Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
接近 2 年 前同步成功

通知 170
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 22 5月, 2015 11 次提交
  3. 19 5月, 2015 1 次提交
  5. 29 4月, 2015 1 次提交
  7. 15 4月, 2015 1 次提交
    • R
      ACPICA: Store GPE register enable masks upfront · 0ee0d349
      由 Rafael J. Wysocki 提交于 
      It is reported that ACPI interrupts do not work any more on
Dell Latitude D600 after commit c50f13c6 (ACPICA: Save
current masks of enabled GPEs after enable register writes).
The problem turns out to be related to the fact that the
enable_mask and enable_for_run GPE bit masks are not in
sync (in the absence of any system suspend/resume events)
for at least one GPE register on that machine.

Address this problem by writing the enable_for_run mask into
enable_mask as soon as enable_for_run is updated instead of
doing that only after the subsequent register write has
succeeded.  For consistency, update acpi_hw_gpe_enable_write()
to store the bit mask to be written into the GPE register
in enable_mask unconditionally before the write.

Since the ACPI_GPE_SAVE_MASK flag is not necessary any more after
that, drop it along with the symbols depending on it.
Reported-and-tested-by: NJim Bos <jim876@xs4all.nl>
Fixes: c50f13c6 (ACPICA: Save current masks of enabled GPEs after enable register writes)
Cc: 3.19+ <stable@vger.kernel.org> # 3.19+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      0ee0d349
  9. 14 4月, 2015 8 次提交
  11. 26 3月, 2015 1 次提交
  13. 25 3月, 2015 1 次提交
  15. 18 3月, 2015 1 次提交
  17. 17 3月, 2015 1 次提交
  19. 13 2月, 2015 1 次提交
  21. 05 2月, 2015 4 次提交
    • L
      ACPICA: Events: Introduce ACPI_GPE_DISPATCH_RAW_HANDLER to fix 2 issues for the current GPE APIs · 0d0988af
      由 Lv Zheng 提交于 
      ACPICA commit 199cad16530a45aea2bec98e528866e20c5927e1

Since whether the GPE should be disabled/enabled/cleared should only be
determined by the GPE driver's state machine:
1. GPE should be disabled if the driver wants to switch to the GPE polling
   mode when a GPE storm condition is indicated and should be enabled if
   the driver wants to switch back to the GPE interrupt mode when all of
   the storm conditions are cleared. The conditions should be protected by
   the driver's specific lock.
2. GPE should be enabled if the driver has accepted more than one request
   and should be disabled if the driver has completed all of the requests.
   The request count should be protected by the driver's specific lock.
3. GPE should be cleared either when the driver is about to handle an edge
   triggered GPE or when the driver has completed to handle a level
   triggered GPE. The handling code should be protected by the driver's
   specific lock.
Thus the GPE enabling/disabling/clearing operations are likely to be
performed with the driver's specific lock held while we currently cannot do
this. This is because:
1. We have the acpi_gbl_gpe_lock held before invoking the GPE driver's
   handler. Driver's specific lock is likely to be held inside of the
   handler, thus we can see some dead lock issues due to the reversed
   locking order or recursive locking. In order to solve such dead lock
   issues, we need to unlock the acpi_gbl_gpe_lock before invoking the
   handler. BZ 1100.
2. Since GPE disabling/enabling/clearing should be determined by the GPE
   driver's state machine, we shouldn't perform such operations inside of
   ACPICA for a GPE handler to mess up the driver's state machine. BZ 1101.

Originally this patch includes a logic to flush GPE handlers, it is dropped
due to the following reasons:
1. This is a different issue;
2. Linux OSL has fixed this by flushing SCI in acpi_os_wait_events_complete().
We will pick up this topic when the Linux OSL fix turns out to be not
sufficient.

Note that currently the internal operations and the acpi_gbl_gpe_lock are
also used by ACPI_GPE_DISPATCH_METHOD and ACPI_GPE_DISPATCH_NOTIFY. In
order not to introduce regressions, we add one
ACPI_GPE_DISPATCH_RAW_HANDLER type to be distiguished from
ACPI_GPE_DISPATCH_HANDLER. For which the acpi_gbl_gpe_lock is unlocked before
invoking the GPE handler and the internal enabling/disabling operations are
bypassed to allow drivers to perform them at a proper position using the
GPE APIs and ACPI_GPE_DISPATCH_RAW_HANDLER users should invoke acpi_set_gpe()
instead of acpi_enable_gpe()/acpi_disable_gpe() to bypass the internal GPE
clearing code in acpi_enable_gpe(). Lv Zheng.

Known issues:
1. Edge-triggered GPE lost for frequent enablings
   On some buggy silicon platforms, GPE enable line may not be directly
   wired to the GPE trigger line. In that case, when GPE enabling is
   frequently performed for edge-triggered GPEs, GPE status may stay set
   without being triggered.
   This patch may maginify this problem as it allows GPE enabling to be
   parallel performed during the process the GPEs are handled.
   This is an existing issue, because:
   1. For task context:
      Current ACPI_GPE_DISPATCH_METHOD practices have proven that this
      isn't a real issue - we can re-enable edge-triggered GPE in a work
      queue where the GPE status bit might already be set.
   2. For IRQ context:
      This can even happen when the GPE enabling occurs before returning
      from the GPE handler and after unlocking the GPE lock.
   Thus currently no code is included to protect this.

Link: https://github.com/acpica/acpica/commit/199cad16Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      0d0988af
    • D
      ACPICA: Update version to 20150204 · 121b7d91
      由 David E. Box 提交于 
      ACPICA commit e06b1624b02dc8317d144e9a6fe9d684c5fa2f90

Version 20150204.

Link: https://github.com/acpica/acpica/commit/e06b1624Signed-off-by: NDavid E. Box <david.e.box@linux.intel.com>
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      121b7d91
    • D
      ACPICA: Update Copyright headers to 2015 · 82a80941
      由 David E. Box 提交于 
      ACPICA commit 8990e73ab2aa15d6a0068b860ab54feff25bee36

Link: https://github.com/acpica/acpica/commit/8990e73aSigned-off-by: NDavid E. Box <david.e.box@linux.intel.com>
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      82a80941
    • L
      ACPICA: Events: Cleanup GPE dispatcher type obtaining code · 7c43312a
      由 Lv Zheng 提交于 
      ACPICA commit 7926d5ca9452c87f866938dcea8f12e1efb58f89

There is an issue in acpi_install_gpe_handler() and acpi_remove_gpe_handler().
The code to obtain the GPE dispatcher type from the Handler->original_flags
is wrong:
    if (((Handler->original_flags & ACPI_GPE_DISPATCH_METHOD) ||
         (Handler->original_flags & ACPI_GPE_DISPATCH_NOTIFY)) &&
ACPI_GPE_DISPATCH_NOTIFY is 0x03 and ACPI_GPE_DISPATCH_METHOD is 0x02, thus
this statement is TRUE for the following dispatcher types:
    0x01 (ACPI_GPE_DISPATCH_HANDLER): not expected
    0x02 (ACPI_GPE_DISPATCH_METHOD): expected
    0x03 (ACPI_GPE_DISPATCH_NOTIFY): expected

There is no functional issue due to this because Handler->original_flags is
only set in acpi_install_gpe_handler(), and an earlier checker has excluded
the ACPI_GPE_DISPATCH_HANDLER:
    if ((gpe_event_info->Flags & ACPI_GPE_DISPATCH_MASK) ==
            ACPI_GPE_DISPATCH_HANDLER)
    {
        Status = AE_ALREADY_EXISTS;
        goto free_and_exit;
    }
    ...
    Handler->original_flags = (u8) (gpe_event_info->Flags &
        (ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK));

We need to clean this up before modifying the GPE dispatcher type values.

In order to prevent such issue from happening in the future, this patch
introduces ACPI_GPE_DISPATCH_TYPE() macro to be used to obtain the GPE
dispatcher types. Lv Zheng.

Link: https://github.com/acpica/acpica/commit/7926d5caSigned-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NDavid E. Box <david.e.box@linux.intel.com>
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      7c43312a
  23. 29 1月, 2015 1 次提交
  25. 26 1月, 2015 2 次提交
  27. 06 1月, 2015 1 次提交
    • H
      ACPI / processor: Convert apic_id to phys_id to make it arch agnostic · af8f3f51
      由 Hanjun Guo 提交于 
      apic_id in MADT table is the CPU hardware id which identify
it self in the system for x86 and ia64, OSPM will use it for
SMP init to map APIC ID to logical cpu number in the early
boot, when the DSDT/SSDT (ACPI namespace) is scanned later, the
ACPI processor driver is probed and the driver will use acpi_id
in DSDT to get the apic_id, then map to the logical cpu number
which is needed by the processor driver.

Before ACPI 5.0, only x86 and ia64 were supported in ACPI spec,
so apic_id is used both in arch code and ACPI core which is
pretty fine. Since ACPI 5.0, ARM is supported by ACPI and
APIC is not available on ARM, this will confuse people when
apic_id is both used by x86 and ARM in one function.

So convert apic_id to phys_id (which is the original meaning)
in ACPI processor dirver to make it arch agnostic, but leave the
arch dependent code unchanged, no functional change.
Signed-off-by: NHanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      af8f3f51
  29. 13 12月, 2014 1 次提交
  31. 04 12月, 2014 1 次提交
  33. 02 12月, 2014 1 次提交
    • R
      ACPICA: Save current masks of enabled GPEs after enable register writes · c50f13c6
      由 Rafael J. Wysocki 提交于 
      There is a race condition between acpi_hw_disable_all_gpes() or
acpi_enable_all_wakeup_gpes() and acpi_ev_asynch_enable_gpe() such
that if the latter wins the race, it may mistakenly enable a GPE
disabled by the former.  This may lead to premature system wakeups
during system suspend and potentially to more serious consequences.

The source of the problem is how acpi_hw_low_set_gpe() works when
passed ACPI_GPE_CONDITIONAL_ENABLE as the second argument.  In that
case, the GPE will be enabled if the corresponding bit is set in the
enable_for_run mask of the GPE enable register containing that bit.
However, acpi_hw_disable_all_gpes() and acpi_enable_all_wakeup_gpes()
don't modify the enable_for_run masks of GPE registers when writing
to them.  In consequence, if acpi_ev_asynch_enable_gpe(), which
eventually calls acpi_hw_low_set_gpe() with the second argument
equal to ACPI_GPE_CONDITIONAL_ENABLE, is executed in parallel with
one of these functions, it may reverse changes made by them.

To fix the problem, introduce a new enable_mask field in struct
acpi_gpe_register_info in which to store the current mask of
enabled GPEs and modify acpi_hw_low_set_gpe() to take this
mask into account instead of enable_for_run when its second
argument is equal to ACPI_GPE_CONDITIONAL_ENABLE.  Also modify
the low-level routines called by acpi_hw_disable_all_gpes(),
acpi_enable_all_wakeup_gpes() and acpi_enable_all_runtime_gpes()
to update the enable_mask masks of GPE registers after all
(successful) writes to those registers.
Acked-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      c50f13c6
  35. 28 11月, 2014 2 次提交