v3: completely rewritten. We now just remember which areas
    of the PT to clear and do so on the next command submission.

Bug: https://bugs.freedesktop.org/show_bug.cgi?id=79980Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

VM sizes smaller than 1GB doesn't make much sense anyway.

v2: fix typo and grammer
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Need to protect mmio flip programming by event lock as well.

Need to also first enable pflip irq, then mmio program,
otherwise a flip completion may get unnoticed in the vblank
of actual completion if the flip is programmed, but
radeon_flip_work_func gets preempted immediately after
mmio programming and before vblank. In that case the
vblank irq handler wouldn't run radeon_crtc_handle_vblank()
with the completion check routine, miss the completed flip,
and only notice one vblank after actual completion, causing
a false/delayed report of flip completion.
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Not needed anymore, as it is already unreffed within
radeon_flip_work_func() after its only use.
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Otherwise the DRM core and userspace will be confused about which BO the
CRTC is scanning out.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

As well as enabling the vblank interrupt. These shouldn't take any
significant amount of time, but at least pinning the BO has actually been
seen to fail in practice before, in which case we need to let userspace
know about it.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Since 3.16-rc1 we have this new failure:

When the userspace XOrg ddx schedules vblank events to
trigger deferred kms-pageflips, e.g., via the OML_sync_control
extension call glXSwapBuffersMscOML(), or if a glXSwapBuffers()
is called immediately after completion of a previous swapbuffers
call, e.g., in a tight rendering loop with minimal rendering,
it happens frequently that the pageflip ioctl() is executed
within the same vblank in which a previous kms-pageflip completed,
or - for deferred swaps - always one vblank earlier than requested
by the client app.

This causes premature pageflips and detection of failure by
the ddx, e.g., XOrg log warnings like...

"(WW) RADEON(1): radeon_dri2_flip_event_handler: Pageflip
completion event has impossible msc 201025 < target_msc 201026"

... and error/invalid return values of glXWaitForSbcOML() and
Intel_swap_events extension.

Reason is the new way in which kms-pageflips are programmed
since 3.16.

This commit changes the time window in which the hw can
execute pending programmed pageflips. Before, a pending flip
would get executed anywhere within the vblank interval. Now
a pending flip only gets executed at the leading edge of
vblank (start of front porch), making sure that a invocation
of the pageflip ioctl() within a given vblank interval will
only lead to pageflip completion in the following vblank.

Tested to death on a DCE-4 card.
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If the value in the scratch register is 0, set it to the
max level.  This fixes an issue where the console fb blanking
code calls back into the backlight driver on unblank and then
sets the backlight level to 0 after the driver has already
set the mode and enabled the backlight.

bugs:
https://bugs.freedesktop.org/show_bug.cgi?id=81382
https://bugs.freedesktop.org/show_bug.cgi?id=70207Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Tested-by: NDavid Heidelberger <david.heidelberger@ixit.cz>
Cc: stable@vger.kernel.org

In some cases we fetch the edid in the detect() callback
in order to determine what sort of monitor is connected.
If that happens, don't fetch the edid again in the get_modes()
callback or we will leak the edid.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

It reverts commit c745fe61 now that
Cayman is stable since VDDCI fix. Spread spectrum was not the culprit.

This depends on b0880e87
(drm/radeon/dpm: fix vddci setup typo on cayman).
Signed-off-by: NAlexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Need to use the RREG32_SMC() accessor since the register
is an smc indirect index.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Fixes hangs on driver load on some cards.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=76998Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If there are error flags in the aux transaction return
-EIO rather than -EBUSY.  -EIO restarts the whole transaction
while -EBUSY jus retries.  Fixes problematic aux transfers.

Bug:
https://bugs.freedesktop.org/show_bug.cgi?id=80684Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Userspace shouldn't be able to access them.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Volatile bit was in the wrong location.  This bit is
not used at the moment.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This prevents a panic: radeon_crtc_handle_page_flip() could run before
radeon_flip_work_func(), triggering the BUG_ON() in drm_vblank_put().
Tested-by: NDieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We were using the vddc mask rather than the vddci mask.

Bug:
https://bugzilla.kernel.org/show_bug.cgi?id=79071

May also fix:
https://bugs.freedesktop.org/show_bug.cgi?id=69723

Noticed by: Dieter Nützel <Dieter@nuetzel-hh.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

We were using the vddc mask rather than the vddci mask.

Bug:
https://bugzilla.kernel.org/show_bug.cgi?id=79071

Possibly also fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=68571Noticed-by: NJonathan Howard <jonathan@unbiased.name>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

v2: agd5f: compile fix
Signed-off-by: NStefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NStefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Some monitors seem to have problems with deep color enabled, even
though they claim to support it.  I'm not sure if the monitor
need a quirk or if the driver is doing something the monitor doesn't
like.  At this point lets just disable deep color by default like
we did for hdmi audio and work through the bugs so we can eventually
enable it by default.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=80531Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

bapm enabled the GPU and CPU to share TDP headroom.  It was
disabled by default since some laptops hung when it was enabled
in conjunction with dpm.  It seems to be stable on desktop
boards and fixes hangs on boot with dpm enabled on certain
boards, so enable it by default on desktop boards.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=72921Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

bapm allows the GPU and CPU to share TDP.  This allows
for additional performance out of the GPU and CPU when
the headroom is available.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Newer asics shouldn't need any manual adjustment.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Set the default to 600Mhz if it's not set in the bios,
and bump the default to 600Mhz if it's lower than that.

This fixes display issues with certain 4k DP monitors when
using 5.4 Ghz DP clocks.

v2: fix typo.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fixes a regression in 3.16-rc1 compared to 3.15.

The unbalanced calls would presumably result in the page flip interrupts
never getting disabled once they are enabled.
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit 75f36d86.

drm_vblank_get() is necessary to ensure the DRM vblank counter value is
up to date in drm_send_vblank_event().

Seems to fix weston hangs waiting for page flips to complete.
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Make sure we have an HDMI monitor before validating modes with
clocks >165 Mhz on single link connections.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When we have a passive adapter validate the clocks
against the HMDI/DVI limits.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Need to use the adjusted clock on dce8 as well.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=80029Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The hardware lut's only have 256 slots for indexing by a
8 bpc framebuffer. In 10 bpc scanout modes, framebuffer
color values would get truncated to their 8 msb's,
thereby losing the extra precision afforded by a 10 bpc
framebuffer.

To retain full precision, bypass the hw lut in 10 bpc
scanout mode.
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This disambiguates depth 16 formats, such as ARGB1555 and ARGB4444,
and depth 32 formats such as ARGB2101010 and ARGB8888.

This patch also adds support for depth 30 (XRGB2101010) framebuffers.
Signed-off-by: NFredrik Höglund <fredrik@kde.org>
Reviewed-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Tested-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fixes WARN()s from the DRM core since the page flip rework.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=77521Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Updated powertune settings for certain SI asics.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This caused reduced performance for some users with advanced post
processing enabled.  We need a better method to pick the
UVD state based on the amount of post processing required or tune
the advanced post processing to fit within the lower power state
envelope.

This reverts commit 14a9579d.
Cc: "3.15" <stable@vger.kernel.org>

Query to find out how many compute units on a GPU.
Useful for OpenCL usermode drivers.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>