- 13 2月, 2015 40 次提交
-
-
由 Rasmus Villemoes 提交于
__FUNCTION__ hasn't been treated as a string literal since gcc 3.4, so this only helps people who only test-compile using 3.3 (compiler-gcc3.h barks at anything older than that). Besides, there are almost no occurrences of __FUNCTION__ left in the tree. [akpm@linux-foundation.org: convert remaining __FUNCTION__ references] Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Cyril Bur 提交于
On POWER8 virtualised kernels the VTB register can be read to have a view of time that only increases while the guest is running. This will prevent guests from seeing time jump if a guest is paused for significant amounts of time. On POWER7 and below virtualised kernels stolen time is subtracted from local_clock as a best effort approximation. This will not eliminate spurious warnings in the case of a suspended guest but may reduce the occurance in the case of softlockups due to host over commit. Bare metal kernels should avoid reading the VTB as KVM does not restore sane values when not executing, the approxmation is fine as host kernels won't observe any stolen time. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NCyril Bur <cyrilbur@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Andrew Jones <drjones@redhat.com> Acked-by: NDon Zickus <dzickus@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ulrich Obergfell <uobergfe@redhat.com> Cc: chai wen <chaiw.fnst@cn.fujitsu.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: Ben Zhang <benzh@chromium.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Cyril Bur 提交于
When the hypervisor pauses a virtualised kernel the kernel will observe a jump in timebase, this can cause spurious messages from the softlockup detector. Whilst these messages are harmless, they are accompanied with a stack trace which causes undue concern and more problematically the stack trace in the guest has nothing to do with the observed problem and can only be misleading. Futhermore, on POWER8 this is completely avoidable with the introduction of the Virtual Time Base (VTB) register. This patch (of 2): This permits the use of arch specific clocks for which virtualised kernels can use their notion of 'running' time, not the elpased wall time which will include host execution time. Signed-off-by: NCyril Bur <cyrilbur@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Andrew Jones <drjones@redhat.com> Acked-by: NDon Zickus <dzickus@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ulrich Obergfell <uobergfe@redhat.com> Cc: chai wen <chaiw.fnst@cn.fujitsu.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: Ben Zhang <benzh@chromium.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
Everybody uses unsigned long for pgoff_t, and no one ever overrode the definition of pgoff_t. Keep it that way, and remove the option of overriding it. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrey Skvortsov 提交于
Have git ignore the Debian directory created when running: make tar-pkg / targz-pkg / tarbz2-pkg / tarxz-pkg Signed-off-by: NAndrey Skvortsov <andrej.skvortzov@gmail.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andy Lutomirski 提交于
If an attacker can cause a controlled kernel stack overflow, overwriting the restart block is a very juicy exploit target. This is because the restart_block is held in the same memory allocation as the kernel stack. Moving the restart block to struct task_struct prevents this exploit by making the restart_block harder to locate. Note that there are other fields in thread_info that are also easy targets, at least on some architectures. It's also a decent simplification, since the restart code is more or less identical on all architectures. [james.hogan@imgtec.com: metag: align thread_info::supervisor_stack] Signed-off-by: NAndy Lutomirski <luto@amacapital.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: David Miller <davem@davemloft.net> Acked-by: NRichard Weinberger <richard@nod.at> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Steven Miao <realmz6@gmail.com> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Tested-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andy Shevchenko 提交于
Instead of custom approach let's use string_escape_str() to escape a given string (task_name in this case). Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rafael Aquini 提交于
The output of /proc/$pid/numa_maps is in terms of number of pages like anon=22 or dirty=54. Here's some output: 7f4680000000 default file=/hugetlb/bigfile anon=50 dirty=50 N0=50 7f7659600000 default file=/anon_hugepage\040(deleted) anon=50 dirty=50 N0=50 7fff8d425000 default stack anon=50 dirty=50 N0=50 Looks like we have a stack and a couple of anonymous hugetlbfs areas page which both use the same amount of memory. They don't. The 'bigfile' uses 1GB pages and takes up ~50GB of space. The anon_hugepage uses 2MB pages and takes up ~100MB of space while the stack uses normal 4k pages. You can go over to smaps to figure out what the page size _really_ is with KernelPageSize or MMUPageSize. But, I think this is a pretty nasty and counterintuitive interface as it stands. This patch introduces 'kernelpagesize_kB' line element to /proc/<pid>/numa_maps report file in order to help identifying the size of pages that are backing memory areas mapped by a given task. This is specially useful to help differentiating between HUGE and GIGANTIC page backed VMAs. This patch is based on Dave Hansen's proposal and reviewer's follow-ups taken from the following dicussion threads: * https://lkml.org/lkml/2011/9/21/454 * https://lkml.org/lkml/2014/12/20/66Signed-off-by: NRafael Aquini <aquini@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Hansen <dave.hansen@intel.com> Acked-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rafael Aquini 提交于
Add a small section to proc.txt doc in order to document its /proc/pid/numa_maps interface. It does not introduce any functional changes, just documentation. Signed-off-by: NRafael Aquini <aquini@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexander Kuleshov 提交于
Use the PDE() helper to get proc_dir_entry instead of coding it directly. Signed-off-by: NAlexander Kuleshov <kuleshovmail@gmail.com> Acked-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Petr Cermak 提交于
Peak resident size of a process can be reset back to the process's current rss value by writing "5" to /proc/pid/clear_refs. The driving use-case for this would be getting the peak RSS value, which can be retrieved from the VmHWM field in /proc/pid/status, per benchmark iteration or test scenario. [akpm@linux-foundation.org: clarify behaviour in documentation] Signed-off-by: NPetr Cermak <petrcermak@chromium.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Primiano Tucci <primiano@chromium.org> Cc: Petr Cermak <petrcermak@chromium.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rickard Strandqvist 提交于
Remove the function search_one_table() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: NRickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Cc: David Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ganesh Mahendran 提交于
Keeping fragmentation of zsmalloc in a low level is our target. But now we still need to add the debug code in zsmalloc to get the quantitative data. This patch adds a new configuration CONFIG_ZSMALLOC_STAT to enable the statistics collection for developers. Currently only the objects statatitics in each class are collected. User can get the information via debugfs. cat /sys/kernel/debug/zsmalloc/zram0/... For example: After I copied "jdk-8u25-linux-x64.tar.gz" to zram with ext4 filesystem: class size obj_allocated obj_used pages_used 0 32 0 0 0 1 48 256 12 3 2 64 64 14 1 3 80 51 7 1 4 96 128 5 3 5 112 73 5 2 6 128 32 4 1 7 144 0 0 0 8 160 0 0 0 9 176 0 0 0 10 192 0 0 0 11 208 0 0 0 12 224 0 0 0 13 240 0 0 0 14 256 16 1 1 15 272 15 9 1 16 288 0 0 0 17 304 0 0 0 18 320 0 0 0 19 336 0 0 0 20 352 0 0 0 21 368 0 0 0 22 384 0 0 0 23 400 0 0 0 24 416 0 0 0 25 432 0 0 0 26 448 0 0 0 27 464 0 0 0 28 480 0 0 0 29 496 33 1 4 30 512 0 0 0 31 528 0 0 0 32 544 0 0 0 33 560 0 0 0 34 576 0 0 0 35 592 0 0 0 36 608 0 0 0 37 624 0 0 0 38 640 0 0 0 40 672 0 0 0 42 704 0 0 0 43 720 17 1 3 44 736 0 0 0 46 768 0 0 0 49 816 0 0 0 51 848 0 0 0 52 864 14 1 3 54 896 0 0 0 57 944 13 1 3 58 960 0 0 0 62 1024 4 1 1 66 1088 15 2 4 67 1104 0 0 0 71 1168 0 0 0 74 1216 0 0 0 76 1248 0 0 0 83 1360 3 1 1 91 1488 11 1 4 94 1536 0 0 0 100 1632 5 1 2 107 1744 0 0 0 111 1808 9 1 4 126 2048 4 4 2 144 2336 7 3 4 151 2448 0 0 0 168 2720 15 15 10 190 3072 28 27 21 202 3264 0 0 0 254 4096 36209 36209 36209 Total 37022 36326 36288 We can calculate the overall fragentation by the last line: Total 37022 36326 36288 (37022 - 36326) / 37022 = 1.87% Also by analysing objects alocated in every class we know why we got so low fragmentation: Most of the allocated objects is in <class 254>. And there is only 1 page in class 254 zspage. So, No fragmentation will be introduced by allocating objs in class 254. And in future, we can collect other zsmalloc statistics as we need and analyse them. Signed-off-by: NGanesh Mahendran <opensource.ganesh@gmail.com> Suggested-by: NMinchan Kim <minchan@kernel.org> Acked-by: NMinchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Dan Streetman <ddstreet@ieee.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ganesh Mahendran 提交于
Currently the underlay of zpool: zsmalloc/zbud, do not know who creates them. There is not a method to let zsmalloc/zbud find which caller they belong to. Now we want to add statistics collection in zsmalloc. We need to name the debugfs dir for each pool created. The way suggested by Minchan Kim is to use a name passed by caller(such as zram) to create the zsmalloc pool. /sys/kernel/debug/zsmalloc/zram0 This patch adds an argument `name' to zs_create_pool() and other related functions. Signed-off-by: NGanesh Mahendran <opensource.ganesh@gmail.com> Acked-by: NMinchan Kim <minchan@kernel.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Dan Streetman <ddstreet@ieee.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sergey Senozhatsky 提交于
`struct zram' contains both `struct gendisk' and `struct request_queue'. the latter can be deleted, because zram->disk carries ->queue pointer, and ->queue carries zram pointer: create_device() zram->queue->queuedata = zram zram->disk->queue = zram->queue zram->disk->private_data = zram so zram->queue is not needed, we can access all necessary data anyway. Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Minchan Kim 提交于
Admin could reset zram during I/O operation going on so we have used zram->init_lock as read-side lock in I/O path to prevent sudden zram meta freeing. However, the init_lock is really troublesome. We can't do call zram_meta_alloc under init_lock due to lockdep splat because zram_rw_page is one of the function under reclaim path and hold it as read_lock while other places in process context hold it as write_lock. So, we have used allocation out of the lock to avoid lockdep warn but it's not good for readability and fainally, I met another lockdep splat between init_lock and cpu_hotplug from kmem_cache_destroy during working zsmalloc compaction. :( Yes, the ideal is to remove horrible init_lock of zram in rw path. This patch removes it in rw path and instead, add atomic refcount for meta lifetime management and completion to free meta in process context. It's important to free meta in process context because some of resource destruction needs mutex lock, which could be held if we releases the resource in reclaim context so it's deadlock, again. As a bonus, we could remove init_done check in rw path because zram_meta_get will do a role for it, instead. Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: NMinchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Ganesh Mahendran <opensource.ganesh@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Minchan Kim 提交于
bd_holders is increased only when user open the device file as FMODE_EXCL so if something opens zram0 as !FMODE_EXCL and request I/O while another user reset zram0, we can see following warning. zram0: detected capacity change from 0 to 64424509440 Buffer I/O error on dev zram0, logical block 180823, lost async page write Buffer I/O error on dev zram0, logical block 180824, lost async page write Buffer I/O error on dev zram0, logical block 180825, lost async page write Buffer I/O error on dev zram0, logical block 180826, lost async page write Buffer I/O error on dev zram0, logical block 180827, lost async page write Buffer I/O error on dev zram0, logical block 180828, lost async page write Buffer I/O error on dev zram0, logical block 180829, lost async page write Buffer I/O error on dev zram0, logical block 180830, lost async page write Buffer I/O error on dev zram0, logical block 180831, lost async page write Buffer I/O error on dev zram0, logical block 180832, lost async page write ------------[ cut here ]------------ WARNING: CPU: 11 PID: 1996 at fs/block_dev.c:57 __blkdev_put+0x1d7/0x210() Modules linked in: CPU: 11 PID: 1996 Comm: dd Not tainted 3.19.0-rc6-next-20150202+ #1125 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x45/0x57 warn_slowpath_common+0x8a/0xc0 warn_slowpath_null+0x1a/0x20 __blkdev_put+0x1d7/0x210 blkdev_put+0x50/0x130 blkdev_close+0x25/0x30 __fput+0xdf/0x1e0 ____fput+0xe/0x10 task_work_run+0xa7/0xe0 do_notify_resume+0x49/0x60 int_signal+0x12/0x17 ---[ end trace 274fbbc5664827d2 ]--- The warning comes from bdev_write_node in blkdev_put path. static void bdev_write_inode(struct inode *inode) { spin_lock(&inode->i_lock); while (inode->i_state & I_DIRTY) { spin_unlock(&inode->i_lock); WARN_ON_ONCE(write_inode_now(inode, true)); <========= here. spin_lock(&inode->i_lock); } spin_unlock(&inode->i_lock); } The reason is dd process encounters I/O fails due to sudden block device disappear so in filemap_check_errors in __writeback_single_inode returns -EIO. If we check bd_openers instead of bd_holders, we could address the problem. When I see the brd, it already have used it rather than bd_holders so although I'm not a expert of block layer, it seems to be better. I can make following warning with below simple script. In addition, I added msleep(2000) below set_capacity(zram->disk, 0) after applying your patch to make window huge(Kudos to Ganesh!) script: echo $((60<<30)) > /sys/block/zram0/disksize setsid dd if=/dev/zero of=/dev/zram0 & sleep 1 setsid echo 1 > /sys/block/zram0/reset Signed-off-by: NMinchan Kim <minchan@kernel.org> Acked-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Ganesh Mahendran <opensource.ganesh@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sergey Senozhatsky 提交于
We need to return set_capacity(disk, 0) from reset_store() back to zram_reset_device(), a catch by Ganesh Mahendran. Potentially, we can race set_capacity() calls from init and reset paths. The problem is that zram_reset_device() is also getting called from zram_exit(), which performs operations in misleading reversed order -- we first create_device() and then init it, while zram_exit() perform destroy_device() first and then does zram_reset_device(). This is done to remove sysfs group before we reset device, so we can continue with device reset/destruction not being raced by sysfs attr write (f.e. disksize). Apart from that, destroy_device() releases zram->disk (but we still have ->disk pointer), so we cannot acces zram->disk in later zram_reset_device() call, which may cause additional errors in the future. So, this patch rework and cleanup destroy path. 1) remove several unneeded goto labels in zram_init() 2) factor out zram_init() error path and zram_exit() into destroy_devices() function, which takes the number of devices to destroy as its argument. 3) remove sysfs group in destroy_devices() first, so we can reorder operations -- reset device (as expected) goes before disk destroy and queue cleanup. So we can always access ->disk in zram_reset_device(). 4) and, finally, return set_capacity() back under ->init_lock. [akpm@linux-foundation.org: tweak comment] Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Reported-by: NGanesh Mahendran <opensource.ganesh@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sergey Senozhatsky 提交于
Ganesh Mahendran was the first one who proposed to use bdev->bd_mutex to avoid ->bd_holders race condition: CPU0 CPU1 umount /* zram->init_done is true */ reset_store() bdev->bd_holders == 0 mount ... zram_make_request() zram_reset_device() However, his solution required some considerable amount of code movement, which we can avoid. Apart from using bdev->bd_mutex in reset_store(), this patch also simplifies zram_reset_device(). zram_reset_device() has a bool parameter reset_capacity which tells it whether disk capacity and itself disk should be reset. There are two zram_reset_device() callers: -- zram_exit() passes reset_capacity=false -- reset_store() passes reset_capacity=true So we can move reset_capacity-sensitive work out of zram_reset_device() and perform it unconditionally in reset_store(). This also lets us drop reset_capacity parameter from zram_reset_device() and pass zram pointer only. Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Reported-by: NGanesh Mahendran <opensource.ganesh@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ganesh Mahendran 提交于
zram_meta_alloc() and zram_meta_free() are a pair. In zram_meta_alloc(), meta table is allocated. So it it better to free it in zram_meta_free(). Signed-off-by: NGanesh Mahendran <opensource.ganesh@gmail.com> Acked-by: NMinchan Kim <minchan@kernel.org> Acked-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sergey Senozhatsky 提交于
A trivial cleanup of zram_meta_alloc() error handling. Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: NMinchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
The vmstat interfaces are good at hiding negative counts (at least when CONFIG_SMP); but if you peer behind the curtain, you find that nr_isolated_anon and nr_isolated_file soon go negative, and grow ever more negative: so they can absorb larger and larger numbers of isolated pages, yet still appear to be zero. I'm happy to avoid a congestion_wait() when too_many_isolated() myself; but I guess it's there for a good reason, in which case we ought to get too_many_isolated() working again. The imbalance comes from isolate_migratepages()'s ISOLATE_ABORT case: putback_movable_pages() decrements the NR_ISOLATED counts, but we forgot to call acct_isolated() to increment them. It is possible that the bug whcih this patch fixes could cause OOM kills when the system still has a lot of reclaimable page cache. Fixes: edc2ca61 ("mm, compaction: move pageblock checks up from isolate_migratepages_range()") Signed-off-by: NHugh Dickins <hughd@google.com> Acked-by: NVlastimil Babka <vbabka@suse.cz> Acked-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com> Cc: <stable@vger.kernel.org> [3.18+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Naoya Horiguchi 提交于
A race condition starts to be visible in recent mmotm, where a PG_hwpoison flag is set on a migration source page *before* it's back in buddy page poo= l. This is problematic because no page flag is supposed to be set when freeing (see __free_one_page().) So the user-visible effect of this race is that it could trigger the BUG_ON() when soft-offlining is called. The root cause is that we call lru_add_drain_all() to make sure that the page is in buddy, but that doesn't work because this function just schedule= s a work item and doesn't wait its completion. drain_all_pages() does drainin= g directly, so simply dropping lru_add_drain_all() solves this problem. Fixes: f15bdfa8 ("mm/memory-failure.c: fix memory leak in successful soft offlining") Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Chen Gong <gong.chen@linux.intel.com> Cc: <stable@vger.kernel.org> [3.11+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yaowei Bai 提交于
Add a necessary 'leave'. Signed-off-by: NYaowei Bai <bywxiaobai@163.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Grazvydas Ignotas 提交于
For whatever reason, generic_access_phys() only remaps one page, but actually allows to access arbitrary size. It's quite easy to trigger large reads, like printing out large structure with gdb, which leads to a crash. Fix it by remapping correct size. Fixes: 28b2ee20 ("access_process_vm device memory infrastructure") Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rasmus Villemoes 提交于
The only caller of cpuset_init_current_mems_allowed is the __init annotated build_all_zonelists_init, so we can also make the former __init. Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: David Rientjes <rientjes@google.com> Cc: Vishnu Pratap Singh <vishnu.ps@samsung.com> Cc: Pintu Kumar <pintu.k@samsung.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rasmus Villemoes 提交于
mminit_loglevel is only referenced from __init and __meminit functions, so we can mark it __meminitdata. Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: David Rientjes <rientjes@google.com> Cc: Vishnu Pratap Singh <vishnu.ps@samsung.com> Cc: Pintu Kumar <pintu.k@samsung.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rasmus Villemoes 提交于
The only caller of mminit_verify_zonelist is build_all_zonelists_init, which is annotated with __init, so it should be safe to also mark the former as __init, saving ~400 bytes of .text. Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: David Rientjes <rientjes@google.com> Cc: Vishnu Pratap Singh <vishnu.ps@samsung.com> Cc: Pintu Kumar <pintu.k@samsung.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rasmus Villemoes 提交于
Pulling the code protected by if (system_state == SYSTEM_BOOTING) into its own helper allows us to shrink .text a little. This relies on build_all_zonelists already having a __ref annotation. Add a comment explaining why so one doesn't have to track it down through git log. The real saving comes in 3/5, ("mm/mm_init.c: Mark mminit_verify_zonelist as __init"), where we save about 400 bytes Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: David Rientjes <rientjes@google.com> Cc: Vishnu Pratap Singh <vishnu.ps@samsung.com> Cc: Pintu Kumar <pintu.k@samsung.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rasmus Villemoes 提交于
All users of mminit_dprintk pass a compile-time constant as level, so this just makes gcc emit a single printk call instead of two. Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: David Rientjes <rientjes@google.com> Cc: Vishnu Pratap Singh <vishnu.ps@samsung.com> Cc: Pintu Kumar <pintu.k@samsung.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kirill A. Shutemov 提交于
mm->nr_pmds doesn't make sense on !MMU configurations Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vladimir Davydov 提交于
Move memcg_socket_limit_enabled decrement to tcp_destroy_cgroup (called from memcg_destroy_kmem -> mem_cgroup_sockets_destroy) and zap a bunch of wrapper functions. Although this patch moves static keys decrement from __mem_cgroup_free to mem_cgroup_css_free, it does not introduce any functional changes, because the keys are incremented on setting the limit (tcp or kmem), which can only happen after successful mem_cgroup_css_online. Signed-off-by: NVladimir Davydov <vdavydov@parallels.com> Cc: Glauber Costa <glommer@parallels.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujtisu.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: David S. Miller <davem@davemloft.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by: NMichal Hocko <mhocko@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joonsoo Kim 提交于
Currently, freepage isolation in one pageblock doesn't consider how many freepages we isolate. When I traced flow of compaction, compaction sometimes isolates more than 256 freepages to migrate just 32 pages. In this patch, freepage isolation is stopped at the point that we have more isolated freepage than isolated page for migration. This results in slowing down free page scanner and make compaction success rate higher. stress-highalloc test in mmtests with non movable order 7 allocation shows increase of compaction success rate. Compaction success rate (Compaction success * 100 / Compaction stalls, %) 27.13 : 31.82 pfn where both scanners meets on compaction complete (separate test due to enormous tracepoint buffer) (zone_start=4096, zone_end=1048576) 586034 : 654378 In fact, I didn't fully understand why this patch results in such good result. There was a guess that not used freepages are released to pcp list and on next compaction trial we won't isolate them again so compaction success rate would decrease. To prevent this effect, I tested with adding pcp drain code on release_freepages(), but, it has no good effect. Anyway, this patch reduces waste time to isolate unneeded freepages so seems reasonable. Vlastimil said: : I briefly tried it on top of the pivot-changing series and with order-9 : allocations it reduced free page scanned counter by almost 10%. No effect : on success rates (maybe because pivot changing already took care of the : scanners meeting problem) but the scanning reduction is good on its own. : : It also explains why e14c720e ("mm, compaction: remember position : within pageblock in free pages scanner") had less than expected : improvements. It would only actually stop within pageblock in case of : async compaction detecting contention. I guess that's also why the : infinite loop problem fixed by 1d5bfe1f affected so relatively few : people. Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: NVlastimil Babka <vbabka@suse.cz> Tested-by: NVlastimil Babka <vbabka@suse.cz> Reviewed-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joonsoo Kim 提交于
What we want to check here is whether there is highorder freepage in buddy list of other migratetype in order to steal it without fragmentation. But, current code just checks cc->order which means allocation request order. So, this is wrong. Without this fix, non-movable synchronous compaction below pageblock order would not stopped until compaction is complete, because migratetype of most pageblocks are movable and high order freepage made by compaction is usually on movable type buddy list. There is some report related to this bug. See below link. http://www.spinics.net/lists/linux-mm/msg81666.html Although the issued system still has load spike comes from compaction, this makes that system completely stable and responsive according to his report. stress-highalloc test in mmtests with non movable order 7 allocation doesn't show any notable difference in allocation success rate, but, it shows more compaction success rate. Compaction success rate (Compaction success * 100 / Compaction stalls, %) 18.47 : 28.94 Fixes: 1fb3f8ca ("mm: compaction: capture a suitable high-order page immediately when it is made available") Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: NVlastimil Babka <vbabka@suse.cz> Reviewed-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> [3.7+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vladimir Davydov 提交于
To speed up further allocations SLUB may store empty slabs in per cpu/node partial lists instead of freeing them immediately. This prevents per memcg caches destruction, because kmem caches created for a memory cgroup are only destroyed after the last page charged to the cgroup is freed. To fix this issue, this patch resurrects approach first proposed in [1]. It forbids SLUB to cache empty slabs after the memory cgroup that the cache belongs to was destroyed. It is achieved by setting kmem_cache's cpu_partial and min_partial constants to 0 and tuning put_cpu_partial() so that it would drop frozen empty slabs immediately if cpu_partial = 0. The runtime overhead is minimal. From all the hot functions, we only touch relatively cold put_cpu_partial(): we make it call unfreeze_partials() after freezing a slab that belongs to an offline memory cgroup. Since slab freezing exists to avoid moving slabs from/to a partial list on free/alloc, and there can't be allocations from dead caches, it shouldn't cause any overhead. We do have to disable preemption for put_cpu_partial() to achieve that though. The original patch was accepted well and even merged to the mm tree. However, I decided to withdraw it due to changes happening to the memcg core at that time. I had an idea of introducing per-memcg shrinkers for kmem caches, but now, as memcg has finally settled down, I do not see it as an option, because SLUB shrinker would be too costly to call since SLUB does not keep free slabs on a separate list. Besides, we currently do not even call per-memcg shrinkers for offline memcgs. Overall, it would introduce much more complexity to both SLUB and memcg than this small patch. Regarding to SLAB, there's no problem with it, because it shrinks per-cpu/node caches periodically. Thanks to list_lru reparenting, we no longer keep entries for offline cgroups in per-memcg arrays (such as memcg_cache_params->memcg_caches), so we do not have to bother if a per-memcg cache will be shrunk a bit later than it could be. [1] http://thread.gmane.org/gmane.linux.kernel.mm/118649/focus=118650Signed-off-by: NVladimir Davydov <vdavydov@parallels.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vladimir Davydov 提交于
It is supposed to return 0 if the cache has no remaining objects and 1 otherwise, while currently it always returns 0. Fix it. Signed-off-by: NVladimir Davydov <vdavydov@parallels.com> Acked-by: NChristoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vladimir Davydov 提交于
SLUB's version of __kmem_cache_shrink() not only removes empty slabs, but also tries to rearrange the partial lists to place slabs filled up most to the head to cope with fragmentation. To achieve that, it allocates a temporary array of lists used to sort slabs by the number of objects in use. If the allocation fails, the whole procedure is aborted. This is unacceptable for the kernel memory accounting extension of the memory cgroup, where we want to make sure that kmem_cache_shrink() successfully discarded empty slabs. Although the allocation failure is utterly unlikely with the current page allocator implementation, which retries GFP_KERNEL allocations of order <= 2 infinitely, it is better not to rely on that. This patch therefore makes __kmem_cache_shrink() allocate the array on stack instead of calling kmalloc, which may fail. The array size is chosen to be equal to 32, because most SLUB caches store not more than 32 objects per slab page. Slab pages with <= 32 free objects are sorted using the array by the number of objects in use and promoted to the head of the partial list, while slab pages with > 32 free objects are left in the end of the list without any ordering imposed on them. Signed-off-by: NVladimir Davydov <vdavydov@parallels.com> Acked-by: NChristoph Lameter <cl@linux.com> Acked-by: NPekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Huang Ying <ying.huang@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vladimir Davydov 提交于
Now, the only reason to keep kmemcg_id till css free is list_lru, which uses it to distribute elements between per-memcg lists. However, it can be easily sorted out - we only need to change kmemcg_id of an offline cgroup to its parent's id, making further list_lru_add()'s add elements to the parent's list, and then move all elements from the offline cgroup's list to the one of its parent. It will work, because a racing list_lru_del() does not need to know the list it is deleting the element from. It can decrement the wrong nr_items counter though, but the ongoing reparenting will fix it. After list_lru reparenting is done we are free to release kmemcg_id saving a valuable slot in a per-memcg array for new cgroups. Signed-off-by: NVladimir Davydov <vdavydov@parallels.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vladimir Davydov 提交于
Currently, the isolate callback passed to the list_lru_walk family of functions is supposed to just delete an item from the list upon returning LRU_REMOVED or LRU_REMOVED_RETRY, while nr_items counter is fixed by __list_lru_walk_one after the callback returns. Since the callback is allowed to drop the lock after removing an item (it has to return LRU_REMOVED_RETRY then), the nr_items can be less than the actual number of elements on the list even if we check them under the lock. This makes it difficult to move items from one list_lru_one to another, which is required for per-memcg list_lru reparenting - we can't just splice the lists, we have to move entries one by one. This patch therefore introduces helpers that must be used by callback functions to isolate items instead of raw list_del/list_move. These are list_lru_isolate and list_lru_isolate_move. They not only remove the entry from the list, but also fix the nr_items counter, making sure nr_items always reflects the actual number of elements on the list if checked under the appropriate lock. Signed-off-by: NVladimir Davydov <vdavydov@parallels.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vladimir Davydov 提交于
We need to look up a kmem_cache in ->memcg_params.memcg_caches arrays only on allocations, so there is no need to have the array entries set until css free - we can clear them on css offline. This will allow us to reuse array entries more efficiently and avoid costly array relocations. Signed-off-by: NVladimir Davydov <vdavydov@parallels.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-