This driver support many composite USB devices where the
interface class/subclass/protocol provides no information
about the interface function. Interfaces with different
functions may all use ff/ff/ff, like this example of
a device with three serial interfaces and three QMI/wwan
interfaces:

T:  Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=116 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1199 ProdID=68a2 Rev= 0.06
S:  Manufacturer=Sierra Wireless, Incorporated
S:  Product=MC7710
S:  SerialNumber=3581780xxxxxx
C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=85(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#=19 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=87(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#=20 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=89(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms

Instead of class/subclass/protocol the vendor use fixed
interface numbers for each function, and the Windows
drivers use these numbers to match driver and function.

The driver has had its own interface number whitelisting
code to simulate this functionality.  Replace this with
generic interface number matching now that the USB subsystem
support is there. This
 - removes the need for a driver_info structure per
   interface number,
 - avoids running the probe function for unsupported
   interfaces, and
 - simplifies the code.
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are at least 4 implementations of netcat with the BSD-based
being the only one that has to be used without the -p switch to
specify the listening port.

Jan Engelhardt suggested to add an example for socat(1).
Signed-off-by: NDirk Gouders <gouders@et.bocholt.fh-gelsenkirchen.de>
Signed-off-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

napi->poll() needs IRQ enabled, so we have to re-enable IRQ before
calling it.

Cc: David Miller <davem@davemloft.net>
Signed-off-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Without this patch, I can't get netconsole logs remotely over
vlan. The reason is probably we don't handle vlan tags in either
netpoll tx or rx path.

I am not sure if I use these vlan functions correctly, at
least this patch works.

Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Clean up vlan_dev_hard_start_xmit() function.

Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To be consistent, s/info/vlan/.

Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These functions are just boolean, let them return
bool instead of int.

Cc: David Miller <davem@davemloft.net>
Signed-off-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Although this doesn't matter actually, because netpoll_tx_running()
doesn't use the parameter, the code will be more readable.

For team_dev_queue_xmit() we have to move it down to avoid
compile errors.

Cc: David Miller <davem@davemloft.net>
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We don't delete 'p' from the list in the loop,
so we can just use list_for_each_entry().

Cc: David Miller <davem@davemloft.net>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add comments on why we don't notify NETDEV_RELEASE.

Cc: David Miller <davem@davemloft.net>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes several problems in the call path of
netpoll_send_skb_on_dev():

1. Disable IRQ's before calling netpoll_send_skb_on_dev().

2. All the callees of netpoll_send_skb_on_dev() should use
   rcu_dereference_bh() to dereference ->npinfo.

3. Rename arp_reply() to netpoll_arp_reply(), the former is too generic.

Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The logic of the code is same, just call netpoll_rx_on().

Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In __netpoll_rx(), it dereferences ->npinfo without rcu_dereference_bh(),
this patch fixes it by using the 'npinfo' passed from netpoll_rx()
where it is already dereferenced with rcu_dereference_bh().

Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With the previous patch applied, __netpoll_cleanup() is non-block now,
so we don't need to release the spin_lock before calling it.

Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Like the previous patch, slave_disable_netpoll() and __netpoll_cleanup()
may be called with read_lock() held too, so we should make them
non-block, by moving the cleanup and kfree() to call_rcu_bh() callbacks.

Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

slave_enable_netpoll() and __netpoll_setup() may be called
with read_lock() held, so should use GFP_ATOMIC to allocate
memory. Eric suggested to pass gfp flags to __netpoll_setup().

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NCong Wang <amwang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull s390 patches from Martin Schwidefsky:
 "Included are bug fixes and a patch to enable system call filtering
  with BPF."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/compat: fix mmap compat system calls
  s390/compat: fix compat wrappers for process_vm system calls
  s390: do not clobber personality flags in sys_32_personality()
  s390/seccomp: add support for system call filtering using BPF
  s390/sclp_sdias: Add missing break and "fall through"
  s390/mm: remove MAX_PHYSADDR_BITS define

Pull drm fixes from Dave Airlie:
 "Radeon and intel fixes mostly, one fix to the mgag200 driver to not
  hang on certain server variants."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (32 commits)
  drm/radeon: fix typo in function header comment
  drm/radeon/kms: implement timestamp userspace query (v2)
  drm/radeon/kms: add MSAA texture support for r600-evergreen
  drm/radeon/kms: reorder code in r600_check_texture_resource
  drm/radeon: fence virtual address and free it once idle v4
  drm/radeon: fix some missing parens in asic macros
  drm/radeon: add some new SI pci ids
  drm/radeon: fix ordering in pll picking on dce4+
  drm/radeon: do not reenable crtc after moving vram start address
  drm/radeon: fix bank tiling parameters on cayman
  drm/radeon: fix bank tiling parameters on evergreen
  drm/radeon: fix bank tiling parameters on SI
  drm/radeon: properly handle crtc powergating
  drm/radeon: properly handle SS overrides on TN (v2)
  drm/radeon/dce4+: set a more reasonable cursor watermark
  drm/radeon: fix handling for ddc type 5 on combios
  drm/mgag200: fix G200ER pll picking algorithm
  drm/edid: Fix potential memory leak in edid_load()
  drm/udl: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1]
  drm/radeon/kms: allow "invalid" DB formats as a means to disable DB
  ...

Commit 72121572 ("GPIO: gpio-pxa: fix devicetree functions") added an
"xlate" function pointer to the irq_domain_ops, but this function is nor
declared or defined anywhere when CONFIG_OF is disabled, causing the
build error:

  drivers/gpio/gpio-pxa.c:532:11: error: 'irq_domain_xlate_twocell' undeclared here (not in a function)

Extending the DT-only code section to cover the irq_domain_ops and the
pxa_gpio_dt_ids solves this problem and makes it clearer which code is
actually used without DT.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Alex Deucher writes:
This is the current set of radeon fixes for 3.6.  Nothing too major.

Highlights:
- various display fixes
- some SI fixes
- new SI pci ids
- major VM fix
- CS checker support for MSAA

I've tested on a number of cards across generations and noticed no problems.

* 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: fix typo in function header comment
  drm/radeon/kms: implement timestamp userspace query (v2)
  drm/radeon/kms: add MSAA texture support for r600-evergreen
  drm/radeon/kms: reorder code in r600_check_texture_resource
  drm/radeon: fence virtual address and free it once idle v4
  drm/radeon: fix some missing parens in asic macros
  drm/radeon: add some new SI pci ids
  drm/radeon: fix ordering in pll picking on dce4+
  drm/radeon: do not reenable crtc after moving vram start address
  drm/radeon: fix bank tiling parameters on cayman
  drm/radeon: fix bank tiling parameters on evergreen
  drm/radeon: fix bank tiling parameters on SI
  drm/radeon: properly handle crtc powergating
  drm/radeon: properly handle SS overrides on TN (v2)
  drm/radeon/dce4+: set a more reasonable cursor watermark
  drm/radeon: fix handling for ddc type 5 on combios

Signed-off-by: NDmitrii Cherkasov <DCherkasov@luxsoft.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Returns a snapshot of the GPU clock counter.  Needed
for certain OpenGL extensions.

v2: agd5f
- address Jerome's comments
- add function documentation
Signed-off-by: NMarek Olšák <maraeo@gmail.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Most of the checking seems to be in place already. As you can see,
log2(number of samples) resides in LAST_LEVEL.

This is required for MSAA support (namely for depth-stencil resolve and
blitting between MSAA resources).
Signed-off-by: NMarek Olšák <maraeo@gmail.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NMarek Olšák <maraeo@gmail.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Virtual address need to be fenced to know when we can safely remove it.
This patch also properly clear the pagetable. Previously it was
serouisly broken.

Kernel 3.5/3.4 need a similar patch but adapted for difference in mutex locking.

v2: For to update pagetable when unbinding bo (don't bailout if
    bo_va->valid is true).
v3: Add kernel 3.5/3.4 comment.
v4: Fix compilation warnings.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Better safe than sorry.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

No functional change, but re-order the cases so they
evaluate properly due to the way the DCE macros work.

Noticed by kallisti5 on IRC.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It seems we can not update the crtc scanout address. After disabling
crtc, update to base address do not take effect after crtc being
reenable leading to at least frame being scanout from the old crtc
base address. Disabling crtc display request lead to same behavior.

So after changing the vram address if we don't keep crtc disabled
we will have the GPU trying to read some random system memory address
with some iommu this will broke the crtc engine and will lead to
broken display and iommu error message.

So to avoid this, disable crtc. For flicker less boot we will need
to avoid moving the vram start address.

This patch should also fix :

https://bugs.freedesktop.org/show_bug.cgi?id=42373

Cc: <stable@vger.kernel.org>
Signed-off-by: NJerome Glisse <jglisse@redhat.com>

Handle the 16 bank case.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Handle the 16 bank case.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The sixteen bank case wasn't handled here, leading to GPU
crashes because of userspace miscalculation.
Signed-off-by: NChristian König <deathsimple@vodafone.de>
Cc: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Need to make sure the crtc is gated on before modesetting.
Explicitly gate the crtc on in prepare() and set a flag
so that the dpms functions don't gate it off during
mode set.

Noticed by sylware on IRC.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The IntegratedSystemInfo table changed versions
on TN.  Update the SS override lookup to handle it.

v2: fix copy-paste typo.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Set a more reasonable default cursor watermark. The
recommended default value is 4.  This should reduce
urgency requests to the MC form the display hw.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When ddc type is 5, need to look up the i2c channel
in the i2c table.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Pull leds fixes/revert from Bryan Wu.

* 'fixes-for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
  leds: renesas: fix error handling
  Revert "leds: use led_set_brightness in led_trigger_event"
  leds: lp8788: Fix updating scale configuration bits

bfe4c041 "leds: convert Renesas TPU LED driver to devm_kzalloc() and
cleanup error exit path" introduced a possible case in which r_tpu_probe
calls iounmap on a wild pointer. This changes the one case that was
missed in the same way as the other error paths.

Without this patch, building kota2_defconfig results in:

drivers/leds/leds-renesas-tpu.c: In function 'r_tpu_probe':
drivers/leds/leds-renesas-tpu.c:246:6: warning: 'ret' may be used uninitialized in this function [-Wuninitialized]
drivers/leds/leds-renesas-tpu.c:308:17: warning: 'p' may be used uninitialized in this function [-Wuninitialized]
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Magnus Damm <damm@opensource.se>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

This reverts commit a0193cbe.

The problem with the original commit was that it caused a warning with
the MMC trigger calling del_timer_sync from hard-irq context.
Signed-off-by: NFabio Baltieri <fabio.baltieri@gmail.com>
Reported-by: NPawel Moll <pawel.moll@arm.com>
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>

Pull networking changes from David Miller:
 "Most importantly this should cure the ipv4-mapped ipv6 socket TCP
  crashes some people were seeing, otherwise:

   1) Fix e1000e autonegotiation handling regression, from Tushar Dave.

   2) Fix TX data corruption race on e1000e down, also from Tushar Dave.

   3) Fix bfin_sir IRDA driver build, from Sonic Zhang.

   4) AF_PACKET mmap() tests a flag in the TX ring shared between
      userspace and the kernel for an internal consistency check.  It
      really shouldn't do this to validate the kernel's own behavior
      because the user can corrupt it to be any value at all.  From
      Daniel Borkmann.

   5) Fix TCP metrics leak on netns dismantle, from Eric Dumazet.

   6) Orphan the anonymous TCP socket from the SKB in
      ip_send_unicast_reply() so that the rest of the stack needn't see
      it.  Otherwise we get selinux problems of all sorts, from Eric
      Dumazet.

      This is the best way to fix this since the socket is just a place
      holder for sending packets in a context where we have no real
      socket at all.

   7) Fix TUN detach crashes, from Stanislav Kinsbursky.

   8) dev_set_alias() leaks memory on krealloc() failure, from Alexey
      Khoroshilov.

   9) FIB trie must use call_rcu() not call_rcu_bh(), because this code
      is not universally invoked from software interrupts.  From Eric
      Dumazet.

  10) PPTP looks up ipv4 routes with the wrong network namespace, fix
      from Gao Feng."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits)
  bnx2x: Fix compiler warnings
  af_packet: remove BUG statement in tpacket_destruct_skb
  macvtap: rcu_dereference outside read-lock section
  codel: refine one condition to avoid a nul rec_inv_sqrt
  ixgbe: add missing braces
  ipv4: fix ip_send_skb()
  net: tcp: ipv6_mapped needs sk_rx_dst_set method
  ipv4: tcp: unicast_sock should not land outside of TCP stack
  bnx2x: Fix recovery flow cleanup during probe
  bnx2x: fix unload previous driver flow when flr-capable
  tun: don't zeroize sock->file on detach
  igb: Fix register defines for all non-82575 hardware
  e1000e: fix panic while dumping packets on Tx hang with IOMMU
  igb: fix panic while dumping packets on Tx hang with IOMMU
  tcp: must free metrics at net dismantle
  net/stmmac: mark probe function as __devinit
  lpc_eth: remove obsolete ifdefs
  net/core: Fix potential memory leak in dev_set_alias()
  cdc-phonet: Don't leak in usbpn_open
  batman-adv: Fix mem leak in the batadv_tt_local_event() function
  ...