Kernel-space call-chains were trimmed at the first entry because
we never processed anything beyond the first stack context.

Allow the backtrace to jump from NMI to IRQ stack then to task stack
and finally user-space stack.

Also calculate the stack and bp variables correctly so that the
stack walker does not exit early.

We can get deep traces as a result, visible in perf report -D output:

0x32af0 [0xe0]: PERF_EVENT (IP, 5): 15134: 0xffffffff815225fd period: 1
... chain: u:2, k:22, nr:24
.....  0: 0xffffffff815225fd
.....  1: 0xffffffff810ac51c
.....  2: 0xffffffff81018e29
.....  3: 0xffffffff81523939
.....  4: 0xffffffff81524b8f
.....  5: 0xffffffff81524bd9
.....  6: 0xffffffff8105e498
.....  7: 0xffffffff8152315a
.....  8: 0xffffffff81522c3a
.....  9: 0xffffffff810d9b74
..... 10: 0xffffffff810dbeec
..... 11: 0xffffffff810dc3fb

This is a 22-entries kernel-space chain.

(We still only record reliable stack entries.)

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Fix the ptregs variant when we hit user-mode tasks.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add the first steps of call-graph profiling:

 - add the -c (--call-graph) option to perf record
 - parse the call-graph record and printout out under -D (--dump-trace)

The call-graph data is not put into the histogram yet, but it
can be seen that it's being processed correctly:

0x3ce0 [0x38]: event: 35
.
. ... raw event: size 56 bytes
.  0000:  23 00 00 00 05 00 38 00 d4 df 0e 81 ff ff ff ff  #.....8........
.  0010:  60 0b 00 00 60 0b 00 00 03 00 00 00 01 00 02 00  `...`..........
.  0020:  d4 df 0e 81 ff ff ff ff a0 61 ed 41 36 00 00 00  .........a.A6..
.  0030:  04 92 e6 41 36 00 00 00                          .a.A6..
.
0x3ce0 [0x38]: PERF_EVENT (IP, 5): 2912: 0xffffffff810edfd4 period: 1
... chain: u:2, k:1, nr:3
.....  0: 0xffffffff810edfd4
.....  1: 0x3641ed61a0
.....  2: 0x3641e69204
 ... thread: perf:2912
 ...... dso: [kernel]

This shows a 3-entry call-graph: with 1 kernel-space and two user-space
entries

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Print out events in hexa dump format, when -D is specified:

0x4868 [0x48]: event: 1
.
. ... raw event: size 72 bytes
.  0000:  01 00 00 00 00 00 48 00 d4 72 00 00 d4 72 00 00  ......H..r...r.
.  0010:  00 00 40 f2 3e 00 00 00 00 30 01 00 00 00 00 00  ..@.>....0.....
.  0020:  00 00 00 00 00 00 00 00 2f 75 73 72 2f 6c 69 62  ......../usr/li
.  0030:  36 34 2f 6c 69 62 65 6c 66 2d 30 2e 31 34 31 2e  64/libelf-0.141
.  0040:  73 6f 00 00 00 00 00 00                          f-0.141
.
0x4868 [0x48]: PERF_EVENT_MMAP 29396: [0x3ef2400000(0x13000) @ (nil)]: /usr/lib64/libelf-0.141.so

This helps the debugging of mis-parsing of data files, and helps
the addition of new sample/trace formats.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- fix addr2line on userspace binary: don't only check kernel image.
- fix string allocation size for path: missing ending null char room
- fix overflow in symbol extra info
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1244907563-7820-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

If -vv (very verbose) is specified, print out raw data
in the following format:

$ perf stat -vv -r 3 ./loop_1b_instructions

[ perf stat: executing run #1 ... ]
[ perf stat: executing run #2 ... ]
[ perf stat: executing run #3 ... ]

debug:              runtime[0]: 235871872
debug:             walltime[0]: 236646752
debug:       runtime_cycles[0]: 755150182
debug:            counter/0[0]: 235871872
debug:            counter/1[0]: 235871872
debug:            counter/2[0]: 235871872
debug:               scaled[0]: 0
debug:            counter/0[1]: 2
debug:            counter/1[1]: 235870662
debug:            counter/2[1]: 235870662
debug:               scaled[1]: 0
debug:            counter/0[2]: 1
debug:            counter/1[2]: 235870437
debug:            counter/2[2]: 235870437
debug:               scaled[2]: 0
debug:            counter/0[3]: 140
debug:            counter/1[3]: 235870298
debug:            counter/2[3]: 235870298
debug:               scaled[3]: 0
debug:            counter/0[4]: 755150182
debug:            counter/1[4]: 235870145
debug:            counter/2[4]: 235870145
debug:               scaled[4]: 0
debug:            counter/0[5]: 1001411258
debug:            counter/1[5]: 235868838
debug:            counter/2[5]: 235868838
debug:               scaled[5]: 0
debug:            counter/0[6]: 27897
debug:            counter/1[6]: 235868560
debug:            counter/2[6]: 235868560
debug:               scaled[6]: 0
debug:            counter/0[7]: 2910
debug:            counter/1[7]: 235868151
debug:            counter/2[7]: 235868151
debug:               scaled[7]: 0
debug:              runtime[0]: 235980257
debug:             walltime[0]: 236770942
debug:       runtime_cycles[0]: 755114546
debug:            counter/0[0]: 235980257
debug:            counter/1[0]: 235980257
debug:            counter/2[0]: 235980257
debug:               scaled[0]: 0
debug:            counter/0[1]: 3
debug:            counter/1[1]: 235980049
debug:            counter/2[1]: 235980049
debug:               scaled[1]: 0
debug:            counter/0[2]: 1
debug:            counter/1[2]: 235979907
debug:            counter/2[2]: 235979907
debug:               scaled[2]: 0
debug:            counter/0[3]: 135
debug:            counter/1[3]: 235979780
debug:            counter/2[3]: 235979780
debug:               scaled[3]: 0
debug:            counter/0[4]: 755114546
debug:            counter/1[4]: 235979652
debug:            counter/2[4]: 235979652
debug:               scaled[4]: 0
debug:            counter/0[5]: 1001439771
debug:            counter/1[5]: 235979304
debug:            counter/2[5]: 235979304
debug:               scaled[5]: 0
debug:            counter/0[6]: 23723
debug:            counter/1[6]: 235979050
debug:            counter/2[6]: 235979050
debug:               scaled[6]: 0
debug:            counter/0[7]: 2213
debug:            counter/1[7]: 235978820
debug:            counter/2[7]: 235978820
debug:               scaled[7]: 0
debug:              runtime[0]: 235888002
debug:             walltime[0]: 236700533
debug:       runtime_cycles[0]: 754881504
debug:            counter/0[0]: 235888002
debug:            counter/1[0]: 235888002
debug:            counter/2[0]: 235888002
debug:               scaled[0]: 0
debug:            counter/0[1]: 2
debug:            counter/1[1]: 235887793
debug:            counter/2[1]: 235887793
debug:               scaled[1]: 0
debug:            counter/0[2]: 1
debug:            counter/1[2]: 235887645
debug:            counter/2[2]: 235887645
debug:               scaled[2]: 0
debug:            counter/0[3]: 135
debug:            counter/1[3]: 235887499
debug:            counter/2[3]: 235887499
debug:               scaled[3]: 0
debug:            counter/0[4]: 754881504
debug:            counter/1[4]: 235887368
debug:            counter/2[4]: 235887368
debug:               scaled[4]: 0
debug:            counter/0[5]: 1001401731
debug:            counter/1[5]: 235887024
debug:            counter/2[5]: 235887024
debug:               scaled[5]: 0
debug:            counter/0[6]: 24212
debug:            counter/1[6]: 235886786
debug:            counter/2[6]: 235886786
debug:               scaled[6]: 0
debug:            counter/0[7]: 1824
debug:            counter/1[7]: 235886560
debug:            counter/2[7]: 235886560
debug:               scaled[7]: 0

 Performance counter stats for '/home/mingo/loop_1b_instructions' (3 runs):

     235.913377  task-clock-msecs     #      0.997 CPUs    ( +-   0.011% )
              2  context-switches     #      0.000 M/sec   ( +-   0.000% )
              1  CPU-migrations       #      0.000 M/sec   ( +-   0.000% )
            136  page-faults          #      0.001 M/sec   ( +-   0.730% )
      755048744  cycles               #   3200.534 M/sec   ( +-   0.009% )
     1001417586  instructions         #      1.326 IPC     ( +-   0.001% )
          25277  cache-references     #      0.107 M/sec   ( +-   3.988% )
           2315  cache-misses         #      0.010 M/sec   ( +-   9.845% )

    0.236706075  seconds time elapsed.

This allows the summary stats to be validated.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add the --repeat <n> feature to perf stat, which repeats a given
command up to a 100 times, collects the stats and calculates an
average and a stddev.

For example, the following oneliner 'perf stat' command runs hackbench
5 times and prints a tabulated result of all metrics, with averages
and noise levels (in percentage) printed:

 aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10
 Time: 0.117
 Time: 0.108
 Time: 0.089
 Time: 0.088
 Time: 0.100

 Performance counter stats for '/home/mingo/hackbench 10' (5 runs):

    1243.989586  task-clock-msecs     #     10.460 CPUs    ( +-   4.720% )
          47706  context-switches     #      0.038 M/sec   ( +-  19.706% )
            387  CPU-migrations       #      0.000 M/sec   ( +-   3.608% )
          17793  page-faults          #      0.014 M/sec   ( +-   0.354% )
     3770941606  cycles               #   3031.329 M/sec   ( +-   4.621% )
     1566372416  instructions         #      0.415 IPC     ( +-   2.703% )
       16783421  cache-references     #     13.492 M/sec   ( +-   5.202% )
        7128590  cache-misses         #      5.730 M/sec   ( +-   7.420% )

    0.118924455  seconds time elapsed.

The goal of this feature is to allow the reliance on these accurate
statistics and to know how many times a command has to be repeated
for the noise to go down to an acceptable level.

(The -v option can be used to see a line printed out as each run progresses.)

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

 - use IPC for the instruction normalization output
 - CPUs for the CPU utilization factor value.
 - print out time elapsed like the other rows
 - tidy up the task-clocks/cpu-clocks printout

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

All AMD models share the same hw caching related event table.

Also complete the table with more events.
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1244835381.2802.2.camel@ht.satnam>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

AMD supports performance monitoring start from K7 (i.e. family 6),
so disable it for earlier AMD CPUs.
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1244714289.6923.0.camel@ht.satnam>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

With PERF_FORMAT_ID, perf_read_hw now needs space for up to 4 values.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Using atomic_set on an atomic64_t variable gives a compiler
warning on powerpc, and won't give the desired result at runtime.
This fixes an instance of this error in the perf_counter code.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <18995.20490.979429.244883@cargo.ozlabs.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

It's can be very annoying to scroll down perf annotated output
until we find relevant overhead.

Using the -l option, you can now have a small summary sorted per
overhead in the beginning of the output.

Example:

./perf annotate -l -k ../../vmlinux -s __lock_acquire

Sorted summary for file ../../vmlinux
----------------------------------------------

   12.04 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:1653
    4.61 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:1740
    3.77 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:1775
    3.56 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:1653
    2.93 /home/fweisbec/linux/linux-2.6-tip/arch/x86/include/asm/irqflags.h:15
    2.83 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:2545
    2.30 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:2594
    2.20 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:2388
    2.20 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:730
    2.09 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:730
    2.09 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:138
    1.88 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:2548
    1.47 /home/fweisbec/linux/linux-2.6-tip/arch/x86/include/asm/irqflags.h:15
    1.36 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:2594
    1.36 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:730
    1.26 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:1654
    1.26 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:1653
    1.15 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:2592
    1.15 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:1740
    1.15 /home/fweisbec/linux/linux-2.6-tip/kernel/lockdep.c:1740

[...]

Only overhead over 0.5% are summarized.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1244844682-12928-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

When we have a colored line in perf annotate, ie a middle/high
overhead one, it's sometimes useful to get the matching line
and filename from the source file, especially this path prepares
to another subsequent one which will print a sorted summary of
midle/high overhead lines in the beginning of the output.

Filename:Lines have the same color than the concerned ip lines.

It can be slow because it relies on addr2line. We could also
use objdump with -l but that implies we would have to bufferize
objdump output and parse it to filter the relevant lines since
we want to print a sorted summary in the beginning.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1244844682-12928-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/configfs:
  configfs: Rework configfs_depend_item() locking and make lockdep happy
  configfs: Silence lockdep on mkdir() and rmdir()

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (30 commits)
  [S390] wire up sys_perf_counter_open
  [S390] wire up sys_rt_tgsigqueueinfo
  [S390] ftrace: add system call tracer support
  [S390] ftrace: add function graph tracer support
  [S390] ftrace: add function trace mcount test support
  [S390] ftrace: add dynamic ftrace support
  [S390] kprobes: use probe_kernel_write
  [S390] maccess: arch specific probe_kernel_write() implementation
  [S390] maccess: add weak attribute to probe_kernel_write
  [S390] profile_tick called twice
  [S390] dasd: forward internal errors to dasd_sleep_on caller
  [S390] dasd: sync after async probe
  [S390] dasd: check_characteristics cleanup
  [S390] dasd: no High Performance FICON in 31-bit mode
  [S390] dcssblk: revert devt conversion
  [S390] qdio: fix access beyond ARRAY_SIZE of irq_ptr->{in,out}put_qs
  [S390] vmalloc: add vmalloc kernel parameter support
  [S390] uaccess: use might_fault() instead of might_sleep()
  [S390] 3270: lock dependency fixes
  [S390] 3270: do not register with tty_register_device
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  add generic lib/checksum.c
  asm-generic: add a generic uaccess.h
  asm-generic: add generic NOMMU versions of some headers
  asm-generic: add generic atomic.h and io.h
  asm-generic: add legacy I/O header files
  asm-generic: add generic versions of common headers
  asm-generic: make bitops.h usable
  asm-generic: make pci.h usable directly
  asm-generic: make get_rtc_time overridable
  asm-generic: rename page.h and uaccess.h
  asm-generic: rename atomic.h to atomic-long.h
  asm-generic: add a generic unistd.h
  asm-generic: add generic ABI headers
  asm-generic: add generic sysv ipc headers
  asm-generic: introduce asm/bitsperlong.h
  asm-generic: rename termios.h, signal.h and mman.h

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (50 commits)
  drm: include kernel list header file in hashtab header
  drm: Export hash table functionality.
  drm: Split out the mm declarations in a separate header. Add atomic operations.
  drm/radeon: add support for RV790.
  drm/radeon: add rv740 drm support.
  drm_calloc_large: check right size, check integer overflow, use GFP_ZERO
  drm: Eliminate magic I2C frobbing when reading EDID
  drm/i915: duplicate desired mode for use by fbcon.
  drm/via: vfree() no need checking before calling it
  drm: Replace DRM_DEBUG with DRM_DEBUG_DRIVER in i915 driver
  drm: Replace DRM_DEBUG with DRM_DEBUG_MODE in drm_mode
  drm/i915: Replace DRM_DEBUG with DRM_DEBUG_KMS in intel_sdvo
  drm/i915: replace DRM_DEBUG with DRM_DEBUG_KMS in intel_lvds
  drm: add separate drm debugging levels
  radeon: remove _DRM_DRIVER from the preadded sarea map
  drm: don't associate _DRM_DRIVER maps with a master
  drm: simplify kcalloc() call to kzalloc().
  intelfb: fix spelling of "CLOCK"
  drm: fix LOCK_TEST_WITH_RETURN macro
  drm/i915: Hook connector to encoder during load detection (fixes tv/vga detect)
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM: Add empty suspend/resume device irq functions
  PM/Hibernate: Move NVS routines into a seperate file (v2).
  PM/Hibernate: Rename disk.c to hibernate.c
  PM: Separate suspend to RAM functionality from core
  Driver Core: Rework platform suspend/resume, print warning
  PM: Remove device_type suspend()/resume()
  PM/Hibernate: Move memory shrinking to snapshot.c (rev. 2)
  PM/Suspend: Do not shrink memory before suspend
  PM: Remove bus_type suspend_late()/resume_early() V2
  PM core: rename suspend and resume functions
  PM: Rename device_power_down/up()
  PM: Remove unused asm/suspend.h
  x86: unify power/cpu_(32|64).c
  x86: unify power/cpu_(32|64) copyright notes
  x86: unify power/cpu_(32|64) regarding restoring processor state
  x86: unify power/cpu_(32|64) regarding saving processor state
  x86: unify power/cpu_(32|64) global variables
  x86: unify power/cpu_(32|64) headers
  PM: Warn if interrupts are enabled during suspend-resume of sysdevs
  PM/ACPI/x86: Fix sparse warning in arch/x86/kernel/acpi/sleep.c

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: use more NOFS allocation
  dlm: connect to nodes earlier
  dlm: fix use count with multiple joins
  dlm: Make name input parameter of {,dlm_}new_lockspace() const

Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf_counter: Start documenting HAVE_PERF_COUNTERS requirements
  perf_counter: Add forward/backward attribute ABI compatibility
  perf record: Explicity program a default counter
  perf_counter: Remove PERF_TYPE_RAW special casing
  perf_counter: PERF_TYPE_HW_CACHE is a hardware counter too
  powerpc, perf_counter: Fix performance counter event types
  perf_counter/x86: Add a quirk for Atom processors
  perf_counter tools: Remove one L1-data alias

* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (55 commits)
  microblaze: Don't use access_ok for unaligned
  microblaze: remove unused flat_stack_align() definition
  microblaze: Fix problem with early_printk in startup
  microblaze_mmu_v2: Makefiles
  microblaze_mmu_v2: Kconfig update
  microblaze_mmu_v2: stat.h MMU update
  microblaze_mmu_v2: Elf update
  microblaze_mmu_v2: Update dma.h for MMU
  microblaze_mmu_v2: Update cacheflush.h
  microblaze_mmu_v2: Update signal returning address
  microblaze_mmu_v2: Traps MMU update
  microblaze_mmu_v2: Enable fork syscall for MMU and add fork as vfork for noMMU
  microblaze_mmu_v2: Update linker script for MMU
  microblaze_mmu_v2: Add MMU related exceptions handling
  microblaze_mmu_v2: uaccess MMU update
  microblaze_mmu_v2: Update exception handling - MMU exception
  microblaze_mmu_v2: entry.S, entry.h
  microblaze_mmu_v2: Add CURRENT_TASK for entry.S
  microblaze_mmu_v2: MMU asm offset update
  microblaze_mmu_v2: Update tlb.h and tlbflush.h
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (62 commits)
  Blackfin: fix sparseirq/kstat_irqs fallout
  Blackfin: fix unused warnings after nommu update
  Blackfin: export the last exception cause via debugfs
  Blackfin: fix length checking in kgdb_ebin2mem
  Blackfin: kgdb: fix up error return values
  Blackfin: push access_ok() L1 attribute down
  Blackfin: punt duplicated search_exception_table() prototype
  Blackfin: add missing access_ok() checks to user functions
  Blackfin: convert early_printk EVT init to a loop
  Blackfin: document the lsl variants of the L1 allocator
  Blackfin: rename Blackfin relocs according to the toolchain
  Blackfin: check SIC defines rather than variant names
  Blackfin: add SSYNC to set_dma_sg() for descriptor fetching
  Blackfin: convert SMP to only use generic time framework
  Blackfin: bf548-ezkit/bf537-stamp: add resources for ADXL345/346
  Blackfin: override default uClinux MTD addr/size
  Blackfin: fix command line corruption with DEBUG_DOUBLEFAULT
  Blackfin: fix handling of initial L1 reservation
  Blackfin: merge sram init functions
  Blackfin: drop unused reserve_pda() function
  ...

* 'for-linus' of git://linux-arm.org/linux-2.6:
  kmemleak: Add more info to the MAINTAINERS entry
  kmemleak: Remove the kmemleak.h include in drivers/char/vt.c

git commit 0a0c5168 "PM: Introduce functions for suspending and resuming
device interrupts" introduced some helper functions. However these
functions are only available for architectures which support
GENERIC_HARDIRQS.

Other architectures will see this build error:

drivers/built-in.o: In function `sysdev_suspend':
(.text+0x15138): undefined reference to `check_wakeup_irqs'
drivers/built-in.o: In function `device_power_up':
(.text+0x1cb66): undefined reference to `resume_device_irqs'
drivers/built-in.o: In function `device_power_down':
(.text+0x1cb92): undefined reference to `suspend_device_irqs'

To fix this add some empty inline functions for !GENERIC_HARDIRQS.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

The *_nvs_* routines in swsusp.c make use of the io*map()
functions, which are only provided for HAS_IOMEM, thus
breaking compilation if HAS_IOMEM is not set. Fix this
by moving the *_nvs_* routines into hibernate_nvs.c, which
is only compiled if HAS_IOMEM is set.

[rjw: Change the name of the new file to hibernate_nvs.c, add the
 license line to the header comment.]
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Change the name of kernel/power/disk.c to kernel/power/hibernate.c
in analogy with the file names introduced by the changes that
separated the suspend to RAM and standby funtionality from the
common PM functions.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@ucw.cz>

Move the suspend to RAM and standby code from kernel/power/main.c
to two separate files, kernel/power/suspend.c containing the basic
functions and kernel/power/suspend_test.c containing the automatic
suspend test facility based on the RTC clock alarm.

There are no changes in functionality related to these modifications.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@ucw.cz>

This patch reworks the platform driver code for legacy
suspend and resume to avoid installing callbacks in
struct device_driver. A warning is also added telling
users to update the platform driver to use dev_pm_ops.

The functions platform_legacy_suspend()/resume() directly
call suspend and resume callbacks in struct platform_driver
instead of wrapping things in platform_drv_suspend()/resume().
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

This patch removes the legacy callbacks ->suspend() and
->resume() from struct device_type. These callbacks seem
unused, and new code should instead make use of struct
dev_pm_ops.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

A future patch is going to modify the memory shrinking code so that
it will make memory allocations to free memory instead of using an
artificial memory shrinking mechanism for that.  For this purpose it
is convenient to move swsusp_shrink_memory() from
kernel/power/swsusp.c to kernel/power/snapshot.c, because the new
memory-shrinking code is going to use things that are local to
kernel/power/snapshot.c .

[rev. 2: Make some functions static and remove their headers from
 kernel/power/power.h]
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@ucw.cz>
Acked-by: NWu Fengguang <fengguang.wu@intel.com>

Remove the shrinking of memory from the suspend-to-RAM code, where
it is not really necessary.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NNigel Cunningham <nigel@tuxonice.net>
Acked-by: NWu Fengguang <fengguang.wu@intel.com>

Remove the ->suspend_late() and ->resume_early() callbacks
from struct bus_type V2. These callbacks are legacy stuff
at this point and since there seem to be no in-tree users
we may as well remove them. New users should use dev_pm_ops.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Acked-by: NPavel Machek <pavel@ucw.cz>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

This patch (as1241) renames a bunch of functions in the PM core.
Rather than go through a boring list of name changes, suffice it to
say that in the end we have a bunch of pairs of functions:

	device_resume_noirq	dpm_resume_noirq
	device_resume		dpm_resume
	device_complete		dpm_complete
	device_suspend_noirq	dpm_suspend_noirq
	device_suspend		dpm_suspend
	device_prepare		dpm_prepare

in which device_X does the X operation on a single device and dpm_X
invokes device_X for all devices in the dpm_list.

In addition, the old dpm_power_up and device_resume_noirq have been
combined into a single function (dpm_resume_noirq).

Lastly, dpm_suspend_start and dpm_resume_end are the renamed versions
of the former top-level device_suspend and device_resume routines.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Acked-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Rename the functions performing "_noirq" dev_pm_ops
operations from device_power_down() and device_power_up()
to device_suspend_noirq() and device_resume_noirq().

The new function names are chosen to show that the functions
are responsible for calling the _noirq() versions to finalize
the suspend/resume operation. The current function names do
not perform power down/up anymore so the names may be misleading.

Global function renames:
- device_power_down() -> device_suspend_noirq()
- device_power_up() -> device_resume_noirq()

Static function renames:
- suspend_device_noirq() -> __device_suspend_noirq()
- resume_device_noirq() -> __device_resume_noirq()
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Acked-by: NLen Brown <lenb@kernel.org>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

This patch removes unused asm/suspend.h files for
the following architectures:

 alpha, arm, ia64, m68k, mips, s390, um
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

This is the last unification step. Here we do remove one of the files
and rename the left one as cpu.c, as both are now the same.
Also update power/Makefile, telling it to build cpu.o, instead of
cpu_(32|64).o
Signed-off-by: NSergio Luis <sergio@larces.uece.br>
Signed-off-by: NLauro Salmito <laurosalmito@gmail.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

In this step, we do unify the copyright notes for both files
cpu_32.c and cpu_64.c, making such files exactly the same.
It's the last step before the actual unification, that will
rename one of them to cpu.c and remove the other one.
Signed-off-by: NSergio Luis <sergio@larces.uece.br>
Signed-off-by: NLauro Salmito <laurosalmito@gmail.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

In this step we do unify cpu_32.c and cpu_64.c functions that
work on restoring the saved processor state. Also, we do
eliminate the forward declaration of fix_processor_context()
for X86_64, as it's not needed anymore.
Signed-off-by: NSergio Luis <sergio@larces.uece.br>
Signed-off-by: NLauro Salmito <laurosalmito@gmail.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

In this step we do unify cpu_32.c and cpu_64.c functions that
work on saving the processor state.
Signed-off-by: NSergio Luis <sergio@larces.uece.br>
Signed-off-by: NLauro Salmito <laurosalmito@gmail.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>