- 25 5月, 2011 2 次提交
-
-
由 Andrew Morton 提交于
alpha allmodconfig: drivers/tty/serial/pch_uart.c: In function 'dma_handle_tx': drivers/tty/serial/pch_uart.c:873: error: implicit declaration of function 'kzalloc' drivers/tty/serial/pch_uart.c:873: warning: assignment makes pointer from integer without a cast drivers/tty/serial/pch_uart.c: In function 'pch_uart_init_port': drivers/tty/serial/pch_uart.c:1403: warning: assignment makes pointer from integer without a cast Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Rientjes 提交于
Architectures that implement their own show_mem() function did not pass the filter argument to show_free_areas() to appropriately avoid emitting the state of nodes that are disallowed in the current context. This patch now passes the filter argument to show_free_areas() so those nodes are now avoided. This patch also removes the show_free_areas() wrapper around __show_free_areas() and converts existing callers to pass an empty filter. ia64 emits additional information for each node, so skip_free_areas_zone() must be made global to filter disallowed nodes and it is converted to use a nid argument rather than a zone for this use case. Signed-off-by: NDavid Rientjes <rientjes@google.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Helge Deller <deller@gmx.de> Cc: James Bottomley <jejb@parisc-linux.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 5月, 2011 3 次提交
-
-
由 Magnus Damm 提交于
Fix sh7377 and sh73a0 build failure: drivers/tty/serial/sh-sci.c: In function 'scif_txfill': drivers/tty/serial/sh-sci.c:338: error: implicit declaration of function 'sci_SCTFDR_in' drivers/tty/serial/sh-sci.c: In function 'scif_rxfill': drivers/tty/serial/sh-sci.c:351: error: implicit declaration of function 'sci_SCRFDR_in' make[3]: *** [drivers/tty/serial/sh-sci.o] Error 1 make[2]: *** [drivers/tty/serial] Error 2 make[1]: *** [drivers/tty] Error 2 make: *** [drivers] Error 2 Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch adds wakeup support to the sh-sci driver. The serial core deals with all details but defaults to wakeup disabled. So to make use of this feature enable wakeup in sysfs: echo enabled > /sys/class/tty/ttySC0/power/wakeup Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Add support for Runtime PM in the sh-sci driver. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 20 5月, 2011 3 次提交
-
-
由 Antony Pavlov 提交于
This patch adds support for the Omega-PCI, an 8-port asynchronous multiport adapter for computers with PCI bus [1]. [1] http://www.cronyx.ru/hardware/ompci.htmlSigned-off-by: NAntony Pavlov <antony@niisi.msk.ru> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Stephen Warren 提交于
When a break is received, Tegra's UART apparently fills the FIFO with 0 bytes. These must be drained so that they aren't interpreted as actual data received. This allows e.g. MAGIC_SYSRQ to work on Tegra's UARTs. v2: Added FIXME comment to clear_rx_fifo Originally-by: NLaxman Dewangan <ldewangan@nvidia.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Stephen Warren 提交于
Tegra's UART is currently auto-detected as PORT_XSCALE due to register bit UART_IER.UUE being writable. However, the Tegra documentation states that this register bit is reserved. Hence, we should not program it. Instead, the documentation specifies that the UART is 16550 compatible. However, Tegra does need register bit UART_IER.RTOIE set, which is not enabled by any 16550 port type. This was not noticed before, since PORT_XSCALE enables CAP_UUE, which conflates both UUE and RTOIE bit programming. This change defines PORT_TEGRA that doesn't set UART_CAP_UUE, but does set UART_CAP_RTOIE, which is a new capability indicating that the RTOIE bit needs to be enabled. Based-on-code-by: NLaxman Dewangan <ldewangan@nvidia.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 19 5月, 2011 2 次提交
-
-
由 John Crispin 提交于
Signed-off-by: NJohn Crispin <blogic@openwrt.org> Signed-off-by: NRalph Hempel <ralph.hempel@lantiq.com> Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Cc: alan@lxorguk.ukuu.org.uk Cc: linux-mips@linux-mips.org Cc: linux-serial@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2269/Acked-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Grant Likely 提交于
Commit b826291c, "drivercore/dt: add a match table pointer to struct device" added an of_match pointer to struct device to cache the of_match_table entry discovered at driver match time. This was unsafe because matching is not an atomic operation with probing a driver. If two or more drivers are attempted to be matched to a driver at the same time, then the cached matching entry pointer could get overwritten. This patch reverts the of_match cache pointer and reworks all users to call of_match_device() directly instead. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 13 5月, 2011 1 次提交
-
-
由 Kukjin Kim 提交于
According to removing ARCH_S5P6442, we don't need to support serial for S5P6442. Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NKukjin Kim <kgene.kim@samsung.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 12 5月, 2011 1 次提交
-
-
由 Scott Kilau 提交于
Add support to the 8250 PCI serial driver for the Digi/IBM PCIe 2-port Async EIA-232 Adapter. Oxford Semiconductor produces a 2/4/8 port UART (OXPCIe952/OXPCIe954/OXPCIe958) chip called the Tornado, that can be used to create a very simple serial board product. The kernel sources currently have just 2 vendors using this chip, which is Oxford and Mainpipe. This new Digi/IBM serial product now uses it as well. Rather than create a long running comment of vendors using the chip, the one changed comment in the patch below now just lists "For Oxford Semiconductor Tornado based devices" to be a more generic comment for all vendors that end up using the Oxford Tornado chip. Cc: Michael Reed <mreed10@us.ibm.com> Signed-off-by: NScott Kilau <scottk@digi.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 11 5月, 2011 1 次提交
-
-
由 Tomoya MORINAGA 提交于
Support new device OKI SEMICONDUCTOR ML7223 IOH(Input/Output Hub). The ML7223 IOH is for MP(Media Phone) use. The ML7223 is companion chip for Intel Atom E6xx series. The ML7223 is completely compatible for Intel EG20T PCH. Signed-off-by: NTomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Acked-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 06 5月, 2011 1 次提交
-
-
由 Joe Perches 提交于
Saves about 50KB of data. Old/new size of all objects: text data bss dec hex filename 563015 80096 130684 773795 bcea3 (TOTALS) 610916 32256 130632 773804 bceac (TOTALS) Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> (for drivers/net/can/softing/softing_cs.c) Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 04 5月, 2011 1 次提交
-
-
由 John Linn 提交于
The Xilinx PS Uart is used on the new ARM based SoC. This UART is not compatible with others such that a seperate driver is required. Signed-off-by: NJohn Linn <john.linn@xilinx.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 26 4月, 2011 3 次提交
-
-
由 Joe Perches 提交于
Using C line continuation inside format strings is error prone. Clean up the unintended whitespace introduced by misuse of \. Neaten correctly used line continations as well for consistency. drivers/scsi/arcmsr/arcmsr_hba.c has these errors as well, but arcmsr needs a lot more work and the driver should likely be moved to staging instead. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
msleep* is guaranteed to return with TASK_RUNNING task state. And since there is no other set_task_state in the paths of uart_wait_until_sent, we need not to set_task_state to TASK_RUNNING. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jiri Slaby 提交于
tty->index (named here as line) is set up in initialize_tty_struct. The value is checked in get_tty_driver for the found driver as: if (device < base || device >= base + p->num) continue; *index = device - base; So index/line can never be more than driver->num. Hence remove this test from uart_open. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 20 4月, 2011 9 次提交
-
-
由 Uwe Kleine-König 提交于
If cts changes between reading the level at the cts input (USR1_RTSS) and acking the irq (USR1_RTSD) the last edge doesn't generate an irq and uart_handle_cts_change is called with a outdated value for cts. The race was introduced by commit ceca629e ([ARM] 2971/1: i.MX uart handle rts irq) Reported-by: NArwed Springer <Arwed.Springer@de.trumpf.com> Tested-by: NArwed Springer <Arwed.Springer@de.trumpf.com> Cc: stable@kernel.org # 2.6.14+ Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Govindraj.R 提交于
Remove stale code in serial_core layer. Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NGovindraj.R <govindraj.raja@ti.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jesper Juhl 提交于
Including linux/tty.h 3 times is a little over the top - once will do. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jovi Zhang 提交于
remove invalid location line in each file header after location moved from driver/char to driver/tty Signed-off-by: NJovi Zhang <bookjovi@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jiri Slaby 提交于
Now, uart_update_termios is empty, so it's time to remove it. We no longer need a live tty in .dtr_rts. So this should prune all the bugs where tty is zeroed in port->tty during tty_port_block_til_ready. There is one thing to note. We don't set ASYNC_NORMAL_ACTIVE now. It's because this is done already in tty_port_block_til_ready. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jiri Slaby 提交于
In .dtr_rts we do: uart_set_mctrl(uport, TIOCM_DTR | TIOCM_RTS) and call uart_update_termios. It does: uart_set_mctrl(port, TIOCM_DTR | TIOCM_RTS) once again. As the only callsite of uart_update_termios is .dtr_rts, remove the uart_set_mctrl from uart_update_termios to not set it twice. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jiri Slaby 提交于
We should not fiddle with speed and cflags in .dtr_rts hook. Actually we might not have tty at that moment already. So move the console cflag copy and speed setup into uart_startup. Actually the speed setup is already there, but we need to call it unconditionally (uart_startup is called from uart_open with hw_init = 0). This means we move uart_change_speed before dtr/rts setup in .dtr_rts. But this should not matter as the setup should be called after uart_change_speed anyway. Before: After: dtr/rts setup (dtr_rts) uart_change_speed (startup) uart_change_speed (update_termios) dtr/rts setup (dtr_rts) dtr/rts setup (update_termios) dtr/rts setup (update_termios) The second setup will dismiss with the next patch. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Tobias Klauser 提交于
Devices extracted from device tree all seem to have pdev->id set to -1. Up until now we mapped all devices with id -1 to the first device. This behaviour could lead to problems when using more than one Altera UART in a system. This patch changes the behaviour of the driver to scan for the next free id in case the id is -1. Because we cannot refer back to the assigned id in altera_uart_remove, the port instance needs to be stored in device drvdata. Reported-by: NDavid Smoot <davidsmoot@gmail.com> Cc: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jiri Slaby 提交于
drivers/tty/serial/serial_core.c:1980:2: warning: Value stored to 'tty' is never read tty = port->tty; ^ ~~~~~~~~~ Signed-off-by: NJiri Slaby <jslaby@suse.cz> Acked-by: NGovindraj.R <govindraj.raja@ti.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 10 4月, 2011 1 次提交
-
-
由 Justin P. Mattock 提交于
Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 31 3月, 2011 4 次提交
-
-
由 Lucas De Marchi 提交于
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>
-
由 Nobuhiro Iwamatsu 提交于
The driver is initialized in a state with an unknown value by serial_console_setup. And initialization fails. This is caused by the initialization by sci_console_init. This function does not seem to be necessary for the present sh-sci driver. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Alexandre Courbot 提交于
Commit 906b17dc introduced a condition where the kernel will crash unless a earlyprintk parameter is specified. Without this parameter, sci_console_init is called during early console setup without any port being initialized, and the kernel crashes a little bit later when uart_set_options attemps to invoke set_termios on a port with an ops member equal to NULL. This patch just checks in sci_console_init that the port is properly initialized, and aborts the early console setup if it is not. Signed-off-by: NAlexandre Courbot <gnurou@gmail.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 David S. Miller 提交于
It absolutely needs to be able to get at pdev_archdata members which are sparc specific. Signed-off-by: NDavid S. Miller <davem@davemloft.net> Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
-
- 30 3月, 2011 2 次提交
-
-
由 Daniel Hellstrom 提交于
The UARTs may be located on different APB buses, thus have different UART clock frequency. The system frequency is not the same (but often) as the UART frequency, rather the APB bus frequency that the APBUART is located at has the same frequency, so this looks at the "freq" property instead. Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Hellstrom 提交于
See Commit id 1636f8ac (sparc/of: Move of_device fields into struct pdev_archdata), this patch is similar to 19e4875f (of/sparc: fix build regression from of_device changes) Signed-off-by: NDaniel Hellstrom <daniel@gaisler.com> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 3月, 2011 1 次提交
-
-
由 Thomas Gleixner 提交于
Scripted with coccinelle. Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 26 3月, 2011 1 次提交
-
-
由 Dan Carpenter 提交于
This is an off by one because strlen() doesn't count the null terminator. We strcpy() these strings into an array of size MAX_CONFIG_LEN. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
- 16 3月, 2011 1 次提交
-
-
由 Julia Lawall 提交于
Add a call to of_node_put in the error handling code following a call to of_find_compatible_node or of_find_node_by_type. This patch also substantially reorganizes the error handling code in the function, to that it is possible first to jump to code that frees qe_port and then to jump to code that also puts np. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ local idexpression x; expression E,E1,E2; statement S; @@ *x = (of_find_node_by_path |of_find_node_by_name |of_find_node_by_phandle |of_get_parent |of_get_next_parent |of_get_next_child |of_find_compatible_node |of_match_node |of_find_node_by_type |of_find_node_with_property |of_find_matching_node |of_parse_phandle )(...); ... if (x == NULL) S <... when != x = E *if (...) { ... when != of_node_put(x) when != if (...) { ... of_node_put(x); ... } ( return <+...x...+>; | * return ...; ) } ...> ( E2 = x; | of_node_put(x); ) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Acked-by: NTimur Tabi <timur@freescale.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 15 3月, 2011 1 次提交
-
-
由 Denis Turischev 提交于
Default clock source for UARTs on Topcliff is external UART_CLK. On CM-iTC USB_48MHz is used instead. After VCO2PLL and DIV manipulations UARTs will receive 192 MHz. Clock manipulations on Topcliff are controlled in pch_phub.c v2: redone against the linux-next tree v3: redone against linux/kernel/git/next/linux-next.git snapshot Signed-off-by: NDenis Turischev <denis@compulab.co.il> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 10 3月, 2011 2 次提交
-
-
由 Linus Walleij 提交于
This piece of code was just slightly different between the DMA and IRQ paths, in DMA mode we surely shouldn't read more than 256 character either, so factor this out in its own function and use for both DMA and PIO mode. Tested on Ux500 and U300. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Linus Walleij 提交于
This adds an optional RX DMA codepath for the devices that support this by using the apropriate burst sizes instead of pulling single bytes. Includes portions of code written by Russell King during a PL08x hacking session. This has been tested on U300 and Ux500. Tested-by: NJerzy Kasenberg <jerzy.kasenberg@tieto.com> Tested-by: NGrzegorz Sygieda <grzegorz.sygieda@tieto.com> Tested-by: NMarcin Mielczarczyk <marcin.mielczarczyk@tieto.com> Signed-off-by: NPer Forlin <per.friden@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-