- 05 2月, 2011 1 次提交
-
-
There is a tiny difference between PPC32 and PPC64. Microblaze uses the PPC32 variant. Signed-off-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc> [grant.likely@secretlab.ca: Added comment to #endif, moved documentation block to function implementation, fixed for non ppc and microblaze compiles] Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 21 1月, 2011 31 次提交
-
-
由 Thomas Gleixner 提交于
No functional change. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Thomas Gleixner 提交于
All architectures are finally converted. Remove the cruft. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Mike Frysinger <vapier@gentoo.org> Cc: David Howells <dhowells@redhat.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Michal Simek <monstr@monstr.eu> Acked-by: NDavid Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jeff Dike <jdike@addtoit.com>
-
由 Scott Wood 提交于
Don't say that enable timed out when it was disable, and show which IRQ had the problem. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Nishanth Aravamudan 提交于
Upcoming servers will include a Broadcom NIC, add to the defconfig to increase testing coverage and make sure mainline builds come up with networking. Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
- Enable 64kB pages so it gets some regular testing. - The largest POWER7 has 1024 threads so bump NR_CPUS it to match. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
IRQSOFF_TRACER and STACK_TRACER force the kernel to be built with -pg which is a substantial overhead. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Ben Hutchings 提交于
The dts-installed variable is initialised using a wildcard path that will be expanded relative to the build directory. Use the existing variable dtstree to generate an absolute wildcard path that will work when building in a separate directory. Reported-by: NGerhard Pircher <gerhard_pircher@gmx.net> Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Tested-by: Gerhard Pircher <gerhard_pircher@gmx.net> [against 2.6.32] Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
Decoding machine checks is CPU specific and so machine_check_generic doesn't do the right thing on 64bit chips. Luckily we never call into this code because we call ppc_md.machine_check_exception instead if available. Since we check cur_cpu_spec->machine_check before calling it, we may as well remove machine_check_generic from 64bit archs. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
The spec suggests we should first check the extended log flag before checking the length field. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
The FWNMI code uses a global buffer without any locks to read the RTAS error information. If two CPUs take a machine check at once then we will corrupt this buffer. Since most FWNMI rtas messages are not of the extended type, we can create a 64bit percpu buffer and use it where possible. If we do receive an extended RTAS log then we fall back to the old behaviour of using the global buffer. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
Rework pseries machine check handler: - If MSR_RI isn't set, we cannot recover even if the machine check was fully recovered - Rename nonfatal to recovered - Handle RTAS_DISP_LIMITED_RECOVERY - Use BUS_MCEERR_AR instead of BUS_ADRERR - Don't check all the RTAS error log fields when receiving a synchronous machine check. Recent versions of the pseries firmware do not fill them in during a machine check and instead send a follow up error log with the detailed information. If we see a synchronous machine check, and we came from userspace then kill the task. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
If a machine check comes from userspace we send a SIGBUS to the task and fail to printk anything. If we are taking machine checks due to bad hardware we want to know about it right away. Furthermore if we don't complain loudly then it will look a lot like a bug in the userspace application, potentially causing a lot of confusion. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
We are calling debugger_fault_handler twice in machine_check_exception. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
Newer versions of the System p firwmare send a partial RTAS error log in the machine check handler with a more detailed response appearing sometime later via check event. This means at machine check time we do not have enough information to ascertain exactly what went on. Furthermore, I have found the RTAS error logs in the machine check handler contain no useful information, so halting on them makes little sense. If we want to halt it would make more sense to do it following the error log received sometime later via check event. In light of this, never halt the error log in the pseries machine check handler. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
We should never force MSR_RI on. If we take a machine check with MSR_RI off then we have no chance of recovering safely. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
We were printing 64 bits of DSISR in show_regs even though it is 32 bit. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
We should disable ftrace during kexec, some of the tracers are very invasive and we do not want them going off while doing the low level work of swapping one kernel out for another. This mirrors what we do on x86. Even though we cannot return from a kexec on powerpc (since we do not implement CONFIG_KEXEC_JUMP), add the restore code in case we do one day. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
Use the crash handler hooks to run the SPU stop code, just like we do for ehea and cell RAS code. While I'm here I noticed "CPUSs reliabally" so fix the spelling MISTAKESs reliabally. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
We check for a valid handler before calling ppc_md.machine_kexec_prepare so we can just remove these empty handlers. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
There's no need to initialise ppc_md.machine_kexec and ppc_md.machine_kexec_prepare to the default handlers. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
No one uses ppc_md.machine_crash_shutdown, so remove it. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
No one uses ppc_md.machine_kexec, so remove it. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
No one uses ppc_md.machine_kexec_cleanup, so remove it. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
Move all the kexec handlers together. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Tejun Heo 提交于
With cmwq, there's no reason to use a separate workqueue in cpufreq_spudemand. Use system_wq instead. The work items are already sync canceled on stop, so it's already guaranteed that no work is running when spu_gov_exit() is entered. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linuxppc-dev@lists.ozlabs.org Cc: Dave Jones <davej@redhat.com> Cc: cpufreq@vger.kernel.org Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Akinobu Mita 提交于
Simplify read file operation for /proc/powerpc/rtas/* interface by using simple_read_from_buffer. Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Akinobu Mita 提交于
Simplify several write fileoperations for spufs by using simple_write_to_buffer(). Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Steven Rostedt 提交于
32-bit variant of the previous patch for 64-bit: << When an interrupt occurs in userspace, we can call trace_hardirqs_on/off() With one level stack. But if we have irqsoff tracing enabled, it checks both CALLER_ADDR0 and CALLER_ADDR1. The second call goes two stack frames up. If this is from user space, then there may not exist a second stack.... >> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Steven Rostedt 提交于
When an interrupt occurs in userspace, we can call trace_hardirqs_on/off() With one level stack. But if we have irqsoff tracing enabled, it checks both CALLER_ADDR0 and CALLER_ADDR1. The second call goes two stack frames up. If this is from user space, then there may not exist a second stack. Add a second stack when calling trace_hardirqs_on/off() otherwise the following oops might occur: Oops: Kernel access of bad area, sig: 11 [#1] PREEMPT SMP NR_CPUS=2 PA Semi PWRficient last sysfs file: /sys/block/sda/size Modules linked in: ohci_hcd ehci_hcd usbcore NIP: c0000000000e1c00 LR: c0000000000034d4 CTR: 000000011012c440 REGS: c00000003e2f3af0 TRAP: 0300 Not tainted (2.6.37-rc6+) MSR: 9000000000001032 <ME,IR,DR> CR: 48044444 XER: 20000000 DAR: 00000001ffb9db50, DSISR: 0000000040000000 TASK = c00000003e1a00a0[2088] 'emacs' THREAD: c00000003e2f0000 CPU: 1 GPR00: 0000000000000001 c00000003e2f3d70 c00000000084e0d0 c0000000008816e8 GPR04: 000000001034c678 000000001032e8f9 0000000010336540 0000000040020000 GPR08: 0000000040020000 00000001ffb9db40 c00000003e2f3e30 0000000060000000 GPR12: 100000000000f032 c00000000fff0280 000000001032e8c9 0000000000000008 GPR16: 00000000105be9c0 00000000105be950 00000000105be9b0 00000000105be950 GPR20: 00000000ffb9dc50 00000000ffb9dbf0 00000000102f0000 00000000102f0000 GPR24: 00000000102e0000 00000000102f0000 0000000010336540 c0000000009ded38 GPR28: 00000000102e0000 c0000000000034d4 c0000000007ccb10 c00000003e2f3d70 NIP [c0000000000e1c00] .trace_hardirqs_off+0xb0/0x1d0 LR [c0000000000034d4] decrementer_common+0xd4/0x100 Call Trace: [c00000003e2f3d70] [c00000003e2f3e30] 0xc00000003e2f3e30 (unreliable) [c00000003e2f3e30] [c0000000000034d4] decrementer_common+0xd4/0x100 Instruction dump: 81690000 7f8b0000 419e0018 f84a0028 60000000 60000000 60000000 e95f0000 80030000 e92a0000 eb6301f8 2f800000 <eb890010> 41fe00dc a06d000a eb1e8050 ---[ end trace 4ec7fd2be9240928 ]--- Reported-by: NJoerg Sommer <joerg@alea.gnuu.de> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
When we create an alternative feature section, the else case must be the same size or smaller than the body. This is because when we patch the else case in we just overwrite the body, so there must be room. Up to now we just did this by inspection, but it's quite easy to enforce it in the assembler, so we should. The only change is to add the ifgt block, but that effects the alignment of the tabs and so the whole macro is modified. Also add a test, but #if 0 it because we don't want to break the build. Anyone who's modifying the feature macros should enable the test. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 David Rientjes 提交于
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: NIngo Molnar <mingo@elte.hu> Acked-by: NDavid Woodhouse <david.woodhouse@intel.com> Signed-off-by: NDavid Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 1月, 2011 2 次提交
-
-
由 Anton Blanchard 提交于
When fixing the frequency calculations for perf on powerpc I forgot to fix the FSL version. If we dont set event->hw.last_period the frequency to period calculations in perf go haywire and we continually throttle/unthrottle the PMU. Signed-off-by: NAnton Blanchard <anton@samba.org> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Scott Wood <scottwood@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: linuxppc-dev@lists.ozlabs.org Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20110118214404.2f42e634@kryten> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Grant Likely 提交于
Commit a4f740cf, "of/flattree: Add of_flat_dt_match() helper function" introduced build failures in arch/powerpc/platform/83xx by mistyping 'static' as 'struct' in the compatible string list, and omitting a few semicolons. This patch fixes it. Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 17 1月, 2011 1 次提交
-
-
由 Anton Blanchard 提交于
When profiling a benchmark that is almost 100% userspace, I noticed some wildly inaccurate profiles that showed almost all time spent in the kernel. Closer examination shows we were programming a tiny number of cycles into the PMU after each overflow (about ~200 away from the next overflow). This gets us stuck in a loop which we eventually break out of by throttling the PMU (there are regular throttle/unthrottle events in the log). It looks like we aren't setting event->hw.last_period to something same and the frequency to period calculations in perf are going haywire. With the following patch we find the correct period after a few interrupts and stay there. I also see no more throttle events. Signed-off-by: NAnton Blanchard <anton@samba.org> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> LKML-Reference: <20110117161742.5feb3761@kryten> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 16 1月, 2011 1 次提交
-
-
由 Grant Likely 提交于
The physical address is never used by the device tree code when allocating memory for unflattening. Change the architecture's alloc hook to return the virutal address instead. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 14 1月, 2011 2 次提交
-
-
由 Andrea Arcangeli 提交于
Alter compound get_page/put_page to keep references on subpages too, in order to allow __split_huge_page_refcount to split an hugepage even while subpages have been pinned by one of the get_user_pages() variants. Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com> Acked-by: NRik van Riel <riel@redhat.com> Acked-by: NMel Gorman <mel@csn.ul.ie> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Thomas Taranowski 提交于
In fsl_rio_dbell_handler() the code currently simply acknowledges the QFI queue full interrupt, but does nothing to resolve the queue full condition. Instead, it jumps to the end of the isr. When a queue full condition occurs, the isr is then re-entered immediately and continually, forever. The fix is to just fall through and read out current doorbell entries. Signed-off-by: NThomas Taranowski <tom@baringforge.com> Cc: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Thomas Moll <thomas.moll@sysgo.com> Cc: Micha Nelissen <micha@neli.hopto.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 1月, 2011 2 次提交
-
-
由 Timur Tabi 提交于
Fix the warnings genereted by arch/powerpc/include/asm/immap_qe.h when CONFIG_PHYS_ADDR_T_64BIT is defined: immap_qe.h: In function 'immrbar_virt_to_phys': immap_qe.h:472:8: warning: cast from pointer to integer of different size immap_qe.h:472:24: warning: cast from pointer to integer of different size immap_qe.h:473:5: warning: cast from pointer to integer of different size immap_qe.h:473:21: warning: cast from pointer to integer of different size immap_qe.h:474:36: warning: cast from pointer to integer of different size Note that the QE does not support 36-bit physical addresses, so even when CONFIG_PHYS_ADDR_T_64BIT is defined, the QE MURAM must be located below the 4GB boundary. Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Timur Tabi 提交于
In order to prevent the fsl_dma driver from claiming the DMA channels that the P1022DS audio driver needs, the compatible properties for those nodes must say "fsl,ssi-dma-channel" instead of "fsl,eloplus-dma-channel". Signed-off-by: NTimur Tabi <timur@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-