- 08 4月, 2014 2 次提交
-
-
由 Kailang Yang 提交于
Add eapd shutup function to alc283_shutup. It could avoid pop noise from speaker. Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kailang Yang 提交于
Chrome OS was use model name of alc283-dac-wcaps for loading model as default. Change the model name to same as model name of Chrome OS for future support. Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 07 4月, 2014 1 次提交
-
-
由 Kailang Yang 提交于
It is better to change Mic2-Vref to manual mode. Manual control Mic2-Vref will solve pop noise issue. It will improve pop noise for power on, power off, S3 and resume. Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 05 4月, 2014 1 次提交
-
-
由 Joe Perches 提交于
Most of it duplicates function tracing and one of them has an uncompilable printf %P use. Others have format/argument mismatches. Remove unused DBG1 macro definition Neaten uart401.c use of ok test around this DBG macro removal. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 4月, 2014 2 次提交
-
-
由 Ondrej Zary 提交于
Save/restore routing and rate registers during suspend/resume. This fixes S/PDIF input being disabled after resume. Tested with Audiophile 24/96. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Ondrej Zary 提交于
Also restore AK4xxx mixer volumes on resume for M-Audio ICE1712-based cards. This fixes incorrect (sound working) zero mixer volumes after resume. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 03 4月, 2014 4 次提交
-
-
由 Ondrej Zary 提交于
Add S/PDIF suspend support for M-Audio cards based on ICE1712 chip. Tested (playback only) on Audiophile 24/96. Capture will probably not work. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Ondrej Zary 提交于
Separate HW initialization from device creation. This is needed for suspend/resume support. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The recent fixups for HP laptops to support the mute LED made the speaker output silent on some machines. It turned out that they use the NID 0x18 for the speaker while it's also used for controlling the LED via VREF bits although the current driver code blindly assumes that such a node is a mic pin (where 0x18 is usually so). This patch fixes the problem by only changing the VREF bits and keeping the other pin ctl bits. Reported-and-tested-by: NHui Wang <hui.wang@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kailang Yang 提交于
If it only has single output of HP out of machine. The driver parser will copy hp_pins to line_out_pins. hp_pins will empty for alc283_init and alc283_shutup functions. This will cause not have value for hp_pin_sense. Add check line_out_type code will solve it . Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 31 3月, 2014 4 次提交
-
-
由 Ondrej Zary 提交于
Add suspend support for M-Audio cards based on ICE1712 chip. Tested with M-Audio Audiophile 24/96. S/PDIF will probably not work. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Ondrej Zary 提交于
Add suspend/resume support for ICE1712 chip. Card-specific subdrivers need to enable it and provide callbacks that suspend/resume the codecs. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 W. Trevor King 提交于
The `lspci -nnvv` output contains (wrapped for line length): 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:115d] Signed-off-by: NW. Trevor King <wking@tremily.us> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Dan Carpenter 提交于
This used to be a part of a condition until f3d145aa ('ALSA: asihpi: MMAP for non-busmaster cards') but now it's not and we can remove an indent level. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 26 3月, 2014 4 次提交
-
-
由 Hui Wang 提交于
When we plug a 3-ring headset on the Dell machines (VID: 0x10ec0255, SID: 0x10280632; VID: 0x10ec0293, SID: 0x1028062c; VID: 0x10ec0293, SID: 0x1028062e), the headset mic can't be detected, after apply this patch, the headset mic can work well. BugLink: https://bugs.launchpad.net/bugs/1297581 Cc: David Henningsson <david.henningsson@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: NHui Wang <hui.wang@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lucas Stach 提交于
On Tegra the convention is to have a single machine driver that's controlling the whole audio subsystem. Move the clock handling to the machine driver, to be in line with the other Tegra drivers and give the machine driver full control over the single Tegra audio PLL. Signed-off-by: NLucas Stach <dev@lynxeye.de> Acked-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Jean-Francois Moine 提交于
Some simple audio cards may have many DAI links. This patch extends the simple-card driver for handling such cards. Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Jean-Francois Moine 提交于
The DAI link array and the properties (fmt, sysclk slots) are hard-coded for a single CPU / CODEC link. This patch dynamically allocates the DAI link array and the properties with the aim of supporting many DAI links. Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 25 3月, 2014 6 次提交
-
-
由 Xiubo Li 提交于
This patch add .xlate_tdm_slot_mask support for IMX SSI, and this will generate the TDM slot TX and RX masks. Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Xiubo Li 提交于
This patch add .xlate_tdm_slot_mask support for ESAI, and this will generate the TDM slot TX and RX masks. Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Xiubo Li 提交于
This patch add fsl_asoc_xlate_tdm_slot_mask() support for utils. For the some spcified DAI driver, this will be used to generate the TDM slot TX/RX mask. And the TX/RX mask will use a 0 bit for an active slot as default, and the default active bits are at the LSB of the masks. Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Xiubo Li 提交于
The 'of_' is not appropriate here for there hasn't any DT parsing. Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
Before we had card level support for DAPM and controls machine drivers would register their controls and DAPM elements with the CODEC. This required us to temporarily unset the name_prefix of a CODEC during the rtd init callback to avoid the machine level controls getting the CODEC's prefix. Now that all machine drivers properly register their machine level controls and DAPM elements with the card rather than with the CODEC we can drop the hack that sets the CODEC's name_prefix to NULL while calling the DAI link or AUX dev init callback. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Takashi Iwai 提交于
The auto-parser may ignore some pins that could be valid when they don't match with the assumption or if there are way too many pins assigned to the same output type. So far, such a pin has been silently ignored, but it's better to leave a message, which would help for debugging and understanding the problem. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 24 3月, 2014 1 次提交
-
-
由 Kuninori Morimoto 提交于
src might not exist. kernel will be hung-up without this patch in such case. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 23 3月, 2014 1 次提交
-
-
由 Mark Brown 提交于
The changes in "ASoC: pcm: free path list before exiting from error conditions" actually introduced both double frees (in case where the path list was allocated but empty) and frees of unallocated memory (in cases where the error being handled was -ENOMEM. Drop the commit for now. Fixes: e4ad1acc (ASoC: pcm: free path list before exiting from error conditions) Reported-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NMark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
-
- 22 3月, 2014 3 次提交
-
-
由 Lars-Peter Clausen 提交于
Fixes: 115f3f8 ("ASoC: mfld_machine: Convert to table based DAPM and control setup") Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Kuninori Morimoto 提交于
Support for loading the Renesas R-Car sound driver via DeviceTree. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
Use table based setup to register the controls and DAPM widgets and routes. This on one hand makes the code a bit cleaner and on the other hand the board level DAPM elements get registered in the card's DAPM context rather than in the CODEC's DAPM context. The mfld_machine driver is a bit special in that it directly writes to one of the CODEC registers from one of the control handlers. Previous to this patch it was able to get a pointer to the CODEC from the control, since the control was registered with the CODEC. This won't be possible anymore once the control is registered with the card. Since there are already global variables in the driver accessed in the same function the patch adds a global variable that holds a pointer to the CODEC and uses that. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 20 3月, 2014 4 次提交
-
-
由 Nicolin Chen 提交于
This patch adds support for the Cirrus Logic CS42448/CS42888 Audio CODEC that has six/four 24-bit AD and eight 24-bit DA converters. [ CS42448/CS42888 supports both I2C and SPI control ports. As initial patch, this patch only adds the support for I2C. ] Signed-off-by: NNicolin Chen <Guangyu.Chen@freescale.com> Acked-by: NBrian Austin <brian.austin@cirrus.com> Acked-by: NPaul Handrigan <Paul.Handrigan@cirrus.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Mengdong Lin 提交于
This is a temporary fix for some Intel HDMI codecs to avoid no sound output for a resuming playback after S3. After S3, the audio driver restores pin:cvt connection selections by snd_hda_codec_resume_cache(). However this can happen before the gfx side is ready and such connect selection is overlooked by HW. After gfx is ready, the pins make the default selection again. And this will cause multiple pins share a same convertor and mute control will affect each other. Thus a resumed audio playback become silent after S3. This patch verifies pin:cvt connection on preparing a stream, to assure the pin selects the right convetor and an assigned convertor is not shared by other unused pins. Apply this fix-up on Haswell, Broadwell and Valleyview (Baytrail). We need this temporary fix before a reliable software communication channel is established between audio and gfx, to sync audio/gfx operations. Signed-off-by: NMengdong Lin <mengdong.lin@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Dylan Reid 提交于
When using an rbtree cache, there can be allocations the first time a register is accessed. This can cause an attempt to schedule while atomic in the case that the regmap is using a spinlock. This could be fixed by either initializing all the registers or using a flat cache. The register maps for tegra30_ahub and tegra30_i2s are dense and don't save much from using a tree so convert them to flat. Tegra30 changes tested on Norrin, Tegra20 changes compile. Signed-off-by: NDylan Reid <dgreid@chromium.org> Tested-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Brian Austin 提交于
The shift values for the ADC,PCM, and Analog kcontrols were wrong causing wrong values for the SOC_DOUBLE_R_SX_TLV macros Fixed the TLV for aout_tlv to show -102dB correctly Fixes: 1d99f243 (ASoC: core: Rework SOC_DOUBLE_R_SX_TLV add SOC_SINGLE_SX_TLV) Reported-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: NBrian Austin <brian.austin@cirrus.com> Signed-off-by: NMark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
-
- 19 3月, 2014 6 次提交
-
-
由 Charles Keepax 提交于
The snd_compr_open function would always return 0 even if the compressed ops open function failed, obviously this is incorrect. Looks like this was introduced by a small typo in: commit a0830dbd ALSA: Add a reference counter to card instance This patch returns the value from the compressed op as it should. Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: NVinod Koul <vinod.koul@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Mark Brown 提交于
Since all regmap CODECs should be (and are) using the more advance regmap cache infrastructure remove the code which supports that and just proxy I/O straight through to regmap. Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Nicolin Chen 提交于
The current simple-card driver separates the daimft for cpu_dai and codec_dai. So we might get different values for them (0x4003 and 0x1003 for example): asoc-simple-card sound-cs42888.12: cpu : 2024000.esai / 4003 / 132000000 asoc-simple-card sound-cs42888.12: codec : cs42888 / 1003 / 24576000 asoc-simple-card sound-cs42888.12: cs42888 <-> 2024000.esai mapping ok This is not allowed at all as we need to keep the DAIFMT settings identical for both the ends of the link. Thus this patch fixes it by overwriting the cpu_dai->fmt with codec_dai->fmt since we defined the DAIFMT_MASTER basing on CODEC at the first place while the other bits are same. Signed-off-by: NNicolin Chen <Guangyu.Chen@freescale.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Brian Austin 提交于
The mask bits values were wrong for the SOC_VALUE_ENUM_SINGLE for the PCM/ADC Swap controls Reported-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NBrian Austin <brian.austin@cirrus.com> Signed-off-by: NMark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
-
由 Brian Austin 提交于
The mask bits values were wrong for the SOC_VALUE_ENUM_SINGLE for the mono mix controls. Reported-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NBrian Austin <brian.austin@cirrus.com> Signed-off-by: NMark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
-
由 Thomas Petazzoni 提交于
The Armada 370 DB board not only has analog audio input/output, but also S/PDIF input/output. This commit adds support for S/PDIF in the ASoC machine driver of the Armada 370 DB platform, and adjusts the Device Tree bindings documentation accordingly. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 18 3月, 2014 1 次提交
-
-
由 Lars-Peter Clausen 提交于
With CODEC to CODEC links rtd->codec does not necessarily point to the driver's CODEC. CODEC drivers should always use dai->codec and never even look at the PCM runtime. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: NJyri Sarha <jsarha@ti.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-