satnam>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      e5c59547
    • J
      perf_counter tools: Check for valid cache operations · 06813f6c
      由 Jaswinder Singh Rajput 提交于 
      Made new table for cache operartion stat 'hw_cache_stat' as:

 L1I : Read and prefetch only
 ITLB and BPU : Read-only

introduce is_cache_op_valid() for cache operation validity

And checks for valid cache operations.

Reported-by : Ingo Molnar <mingo@elte.hu>
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245930367.5308.33.camel@localhost.localdomain>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      06813f6c
    • J
      perf record: Fix filemap pathname parsing in /proc/pid/maps · 76c64c5e
      由 Johannes Weiner 提交于 
      Looking backward for the first space from the end of a line in
/proc/pid/maps does not find the start of the pathname of the mapped
file if it contains a space.

Since the only slashes we have in this file occur in the (absolute!)
pathname column of file mappings, looking for the first slash in a
line is a safe method to find the name.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090624190835.GA25548@cmpxchg.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      76c64c5e
    • I
      perf_counter tools: Add CREDITS file for Git contributors · 1b173f77
      由 Ingo Molnar 提交于 
      Much of perf's libraries comes from the Git project. I noticed
that the files (in tools/perf/util/*.[ch] and elsewhere) are
quite spartan wrt. credits, so lets add a CREDITS file that
includes an (incomplete!) list of main contributors.

Thanks guys, these libraries are really useful. Special thanks
go to Johannes Schindelin and Junio C Hamano for coming up with
this list.
List-Composed-By: NJohannes Schindelin <Johannes.Schindelin@gmx.de>
Cc: Junio C Hamano <gitster@pobox.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      1b173f77
  13. 24 6月, 2009 4 次提交
    • J
      perf stat: Remove dead code · 3d632595
      由 Jaswinder Singh Rajput 提交于 
      Remove dead code and do some code alignment.
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245847774.2681.2.camel@ht.satnam>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      3d632595
    • Y
      perf_counter, x86: Set global control MSR correctly · c14dab5c
      由 Yong Wang 提交于 
      Previous code made an assumption that the power on value of global
control MSR has enabled all fixed and general purpose counters properly.

However, this is not the case for certain Intel processors, such as
Atom - and it might also be firmware dependent.

Each enable bit in IA32_PERF_GLOBAL_CTRL is AND'ed with the
enable bits for all privilege levels in the respective IA32_PERFEVTSELx
or IA32_PERF_FIXED_CTR_CTRL MSRs to start/stop the counting of
respective counters. Counting is enabled if the AND'ed results is true;
counting is disabled when the result is false.

The end result is that all fixed counters are always disabled on Atom
processors because the assumption is just invalid.

Fix this by not initializing the ctrl-mask out of the global MSR,
but setting it to perf_counter_mask.
Reported-by: NStephane Eranian <eranian@googlemail.com>
Signed-off-by: NYong Wang <yong.y.wang@intel.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20090624021324.GA2788@ywang-moblin2.bj.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      c14dab5c
    • R
      perf_counter tools: Fix strbuf_fread() error path handling · f7679dab
      由 Roel Kluin 提交于 
      size_t res cannot be less than 0 - fread returns 0 on error.

[ Updated by: René Scharfe <rene.scharfe@lsrfire.ath.cx> ]
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Junio C Hamano <gitster@pobox.com>
LKML-Reference: <4A3FB479.2090902@lsrfire.ath.cx>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      f7679dab
    • J
      perf stat: Fix verbose for perf stat · cca03c0a
      由 Jaswinder Singh Rajput 提交于 
      Error message should use stderr for verbose (-v), otherwise
message will be lost for:

 $ ./perf stat -v <cmd>  > /dev/null

For example on AMD bus-cycles event is not available so now
it looks like:

 $ ./perf stat -v -e bus-cycles ls > /dev/null
Error: counter 0, sys_perf_counter_open() syscall returned with -1 (Invalid argument)

 Performance counter stats for 'ls':

  <not counted>  bus-cycles

    0.006765877  seconds time elapsed.
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1245757369.3776.1.camel@localhost.localdomain>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      cca03c0a
  15. 23 6月, 2009 6 次提交
  17. 22 6月, 2009 4 次提交