When a timeout of zero is specified, the caller is only interested in
the fence status.

In the current implementation, dma_fence_default_wait will always call
schedule_timeout() at least once for an unsignaled fence. This adds a
significant overhead to a fence status query.

Avoid this overhead by returning early if a zero timeout is specified.

v2: move early return after enable_signaling
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170426144620.3560-1-andresx7@gmail.com

We need to set vop config done after update line flag config, it's a
new requirement for chips newer than rk3368.

Since we would only use line flag irq for vact_end, let's move it to
vop_crtc_enable.
Signed-off-by: NJeffy Chen <jeffy.chen@rock-chips.com>
Acked-by: Mark Yao <mark.yao@rock-chips.com
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1493276057-4516-1-git-send-email-jeffy.chen@rock-chips.com

Adding DPCD register definitions from the DP 1.3 specification for CEC
over AUX support.

V2: Add DP_ prefix to all defines.
V3: missed prefixes from the ESI1 defines

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NClint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1492703263-11494-1-git-send-email-clinton.a.taylor@intel.com

Display stream compression is supported on DP 1.4 DP
devices. This patch adds the corersponding DPCD
register definitions for DSC.

v4:
* Add DSC Enable DPCD register def (Ander)
v3:
* Add some SHIFTS and MASKS for uniformity (Jani Nikula)
v2:
* Rebased on drm-tip
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491259870-25613-1-git-send-email-manasi.d.navare@intel.com

Currently, the audio sampler clock is enabled from dw_hdmi_setup() at
step E. and is kept enabled for later use. This clock should be enabled
and disabled along with the actual audio stream and not always on (that
is bad for PM). Furthermore, as described by the datasheet, the I2S
variant needs to gate/ungate the clock when the stream is
enabled/disabled.

This commit adds a parameter to hdmi_audio_enable_clk() that controls
when the audio sample clock must be enabled or disabled. Then, it adds
the call to this function from dw_hdmi_i2s_audio_enable() and
dw_hdmi_i2s_audio_disable().
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NRomain Perier <romain.perier@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170414083113.4255-3-romain.perier@collabora.comSigned-off-by: NArchit Taneja <architt@codeaurora.org>

Currently, CTS+N is forced to zero as a workaround of the IP block for
i.MX platforms. This is requested in the datasheet of the corresponding
IP for AHB mode only. However, we have seen that it introduces glitches
or delays when playing a sound on HDMI for I2S mode. This proves that we
cannot keep the current functions for handling audio stream as-is if
these contain workaround that are specific to a mode.

This commit introduces two callbacks, one for each variant.
dw_hdmi_setup defines the right function depending on the detected
variant. Then, the exported functions dw_hdmi_audio_enable and
dw_hdmi_audio_disable calls the corresponding callbacks
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NRomain Perier <romain.perier@collabora.com>
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170414083113.4255-2-romain.perier@collabora.com

Until now, we've had to limit Raspberry Pi to 256MB of CMA memory to
keep from triggering the hardware addressing bug between the tile
binner and the tile alloc memory (where the top 4 bits come from the
tile state data array's address).

To work around that and allow more memory to be reserved for graphics,
allocate a single BO to store tile state data arrays and tile
alloc/overflow memory while the GPU is active, and make sure that that
one BO doesn't happen to cross a 256MB boundary.  With that in place,
we can allocate textures and shaders anywhere in system memory (still
contiguous, of course).
Signed-off-by: NEric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170327231025.19391-1-eric@anholt.netReviewed-by: NBoris Brezillon <boris.brezillon@free-electrons.com>

We were returning without decrementing if the error happened, meaning
that at the next submit we wouldn't try to bring up the power domain.
Signed-off-by: NEric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170417162603.12726-1-eric@anholt.netReviewed-by: NSean Paul <seanpaul@chromium.org>

The HDMI driver is currently enabling all clocks at probe time and
keeps the power-domain connected to the HDMI encoder enabled.

Move all activation code to vc4_hdmi_encoder_enable() and make sure
the clks and power domain are released when the HDMI encoder is not used
by adding deactivation steps in vc4_hdmi_encoder_disable().

Note that the sequencing imposed by the IP requires that we move
vc4_hdmi_encoder_mode_set() code into vc4_hdmi_encoder_enable().
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: NEric Anholt <eric@anholt.net>
Reviewed-by: NEric Anholt <eric@anholt.net>

The stub get_unmapped_area() function was actually getting called, so
all of our mmap()s failed.

Cc: Yannick Fertre <yannick.fertre@st.com>
Fixes: 97bf3a9a ("drm/cma: Update DEFINE_DRM_GEM_CMA_FOPS to add get_unmapped_area")
Signed-off-by: NEric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170417233124.18420-1-eric@anholt.netReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

All the error codes we (ab)use are strictly not the right ones (since
they're all for the vfs, and the only thing we're allowed to do from
an ioctl is EINVAL). But ENOENT is the common error code for failed to
look up an object throughout drm, so let's use it in the cma helpers,
too.

Note that this does change uabi for some drivers, but that shouldn't
ba a problem:
- other drivers (e.g. i915) already return ENOENT for invalid gem bo
- userspace tends to only check for errors, not specific ones (except
  when ioctl restarting is needed)
- if the gem bo isn't there a previous step (either creating or
  importing it) failed already, this situation should always be a
  userspace bug.

Changing it does help with debugging userspace bugs though, by making
error reporting more consistent.

Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170418121120.31862-1-daniel.vetter@ffwll.ch

sync_file uses the reference count of the file, the internal
kref was never getting moved past 1.

We can reintroduce this if we decide we need it later.

[airlied: fix buildbot warnings]
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>
Acked-by: NSumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170413014144.637-2-airlied@gmail.com

Motivated by a request from Eric.

v2: Take in suggestions from Lionel

Cc: Eric Anholt <eric@anholt.net>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170412152006.12233-1-daniel.vetter@ffwll.ch

Add Philippe Cornu and myself as maintainers.
Signed-off-by: NYannick Fertre <yannick.fertre@st.com>
Signed-off-by: NEric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/1492164819-10513-6-git-send-email-yannick.fertre@st.comReviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Reviewed-by: NEric Anholt <eric@anholt.net>

This controller provides output signals to interface directly a variety
of LCD and TFT panels. These output signals are: RGB signals
(up to 24bpp), vertical & horizontal synchronisations, data enable and
the pixel clock.
Reviewed-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NYannick Fertre <yannick.fertre@st.com>
Signed-off-by: NEric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/1492164819-10513-5-git-send-email-yannick.fertre@st.comReviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Reviewed-by: NEric Anholt <eric@anholt.net>

This patch adds documentation of device tree bindings for the STM32 LTDC
(Lcd-Tft Display Controller).
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NYannick Fertre <yannick.fertre@st.com>
Signed-off-by: NEric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/1492164819-10513-4-git-send-email-yannick.fertre@st.com

Add function drm_fb_cma_get_gem_addr() which return the physical address
of framebuffer (1st pixel). This function will usually be called by plane
callback (atomic_update).
Signed-off-by: NYannick Fertre <yannick.fertre@st.com>
Signed-off-by: NEric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/1492164819-10513-3-git-send-email-yannick.fertre@st.comReviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Reviewed-by: NEric Anholt <eric@anholt.net>

Missing field get_unmapped_area which is necessary with device without MMU
Signed-off-by: NYannick Fertre <yannick.fertre@st.com>
Signed-off-by: NEric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/1492164819-10513-2-git-send-email-yannick.fertre@st.comReviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Reviewed-by: NEric Anholt <eric@anholt.net>

This is needed for proper synchronization with display on another DRM
device (pl111 or tinydrm) with buffers produced by vc4 V3D.  Fixes the
new igt vc4_dmabuf_poll testcase, and rendering of one of the glmark2
desktop tests on pl111+vc4.

This doesn't yet introduce waits on another device's fences before
vc4's rendering/display, because I don't have testcases for them.

v2: Reuse dma_fence_free(), retitle commit message to clarify that
    it's not a full dma-buf fencing implementation yet.
Signed-off-by: NEric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170412191202.22740-6-eric@anholt.netAcked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Trivial fix.
Some dev_err messages in this driver are missing \n, so add them.
Signed-off-by: NLiu Ying <gnuiyl@gmail.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491877339-19913-1-git-send-email-gnuiyl@gmail.com

Forgot to add this :(

Fixes: 19315294 ("drm: Add acquire ctx parameter to ->plane_disable")
Cc: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170413074007.7620-1-daniel.vetter@ffwll.ch

Trivial fix to spelling mistake in DRM_DEBUG_ATOMIC debug message
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170412162722.25087-1-colin.king@canonical.com

Add Laurent as a reviewer and Andrzej as a maintainer for DRM bridge chip
drivers. They actively review and contribute to bridge drivers and the
bridge API.
Acked-by: NAndrzej Hajda <a.hajda@samsung.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170410063641.17704-1-architt@codeaurora.org

This reverts

commit b8dfa821
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Fri Apr 7 12:17:12 2017 +0100
    drm: Don't allow interruptions when opening debugfs/crc

It reportedly breaks things, so let's revert now and try again later.

Fixes: b8dfa821 ("drm: Don't allow interruptions when opening debugfs/crc")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Reported-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NSean Paul <seanpaul@chromium.org>

I thought I've fixed this, but maybe not. Anyway, clearly broken, and
easy fix.

Cc: Tony Lindgren <tony@atomide.com>
Reported-by: NTony Lindgren <tony@atomide.com>
Fixes: b95ff031 ("drm: Remove drm_modeset_(un)lock_crtc")
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Tested-by: NTony Lindgren <tony@atomide.com>
Reviewed-by: NDaniel Stone <daniels@collabora.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170407164817.28272-1-daniel.vetter@ffwll.ch

I've broken this by removing the backoff handling from the
set_config2atomic helper in

commit 38b6441e
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Mar 22 22:50:58 2017 +0100

    drm/atomic-helper: Remove the backoff hack from set_config

Fixing this properly would mean we get to wire the acquire_ctx all the
way through vmwgfx fbdev code, and doing the same was tricky for the
shared fbdev layer. Probably much better to look into refactoring the
entire code to use the helpers, but since that's not a viable
long-term solution fix the issue by open-coding a vmwgfx version of
set_config, that does the legacy backoff dance internally.

Note: Just compile-tested. The idea is to take
drm_mode_set_config_internal(), remove the "is this a legacy driver"
check, and whack the drm_atomic_legacy_backoff trickery at the end.
Since drm_atomic_legacy_backoff is for atomic commits only we need to
open-code it.

Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170406200256.26040-1-daniel.vetter@ffwll.ch

Signed-off-by: NJeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491481885-13775-12-git-send-email-jeffy.chen@rock-chips.com

Current drm bind/unbind sequence would cause some memory issues.
For example we should not cleanup iommu before cleanup mode config.

Reorder bind/unbind sequence, follow exynos drm.
Signed-off-by: NJeffy Chen <jeffy.chen@rock-chips.com>
[seanpaul fixed spelling typo in commit subject]
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491481885-13775-11-git-send-email-jeffy.chen@rock-chips.com

The clock is enabled when binding cdn dp.
Signed-off-by: NJeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491481885-13775-10-git-send-email-jeffy.chen@rock-chips.com

The clocks are prepared when binding vop.
Signed-off-by: NJeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491481885-13775-9-git-send-email-jeffy.chen@rock-chips.com

We're trying to access vop registers here, so need to make sure
the pm domain is on.

Normally it should be enabled by the bootloader, but there's no
guarantee of it. And if we wanna do unbind/bind, it would also
cause the device to hang.

And this patch also does these:
1/ move vop_initial to the end of vop_bind for eaiser error handling.
2/ correct the err_put_pm_runtime of vop_enable.
Signed-off-by: NJeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491481885-13775-8-git-send-email-jeffy.chen@rock-chips.com

After snd_soc_unregister_codec, the dai link would remain bound to
the invalid codec. That would cause crashes after unbind dp driver.

Let's unregister audio codec when removing dp driver to prevent that.
Signed-off-by: NJeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491481885-13775-7-git-send-email-jeffy.chen@rock-chips.com

Signed-off-by: NJeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491481885-13775-6-git-send-email-jeffy.chen@rock-chips.com

Normally we do this in drm_mode_config_cleanup. But:
1/ analogix dp's connector is allocated in bind, and freed after unbind.
So we need to destroy it in unbind to avoid further access.
2/ the drm bridge is attached in bind, and detached in encoder cleanup.
So we need to destroy encoder in unbind.
Signed-off-by: NJeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491481885-13775-5-git-send-email-jeffy.chen@rock-chips.com

The clock is enabled when binding analogix dp.
Signed-off-by: NJeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491481885-13775-4-git-send-email-jeffy.chen@rock-chips.com

The dp aux is registered when binding analogix dp.
Signed-off-by: NJeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491481885-13775-3-git-send-email-jeffy.chen@rock-chips.com

The panel is attached when binding analogix dp.
Signed-off-by: NJeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491481885-13775-2-git-send-email-jeffy.chen@rock-chips.com

The code does not like to be interrupted when waiting for the first
vblank after opening a debugfs/crc channel, so don't.

[66285.716870] WARNING: CPU: 1 PID: 16615 at drivers/gpu/drm/drm_debugfs_crc.c:185 crtc_crc_open+0x1d0/0x1f0 [drm]
[66285.716877] Modules linked in: i915 intel_powerclamp crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel cryptd intel_gtt i2c_algo_bit lpc_ich mfd_core drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops prime_numbers drm video button autofs4 sd_mod ahci libahci libata i2c_i801 scsi_mod i2c_designware_platform i2c_designware_core i2c_core
[66285.716929] CPU: 1 PID: 16615 Comm: kms_frontbuffer Not tainted 4.11.0-rc5+ #7
[66285.716935] Hardware name: GIGABYTE GB-BXBT-1900/MZBAYAB-00, BIOS F8 03/02/2016
[66285.716941] Call Trace:
[66285.716955]  dump_stack+0x4d/0x6f
[66285.716966]  __warn+0xc1/0xe0
[66285.716975]  warn_slowpath_null+0x18/0x20
[66285.717004]  crtc_crc_open+0x1d0/0x1f0 [drm]
[66285.717014]  ? wake_atomic_t_function+0x50/0x50
[66285.717024]  full_proxy_open+0xf0/0x1b0
[66285.717032]  ? full_proxy_release+0x80/0x80
[66285.717042]  do_dentry_open.isra.17+0x14b/0x2d0
[66285.717051]  vfs_open+0x42/0x60
[66285.717064]  path_openat+0x5e7/0x13d0
[66285.717074]  ? refcount_dec_and_test+0x11/0x20
[66285.717081]  ? down_read+0xd/0x30
[66285.717087]  do_filp_open+0x85/0xf0
[66285.717093]  ? __vfs_write+0x23/0x120
[66285.717100]  ? __alloc_fd+0x3a/0x170
[66285.717107]  do_sys_open+0x11e/0x1f0
[66285.717113]  ? do_sys_open+0x11e/0x1f0
[66285.717119]  SyS_openat+0xf/0x20
[66285.717125]  entry_SYSCALL_64_fastpath+0x17/0x98
[66285.717131] RIP: 0033:0x7f5f2235146a
[66285.717135] RSP: 002b:00007ffd892e6bc0 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
[66285.717142] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5f2235146a
[66285.717147] RDX: 0000000000000000 RSI: 00007ffd892e6c40 RDI: 0000000000000006
[66285.717151] RBP: 00007ffd892e6b20 R08: 0000000000000000 R09: 000000000000000f
[66285.717156] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
[66285.717161] R13: 00007ffd892e6b10 R14: 0000000000000004 R15: 00000000007e61f4

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100610
Fixes: e8fa5671 ("drm: crc: Wait for a frame before returning from open()")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NTomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170407111712.13962-1-chris@chris-wilson.co.uk

Reported-by: N李强 <liqiang6-s@360.cn>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170406155941.458-1-kraxel@redhat.com

The plat_data->input_bus_format and plat_data->input_bus_encoding
are unsigned long and are always >=0, but the value 0 was still
considered as RGB888 for input_bus_format and default color space
for input_bus_encoding in the reworked code.

This patch changes the if statement check for a non-zero value to
either use the default input bus_format and/or bus_encoding for a zero
value and the provided bus_format and/or bus_encoding for a
non zero value.

Thanks to Dan Carpenter for his bug report at [1].

Tested on Amlogic P230 (with CSC enabled for YUV444 to RGB) and Rockchip
RK3288 ACT8846 EVB Board (no CSC involved, direct RGB passthrough).

[1] http://lkml.kernel.org/r/20170406052120.GA26578@mwanda

Cc: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: def23aa7 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings")
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Reviewed-by: NArchit Taneja <architt@codeaurora.org>
[narmstrong@baylibre.com: reworded commit message and added Fixes tag]
Link: http://patchwork.freedesktop.org/patch/msgid/1491471244-24989-1-git-send-email-narmstrong@baylibre.com