Btrfs needs to be able to control how filemap_write_and_wait_range() is called
in fsync to make it less of a painful operation, so push down taking i_mutex and
the calling of filemap_write_and_wait() down into the ->fsync() handlers.  Some
file systems can drop taking the i_mutex altogether it seems, like ext3 and
ocfs2.  For correctness sake I just pushed everything down in all cases to make
sure that we keep the current behavior the same for everybody, and then each
individual fs maintainer can make up their mind about what to do from there.
Thanks,
Acked-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

In order to handle SEEK_HOLE/SEEK_DATA we need to implement our own llseek.
Basically for the normal SEEK_*'s we will just defer to the generic helper, and
for SEEK_HOLE/SEEK_DATA we will use our fiemap helper to figure out the nearest
hole or data.  Currently this helper doesn't check for delalloc bytes for
prealloc space, so for now treat prealloc as data until that is fixed.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

not used in the instances anymore.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

There are three missed mount options settable by user which are not
currently displayed in mount output.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

It was pointed out by 'make versioncheck' that some includes of
linux/version.h were not needed in fs/ (fs/btrfs/ctree.h and
fs/omfs/file.c).

This patch removes them.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Acked-by: NBob Copeland <me@bobcopeland.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Removes code no longer used. The sysfs file itself is kept, because the
btrfs developers expressed interest in putting new entries to sysfs.
Signed-off-by: NMaarten Lankhorst <m.b.lankhorst@gmail.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The recent commit to get rid of our trans_mutex introduced
some races with block group relocation.  The problem is that relocation
needs to do some record keeping about each root, and it was relying
on the transaction mutex to coordinate things in subtle ways.

This fix adds a mutex just for the relocation code and makes sure
it doesn't have a big impact on normal operations.  The race is
really fixed in btrfs_record_root_in_trans, which is where we
step back and wait for the relocation code to finish accounting
setup.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

wrap checking of filesystem 'closing' flag and fix a few missing memory
barriers.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

This makes the inode map cache default to off until we
fix the overflow problem when the free space crcs don't fit
inside a single page.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Tell the filesystem if we just updated timestamp (I_DIRTY_SYNC) or
anything else, so that the filesystem can track internally if it
needs to push out a transaction for fdatasync or not.

This is just the prototype change with no user for it yet.  I plan
to push large XFS changes for the next merge window, and getting
this trivial infrastructure in this window would help a lot to avoid
tree interdependencies.

Also remove incorrect comments that ->dirty_inode can't block.  That
has been changed a long time ago, and many implementations rely on it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This will detect small random writes into files and
queue the up for an auto defrag process.  It isn't well suited to
database workloads yet, but works for smaller files such as rpm, sqlite
or bdb databases.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

240f62c8 replaced the node_lock with rcu_read_lock, but forgot
to remove the actual lock in the data structure. Remove it here.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Originally this was going to be used as a way to give hints to the allocator,
but frankly we can get much better hints elsewhere and it's not even used at all
for anything usefull.  In addition to be completely useless, when we initialize
an inode we try and find a freeish block group to set as the inodes block group,
and with a completely full 40gb fs this takes _forever_, so I imagine with say
1tb fs this is just unbearable.  So just axe the thing altoghether, we don't
need it and it saves us 8 bytes in the inode and saves us 500 microseconds per
inode lookup in my testcase.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

The ceph guys keep running into problems where we have space reserved in our
orphan block rsv when freeing it up.  This is because they tend to do snapshots
alot, so their truncates tend to use a bunch of space, so when we go to do
things like update the inode we have to steal reservation space in order to make
the reservation happen.  This happens because truncate can use as much space as
it freaking feels like, but we still have to hold space for removing the orphan
item and updating the inode, which will definitely always happen.  So in order
to fix this we need to split all of the reservation stuf up.  So with this patch
we have

1) The orphan block reserve which only holds the space for deleting our orphan
item when everything is over.

2) The truncate block reserve which gets allocated and used specifically for the
space that the truncate will use on a per truncate basis.

3) The transaction will always have 1 item's worth of data reserved so we can
update the inode normally.

Hopefully this will make the ceph problem go away.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

We use trans_mutex for lots of things, here's a basic list

1) To serialize trans_handles joining the currently running transaction
2) To make sure that no new trans handles are started while we are committing
3) To protect the dead_roots list and the transaction lists

Really the serializing trans_handles joining is not too hard, and can really get
bogged down in acquiring a reference to the transaction.  So replace the
trans_mutex with a trans_lock spinlock and use it to do the following

1) Protect fs_info->running_transaction.  All trans handles have to do is check
this, and then take a reference of the transaction and keep on going.
2) Protect the fs_info->trans_list.  This doesn't get used too much, basically
it just holds the current transactions, which will usually just be the currently
committing transaction and the currently running transaction at most.
3) Protect the dead roots list.  This is only ever processed by splicing the
list so this is relatively simple.
4) Protect the fs_info->reloc_ctl stuff.  This is very lightweight and was using
the trans_mutex before, so this is a pretty straightforward change.
5) Protect fs_info->no_trans_join.  Because we don't hold the trans_lock over
the entirety of the commit we need to have a way to block new people from
creating a new transaction while we're doing our work.  So we set no_trans_join
and in join_transaction we test to see if that is set, and if it is we do a
wait_on_commit.
6) Make the transaction use count atomic so we don't need to take locks to
modify it when we're dropping references.
7) Add a commit_lock to the transaction to make sure multiple people trying to
commit the same transaction don't race and commit at the same time.
8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl
trans.

I have tested this with xfstests, but obviously it is a pretty hairy change so
lots of testing is greatly appreciated.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>

Changelog V5 -> V6:
- Fix oom when the memory load is high, by storing the delayed nodes into the
  root's radix tree, and letting btrfs inodes go.

Changelog V4 -> V5:
- Fix the race on adding the delayed node to the inode, which is spotted by
  Chris Mason.
- Merge Chris Mason's incremental patch into this patch.
- Fix deadlock between readdir() and memory fault, which is reported by
  Itaru Kitayama.

Changelog V3 -> V4:
- Fix nested lock, which is reported by Itaru Kitayama, by updating space cache
  inode in time.

Changelog V2 -> V3:
- Fix the race between the delayed worker and the task which does delayed items
  balance, which is reported by Tsutomu Itoh.
- Modify the patch address David Sterba's comment.
- Fix the bug of the cpu recursion spinlock, reported by Chris Mason

Changelog V1 -> V2:
- break up the global rb-tree, use a list to manage the delayed nodes,
  which is created for every directory and file, and used to manage the
  delayed directory name index items and the delayed inode item.
- introduce a worker to deal with the delayed nodes.

Compare with Ext3/4, the performance of file creation and deletion on btrfs
is very poor. the reason is that btrfs must do a lot of b+ tree insertions,
such as inode item, directory name item, directory name index and so on.

If we can do some delayed b+ tree insertion or deletion, we can improve the
performance, so we made this patch which implemented delayed directory name
index insertion/deletion and delayed inode update.

Implementation:
- introduce a delayed root object into the filesystem, that use two lists to
  manage the delayed nodes which are created for every file/directory.
  One is used to manage all the delayed nodes that have delayed items. And the
  other is used to manage the delayed nodes which is waiting to be dealt with
  by the work thread.
- Every delayed node has two rb-tree, one is used to manage the directory name
  index which is going to be inserted into b+ tree, and the other is used to
  manage the directory name index which is going to be deleted from b+ tree.
- introduce a worker to deal with the delayed operation. This worker is used
  to deal with the works of the delayed directory name index items insertion
  and deletion and the delayed inode update.
  When the delayed items is beyond the lower limit, we create works for some
  delayed nodes and insert them into the work queue of the worker, and then
  go back.
  When the delayed items is beyond the upper bound, we create works for all
  the delayed nodes that haven't been dealt with, and insert them into the work
  queue of the worker, and then wait for that the untreated items is below some
  threshold value.
- When we want to insert a directory name index into b+ tree, we just add the
  information into the delayed inserting rb-tree.
  And then we check the number of the delayed items and do delayed items
  balance. (The balance policy is above.)
- When we want to delete a directory name index from the b+ tree, we search it
  in the inserting rb-tree at first. If we look it up, just drop it. If not,
  add the key of it into the delayed deleting rb-tree.
  Similar to the delayed inserting rb-tree, we also check the number of the
  delayed items and do delayed items balance.
  (The same to inserting manipulation)
- When we want to update the metadata of some inode, we cached the data of the
  inode into the delayed node. the worker will flush it into the b+ tree after
  dealing with the delayed insertion and deletion.
- We will move the delayed node to the tail of the list after we access the
  delayed node, By this way, we can cache more delayed items and merge more
  inode updates.
- If we want to commit transaction, we will deal with all the delayed node.
- the delayed node will be freed when we free the btrfs inode.
- Before we log the inode items, we commit all the directory name index items
  and the delayed inode update.

I did a quick test by the benchmark tool[1] and found we can improve the
performance of file creation by ~15%, and file deletion by ~20%.

Before applying this patch:
Create files:
        Total files: 50000
        Total time: 1.096108
        Average time: 0.000022
Delete files:
        Total files: 50000
        Total time: 1.510403
        Average time: 0.000030

After applying this patch:
Create files:
        Total files: 50000
        Total time: 0.932899
        Average time: 0.000019
Delete files:
        Total files: 50000
        Total time: 1.215732
        Average time: 0.000024

[1] http://marc.info/?l=linux-btrfs&m=128212635122920&q=p3

Many thanks for Kitayama-san's help!
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Reviewed-by: NDavid Sterba <dave@jikos.cz>
Tested-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Tested-by: NItaru Kitayama <kitayama@cl.bb4u.ne.jp>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NDavid Sterba <dsterba@suse.cz>

setting the readonly flag prevents writes in case an error is detected
Signed-off-by: NArne Jansen <sensille@gmx.net>

adds ioctls necessary to start and cancel scrubs, to get current
progress and to get info about devices to be scrubbed.
Note that the scrub is done per-device and that the ioctl only
returns after the scrub for this devices is finished or has been
canceled.
Signed-off-by: NArne Jansen <sensille@gmx.net>

This adds an initial implementation for scrub. It works quite
straightforward. The usermode issues an ioctl for each device in the
fs. For each device, it enumerates the allocated device chunks. For
each chunk, the contained extents are enumerated and the data checksums
fetched. The extents are read sequentially and the checksums verified.
If an error occurs (checksum or EIO), a good copy is searched for. If
one is found, the bad copy will be rewritten.
All enumerations happen from the commit roots. During a transaction
commit, the scrubs get paused and afterwards continue from the new
roots.

This commit is based on the series originally posted to linux-btrfs
with some improvements that resulted from comments from David Sterba,
Ilya Dryomov and Jan Schmidt.
Signed-off-by: NArne Jansen <sensille@gmx.net>

Remove static and global declarations and/or definitions. Reduces size
of btrfs.ko by ~3.4kB.

  text    data     bss     dec     hex filename
402081    7464     200  409745   64091 btrfs.ko.base
398620    7144     200  405964   631cc btrfs.ko.remove-all
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

function prototypes without a body
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

parameter tree root it's not used since commit
5f39d397 ("Btrfs: Create extent_buffer
interface for large blocksizes")
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

reported by gcc -Wshadow:
page_index, page_offset, new_inode, dev_name
Signed-off-by: NDavid Sterba <dsterba@suse.cz>

These changes were incorrectly fixed by codespell. They were now
manually corrected.
Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>

This is similar to block group caching.

We dedicate a special inode in fs tree to save free ino cache.

At the very first time we create/delete a file after mount, the free ino
cache will be loaded from disk into memory. When the fs tree is commited,
the cache will be written back to disk.

To keep compatibility, we check the root generation against the generation
of the special inode when loading the cache, so the loading will fail
if the btrfs filesystem was mounted in an older kernel before.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>

Currently btrfs stores the highest objectid of the fs tree, and it always
returns (highest+1) inode number when we create a file, so inode numbers
won't be reclaimed when we delete files, so we'll run out of inode numbers
as we keep create/delete files in 32bits machines.

This fixes it, and it works similarly to how we cache free space in block
cgroups.

We start a kernel thread to read the file tree. By scanning inode items,
we know which chunks of inode numbers are free, and we cache them in
an rb-tree.

Because we are searching the commit root, we have to carefully handle the
cross-transaction case.

The rb-tree is a hybrid extent+bitmap tree, so if we have too many small
chunks of inode numbers, we'll use bitmaps. Initially we allow 16K ram
of extents, and a bitmap will be used if we exceed this threshold. The
extents threshold is adjusted in runtime.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>

So we can re-use the code to cache free inode numbers.

The change is quite straightforward. Two new structures are introduced.

- struct btrfs_free_space_ctl

  We move those variables that are used for caching free space from
  struct btrfs_block_group_cache to this new struct.

- struct btrfs_free_space_op

  We do block group specific work (e.g. calculation of extents threshold)
  through functions registered in this struct.

And then we can remove references to struct btrfs_block_group_cache.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>

Everytime we try to allocate disk space we try and see if we can pre-emptively
allocate a chunk, but in the common case we don't allocate anything, so there is
no sense in taking the chunk_mutex at all.  So instead if we are allocating a
chunk, mark it in the space_info so we don't get two people trying to allocate
at the same time.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
Reviewed-by: NLiu Bo <liubo2009@cn.fujitsu.com>

Currently we don't handle running out of space in the cache, so to fix this we
keep track of how far in the cache we are.  Then we only dirty the pages if we
successfully modify all of them, otherwise if we have an error or run out of
space we can just drop them and not worry about the vm writing them out.
Thanks,

Tested-by Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de>
Signed-off-by: NJosef Bacik <josef@redhat.com>

root_item->flags and root_item->byte_limit are not initialized when
a subvolume is created. This bug is not revealed until we added
readonly snapshot support - now you mount a btrfs filesystem and you
may find the subvolumes in it are readonly.

To work around this problem, we steal a bit from root_item->inode_item->flags,
and use it to indicate if those fields have been properly initialized.
When we read a tree root from disk, we check if the bit is set, and if
not we'll set the flag and initialize the two fields of the root item.
Reported-by: NAndreas Philipp <philipp.andreas@gmail.com>
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Tested-by: NAndreas Philipp <philipp.andreas@gmail.com>
cc: stable@kernel.org
Signed-off-by: NChris Mason <chris.mason@oracle.com>

btrfs will remove unused block groups after balance.
When a empty filesystem is balanced, the block group with tag "DATA" may be
dropped, and after umount and mount again, it will not find "DATA" space_info
and lead to OOPS.
So we initial the necessary space_infos(DATA, SYSTEM, METADATA) to avoid OOPS.
Reported-by: NDaniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

We take an free extent out from allocator, trim it, then put it back,
but before we trim the block group, we should make sure the block group is
cached, so plus a little change to make cache_block_group() run without a
transaction.
Signed-off-by: NLi Dongyang <lidongyang@novell.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Callers of btrfs_discard_extent() should check if we are mounted with -o discard,
as we want to make fitrim to work even the fs is not mounted with -o discard.
Also we should use REQ_DISCARD to map the free extent to get a full mapping,
last we only return errors if
1. the error is not a EOPNOTSUPP
2. no device supports discard
Signed-off-by: NLi Dongyang <lidongyang@novell.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Make the function public as we should update the reserved extents calculations
after taking out an extent for trimming.
Signed-off-by: NLi Dongyang <lidongyang@novell.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Data compression and data cow are controlled across the entire FS by mount
options right now.  ioctls are needed to set this on a per file or per
directory basis.  This has been proposed previously, but VFS developers
wanted us to use generic ioctls rather than btrfs-specific ones.

According to Chris's comment, there should be just one true compression
method(probably LZO) stored in the super.  However, before this, we would
wait for that one method is stable enough to be adopted into the super.
So I list it as a long term goal, and just store it in ram today.

After applying this patch, we can use the generic "FS_IOC_SETFLAGS" ioctl to
control file and directory's datacow and compression attribute.

NOTE:
 - The compression type is selected by such rules:
   If we mount btrfs with compress options, ie, zlib/lzo, the type is it.
   Otherwise, we'll use the default compress type (zlib today).

v1->v2:
- rebase to the latest btrfs.
v2->v3:
- fix a problem, i.e. when a file is set NOCOW via mount option, then this NOCOW
  will be screwed by inheritance from parent directory.
Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Tracepoints can provide insight into why btrfs hits bugs and be greatly
helpful for debugging, e.g
              dd-7822  [000]  2121.641088: btrfs_inode_request: root = 5(FS_TREE), gen = 4, ino = 256, blocks = 8, disk_i_size = 0, last_trans = 8, logged_trans = 0
              dd-7822  [000]  2121.641100: btrfs_inode_new: root = 5(FS_TREE), gen = 8, ino = 257, blocks = 0, disk_i_size = 0, last_trans = 0, logged_trans = 0
 btrfs-transacti-7804  [001]  2146.935420: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29368320 (orig_level = 0), cow_buf = 29388800 (cow_level = 0)
 btrfs-transacti-7804  [001]  2146.935473: btrfs_cow_block: root = 1(ROOT_TREE), refs = 2, orig_buf = 29364224 (orig_level = 0), cow_buf = 29392896 (cow_level = 0)
 btrfs-transacti-7804  [001]  2146.972221: btrfs_transaction_commit: root = 1(ROOT_TREE), gen = 8
   flush-btrfs-2-7821  [001]  2155.824210: btrfs_chunk_alloc: root = 3(CHUNK_TREE), offset = 1103101952, size = 1073741824, num_stripes = 1, sub_stripes = 0, type = DATA
   flush-btrfs-2-7821  [001]  2155.824241: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29388800 (orig_level = 0), cow_buf = 29396992 (cow_level = 0)
   flush-btrfs-2-7821  [001]  2155.824255: btrfs_cow_block: root = 4(DEV_TREE), refs = 2, orig_buf = 29372416 (orig_level = 0), cow_buf = 29401088 (cow_level = 0)
   flush-btrfs-2-7821  [000]  2155.824329: btrfs_cow_block: root = 3(CHUNK_TREE), refs = 2, orig_buf = 20971520 (orig_level = 0), cow_buf = 20975616 (cow_level = 0)
 btrfs-endio-wri-7800  [001]  2155.898019: btrfs_cow_block: root = 5(FS_TREE), refs = 2, orig_buf = 29384704 (orig_level = 0), cow_buf = 29405184 (cow_level = 0)
 btrfs-endio-wri-7800  [001]  2155.898043: btrfs_cow_block: root = 7(CSUM_TREE), refs = 2, orig_buf = 29376512 (orig_level = 0), cow_buf = 29409280 (cow_level = 0)

Here is what I have added:

1) ordere_extent:
        btrfs_ordered_extent_add
        btrfs_ordered_extent_remove
        btrfs_ordered_extent_start
        btrfs_ordered_extent_put

These provide critical information to understand how ordered_extents are
updated.

2) extent_map:
        btrfs_get_extent

extent_map is used in both read and write cases, and it is useful for tracking
how btrfs specific IO is running.

3) writepage:
        __extent_writepage
        btrfs_writepage_end_io_hook

Pages are cirtical resourses and produce a lot of corner cases during writeback,
so it is valuable to know how page is written to disk.

4) inode:
        btrfs_inode_new
        btrfs_inode_request
        btrfs_inode_evict

These can show where and when a inode is created, when a inode is evicted.

5) sync:
        btrfs_sync_file
        btrfs_sync_fs

These show sync arguments.

6) transaction:
        btrfs_transaction_commit

In transaction based filesystem, it will be useful to know the generation and
who does commit.

7) back reference and cow:
	btrfs_delayed_tree_ref
	btrfs_delayed_data_ref
	btrfs_delayed_ref_head
	btrfs_cow_block

Btrfs natively supports back references, these tracepoints are helpful on
understanding btrfs's COW mechanism.

8) chunk:
	btrfs_chunk_alloc
	btrfs_chunk_free

Chunk is a link between physical offset and logical offset, and stands for space
infomation in btrfs, and these are helpful on tracing space things.

9) reserved_extent:
	btrfs_reserved_extent_alloc
	btrfs_reserved_extent_free

These can show how btrfs uses its space.
Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This patch makes the free space cluster refilling code a little easier to
understand, and fixes some things with the bitmap part of it.  Currently we
either want to refill a cluster with

1) All normal extent entries (those without bitmaps)
2) A bitmap entry with enough space

The current code has this ugly jump around logic that will first try and fill up
the cluster with extent entries and then if it can't do that it will try and
find a bitmap to use.  So instead split this out into two functions, one that
tries to find only normal entries, and one that tries to find bitmaps.

This also fixes a suboptimal thing we would do with bitmaps.  If we used a
bitmap we would just tell the cluster that we were pointing at a bitmap and it
would do the tree search in the block group for that entry every time we tried
to make an allocation.  Instead of doing that now we just add it to the clusters
group.

I tested this with my ENOSPC tests and xfstests and it survived.
Signed-off-by: NJosef Bacik <josef@redhat.com>

We need to make sure the dir items we get are valid dir items.  So any time we
try and read one check it with verify_dir_item, which will do various sanity
checks to make sure it looks sane.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>