flush_work_sync and flush_work are now the same and flush_work_sync
has been deprecated. This fixes the following warning:

drivers/usb/core/hub.c: In function hub_quiesce:
drivers/usb/core/hub.c:1216:3: warning: flush_work_sync is deprecated (declared at include/linux/workqueue.h:448) [-Wdeprecated-declarations]
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NOctavian Purdila <octavian.purdila@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

ezusb: module license 'unspecified' taints kernel
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'for-usb-linus-2012-10-23' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus

xHCI fixes for 3.7-rc3

Hi Greg,

Here's four bug fixes for 3.7.

The first patch fixes a potential deadlock in the USB port power off code,
and the last two patches fix bugs in the USB 3.0 Link PM patchset.  The
second one is trivial and removes an unnecessary cast.

Sarah Sharp

Merge tag 'fixes-for-v3.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus

usb: fixes for v3.7-rc3

Here's a new set of fixes for v3.7-rc3. It's quite small, only
four patches.

There's one bug fix for the newly added musb-dsps glue layer where
we could be overflowing a buffer when creating the instance name.

NET2272 got a fix for a case where the lock would be left held
when exiting the IRQ handler with error in case of Spurious IRQs.

Renensas USBHS got a DMA stall fix which would cause transfers to
stall forever and a NULL pointer deref fix in case of pipe detach.

xhci_service_interval_to_ns() returns long long
to avoid an overflow. However, the type cast happens
too late. The fix is to force ULL from the beginning.

This patch should be backported to kernels as old as 3.5, that contain
the commit e3567d2c "xhci: Add Intel
U1/U2 timeout policy."
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
CC: stable@vger.kernel.org

An le16 is accessed without conversion.

This patch should be backported to kernels as old as 3.5, that contain
the commit e3567d2c "xhci: Add Intel
U1/U2 timeout policy."
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
CC: stable@vger.kernel.org

renesas_usbhs driver can switch DMA/PIO transfer by using handler,
and each handler have push/pop direction.
But unfortunately, current dma push handler didn't a path
which calls usbhs_pipe_enable(). Thus, dma transfer never happened.
this patch fixes it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

If renesas_usbhs or DMAEngine interrupt didn't happen by a certain cause,
urb->ep will be NULL by usb time out.
Then, host mode will access to it and crash kernel.
This patch fixes it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Add the missing unlock on the error handle path in function
net2272_irq().
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

The res_name is used for the name construction of a DT property as
follows:

  sprintf(res_name, "port%d-mode", id);

Hence, res_name must be at least 11 characters long in order to store
the name including the terminating '\0'.

While at it, use to snprintf() rather than sprintf() when accessing this
buffer.
Reported-by: NDavid Binderman <dcb314@hotmail.com>
Signed-off-by: NDaniel Mack <zonque@gmail.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Struct usb_hub_descriptor.ss.DeviceRemovable has been defined as __le16
and (__force__ __u16) doesn't need.
Signed-off-by: NLan Tianyu <tianyu.lan@intel.com>
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>

usb/xhci: release xhci->lock during turning on/off usb port's acpi power resource and checking the existence of port's power resource

When setting usb port's acpi power resource, there will be some xhci hub requests.
This will cause dead lock since xhci->lock has been held before setting acpi power
resource in the xhci_hub_control(). The usb_acpi_power_manageable() function might
fall into sleep so release xhci->lock before invoking it.
Signed-off-by: NLan Tianyu <tianyu.lan@intel.com>
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>

There is a race condition in the USB hub code with regard to handling
TT clear requests that can get the HCD driver in a deadlock. Usually
when an TT clear request is scheduled it will be executed immediately:

<7>[    6.077583] usb 2-1.3: unlink qh1-0e01/f4d4db00 start 0 [1/2 us]
<3>[    6.078041] usb 2-1: clear tt buffer port 3, a3 ep2 t04048d82
<7>[    6.078299] hub_tt_work:731
<7>[    9.309089] usb 2-1.5: link qh1-0e01/f4d506c0 start 0 [1/2 us]
<7>[    9.324526] ehci_hcd 0000:00:1d.0: reused qh f4d4db00 schedule
<7>[    9.324539] usb 2-1.3: link qh1-0e01/f4d4db00 start 0 [1/2 us]
<7>[    9.341530] usb 1-1.1: link qh4-0e01/f397aec0 start 2 [1/2 us]
<7>[   10.116159] usb 2-1.3: unlink qh1-0e01/f4d4db00 start 0 [1/2 us]
<3>[   10.116459] usb 2-1: clear tt buffer port 3, a3 ep2 t04048d82
<7>[   10.116537] hub_tt_work:731

However, if a suspend operation is triggered before hub_tt_work is
scheduled, hub_quiesce will cancel the work without notifying the HCD
driver:

<3>[   35.033941] usb 2-1: clear tt buffer port 3, a3 ep2 t04048d80
<5>[   35.034022] sd 0:0:0:0: [sda] Stopping disk
<7>[   35.034039] hub 2-1:1.0: hub_suspend
<7>[   35.034067] usb 2-1: unlink qh256-0001/f3b1ab00 start 1 [1/0 us]
<7>[   35.035085] hub 1-0:1.0: hub_suspend
<7>[   35.035102] usb usb1: bus suspend, wakeup 0
<7>[   35.035106] ehci_hcd 0000:00:1a.0: suspend root hub
<7>[   35.035298] hub 2-0:1.0: hub_suspend
<7>[   35.035313] usb usb2: bus suspend, wakeup 0
<7>[   35.035315] ehci_hcd 0000:00:1d.0: suspend root hub
<6>[   35.250017] PM: suspend of devices complete after 216.979 msecs
<6>[   35.250822] PM: late suspend of devices complete after 0.799 msecs
<7>[   35.252343] ehci_hcd 0000:00:1d.0: wakeup: 1
<7>[   35.262923] ehci_hcd 0000:00:1d.0: --> PCI D3hot
<7>[   35.263302] ehci_hcd 0000:00:1a.0: wakeup: 1
<7>[   35.273912] ehci_hcd 0000:00:1a.0: --> PCI D3hot
<6>[   35.274254] PM: noirq suspend of devices complete after 23.442 msecs
<6>[   35.274975] ACPI: Preparing to enter system sleep state S3
<6>[   35.292666] PM: Saving platform NVS memory
<7>[   35.295030] Disabling non-boot CPUs ...
<6>[   35.297351] CPU 1 is now offline
<6>[   35.300345] CPU 2 is now offline
<6>[   35.303929] CPU 3 is now offline
<7>[   35.303931] lockdep: fixing up alternatives.
<6>[   35.304825] Extended CMOS year: 2000

When the device will resume the EHCI driver will get stuck in
ehci_endpoint_disable waiting for the tt_clearing flag to reset:

<0>[   47.610967] usb 2-1.3: **** DPM device timeout ****
<7>[   47.610972]  f2f11c60 00000092 f2f11c0c c10624a5 00000003 f4c6e880 c1c8a4c0 c1c8a4c0
<7>[   47.610983]  15c55698 0000000b f56b34c0 f2a45b70 f4c6e880 00000082 f2a4602c f2f11c30
<7>[   47.610993]  c10787f8 f4cac000 f2a45b70 00000000 f4cac010 f2f11c58 00000046 00000001
<7>[   47.611004] Call Trace:
<7>[   47.611006]  [<c10624a5>] ? sched_clock_cpu+0xf5/0x160
<7>[   47.611019]  [<c10787f8>] ? lock_release_holdtime.part.22+0x88/0xf0
<7>[   47.611026]  [<c103ed46>] ? lock_timer_base.isra.35+0x26/0x50
<7>[   47.611034]  [<c17592d3>] ? schedule_timeout+0x133/0x290
<7>[   47.611044]  [<c175b43e>] schedule+0x1e/0x50
<7>[   47.611051]  [<c17592d8>] schedule_timeout+0x138/0x290
<7>[   47.611057]  [<c10624a5>] ? sched_clock_cpu+0xf5/0x160
<7>[   47.611063]  [<c103e560>] ? usleep_range+0x40/0x40
<7>[   47.611070]  [<c1759445>] schedule_timeout_uninterruptible+0x15/0x20
<7>[   47.611077]  [<c14935f4>] ehci_endpoint_disable+0x64/0x160
<7>[   47.611084]  [<c147d1ee>] ? usb_hcd_flush_endpoint+0x10e/0x1d0
<7>[   47.611092]  [<c1165663>] ? sysfs_add_file+0x13/0x20
<7>[   47.611100]  [<c147d5a9>] usb_hcd_disable_endpoint+0x29/0x40
<7>[   47.611107]  [<c147fafc>] usb_disable_endpoint+0x5c/0x80
<7>[   47.611111]  [<c147fb57>] usb_disable_interface+0x37/0x50
<7>[   47.611116]  [<c1477650>] usb_reset_and_verify_device+0x4b0/0x640
<7>[   47.611122]  [<c1474665>] ? hub_port_status+0xb5/0x100
<7>[   47.611129]  [<c147a975>] usb_port_resume+0xd5/0x220
<7>[   47.611136]  [<c148877f>] generic_resume+0xf/0x30
<7>[   47.611142]  [<c14821a3>] usb_resume+0x133/0x180
<7>[   47.611147]  [<c1473b10>] ? usb_dev_thaw+0x10/0x10
<7>[   47.611152]  [<c1473b1d>] usb_dev_resume+0xd/0x10
<7>[   47.611157]  [<c13baa60>] dpm_run_callback+0x40/0xb0
<7>[   47.611164]  [<c13bdb03>] ? pm_runtime_enable+0x43/0x70
<7>[   47.611171]  [<c13bafc6>] device_resume+0x1a6/0x2c0
<7>[   47.611177]  [<c13ba940>] ? dpm_show_time+0xe0/0xe0
<7>[   47.611183]  [<c13bb0f9>] async_resume+0x19/0x40
<7>[   47.611189]  [<c10580c4>] async_run_entry_fn+0x64/0x160
<7>[   47.611196]  [<c104a244>] ? process_one_work+0x104/0x480
<7>[   47.611203]  [<c104a24c>] ? process_one_work+0x10c/0x480
<7>[   47.611209]  [<c104a2c0>] process_one_work+0x180/0x480
<7>[   47.611215]  [<c104a244>] ? process_one_work+0x104/0x480
<7>[   47.611220]  [<c1058060>] ? async_schedule+0x10/0x10
<7>[   47.611226]  [<c104c15c>] worker_thread+0x11c/0x2f0
<7>[   47.611233]  [<c104c040>] ? manage_workers.isra.27+0x1f0/0x1f0
<7>[   47.611239]  [<c10507f8>] kthread+0x78/0x80
<7>[   47.611244]  [<c1750000>] ? timer_cpu_notify+0xd6/0x20d
<7>[   47.611253]  [<c1050780>] ? __init_kthread_worker+0x60/0x60
<7>[   47.611258]  [<c176357e>] kernel_thread_helper+0x6/0xd
<7>[   47.611283] ------------[ cut here ]------------

This patch changes hub_quiesce behavior to flush the TT clear work
instead of canceling it, to make sure that no TT clear request remains
uncompleted before suspend.
Signed-off-by: NOctavian Purdila <octavian.purdila@intel.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull arm64 fixes from Catalin Marinas:
 "Main changes:
   - AArch64 Linux compilation fixes following 3.7-rc1 changes
     (MODULES_USE_ELF_RELA, update_vsyscall() prototype)
   - Unnecessary register setting in start_thread() (thanks to Al Viro)
   - ptrace fixes"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
  arm64: fix alignment padding in assembly code
  arm64: ptrace: use HW_BREAKPOINT_EMPTY type for disabled breakpoints
  arm64: ptrace: make structure padding explicit for debug registers
  arm64: No need to set the x0-x2 registers in start_thread()
  arm64: Ignore memory blocks below PHYS_OFFSET
  arm64: Fix the update_vsyscall() prototype
  arm64: Select MODULES_USE_ELF_RELA
  arm64: Remove duplicate inclusion of mmu_context.h in smp.c

An interesting effect of using the generic version of linkage.h
is that the padding is defined in terms of x86 NOPs, which can have
even more interesting effects when the assembly code looks like this:

ENTRY(func1)
	mov	x0, xzr
ENDPROC(func1)
	// fall through
ENTRY(func2)
	mov	x0, #1
	ret
ENDPROC(func2)

Admittedly, the code is not very nice. But having code from another
architecture doesn't look completely sane either.

The fix is to add arm64's version of linkage.h, which causes the insertion
of proper AArch64 NOPs.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The min/max call needed to have explicit types on some architectures
(e.g. mn10300). Use clamp_t instead to avoid the warning:

  kernel/sys.c: In function 'override_release':
  kernel/sys.c:1287:10: warning: comparison of distinct pointer types lacks a cast [enabled by default]
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull perf fixes from Ingo Molnar:
 "Assorted small fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf python: Properly link with libtraceevent
  perf hists browser: Add back callchain folding symbol
  perf tools: Fix build on sparc.
  perf python: Link with libtraceevent
  perf python: Initialize 'page_size' variable
  tools lib traceevent: Fix missed freeing of subargs in free_arg() in filter
  lib tools traceevent: Add back pevent assignment in __pevent_parse_format()
  perf hists browser: Fix off-by-two bug on the first column
  perf tools: Remove warnings on JIT samples for srcline sort key
  perf tools: Fix segfault when using srcline sort key
  perf: Require exclude_guest to use PEBS - kernel side enforcement
  perf tool: Precise mode requires exclude_guest

Namhyung Kim reported that the build fails with:

  GEN python/perf.so
  gcc: error: python_ext_build/tmp//../../libtraceevent.a: No such file or directory
  error: command 'gcc' failed with exit status 1
  cp: cannot stat `python_ext_build/lib/perf.so': No such file or directory
  make: *** [python/perf.so] Error 1

We need to propagate the TE_PATH variable to the setup.py file.
Reported-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/n/tip-8umiPbm4sxpknKivbjgykhut@git.kernel.org
[ Fixed superfluous variable build error. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

* The python binding needs to link with libtraceevent and to initialize
  the 'page_size' variable so that mmaping works again.

* The callchain folding character that appears on the TUI just before
  the overhead had disappeared due to recent changes, add it back.

* Intel PEBS in VT-x context uses the DS address as a guest linear address,
  even though its programmed by the host as a host linear address. This either
  results in guest memory corruption and or the hardware faulting and 'crashing'
  the virtual machine.  Therefore we have to disable PEBS on VT-x enter and
  re-enable on VT-x exit, enforcing a strict exclude_guest.

  Kernel side enforcement fix by Peter Zijlstra, tooling side fix by David Ahern.

* Fix build on sparc due to UAPI, fix from David Miller.

* Fixes for the srclike sort key for unresolved symbols and when processing
  samples in JITted code, where we don't have an ELF file, just an special
  symbol table, fixes from Namhyung Kim.

* Fix some leaks in libtraceevent, from Steven Rostedt.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Pull ARM soc fixes from Olof Johansson:
 "A set of fixes and some minor cleanups for -rc2:

   - A series from Arnd that fixes warnings in drivers and other code
     included by ARM defconfigs.  Most have been acked by corresponding
     maintainers (and seem quite hard to argue not picking up anyway in
     the few exception cases).
   - A few misc patches from the list for integrator/vt8500/i.MX
   - A batch of fixes to OMAP platforms, fixing:
     - boot problems on beaglebone,
     - regression fixes for local timers
     - clockdomain locking fixes
     - a few boot/sparse warnings
   - For Tegra:
     - Clock rate calculation overflow fix
     - Revert a change that removed timer clocks and a fix for symbol
       name clashes
   - For Renesas:
     - IO accessor / annotation cleanups to remove warnings
   - For Kirkwood/Dove/mvebu:
     - Fixes for device trees for Dove (some minor cleanups, some fixes)
     - Fixes for the mvebu gpio driver
     - Fix build problem for Feroceon due to missing ifdefs
     - Fix lsxl DTS files"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits)
  ARM: kirkwood: fix buttons on lsxl boards
  ARM: kirkwood: fix LEDs names for lsxl boards
  ARM: Kirkwood: fix disabling CACHE_FEROCEON_L2
  gpio: mvebu: Add missing breaks in mvebu_gpio_irq_set_type
  ARM: dove: Add crypto engine to DT
  ARM: dove: Remove watchdog from DT
  ARM: dove: Restructure SoC device tree descriptor
  ARM: dove: Fix clock names of sata and gbe
  ARM: dove: Fix tauros2 device tree init
  ARM: dove: Add pcie clock support
  ARM: OMAP2+: Allow kernel to boot even if GPMC fails to reserve memory
  ARM: OMAP: clockdomain: Fix locking on _clkdm_clk_hwmod_enable / disable
  ARM: s3c: mark s3c2440_clk_add as __init_refok
  spi/s3c64xx: use correct dma_transfer_direction type
  ARM: OMAP4: devices: fixup OMAP4 DMIC platform device error message
  ARM: OMAP2+: clock data: Add dev-id for the omap-gpmc dummy fck
  ARM: OMAP: resolve sparse warning concerning debug_card_init()
  ARM: OMAP4: Fix twd_local_timer_register regression
  ARM: tegra: add tegra_timer clock
  ARM: tegra: rename tegra system timer
  ...

Emit the magic string that indicates a module has a signature after the
signature data instead of before it.  This allows module_sig_check() to
be made simpler and faster by the elimination of the search for the
magic string.  Instead we just need to do a single memcmp().

This works because at the end of the signature data there is the
fixed-length signature information block.  This block then falls
immediately prior to the magic number.

From the contents of the information block, it is trivial to calculate
the size of the signature data and thus the size of the actual module
data.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

From Jason Cooper:
 - improve #ifdef logic to prevent linker errors with CACHE_FEROCEON_L2
 - lsxl board dts fixes

* tag 'kirkwood_fixes_for_v3.7' of git://git.infradead.org/users/jcooper/linux:
  ARM: kirkwood: fix buttons on lsxl boards
  ARM: kirkwood: fix LEDs names for lsxl boards
  ARM: Kirkwood: fix disabling CACHE_FEROCEON_L2

The module build process no longer creates intermediate files for module
signing, so remove them from .gitignore.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Turn sign-file into perl and merge in x509keyid.  The latter doesn't
need to be a separate script as it doesn't actually need to work out the
SHA1 sum of the X.509 certificate itself, since it can get that from the
X.509 certificate.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'testing/driver-warnings' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into fixes

A collection of warning fixes on non-ARM code from Arnd Bergmann:

* 'testing/driver-warnings' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: s3c: mark s3c2440_clk_add as __init_refok
  spi/s3c64xx: use correct dma_transfer_direction type
  pcmcia: sharpsl: don't discard sharpsl_pcmcia_ops
  USB: EHCI: mark ehci_orion_conf_mbus_windows __devinit
  mm/slob: use min_t() to compare ARCH_SLAB_MINALIGN
  SCSI: ARM: make fas216_dumpinfo function conditional
  SCSI: ARM: ncr5380/oak uses no interrupts

  /proc/<pid>/numa_maps scans vma and show mempolicy under
  mmap_sem. It sometimes accesses task->mempolicy which can
  be freed without mmap_sem and numa_maps can show some
  garbage while scanning.

This patch tries to take reference count of task->mempolicy at reading
numa_maps before calling get_vma_policy(). By this, task->mempolicy
will not be freed until numa_maps reaches its end.

V2->v3
  -  updated comments to be more verbose.
  -  removed task_lock() in numa_maps code.
V1->V2
  -  access task->mempolicy only once and remember it.  Becase kernel/exit.c
     can overwrite it.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull miscellaneous x86 fixes from Peter Anvin:
 "The biggest ones are fixing suspend/resume breakage on 32 bits, and an
  interrim fix for mapping over holes that allows AMD kit with more than
  1 TB.

  A final solution for the latter is in the works, but involves some
  fairly invasive changes that will probably mean it will only be
  appropriate for 3.8."

* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, MCE: Remove bios_cmci_threshold sysfs attribute
  x86, amd, mce: Avoid NULL pointer reference on CPU northbridge lookup
  x86: Exclude E820_RESERVED regions and memory holes above 4 GB from direct mapping.
  x86/cache_info: Use ARRAY_SIZE() in amd_l3_attrs()
  x86/reboot: Remove quirk entry for SBC FITPC
  x86, suspend: Correct the restore of CR4, EFER; skip computing EFLAGS.ID

Merge misc fixes from Andrew Morton:
 "Seven fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (7 patches)
  lib/dma-debug.c: fix __hash_bucket_find()
  mm: compaction: correct the nr_strict va isolated check for CMA
  firmware/memmap: avoid type conflicts with the generic memmap_init()
  pidns: remove recursion from free_pid_ns()
  drivers/video/backlight/lm3639_bl.c: return proper error in lm3639_bled_mode_store() error paths
  kernel/sys.c: fix stack memory content leak via UNAME26
  linux/coredump.h needs asm/siginfo.h

If there is only one match, the unique matched entry should be returned.

Without the fix, the upcoming dma debug interfaces ("dma-debug: new
interfaces to debug dma mapping errors") can't work reliably because
only device and dma_addr are passed to dma_mapping_error().
Signed-off-by: NMing Lei <ming.lei@canonical.com>
Reported-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Tested-by: NShuah Khan <shuah.khan@hp.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Thierry reported that the "iron out" patch for isolate_freepages_block()
had problems due to the strict check being too strict with "mm:
compaction: Iron out isolate_freepages_block() and
isolate_freepages_range() -fix1".  It's possible that more pages than
necessary are isolated but the check still fails and I missed that this
fix was not picked up before RC1.  This same problem has been identified
in 3.7-RC1 by Tony Prisk and should be addressed by the following patch.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Tested-by: NTony Prisk <linux@prisktech.co.nz>
Reported-by: NThierry Reding <thierry.reding@avionic-design.de>
Acked-by: NRik van Riel <riel@redhat.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Cc: Richard Davies <richard@arachsys.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix this build error:

  drivers/firmware/memmap.c:240:19: error: conflicting types for 'memmap_init'
  arch/ia64/include/asm/pgtable.h:565:17: note: previous declaration of 'memmap_init' was here
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Cc: Bernhard Walle <bwalle@suse.de>
Cc: Glauber Costa <glommer@parallels.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

free_pid_ns() operates in a recursive fashion:

free_pid_ns(parent)
  put_pid_ns(parent)
    kref_put(&ns->kref, free_pid_ns);
      free_pid_ns

thus if there was a huge nesting of namespaces the userspace may trigger
avalanche calling of free_pid_ns leading to kernel stack exhausting and a
panic eventually.

This patch turns the recursion into an iterative loop.

Based on a patch by Andrew Vagin.

[akpm@linux-foundation.org: export put_pid_ns() to modules]
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: Andrew Vagin <avagin@openvz.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Calling uname() with the UNAME26 personality set allows a leak of kernel
stack contents.  This fixes it by defensively calculating the length of
copy_to_user() call, making the len argument unsigned, and initializing
the stack buffer to zero (now technically unneeded, but hey, overkill).

CVE-2012-0957
Reported-by: NPaX Team <pageexec@freemail.hu>
Signed-off-by: NKees Cook <keescook@chromium.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: PaX Team <pageexec@freemail.hu>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 5ab1c309 ("coredump: pass siginfo_t* to do_coredump() and
below, not merely signr") added siginfo_t to linux/coredump.h but forgot
to include asm/siginfo.h.  This breaks the build for UML/i386.  (And any
other arch where asm/siginfo.h is not magically preincluded...)

  In file included from arch/x86/um/elfcore.c:2:0: include/linux/coredump.h:15:25: error: unknown type name 'siginfo_t'
  make[1]: *** [arch/x86/um/elfcore.o] Error 1
Signed-off-by: NRichard Weinberger <richard@nod.at>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Amerigo Wang <amwang@redhat.com>
Cc: "Jonathan M. Foote" <jmfoote@cert.org>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In commit 0b173bc4 ("mm: kill vma flag VM_CAN_NONLINEAR") we
replaced the VM_CAN_NONLINEAR test with checking whether the mapping has
a '->remap_pages()' vm operation, but there is no guarantee that there
it even has a vm_ops pointer at all.

Add the appropriate test for NULL vm_ops.
Reported-by: NSasha Levin <levinsasha928@gmail.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull Xtensa patchset from Chris Zankel:
 "These are all limited to the xtensa subtree and include some important
  changes (adding long missing system calls for newer libc versions and
  other fixes) and the UAPI changes"

* tag 'xtensa-next-20121018' of git://github.com/czankel/xtensa-linux:
  xtensa: add missing system calls to the syscall table
  xtensa: minor compiler warning fix
  xtensa: Use Kbuild infrastructure to handle asm-generic headers
  UAPI: (Scripted) Disintegrate arch/xtensa/include/asm
  xtensa: fix unaligned usermode access
  xtensa: reorganize SR referencing
  xtensa: fix boot parameters parsing
  xtensa: fix missing return in do_page_fault for SIGBUS case
  xtensa: copy_thread with CLONE_VM must not copy live parent AR windows
  xtensa: fix memmove(), bcopy(), and memcpy().
  xtensa: ISS: fix rs_put_char
  xtensa: ISS: fix specific simcalls

Rusty had clearly not actually tested his module signing changes that I
(trustingly) applied as commit e2a666d5 ("kbuild: sign the modules
at install time"). That commit had multiple bugs:

 - using "${#VARIABLE}" to get the number of characters in a shell
   variable may look clever, but it's locale-dependent: it returns the
   number of *characters*, not bytes. And we do need bytes.

   So don't use "${#..}" expansion, do the stupid "wc -c" thing instead
   (where "c" stands for "bytes", not "characters", despite the letter.

 - Rusty had confused "siglen" and "signerlen", and his conversion
   didn't set "signerlen" at all, and incorrectly set "siglen" to the
   size of the signer, not the size of the signature.

End result: the modified sign-file script did create something that
superficially *looked* like a signature, but didn't actually work at
all, and would fail the signature check. Oops.

Tssk, tssk, Rusty.

But Rusty was definitely right that this whole thing should be rewritten
in perl by somebody who has the perl-fu to do so.  That is not me,
though - I'm just doing an emergency fix for the shell script.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit cb6b6df1 ("xen/pv-on-hvm kexec: add quirk for Xen 3.4 and
shutdown watches.") added the xen_strict_xenbus_quirk() function with an
old K&R-style declaration without proper typing, causing gcc to rightly
complain:

  drivers/xen/xenbus/xenbus_xs.c:628:13: warning: function declaration isn’t a prototype [-Wstrict-prototypes]

because we really don't live in caves using stone-age tools any more,
and the kernel has always used properly typed ANSI C function
declarations.

So if a function doesn't take arguments, we tell the compiler so
explicitly by adding the proper "void" in the prototype.

I'm sure there are tons of other examples of this kind of stuff in the
tree, but this is the one that hits my workstation config, so..
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>