Try to allocate huge pages when it makes sense.

v2: avoid compound pages for now
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We need to figure out first how to correctly map them into the CPU page tables.

bug: https://bugs.freedesktop.org/show_bug.cgi?id=103138Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Old value from bringup was wrong.

Cc: stable@vger.kernel.org
Signed-off-by: NKen Wang <Ken.Wang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

SR-IOV need to exchange some data between PF&VF through shared VRAM

PF will copy some necessary firmware and information to the shared
VRAM. It also requires some information from VF. PF will send a
key through mailbox2 to help guest calculate checksum so that it can
verify whether the data is correct.

So check the data on the specified offset of the shared VRAM, if the
checksum is right, read values from it and write some VF information
next to the data from PF.
Signed-off-by: NHorace Chen <horace.chen@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Helps avoiding deadlock during GPU reset.
Added mutex to amdgpu_ctx to preserve order of fences on a ring.

v2:
Put waiting logic in a function in a seperate function in amdgpu_ctx.c
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This enables old fence waiting before reservation lock is aquired
which in turn is part of a bigger solution to deadlock happening
when gpu reset with VRAM recovery accures during intensive rendering.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The function uvd_v6_0_enc_get_destroy_msg is local to the source and
does not need to be in global scope, so make it static.

Cleans up sparse warning:
symbol 'uvd_v6_0_enc_get_destroy_msg' was not declared. Should it be
static?
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

move functions in polaris_smc.c to
polaris10_smumgr.c and make all functions in
polaris10_smumgr.c static.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

move functions in tonga_smc.c to tonga_smumgr.c
and make all functions in tonga_smumgr.c static.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

move functions in iceland_smc.c to iceland_smumgr.c
and make all functions in iceland_smumgr.c static.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

make all functions in fiji_smumgr.c static and
exported by pp_smumgr_func table.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

for consistency.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

in function amdgpu_ucode_init_bo, when failed, it will
set load_type to AMDGPU_FW_LOAD_DIRECT.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

fiji and polaris can share same setup_pwr_virus
function.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Used for smu power logging.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Used for smu power logging.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

used for notify SMU the allocated buffer address.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

New messages for smu power logging.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Setting the function pointer to the get the temperature on CZ.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSatyajit Sahu <satyajit.sahu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Don't leak implementation details about how each priority behaves to
usermode. This allows greater flexibility in the future.

Squash into c2636dc5Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The AMDGPU_SCHED_OP_PROCESS_PRIORITY_OVERRIDE ioctls are used to set
the priority of a different process in the current system.

When a request is dropped, the process's contexts will be
restored to the priority specified at context creation time.

A request can be dropped by setting the override priority to
AMDGPU_CTX_PRIORITY_UNSET.

An fd is used to identify the remote process. This is simpler than
passing a pid number, which is vulnerable to re-use, etc.

This functionality is limited to DRM_MASTER since abuse of this
interface can have a negative impact on the system's performance.

v2: removed unused output structure
v3: change refcounted interface for a regular set operation
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Introduce amdgpu_ctx_priority_override(). A mechanism to override a
context's priority.

An override can be terminated by setting the override to
AMD_SCHED_PRIORITY_UNSET.

v2: change refcounted interface for a direct set
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use _INVALID to identify bad parameters and _UNSET to represent the
lack of interest in a specific value.
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is useful for changing an entity's priority at runtime.

v2: don't modify the order of amd_sched_entity members
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Returning invalid priorities as _NORMAL is a backwards compatibility
quirk of amdgpu_ctx_ioctl(). Move this detail one layer up where it
belongs.
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Programming CP_HQD_QUEUE_PRIORITY enables a queue to take priority over
other queues on the same pipe. Multiple queues on a pipe are timesliced
so this gives us full precedence over other queues.

Programming CP_HQD_PIPE_PRIORITY changes the SPI_ARB_PRIORITY of the
wave as follows:
        0x2: CS_H
        0x1: CS_M
        0x0: CS_L

The SPI block will then dispatch work according to the policy set by
SPI_ARB_PRIORITY. In the current policy CS_H is higher priority than
gfx.

In order to prevent getting stuck in loops of resources bouncing between
GFX and high priority compute and introducing further latency, we
statically reserve a portion of the pipe.

v2: fix srbm_select to ring->queue and use ring->funcs->type
v3: use AMD_SCHED_PRIORITY_* instead of AMDGPU_CTX_PRIORITY_*
v4: switch int to enum amd_sched_priority
v5: corresponding changes for srbm_lock
v6: change CU reservation to PIPE_PERCENT allocation
v7: use kiq instead of MMIO
v8: back to MMIO, and make the implementation sleep safe.
v9: corresponding changes for splitting HIGH into _HW/_SW
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add an initial framework for changing the HW priorities of rings. The
framework allows requesting priority changes for the lifetime of an
amdgpu_job. After the job completes the priority will decay to the next
lowest priority for which a request is still valid.

A new ring function set_priority() can now be populated to take care of
the HW specific programming sequence for priority changes.

v2: set priority before emitting IB, and take a ref on amdgpu_job
v3: use AMD_SCHED_PRIORITY_* instead of AMDGPU_CTX_PRIORITY_*
v4: plug amdgpu_ring_restore_priority_cb into amdgpu_job_free_cb
v5: use atomic for tracking job priorities instead of last_job
v6: rename amdgpu_ring_priority_[get/put]() and align parameters
v7: replace spinlocks with mutexes for KIQ compatibility
v8: raise ring priority during cs_ioctl, instead of job_run
v9: priority_get() before push_job()
Reviewed-by: NChristian König <christian.koenig@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add a new context creation parameter to express a global context priority.

The priority ranking in descending order is as follows:
 * AMDGPU_CTX_PRIORITY_HIGH_HW
 * AMDGPU_CTX_PRIORITY_HIGH_SW
 * AMDGPU_CTX_PRIORITY_NORMAL
 * AMDGPU_CTX_PRIORITY_LOW_SW
 * AMDGPU_CTX_PRIORITY_LOW_HW

The driver will attempt to schedule work to the hardware according to
the priorities. No latency or throughput guarantees are provided by
this patch.

This interface intends to service the EGL_IMG_context_priority
extension, and vulkan equivalents.

Setting a priority above NORMAL requires CAP_SYS_NICE or DRM_MASTER.

v2: Instead of using flags, repurpose __pad
v3: Swap enum values of _NORMAL _HIGH for backwards compatibility
v4: Validate usermode priority and store it
v5: Move priority validation into amdgpu_ctx_ioctl(), headline reword
v6: add UAPI note regarding priorities requiring CAP_SYS_ADMIN
v7: remove ctx->priority
v8: added AMDGPU_CTX_PRIORITY_LOW, s/CAP_SYS_ADMIN/CAP_SYS_NICE
v9: change the priority parameter to __s32
v10: split priorities into _SW and _HW
v11: Allow DRM_MASTER without CAP_SYS_NICE
Reviewed-by: NEmil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Introduce a flag to signal that access to a BO will be synchronized
through an external mechanism.

Currently all buffers shared between contexts are subject to implicit
synchronization. However, this is only required for protocols that
currently don't support an explicit synchronization mechanism (DRI2/3).

This patch introduces the AMDGPU_GEM_CREATE_EXPLICIT_SYNC, so that
users can specify when it is safe to disable implicit sync.

v2: only disable explicit sync in amdgpu_cs_ioctl
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Convert GTT mappings into linear ones for huge page handling.

v2: use fragment size as minimum for linear conversion
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Instead of mapping them bit by bit map/unmap all consecutive
pages as in one call.

v2: test for consecutive pages instead of using compound page order.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Totally surprisingly this is more efficient than doing it page by page.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

SR-IOV need to reserve a piece of shared VRAM at the exact place
to exchange data betweem PF and VF. The start address and size of
the shared mem are passed to guest through VBIOS structure
VRAM_UsageByFirmware.

VRAM_UsageByFirmware is a general feature in VBIOS, it indicates
that VBIOS need to reserve a piece of memory on the VRAM.

Because the mem address is specified. Reserve it early in
amdgpu_ttm_init to make sure that it can monoplize the space.
Signed-off-by: NHorace Chen <horace.chen@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Without the additional bits set in PDEs/PTEs, the ATC memory access
would have failed on Raven.
Signed-off-by: NYong Zhao <yong.zhao@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

More new stuff for 4.15. Highlights:
- Add clock query interface for raven
- Add new FENCE_TO_HANDLE ioctl
- UVD video encode ring support on polaris
- transparent huge page DMA support
- deadlock fixes
- compute pipe lru tweaks
- powerplay cleanups and regression fixes
- fix duplicate symbol issue with radeon and amdgpu
- misc bug fixes

* 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux: (72 commits)
  drm/radeon/dp: make radeon_dp_get_dp_link_config static
  drm/radeon: move ci_send_msg_to_smc to where it's used
  drm/amd/sched: fix deadlock caused by unsignaled fences of deleted jobs
  drm/amd/sched: NULL out the s_fence field after run_job
  drm/amd/sched: move adding finish callback to amd_sched_job_begin
  drm/amd/sched: fix an outdated comment
  drm/amd/sched: rename amd_sched_entity_pop_job
  drm/amdgpu: minor coding style fix
  drm/ttm: add transparent huge page support for DMA allocations v2
  drm/ttm: add support for different pool sizes
  drm/ttm: remove unsued options from ttm_mem_global_alloc_page
  drm/amdgpu: add uvd enc irq
  drm/amdgpu: add uvd enc ib test
  drm/amdgpu: add uvd enc ring test
  drm/amdgpu: add uvd enc vm functions (v2)
  drm/amdgpu: add uvd enc into run queue
  drm/amdgpu: add uvd enc rings
  drm/amdgpu: add new uvd enc ring methods
  drm/amdgpu: add uvd enc command in header
  drm/amdgpu: add uvd enc registers in header
  ...

It's not used outside this file any longer.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It's used in ci_dpm.c so move it there and make it static.
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Highly concurrent Piglit runs can trigger a race condition where a pending
SDMA job on a buffer object is never executed because the corresponding
process is killed (perhaps due to a crash). Since the job's fences were
never signaled, the buffer object was effectively leaked. Worse, the
buffer was stuck wherever it happened to be at the time, possibly in VRAM.

The symptom was user space processes stuck in interruptible waits with
kernel stacks like:

    [<ffffffffbc5e6722>] dma_fence_default_wait+0x112/0x250
    [<ffffffffbc5e6399>] dma_fence_wait_timeout+0x39/0xf0
    [<ffffffffbc5e82d2>] reservation_object_wait_timeout_rcu+0x1c2/0x300
    [<ffffffffc03ce56f>] ttm_bo_cleanup_refs_and_unlock+0xff/0x1a0 [ttm]
    [<ffffffffc03cf1ea>] ttm_mem_evict_first+0xba/0x1a0 [ttm]
    [<ffffffffc03cf611>] ttm_bo_mem_space+0x341/0x4c0 [ttm]
    [<ffffffffc03cfc54>] ttm_bo_validate+0xd4/0x150 [ttm]
    [<ffffffffc03cffbd>] ttm_bo_init_reserved+0x2ed/0x420 [ttm]
    [<ffffffffc042f523>] amdgpu_bo_create_restricted+0x1f3/0x470 [amdgpu]
    [<ffffffffc042f9fa>] amdgpu_bo_create+0xda/0x220 [amdgpu]
    [<ffffffffc04349ea>] amdgpu_gem_object_create+0xaa/0x140 [amdgpu]
    [<ffffffffc0434f97>] amdgpu_gem_create_ioctl+0x97/0x120 [amdgpu]
    [<ffffffffc037ddba>] drm_ioctl+0x1fa/0x480 [drm]
    [<ffffffffc041904f>] amdgpu_drm_ioctl+0x4f/0x90 [amdgpu]
    [<ffffffffbc23db33>] do_vfs_ioctl+0xa3/0x5f0
    [<ffffffffbc23e0f9>] SyS_ioctl+0x79/0x90
    [<ffffffffbc864ffb>] entry_SYSCALL_64_fastpath+0x1e/0xad
    [<ffffffffffffffff>] 0xffffffffffffffff

Note: The correctness of this change depends on the earlier commit
"drm/amd/sched: move adding finish callback to amd_sched_job_begin"

v2: set an error on the finished fence
Signed-off-by: NNicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAndres Rodriguez <andresx7@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>