- 21 9月, 2009 1 次提交
-
-
由 Tim Abbott 提交于
This patch changes the remaining direct references to .bss.page_aligned in C and assembly code to use the macros in include/linux/linkage.h. Signed-off-by: NTim Abbott <tabbott@ksplice.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Acked-by: NPaul Mundt <lethal@linux-sh.org> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 01 9月, 2009 1 次提交
-
-
由 Paul Mundt 提交于
This implements support for NMI debugging that was shamelessly copied from the avr32 port. A bit of special magic is needed in the interrupt exception path given that the NMI exception handler is stubbed in to the regular exception handling table despite being reported in INTEVT. So we mangle the lookup and kick off an EXPEVT-style exception dispatch from the INTEVT path for exceptions that do_IRQ() has no chance of handling. As a result, we also drop the evt2irq() conversion from the do_IRQ() path and just do it in assembly. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 24 8月, 2009 1 次提交
-
-
由 Pawel Moll 提交于
This patch changes the way in which "multi-evt" interrups are handled. The intc_evt2irq_table and related intc_evt2irq() have been removed and the "redirecting" handler is installed for the coupled interrupts. Thanks to that the do_IRQ() function don't have to use another level of indirection for all the interrupts... Signed-off-by: NPawel Moll <pawel.moll@st.com> Signed-off-by: NStuart Menefy <stuart.menefy@st.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 17 8月, 2009 1 次提交
-
-
由 Paul Mundt 提交于
This moves the initialization over to an early_initcall(). This fixes up some lockdep interaction issues. At the same time, kill off some superfluous locking in the init path. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 14 8月, 2009 1 次提交
-
-
由 Matt Fleming 提交于
This is a first cut at a generic DWARF unwinder for the kernel. It's still lacking DWARF64 support and the DWARF expression support hasn't been tested very well but it is generating proper stacktraces on SH for WARN_ON() and NULL dereferences. Signed-off-by: NMatt Fleming <matt@console-pimps.org> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 11 7月, 2009 1 次提交
-
-
由 Paul Mundt 提交于
STACK_DEBUG ties in to mcount in order to do function-granular stack overflow checks as opposed to lazily checking from IRQ context. As the default is nohz, the frequency of overflow checking is too irregular to catch much useful information, and so the mcount approach employed by sparc64 is adopted instead. This kills off the old check entirely from the do_IRQ() path and now adopts CONFIG_MCOUNT instead. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 22 5月, 2009 2 次提交
-
-
由 Paul Mundt 提交于
This is just a simple arch_probe_nr_irqs() stub that wraps to the platform defined number of IRQs. This can be made gradually more intelligent based on what we can infer from the INTC tables and so on. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This converts a few places that were using the old irq_desc[] array over to the shiny new irq_to_desc() helper. Preperatory work for sparse irq support. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 27 2月, 2009 1 次提交
-
-
由 Magnus Damm 提交于
Instead of keeping the single vector -> single linux irq mapping we extend the intc code to support merging of vectors to a single linux irq. This helps processors such as sh7750, sh7780 and sh7785 which have more vectors than masking ability. With this patch in place we can modify the intc tables to use one irq per maskable irq source. Please note the following: - If multiple vectors share the same enum then only the first vector will be available as a linux irq. - Drivers may need to be rewritten to get pending irq source from the hardware block instead of irq number. This patch together with the sh7785 specific intc tables solves DMA controller irq issues related to buggy interrupt masking. Reported-by: NYoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 11 1月, 2009 1 次提交
-
-
由 Yinghai Lu 提交于
Impact: build fix Ingo Molnar wrote: > tip/arch/blackfin/kernel/irqchip.c: In function 'show_interrupts': > tip/arch/blackfin/kernel/irqchip.c:85: error: 'struct kernel_stat' has no member named 'irqs' > make[2]: *** [arch/blackfin/kernel/irqchip.o] Error 1 > make[2]: *** Waiting for unfinished jobs.... > So could move kstat_irqs array to irq_desc struct. (s390, m68k, sparc) are not touched yet, because they don't support genirq Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 29 7月, 2008 1 次提交
-
-
由 Paul Mundt 提交于
This follows the sparc changes a439fe51. Most of the moving about was done with Sam's directions at: http://marc.info/?l=linux-sh&m=121724823706062&w=2 with subsequent hacking and fixups entirely my fault. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 29 4月, 2008 1 次提交
-
-
由 Adrian Bunk 提交于
Add a proper prototype for __do_softirq() in include/linux/interrupt.h Signed-off-by: NAdrian Bunk <bunk@kernel.org> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 2月, 2008 1 次提交
-
-
由 Paul Mundt 提交于
Reported-by: NRobert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 07 11月, 2007 1 次提交
-
-
由 Paul Mundt 提交于
Caught by the surprisingly not-entirely-useless 'includecheck'. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 02 11月, 2007 1 次提交
-
-
由 Paul Mundt 提交于
While using separate IRQ stacks can cut down on stack consumption, many users can also use 4k stacks directly without the additional need of separate stacks for soft and hardirqs. With this split, we support the same rationale for 4KSTACKS as m68knommu, with the IRQSTACKS abstraction as per ppc64. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 11 10月, 2007 1 次提交
-
-
由 Robert Olsson 提交于
As noted by Christoph Hellwig, pktgen was the only user so it can now be removed. [ Add missing cases caught by Adrian Bunk. -DaveM ] Signed-off-by: NRobert Olsson <robert.olsson@its.uu.se> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 7月, 2007 1 次提交
-
-
由 Magnus Damm 提交于
This patch unifies the cpu specific interrupt setup functions for interrupt controller blocks such as ipr, intc2 and intc. There is no point in having separate functions for each interrupt controller, so let's clean this up. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 12 7月, 2007 1 次提交
-
-
由 Robert P. J. Day 提交于
Use the newly added .bss.page_aligned section for aligning the stacks rather than THREAD_SIZE. Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 07 5月, 2007 1 次提交
-
-
由 Paul Mundt 提交于
Each board sets the total number of IRQs that it's interested in via the machvec. Previously we cared about the off vs on-chip IRQ range, but any code relying on that is long dead. Set NR_IRQS to something sensible given the vector range, and allow boards to cap it if they really care. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 14 3月, 2007 1 次提交
-
-
由 Paul Mundt 提交于
SH-3 and SH-4 were trampling the register, and SH-2 wasn't even setting it in the first place. This ended up with some rather broken behaviour in the sysrq show_regs(). Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 06 12月, 2006 3 次提交
-
-
由 Jamie Lenehan 提交于
The following moves the creation of IPR interupts into setup-7750.c and updates a few other things to make it all work after the "Drop CPU subtype IRQ headers" commit. It boots and runs fine on my titan board. - adds an ipr_idx to the ipr_data and uses a function in the subtype code to calculate the address of the IPR registers - adds a function to enable individual interrupt mode for externals in the subtype code and calls that from the titan board code instead of doing it directly. - I changed the shift in the ipr_data to be the actual # of bits to shift, instead of the numnber / 4 - made it easier to match with the manual. Signed-off-by: NJamie Lenehan <lenehan@twibble.org> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
There was a clobber issue with the register we were saving the stack in, so we switch to a register that we handle in the clobber list properly already. This also follows the x86 changes for allowing the softirq checks from hardirq context. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Stuart Menefy 提交于
This fixes up the kernel for gcc4. The existing exception handlers needed some wrapping for pt_regs access, acessing the registers via a RELOC_HIDE() pointer. The strcpy() issues popped up here too, so add -ffreestanding and kill off the symbol export. Signed-off-by: NStuart Menefy <stuart.menefy@st.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 19 10月, 2006 1 次提交
-
-
由 Paul Mundt 提交于
handle_irq_name() and set_irq_chip_and_handler() disappeared, update for desc->name and set_irq_chip_and_handler_name() use. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 12 10月, 2006 1 次提交
-
-
由 Paul Mundt 提交于
Kill off interrupt_table for all of the CPU subtypes, we now default in to stepping in to do_IRQ() for _all_ IRQ exceptions and counting the spurious ones, rather than simply flipping on the ones we cared about. This and enabling the IRQ by default automatically has already uncovered a couple of bugs and IRQs that weren't being caught, as well as some that are being generated far too often (SCI Tx Data Empty, for example). The general rationale is to use a marker for interrupt exceptions, test for it in the handle_exception() path, and skip out to do_IRQ() if it's found. Everything else follows the same behaviour of finding the cached EXPEVT value in r2/r2_bank, we just rip out the INTEVT read from entry.S entirely (except for in the kGDB NMI case, which is another matter). Note that while this changes the do_IRQ() semantics regarding r4 handling, they were fundamentally broken anyways (relying entirely on r2_bank for the cached code). With this, we do the INTEVT read from do_IRQ() itself (in the CONFIG_CPU_HAS_INTEVT case), or fall back on r4 for the muxed IRQ number, which should also be closer to what SH-2 and SH-2A want anyways. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 06 10月, 2006 1 次提交
-
-
由 Paul Mundt 提交于
Trivial fixes for build breakage introduced by IRQ handler changes. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 27 9月, 2006 2 次提交
-
-
由 Paul Mundt 提交于
This enables support for 4K stacks on SH. Currently this depends on DEBUG_KERNEL, but likely all boards will switch to this as the default in the future. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This adds a DEBUG_STACK_USAGE and DEBUG_STACKOVERFLOW for SH. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 30 6月, 2006 1 次提交
-
-
由 Ingo Molnar 提交于
This patch-queue improves the generic IRQ layer to be truly generic, by adding various abstractions and features to it, without impacting existing functionality. While the queue can be best described as "fix and improve everything in the generic IRQ layer that we could think of", and thus it consists of many smaller features and lots of cleanups, the one feature that stands out most is the new 'irq chip' abstraction. The irq-chip abstraction is about describing and coding and IRQ controller driver by mapping its raw hardware capabilities [and quirks, if needed] in a straightforward way, without having to think about "IRQ flow" (level/edge/etc.) type of details. This stands in contrast with the current 'irq-type' model of genirq architectures, which 'mixes' raw hardware capabilities with 'flow' details. The patchset supports both types of irq controller designs at once, and converts i386 and x86_64 to the new irq-chip design. As a bonus side-effect of the irq-chip approach, chained interrupt controllers (master/slave PIC constructs, etc.) are now supported by design as well. The end result of this patchset intends to be simpler architecture-level code and more consolidation between architectures. We reused many bits of code and many concepts from Russell King's ARM IRQ layer, the merging of which was one of the motivations for this patchset. This patch: rename desc->handler to desc->chip. Originally i did not want to do this, because it's a big patch. But having both "desc->handler", "desc->handle_irq" and "action->handler" caused a large degree of confusion and made the code appear alot less clean than it truly is. I have also attempted a dual approach as well by introducing a desc->chip alias - but that just wasnt robust enough and broke frequently. So lets get over with this quickly. The conversion was done automatically via scripts and converts all the code in the kernel. This renaming patch is the first one amongst the patches, so that the remaining patches can stay flexible and can be merged and split up without having some big monolithic patch act as a merge barrier. [akpm@osdl.org: build fix] [akpm@osdl.org: another build fix] Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 23 3月, 2006 1 次提交
-
-
由 Andrew Morton 提交于
When we stop allocating percpu memory for not-possible CPUs we must not touch the percpu data for not-possible CPUs at all. The correct way of doing this is to test cpu_possible() or to use for_each_cpu(). This patch is a kernel-wide sweep of all instances of NR_CPUS. I found very few instances of this bug, if any. But the patch converts lots of open-coded test to use the preferred helper macros. Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Acked-by: NKyle McMartin <kyle@parisc-linux.org> Cc: Anton Blanchard <anton@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: Andi Kleen <ak@muc.de> Cc: Christian Zankel <chris@zankel.net> Cc: Philippe Elie <phil.el@wanadoo.fr> Cc: Nathan Scott <nathans@sgi.com> Cc: Jens Axboe <axboe@suse.de> Cc: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 1月, 2006 1 次提交
-
-
由 Paul Mundt 提交于
This moves the various IRQ controller drivers into a new subdirectory, and also extends the INTC2 IRQ handler to also deal with SH7760 and SH7780 interrupts, rather than just ST-40. The old CONFIG_SH_GENERIC has also been removed from the IRQ definitions, as new ports are expected to be based off of CONFIG_SH_UNKNOWN. Since there are plenty of incompatible machvecs, CONFIG_SH_GENERIC doesn't make sense anymore. Signed-off-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-