Converts from using struct "class_device" to "struct device" making
everything show up properly in /sys/devices/ with symlinks from the
/sys/class directory.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Converts from using struct "class_device" to "struct device" making
everything show up properly in /sys/devices/ with symlinks from the
/sys/class directory.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Converts from using struct "class_device" to "struct device" making
everything show up properly in /sys/devices/ with symlinks from the
/sys/class directory.

Also fixes up the isdn drivers that were putting something in the class
device's directory.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This also ment that some of the misc drivers had to also be fixed
up as they were assuming the device was a class_device.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Converts from using struct "class_device" to "struct device" making
everything show up properly in /sys/devices/ with symlinks from the
/sys/class directory.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Converts from using struct "class_device" to "struct device" making
everything show up properly in /sys/devices/ with symlinks from the
/sys/class directory.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The return value of platform_device_register_simple() should be checked by
IS_ERR().

This patch also fix misc_register() error case.  Because misc_register()
returns error code.

Cc: Sebastien Bouchard <sebastien.bouchard@ca.kontron.com>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Not all graphic page remappers support physical addresses over the 4GB
mark for remapping, so while some do (the AMD64 GART always did, and I
just fixed the i965 to do so properly), we're safest off just forcing
GFP_DMA32 allocations to make sure graphics pages get allocated in the
low 32-bit address space by default.

AGP sub-drivers that really care, and can do better, could just choose
to implement their own allocator (or we could add another "64-bit safe"
default allocator for their use), but quite frankly, you're not likely
to care in practice.

So for now, this trivial change means that we won't be allocating pages
that we can't map correctly by mistake on x86-64.

[ On traditional 32-bit x86, this could never happen, because GFP_KERNEL
  would never allocate any highmem memory anyway ]
Acked-by: NAndi Kleen <ak@suse.de>
Acked-by: NDave Jones <davej@redhat.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This introduces a i965-specific "mask_memory()" function that knows
about the extended physical addresses that the i965 supports.  This
allows us to correctly map in physical memory in the >4GB range into the
GTT.

Also simplify/clean-up the i965 case for the aperture sizing by just
returning the fixed 512kB size from "fetch_size()".  We don't really
care that not all of the aperture may be visible - the only thing that
cares about the aperture size is the Intel "stolen memory" calculation,
which depends on the fixed size.

Cc: Keith Packard <keithp@keithp.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix printk format warnings:
drivers/char/ftape/zftape/zftape-buffers.c:87: warning: format '%d' expects type
'int', but argument 3 has type 'size_t'
drivers/char/ftape/zftape/zftape-buffers.c:104: warning: format '%d' expects type
 'int', but argument 3 has type 'size_t'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

[PATCH] ipmi: use platform_device_add() instead of platform_device_register() to register device allocated dynamically

I got below warning when running 2.6.19-rc5-mm1 on my ia64 machine.

WARNING at lib/kobject.c:172 kobject_init()

Call Trace:
 [<a0000001000137c0>] show_stack+0x40/0xa0
                                sp=e0000002ff9f7bc0 bsp=e0000002ff9f0d10
 [<a000000100013850>] dump_stack+0x30/0x60
                                sp=e0000002ff9f7d90 bsp=e0000002ff9f0cf8
 [<a000000100407bb0>] kobject_init+0x90/0x160
                                sp=e0000002ff9f7d90 bsp=e0000002ff9f0cd0
 [<a0000001005ae080>] device_initialize+0x40/0x1c0
                                sp=e0000002ff9f7da0 bsp=e0000002ff9f0cb0
 [<a0000001005b88c0>] platform_device_register+0x20/0x60
                                sp=e0000002ff9f7dd0 bsp=e0000002ff9f0c90
 [<a000000100592560>] try_smi_init+0xbc0/0x11e0
                                sp=e0000002ff9f7dd0 bsp=e0000002ff9f0c50
 [<a000000100594900>] init_ipmi_si+0xaa0/0x12e0
                                sp=e0000002ff9f7de0 bsp=e0000002ff9f0bd8
 [<a000000100009910>] init+0x350/0x780
                                sp=e0000002ff9f7e00 bsp=e0000002ff9f0ba8
 [<a000000100011d30>] kernel_thread_helper+0x30/0x60
                                sp=e0000002ff9f7e30 bsp=e0000002ff9f0b80
 [<a0000001000090c0>] start_kernel_thread+0x20/0x40
                                sp=e0000002ff9f7e30 bsp=e0000002ff9f0b80
WARNING at lib/kobject.c:172 kobject_init()

Call Trace:
 [<a0000001000137c0>] show_stack+0x40/0xa0
                                sp=e0000002ff9f7b40 bsp=e0000002ff9f0db0
 [<a000000100013850>] dump_stack+0x30/0x60
                                sp=e0000002ff9f7d10 bsp=e0000002ff9f0d98
 [<a000000100407bb0>] kobject_init+0x90/0x160
                                sp=e0000002ff9f7d10 bsp=e0000002ff9f0d70
 [<a0000001005ae080>] device_initialize+0x40/0x1c0
                                sp=e0000002ff9f7d20 bsp=e0000002ff9f0d50
 [<a0000001005b88c0>] platform_device_register+0x20/0x60
                                sp=e0000002ff9f7d50 bsp=e0000002ff9f0d30
 [<a00000010058ac00>] ipmi_register_smi+0xcc0/0x18e0
                                sp=e0000002ff9f7d50 bsp=e0000002ff9f0c90
 [<a000000100592600>] try_smi_init+0xc60/0x11e0
                                sp=e0000002ff9f7dd0 bsp=e0000002ff9f0c50
 [<a000000100594900>] init_ipmi_si+0xaa0/0x12e0
                                sp=e0000002ff9f7de0 bsp=e0000002ff9f0bd8
 [<a000000100009910>] init+0x350/0x780
                                sp=e0000002ff9f7e00 bsp=e0000002ff9f0ba8
 [<a000000100011d30>] kernel_thread_helper+0x30/0x60
                                sp=e0000002ff9f7e30 bsp=e0000002ff9f0b80
 [<a0000001000090c0>] start_kernel_thread+0x20/0x40
                                sp=e0000002ff9f7e30 bsp=e0000002ff9f0b80

The root cause is the device struct is initialized twice.

If the device is allocated dynamically by platform_device_alloc,
platform_device_alloc will initialize struct device, then,
platform_device_add should be used to register the device.

The difference between platform_device_register and platform_device_add is
platform_device_register will initiate the device while platform_device_add
won't.
Signed-off-by: NZhang Yanmin <yanmin.zhang@intel.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

port is dereferenced even if it is NULL.  Dereference it _after_ the
check if (!port)...  Thanks Eric <ef87@yahoo.com> for reporting this.

This fixes

	http://bugzilla.kernel.org/show_bug.cgi?id=7527Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix improper use of "&&" when "&" was intended.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix MSPEC driver to build for non SN2 enabled configs as the driver should
work in cached and uncached modes (no fetchop) on these systems.  In
addition make MSPEC select IA64_UNCACHED_ALLOCATOR, which is required for
it and move it to arch/ia64/Kconfig to avoid warnings on non ia64
architectures running allmodconfig.  Once the Kconfig code is fixed, we can
move it back.
Signed-off-by: NJes Sorensen <jes@sgi.com>
Cc: Fernando Luis Vzquez Cao <fernando@oss.ntt.co.jp>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Acked-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some more errors from the IPMI send message command are retryable, but are not
being retried by the IPMI code.  Make sure they get retried.
Signed-off-by: NCorey Minyard <minyard@acm.org>
Cc: Frederic Lelievre <Frederic.Lelievre@ca.kontron.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A wrong function was being used to free a list; this fixes the problem.
Otherwise, an oops at unload time was possible.  But not likely, since you
can't have any users when you unload the modules and it is very hard to get
messages into this queue without users.
Signed-off-by: NCorey Minyard <minyard@acm.org>
Cc: Patrick Schoeller <Patrick.Schoeller@hp.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Taken from http://bugzilla.kernel.org/show_bug.cgi?id=7439

It looks like device registration in drivers/char/ipmi/ipmi_si_intf.c was
cleaned up and a small error was made when setting the class_mask.  The fix
is simple as the correct mask value is defined in the code but is not used.
Acked-by: NCorey Minyard <minyard@acm.org>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If no devices found or invalid parameter is specified,
scl200wdt_pnp_driver is left unregistered.
It breaks global list of pnp drivers.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

ioremap must be balanced by an iounmap and failing to do so can result
in a memory leak.

Tested (compilation only) to make sure the files are compiling without
any warning/error due to new changes
Signed-off-by: NAmol Lad <amol@verismonetworks.com>
Signed-off-by: NDave Airlie <airlied@linux.ie>

- callers of drm_sysfs_create() and drm_sysfs_device_add() looked for
  errors using IS_ERR(), but the functions themselves only ever returned
  NULL on error.  Fixed.

- unwind from, and propagate sysfs errors
Signed-off-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDave Airlie <airlied@linux.ie>

The other failure returns in this function are negative, so make
this one do the same.
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NDave Airlie <airlied@linux.ie>

fd.o bug 1746
Signed-off-by: NDave Airlie <airlied@linux.ie>

fd.o bug 8662
Signed-off-by: NDave Airlie <airlied@linux.ie>

only allow specific type-3 packets to pass the verifier instead of all for r100/r200 as others might be unsafe (r300 already does this), and add checking for these we need but aren't safe. Check the RADEON_CP_INDX_BUFFER packet on both r200 and r300 as it isn't safe neither.
Signed-off-by: NDave Airlie <airlied@linux.ie>

Commits 881a8c12 and
efe1ec27 corrects pci device matching in
only one way; it no longer oopses/crashes, despite hotplug is not solved
in these changes.

Whenever pci_find_device -> pci_get_device change is performed, also
pci_dev_get and pci_dev_put should be in most cases called to properly
handle hotplug.  This patch does exactly this thing -- increase refcount
to let kernel know, that we are using this piece of HW just now.

It affects moxa and rio char drivers.

Cc: <R.E.Wolff@BitWizard.nl>
Acked-by: NAmit Gud <gud@eth.net>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

These returns should be negative, like the others in this function.
Signed-off-by: NDave Jones <davej@redhat.com>
Acked-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Also fixes comment for nowayout module param.
Signed-off-by: NBen Collins <bcollins@ubuntu.com>

Make epca fail on initialization failure instead of panic.

Cc: "Digi International, Inc" <Eng.Linux@digi.com>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Acked-by: NAlan Cox <alan@redhat.com>
Acked-by: NScott Kilau <scottk@digi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Correct the following bugs introduced by commit
67cc0161:

- remove one remaining and now incorrect baud_table[] usage
- "baud +=" is no longer correct

The former bug was spotted by the Coverity checker.

Rolf Eike Beer spotted a bug in the initial version of my patch.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove reference to PAGE_SIZE that causes errors if PAGE_SIZE != 4096
Signed-off-by: NPaul Fulghum <paulkf@microgate.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The telecom clock driver for MPBL0010 ATCA SBC depends on X86
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Acked-by: NMark Gross <mark.gross@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Found by an analysis tool and reported to the list. Fix is simple enough
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In contrast to most if not all PC BIOSes, OpenFirmware (OF) on PowerMacs with
UniNorth bridges does not allow changing the aperture size. The size set up by
OF is usually 16 MB, which is too low for graphics intensive environments.
Hence, add a module parameter that allows changing the aperture size at driver
initialization time. When the parameter is not specified, the default is 32 MB.
Signed-off-by: NMichel Dänzer <michel@tungstengraphics.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NDave Jones <davej@redhat.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The iTCO_wdt.c driver has been tested enough. So we can
remove the experimental classification.
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

The new Atmel AT91SAM9261 and AT91SAM9260 processors use a different
internal watchdog peripheral.  This watchdog driver is therefore
AT91RM9200-specific.

This patch renames at91_wdt.c to at91rm9200_wdt.c, and changes the name
of the configuration option.
Signed-off-by: NAndrew Victor <andrew@sanpeople.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

The recent commit (99a10a60) to fix up
mmap_kmem() broke compiles because it used PFN_DOWN() without including
<linux/pfn.h>.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

vma->vm_pgoff is an pfn _offset_ relatif to the begining
of the memory start. The previous code was doing at first:

	vma->vm_pgoff << PAGE_SHIFT

which results into a wrong physical address since some
platforms have a physical mem start that can be different
from 0. After that the previous call __pa() on this
wrong physical address, however __pa() is used to convert
a _virtual_ address into a physical one.

This patch rewrites this convertion. It calculates the
pfn of PAGE_OFFSET which is the pfn of the mem start
then it adds the vma->vm_pgoff to it.

It also uses virt_to_phys() instead of __pa() since the
latter shouldn't be used by drivers.
Signed-off-by: NFranck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>