13c589d5 ("sysfs: use seq_file when reading regular files")
converted regular sysfs files to use seq_file.  The commit substituted
generic_file_llseek() with seq_lseek() for llseek implementation.

Before the change, all regular sysfs files were allowed to seek to any
position in [0, PAGE_SIZE] as the file size is always PAGE_SIZE and
generic_file_llseek() allows any seeking inside the range under file
size; however, seq_lseek()'s behavior is different.  It traverses the
output by repeatedly invoking ->show() until it reaches the target
offset or traversal indicates EOF.  As seq_files are fully dynamic and
may not end at all, it doesn't support seeking from the end
(SEEK_END).

Apparently, there are userland tools which uses SEEK_END to discover
the buffer size to use and the switch to seq_lseek() disturbs them as
SEEK_END fails with -EINVAL.

The only benefits of using seq_lseek() instead of
generic_file_llseek() are

* Early failure.  If traversing to certain file position should fail,
  seq_lseek() will report such failures on lseek(2) instead of the
  following read/write operations.

* EOF detection.  While SEEK_END is not supported, SEEK_SET/CUR +
  large offset can be used to detect eof - eof at the time of the seek
  anyway as the file size may change dynamically.

Both aren't necessary for sysfs or prospect kernfs users.  Revert to
genefic_file_llseek() and preserve the original behavior.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Link: https://lkml.kernel.org/r/20131031114358.GA5551@osirisTested-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Both POSIX.1-2008 and Linux Programmer's Manual have a dedicated return
error code for a case, when a file doesn't support mmap(), it's ENODEV.

This change replaces overloaded EINVAL with ENODEV in a situation
described above for sysfs binary files.
Signed-off-by: NVladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

3124eb16 ("sysfs: merge regular and bin file handling") folded bin
file handling into regular file handling.  Among other things, bin
file now shares the same open path including sysfs_open_dirent
association using sysfs_dirent->s_attr.open.  This is buggy because
->s_bin_attr lives in the same union and doesn't have the field.  This
bug doesn't trigger because sysfs_elem_bin_attr doesn't have an active
field at the conflicting position.  It does have a field "buffers" but
it isn't used anymore.

This patch collapses sysfs_elem_bin_attr into sysfs_elem_attr so that
the bin_attr is accessed through ->s_attr.bin_attr which lives with
->s_attr.attr in an anonymous union.  The code paths already assume
bin_attr contains attr as the first element, so this doesn't add any
more assumptions while making it explicit that the two types are
handled together.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Before patch(sysfs: prepare path write for unified regular / bin
file handling), when size of bin file is zero, writting still can
continue, but this patch changes the behaviour.

The worse thing is that firmware loader is broken by this patch,
and user space application can't write to firmware bin file any more
because both firmware loader and drivers can't know at advance how
large the firmware file is and have to set its initialized size as
zero.

This patch fixes the problem and keeps behaviour of writting to bin
as before.
Reported-by: NLothar Waßmann <LW@karo-electronics.de>
Tested-by: NLothar Waßmann <LW@karo-electronics.de>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NMing Lei <ming.lei@canonical.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

While looking at the code, I noticed that bin_attribute read() and write()
ops copy the inode size into an int for futher comparisons.

Some bin_attributes can be fairly large. For example, pci creates some for
BARs set to the BAR size and giant BARs are around the corner, so this is
going to break something somewhere eventually.

Let's use the right type.

[adjust for seqfile conversions, only needed for bin_read() - gkh]
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

375b611e ("sysfs: remove sysfs_buffer->ops") introduced
sysfs_file_ops() which determines the associated file operation of a
given sysfs_dirent.  As file ops access should be protected by an
active reference, the new function includes a lockdep assertion on the
sysfs_dirent; unfortunately, I forgot to take attr->ignore_lockdep
flag into account and the lockdep assertion trips spuriously for files
which opt out from active reference lockdep checking.

# cat /sys/devices/pci0000:00/0000:00:01.2/usb1/authorized

 ------------[ cut here ]------------
 WARNING: CPU: 1 PID: 540 at /work/os/work/fs/sysfs/file.c:79 sysfs_file_ops+0x4e/0x60()
 Modules linked in:
 CPU: 1 PID: 540 Comm: cat Not tainted 3.11.0-work+ #3
 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
  0000000000000009 ffff880016205c08 ffffffff81ca0131 0000000000000000
  ffff880016205c40 ffffffff81096d0d ffff8800166cb898 ffff8800166f6f60
  ffffffff8125a220 ffff880011ab1ec0 ffff88000aff0c78 ffff880016205c50
 Call Trace:
  [<ffffffff81ca0131>] dump_stack+0x4e/0x82
  [<ffffffff81096d0d>] warn_slowpath_common+0x7d/0xa0
  [<ffffffff81096dea>] warn_slowpath_null+0x1a/0x20
  [<ffffffff8125994e>] sysfs_file_ops+0x4e/0x60
  [<ffffffff8125a274>] sysfs_open_file+0x54/0x300
  [<ffffffff811df612>] do_dentry_open.isra.17+0x182/0x280
  [<ffffffff811df820>] finish_open+0x30/0x40
  [<ffffffff811f0623>] do_last+0x503/0xd90
  [<ffffffff811f0f6b>] path_openat+0xbb/0x6d0
  [<ffffffff811f23ba>] do_filp_open+0x3a/0x90
  [<ffffffff811e09a9>] do_sys_open+0x129/0x220
  [<ffffffff811e0abe>] SyS_open+0x1e/0x20
  [<ffffffff81caf3c2>] system_call_fastpath+0x16/0x1b
 ---[ end trace aa48096b111dafdb ]---

Rename fs/sysfs/dir.c::ignore_lockdep() to sysfs_ignore_lockdep() and
move it to fs/sysfs/sysfs.h and make sysfs_file_ops() skip lockdep
assertion if sysfs_ignore_lockdep() is true.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

With the previous changes, sysfs regular file code is ready to handle
bin files too.  This patch makes bin files share the regular file
path.

* sysfs_create/remove_bin_file() are moved to fs/sysfs/file.c.

* sysfs_init_inode() is updated to use the new sysfs_bin_operations
  instead of bin_fops for bin files.

* fs/sysfs/bin.c and the related pieces are removed.

This patch shouldn't introduce any behavior difference to bin file
accesses.

Overall, this unification reduces the amount of duplicate logic, makes
behaviors more consistent and paves the road for building simpler and
more versatile interface which will allow other subsystems to make use
of sysfs for their pseudo filesystems.

v2: Stale fs/sysfs/bin.c reference dropped from
    Documentation/DocBook/filesystems.tmpl.  Reported by kbuild test
    robot.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Kay Sievers <kay@vrfy.org>
Cc: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

sysfs bin file handling will be merged into the regular file support.
This patch prepares the open path.

This patch updates sysfs_open_file() such that it can handle both
regular and bin files.

This is a preparation and the new bin file path isn't used yet.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

sysfs bin file handling will be merged into the regular file support.
This patch copies mmap support from bin so that fs/sysfs/file.c can
handle mmapping bin files.

The code is copied mostly verbatim with the following updates.

* ->mmapped and ->vm_ops are added to sysfs_open_file and bin_buffer
  references are replaced with sysfs_open_file ones.

* Symbols are prefixed with sysfs_.

* sysfs_unmap_bin_file() grabs sysfs_open_dirent and traverses
  ->files.  Invocation of this function is added to
  sysfs_addrm_finish().

* sysfs_bin_mmap() is added to sysfs_bin_operations.

This is a preparation and the new mmap path isn't used yet.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

sysfs bin file handling will be merged into the regular file support.
This patch prepares the read path.

Copy fs/sysfs/bin.c::read() to fs/sysfs/file.c and make it use
sysfs_open_file instead of bin_buffer.  The function is identical copy
except for the use of sysfs_open_file.

The new function is added to sysfs_bin_operations.  This isn't used
yet but will eventually replace fs/sysfs/bin.c.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

sysfs bin file handling will be merged into the regular file support.
This patch prepares the write path.

bin file write is almost identical to regular file write except that
the write length is capped by the inode size and @off is passed to the
write method.  This patch adds bin file handling to sysfs_write_file()
so that it can handle both regular and bin files.

A new file_operations struct sysfs_bin_operations is added, which
currently only hosts sysfs_write_file() and generic_file_llseek().
This isn't used yet but will eventually replace fs/sysfs/bin.c.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

sysfs read path implements its own buffering scheme between userland
and kernel callbacks, which essentially is a degenerate duplicate of
seq_file.  This patch replaces the custom read buffering
implementation in sysfs with seq_file.

While the amount of code reduction is small, this reduces low level
hairiness and enables future development of a new versatile API based
on seq_file so that sysfs features can be shared with other
subsystems.

As write path was already converted to not use sysfs_open_file->page,
this patch makes ->page and ->count unused and removes them.

Userland behavior remains the same except for some extreme corner
cases - e.g. sysfs will now regenerate the content each time a file is
read after a non-contiguous seek whereas the original code would keep
using the same content.  While this is a userland visible behavior
change, it is extremely unlikely to be noticeable and brings sysfs
behavior closer to that of procfs.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

There isn't much to be gained by keeping around kernel buffer while a
file is open especially as the read path planned to be converted to
use seq_file and won't use the buffer.  This patch makes
sysfs_write_file() use per-write transient buffer instead of
sysfs_open_file->page.

This simplifies the write path, enables removing sysfs_open_file->page
once read path is updated and will help merging bin file write path
which already requires the use of a transient buffer due to a locking
order issue.

As the function comments of flush_write_buffer() and
sysfs_write_buffer() are being updated anyway, reformat them so that
they're more conventional.

v2: Use min_t() instead of min() in sysfs_write_file() to avoid build
    warning on arm.  Reported by build test robot.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

sysfs will be converted to use seq_file for read path, which will make
it difficult to pass around multiple pointers directly.  This patch
adds sysfs_open_file->sd and ->file so that we can reach all the
necessary data structures from sysfs_open_file.

flush_write_buffer() is updated to drop @dentry which was used to
discover the sysfs_dirent as it's now available through
sysfs_open_file->sd.

This patch doesn't cause any behavior difference.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

sysfs read path will be converted to use seq_file which will handle
buffering making sysfs_buffer a misnomer.  Rename sysfs_buffer to
sysfs_open_file, and sysfs_open_dirent->buffers to ->files.

This path is pure rename.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a separate mutex to protect sysfs_open_dirent->buffers list.  This
will allow performing sleepable operations while traversing
sysfs_buffers, which will be renamed to sysfs_open_file.

Note that currently sysfs_open_dirent->buffers list isn't being used
for anything and this patch doesn't make any functional difference.
It will be used to merge regular and bin file supports.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently, sysfs_ops is fetched during sysfs_open_file() and cached in
sysfs_buffer->ops to be used while the file is open.  This patch
removes the caching and makes each operation directly fetch sysfs_ops.

This patch doesn't introduce any behavior difference and is to prepare
for merging regular and bin file supports.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

->needs_read_fill is used to implement the following behaviors.

1. Ensure buffer filling on the first read.
2. Force buffer filling after a write.
3. Force buffer filling after a successful poll.

However, #2 and #3 don't really work as sysfs doesn't reset file
position.  While the read buffer would be refilled, the next read
would continue from the position after the last read or write,
requiring an explicit seek to the start for it to be useful, which
makes ->needs_read_fill superflous as read buffer is always refilled
if f_pos == 0.

Update sysfs_read_file() to test buffer->page for #1 instead and
remove ->needs_read_fill.  While this changes behavior in extreme
corner cases - e.g. re-reading a sysfs file after seeking to non-zero
position after a write or poll, it's highly unlikely to lead to actual
breakage.  This change is to prepare for using seq_file in the read
path.

While at it, reformat a comment in fill_write_buffer().
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

sysfs_addrm_start/finish() enclose sysfs_dirent additions and
deletions and sysfs_addrm_cxt is used to record information necessary
to finish the operations.  Currently, sysfs_addrm_start() takes
@parent_sd, records it in sysfs_addrm_cxt, and assumes that all
operations in the block are performed under that @parent_sd.

This assumption has been fine until now but we want to make some
operations behave recursively and, while having @parent_sd recorded in
sysfs_addrm_cxt doesn't necessarily prevents that, it becomes
confusing.

This patch removes sysfs_addrm_cxt->parent_sd and makes
sysfs_add_one() take an explicit @parent_sd parameter.  Note that
sysfs_remove_one() doesn't need the extra argument as its parent is
always known from the target @sd.

While at it, add __acquires/releases() notations to
sysfs_addrm_start/finish() respectively.

This patch doesn't make any functional difference.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Some internal sysfs functions which take explicit namespace argument
are weird in that they place the optional @ns in front of @name which
is contrary to the established convention.  This is confusing and
error-prone especially as @ns and @name may be interchanged without
causing compilation warning.

Swap the positions of @name and @ns in the following internal
functions.

 sysfs_find_dirent()
 sysfs_rename()
 sysfs_hash_and_remove()
 sysfs_name_hash()
 sysfs_name_compare()
 create_dir()

This patch doesn't introduce any functional changes.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The pre-existing sysfs interfaces which take explicit namespace
argument are weird in that they place the optional @ns in front of
@name which is contrary to the established convention.  For example,
we end up forcing vast majority of sysfs_get_dirent() users to do
sysfs_get_dirent(parent, NULL, name), which is silly and error-prone
especially as @ns and @name may be interchanged without causing
compilation warning.

This renames sysfs_get_dirent() to sysfs_get_dirent_ns() and swap the
positions of @name and @ns, and sysfs_get_dirent() is now a wrapper
around sysfs_get_dirent_ns().  This makes confusions a lot less
likely.

There are other interfaces which take @ns before @name.  They'll be
updated by following patches.

This patch doesn't introduce any functional changes.

v2: EXPORT_SYMBOL_GPL() wasn't updated leading to undefined symbol
    error on module builds.  Reported by build test robot.  Fixed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

sysfs ns (namespace) implementation became more convoluted than
necessary while trying to hide ns information from visible interface.
The relatively recent attr ns support is a good example.

* attr ns tag is determined by sysfs_ops->namespace() callback while
  dir tag is determined by kobj_type->namespace().  The placement is
  arbitrary.

* Instead of performing operations with explicit ns tag, the namespace
  callback is routed through sysfs_attr_ns(), sysfs_ops->namespace(),
  class_attr_namespace(), class_attr->namespace().  It's not simpler
  in any sense.  The only thing this convolution does is traversing
  the whole stack backwards.

The namespace callbacks are unncessary because the operations involved
are inherently synchronous.  The information can be provided in in
straight-forward top-down direction and reversing that direction is
unnecessary and against basic design principles.

This backward interface is unnecessarily convoluted and hinders
properly separating out sysfs from driver model / kobject for proper
layering.  This patch updates attr ns support such that

* sysfs_ops->namespace() and class_attr->namespace() are dropped.

* sysfs_{create|remove}_file_ns(), which take explicit @ns param, are
  added and sysfs_{create|remove}_file() are now simple wrappers
  around the ns aware functions.

* ns handling is dropped from sysfs_chmod_file().  Nobody uses it at
  this point.  sysfs_chmod_file_ns() can be added later if necessary.

* Explicit @ns is propagated through class_{create|remove}_file_ns()
  and netdev_class_{create|remove}_file_ns().

* driver/net/bonding which is currently the only user of attr
  namespace is updated to use netdev_class_{create|remove}_file_ns()
  with @bh->net as the ns tag instead of using the namespace callback.

This patch should be an equivalent conversion without any functional
difference.  It makes the code easier to follow, reduces lines of code
a bit and helps proper separation and layering.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kay Sievers <kay@vrfy.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes the coding style warnings in fs/sysfs/file.c for broken
strings across lines.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes the uaccess.h warnings in the sysfs.c files.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes up the 80 column coding style issues in the sysfs .c files.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes up all of the space-related coding style issues for the sysfs
code.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This removes all trailing whitespace errors in the sysfs code.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The export should happen after the function, not at the bottom of the
file, so fix that up.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If sysfs_notify is called on a binary attribute, bad things can
happen, so prevent it.

Note, no in-kernel usage of this is currently present, but in the
future, it's good to be safe.

Changes in V2:
- Also ignore sysfs_notify on dirs, links
- Use WARN_ON rather than silently failing
- Compiled and tested (huge apologies about first submission)
Signed-off-by: NNick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 6ad58fa8 as %pSR
isn't in the tree yet.

Cc: Joe Perches <joe@perches.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new vsprintf extension to avoid any possible
message interleaving.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Nothing outside of fs/sysfs/file.c references this function, so mark it static.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Recently an OOPS was observed from the usb serial io_ti driver when it tried to remove
sysfs directories.  Upon investigation it turns out this driver was always buggy
and that a recent sysfs change had stopped guarding itself against removing attributes
from sysfs directories that had already been removed. :(

Historically we have been silent about attempting to files from nonexistent sysfs
directories and have politely returned error codes.  That has resulted in people writing
broken code that ignores the error codes.

Issue a kernel WARNING and a stack backtrace to make it clear in no uncertain
terms that abusing sysfs is not ok, and the callers need to fix their code.

This change transforms the io_ti OOPS into a more comprehensible error message
and stack backtrace.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Reported-by: NWolfgang Frisch <wfpub@roembden.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

sysfs is a core piece of ifrastructure that many people use and
few people have all of the rules in their head on how to use
it correctly.  Add warnings for people using tagged directories
improperly to that any misuses can be caught and diagnosed quickly.

A single inexpensive test in sysfs_find_dirent is almost sufficient
to catch all possible misuses.  An additional warning is needed
in sysfs_add_dirent so that we actually fail when attempting to
add an untagged dirent in a tagged directory.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Looking up files in sysfs is hard to understand and analyize because we
currently allow placing untagged files in tagged directories.  In the
implementation of that we have two subtly different meanings of NULL.
NULL meaning there is no tag on a directory entry and NULL meaning
we don't care which namespace the lookup is performed for.  This
multiple uses of NULL have resulted in subtle bugs (since fixed)
in the code.

Currently it is only the bonding driver that needs to have an untagged
file in a tagged directory.

To untagle this mess I am adding support for tagged files to sysfs.
Modifying the bonding driver to implement bonding_masters as a tagged
file.  Registering bonding_masters once for each network namespace.
Then I am removing support for untagged entries in tagged sysfs
directories.

Resulting in code that is much easier to reason about.
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On some arches (x86, sh, arm, unicore, powerpc) the oops message would
print out the last sysfs file accessed.

This was very useful in finding a number of sysfs and driver core bugs
in the 2.5 and early 2.6 development days, but it has been a number of
years since this file has actually helped in debugging anything that
couldn't also be trivially determined from the stack traceback.

So it's time to delete the line.  This is good as we need all the space
we can get for oops messages at times on consoles.
Acked-by: NPhil Carmody <ext-phil.2.carmody@nokia.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

d_path() returns an ERR_PTR and it doesn't return NULL.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Cc: stable <stable@kernel.org>
Reviewed-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>