The firmware provides the location and size of the nvram
in the device tree, so it does not really contain any
hardware specific bits and could be used on other
machines as well.
Signed-off-by: NArnd Bergmann <arndb@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The pSeries_progress function is called from some places in the rtas code,
which may also be used by non-pSeries platforms.
Though pSeries is currently the only platform type that implements
display-character, the code is actually generic enough to be part of
the rtas subsystem.

I hit a bug here because the generic rtas code tried calling ppc_md.progress,
which points to an __init function on most platforms.

We could also clear the ppc_md.progress pointer when freeing the init memory
to make it more explicit that ppc_md.progress must not be called after
bootup.
Signed-off-by: NArnd Bergmann <arndb@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

BPA is using rtas for PCI but should not be confused by
pSeries code. This also avoids some #ifdefs. Other
platforms that want to use rtas_pci.c could create
their own platform_pci.c with platform specific fixups.
Signed-off-by: NArnd Bergmann <arndb@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The rtc rtas functions are not pSeries specific but can
also be used by BPA and other SLOF based platforms
Signed-off-by: NArnd Bergmann <arndb@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

pSeries and maple have almost the same code for calibrate_decr,
and BPA would need yet another copy. Instead, I'm moving the
code to arch/ppc64/kernel/time.c.

Some of the related declarations were missing from header
files, so I'm moving those as well.

It makes sense to merge this with the pmac function of the
same name, so we end up having just one implemetation for
iSeries and one for Open Firmware based machines.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Allow the SMT bit to be set/reset at boot, like the ALTIVEC bit.  This
means we will enable SMT on unknown cpus that support it.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently we dynamically allocate the fake parent device for all devices on
the vio bus.  This patch statically allocates it.  This also allows us to
reuse it for the iSeries "generic" vio device (that is used for passing to
dma routines when communicating with the hypervisor without a device
involved).  Also unexport vio_bus_type as it is never used in modules.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch allows iSeries to build with CONFIG_PCI=n.  This is useful for
partitions that have only virtual I/O.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch just removes some dead code, fixes messages that referred to the
file this code used to be in and inserts XmPciLpEvent_init into its caller.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch just merges XmPciLpEvent.c into iSeries_irq.c (the only caller of
its only external function).  XmPciLpEvent.c just contained the lowlevel
iSeries irq code.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch is just simple cleanups to the iSeries irq code.
	- whitespace and comments
	- rearrange some functions to avoid forward declarations
	- remove XmPciLpEvent.h as its functions were declared elsewhere
	- remove decaration of function that no longer exists
No semantic changes.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The AgentId, PhbId, FrameId, CardLocation and Location members of
iSeries_Device_Node are stored early in the boot process just so that a
message about the device can be printed later in the boot process.  Remove
them and construct the message by doing the VPD parsing at the time the
message is printed.

Also remove a few unused defines in iSeries_VpdInfo.c.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The IoRetry member of iSeries_Devide_Node is really only used locally, so
remove it and replace it with a local variable.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove no longer used things from iSeries_pci.h.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Clean up iSeries_VpdInfo.c:
	- white space and comment fixes
	- make a function static
	- the functions here are only called from iSeries_pci.c, so
	  CONFIG_PCI will be set (so remove check)
	- only build when CONFIG_PCI is set
	- remove unneeded includes and cast
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The file arch/ppc64/kernel/iSeries_pci_reset contains only one function that
is not use anywhere (any more).  Remove it.  This function is the only user of
the ReturnCode member of iSeries_Device_Node, so remove that as well.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Last of this round of the iSeries header cleanups
	- don't have two defines for the same thing (HvMaxArchitectedLps
	  and HvMaxArchitectedVirtualLans)
	- HvCallSc.h only needs linux/types.h
	- remove unused struct definition
	- add "extern" to some more function declarations
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch removes some unused bits from HvCall.h and some unneeded #includes
from other files.  Also includes ItLpQueue.h in paca.h in preference to a stub
declaration of struct ItLpQueue.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Just white space cleaups and move process_iSeries_events into its only caller.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch removes from the iSeries header files a large number of inline
functions that are not used.  It also changes the only caller of a HvCallCfg
function that is outside HvLpConfig.h to its equivalent HvLpConfig function
and no longer includes HvCallCfg.h where it is not needed.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

include/asm-ppc64/iSeries/LparData.h just included a whole lot of other files
to declare variables that would be better declared in those other files.  So,
remove it.  This will reduce that number of things needed to be included in
most cases to access the relevant variables.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

include/asm-ppc64/iSeries/iSeries_proc.h just contains a declaration of a
function that no longer exists.  Remove it.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently ppc64 has two mm_structs for the kernel, init_mm and also
ioremap_mm.  The latter really isn't necessary: this patch abolishes it,
instead restricting vmallocs to the lower 1TB of the init_mm's range and
placing io mappings in the upper 1TB.  This simplifies the code in a number
of places and eliminates an unecessary set of pagetables.  It also tweaks
the unmap/free path a little, allowing us to remove the unmap_im_area() set
of page table walkers, replacing them with unmap_vm_area().
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch implements a number of smp_processor_id() cleanup ideas that
Arjan van de Ven and I came up with.

The previous __smp_processor_id/_smp_processor_id/smp_processor_id API
spaghetti was hard to follow both on the implementational and on the
usage side.

Some of the complexity arose from picking wrong names, some of the
complexity comes from the fact that not all architectures defined
__smp_processor_id.

In the new code, there are two externally visible symbols:

 - smp_processor_id(): debug variant.

 - raw_smp_processor_id(): nondebug variant. Replaces all existing
   uses of _smp_processor_id() and __smp_processor_id(). Defined
   by every SMP architecture in include/asm-*/smp.h.

There is one new internal symbol, dependent on DEBUG_PREEMPT:

 - debug_smp_processor_id(): internal debug variant, mapped to
                             smp_processor_id().

Also, i moved debug_smp_processor_id() from lib/kernel_lock.c into a new
lib/smp_processor_id.c file.  All related comments got updated and/or
clarified.

I have build/boot tested the following 8 .config combinations on x86:

 {SMP,UP} x {PREEMPT,!PREEMPT} x {DEBUG_PREEMPT,!DEBUG_PREEMPT}

I have also build/boot tested x64 on UP/PREEMPT/DEBUG_PREEMPT.  (Other
architectures are untested, but should work just fine.)
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NArjan van de Ven <arjan@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NYani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

A fairly recent platform requirement states that the OS must clear the
whole TCE table at setup time, in case firmware left any active
mappings in it.  Without this initialization, dynamic bus removes can
fail.  Firmware rejects these requests if active mappings still exist 
for a slot that has been deallocated by the OS.
Signed-off-by: NJohn Rose <johnrose@austin.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Use the new cpu_has_feature macros instead of open coding it.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Some rtasd printks were too loud. They would appear on a quiet boot
even though they were only informational.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This patch fixes some bugs in the ppc64 PER_LINUX32 implementation,
noted by Juergen Kreileder:

* uname(2) doesn't respect PER_LINUX32, it returns 'ppc64' instead of 'ppc'
* Child processes of a PER_LINUX32 process don't inherit PER_LINUX32

Along the way I took the opportunity to move things around so that
sys_ppc32.c only has 32-bit syscall emulation functions and to remove
the obsolete "fakeppc" command line option.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove spurious MSR_SE reset during kprobe processing.
single_step_exception() already does it for us.  Reset it to be safe when
executing the fault_handler.
Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add stricter checks during kprobe registration.  Return correct error value so
insmod doesn't succeed.  Also printk reason for registration failure.
Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Kprobes was eating the hardware instruction and data address
breakpoint exceptions.  This patch fixes it; kprobes doesn't use those
exceptions at all and should ignore them.
Signed-off-by: NAnanth N Mavinakayanahalli <amavin@redhat.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A typo in prom_find_machine_type from Ben's recent patch "ppc64: Fix
result code handling in prom_init" prevents pSeries LPAR systems from
booting.

Tested on a pSeries 570 and OpenPower 720 (both Power5 LPAR).
Signed-off-by: NNathan Lynch <ntl@pobox.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Now that we have HZ=1000 there is much less of a need for decr_overclock.
Remove it.

Leave spread_lpevents but move it into iSeries_setup.c.  We should look at
making event spreading the default some day.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Acked-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The iseries has a bar graph on the front panel that shows how busy it is.
The operating system sets and clears a bit in the CTRL register to control
it.

Instead of going to the complexity of using a thread info bit, just set and
clear it in the idle loop.

Also create two helper functions, ppc64_runlatch_on and ppc64_runlatch_off.

Finally don't use the short form of the SPR defines.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Acked-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

prom_init(), the trampoline code that "talks" to Open Firmware during
early boot, has various issues with managing OF result codes. Some of my
recent fixups in fact made the problem worse on some platforms.

This patch reworks it all. Tested on g5, Maple, POWER3 and POWER5.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This cleans up the /proc/device-tree representation of the Open Firmware
device-tree on ppc and ppc64.  It does the following things:

 - Workaround an issue in some Apple device-trees where a property may
   exist with the same name as a child node of the parent.  We now
   simply "drop" the property instead of creating duplicate entries in
   /proc with random result...

 - Do not try to chop off the "@0" at the end of a node name whose unit
   address is 0.  This is not useful, inconsistent, and the code was
   buggy and didn't always work anyway.

 - Do not create symlinks for the short name and unit address parts of a
   node.  These were never really used, bloated the memory footprint of
   the device-tree with useless struct proc_dir_entry and their matching
   dentry and inode cache bloat.

This results in smaller code, smaller memory footprint, and a more
accurate view of the tree presented to userland.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Apple's Open Firmware has a funny bug when creating the /cpus nodes
where it leaves a dangling '\0' character in the CPU name which ends up
appearing in the full path of the node. This is bogus and
confuses /proc/device-tree badly.

This patch strips those bogus zero's from the node full path when
reading the device-tree from Open Firmware. The "name" property is not
modified and still contains the spurrious 0 (it basically contains 0
tailing 0 instead of one) but that shouldn't be a problem.

An equivalent patch for ppc32 will follow shortly
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We used to have an iseries specific profiler that used /proc/profile.  Now
thats gone we can use the generic timer based stuff.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Acked-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When I sent in the patch adding the code for the kernel to tell the
firmware about its capabilities on pSeries machines, I included the
function to give the capabilities to firmware but somehow forgot the
hunk that adds the call to the new function.  This patch adds the
call.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>