If list_for_each_entry, etc complete a traversal of the list, the iterator
variable ends up pointing to an address at an offset from the list head,
and not a meaningful structure.  Thus this value should not be used after
the end of the iterator.  There does not seem to be a meaningful value to
provide to netdev_warn.  Replace with pr_warn, since pr_err is used
elsewhere.

This problem was found using Coccinelle (http://coccinelle.lip6.fr/).
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If list_for_each_entry, etc complete a traversal of the list, the iterator
variable ends up pointing to an address at an offset from the list head,
and not a meaningful structure.  Thus this value should not be used after
the end of the iterator.  This seems to be a copy-paste bug from a previous
debugging message, and so the meaningless value is just deleted.

This problem was found using Coccinelle (http://coccinelle.lip6.fr/).
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If list_for_each_entry, etc complete a traversal of the list, the iterator
variable ends up pointing to an address at an offset from the list head,
and not a meaningful structure.  Thus this value should not be used after
the end of the iterator.  The dereferences are just deleted from the
debugging statement.

This problem was found using Coccinelle (http://coccinelle.lip6.fr/).
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

dev->priomap is allocated by extend_netdev_table() called from
update_netdev_tables().
And this is only called if write_priomap() is called.

But if write_priomap() is not called, it seems we can have out of bounds
accesses in cgrp_destroy(), read_priomap() & skb_update_prio()

With help from Gao Feng
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Gao feng <gaofeng@cn.fujitsu.com>
Acked-by: NGao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The bonding debugfs support has been broken in the presence of network
namespaces since it has been added.  The debugfs support does not handle
multiple bonding devices with the same name in different network
namespaces.

I haven't had any bug reports, and I'm not interested in getting any.
Disable the debugfs support when network namespaces are enabled.
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It was recently reported that moving a bonding device between network
namespaces causes warnings from /proc.  It turns out after the move we
were trying to add and to remove the /proc/net/bonding entries from the
wrong network namespace.

Move the bonding /proc registration code into the NETDEV_REGISTER and
NETDEV_UNREGISTER events where the proc registration and unregistration
will always happen at the right time.
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For the higher mtu sizes requiring the buffer size greater than 8192,
the buffers are sent or received using multiple dma descriptors/ same
descriptor with option of multi buffer handling.
It was observed during tests that the driver was missing on data
packets during the normal ping operations if the data buffers being used
catered to jumbo frame handling.

The memory barrriers are added in between preparation of dma descriptors
in the jumbo frame handling path to ensure all instructions before
enabling the dma are complete.
Signed-off-by: NDeepak Sikri <deepak.sikri@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It was observed that during multiple reboots nfs hangs. The status of
receive descriptors shows that all the descriptors were in control of
CPU, and none were assigned to DMA.
Also the DMA status register confirmed that the Rx buffer is
unavailable.

This patch adds the fix for the same by adding the memory barriers to
ascertain that the all instructions before enabling the Rx or Tx DMA are
completed which involves the proper setting of the ownership bit in DMA
descriptors.
Signed-off-by: NDeepak Sikri <deepak.sikri@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem

When we remove a key, we put a key index which was supposed
to tell the fw that we are actually removing the key. But
instead the fw took that index as a valid index and messed
up the SRAM of the device.

This memory corruption on the device mangled the data of
the SCD. The impact on the user is that SCD queue 2 got
stuck after having removed keys.
Reported-by: NPaul Bolle <pebolle@tiscali.nl>
Cc: stable@vger.kernel.org
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This is iwlegacy version of:

commit 342bbf3f
Author: Johannes Berg <johannes.berg@intel.com>
Date:   Sun Mar 4 08:50:46 2012 -0800

    iwlwifi: always monitor for stuck queues

    If we only monitor while associated, the following
    can happen:
     - we're associated, and the queue stuck check
       runs, setting the queue "touch" time to X
     - we disassociate, stopping the monitoring,
       which leaves the time set to X
     - almost 2s later, we associate, and enqueue
       a frame
     - before the frame is transmitted, we monitor
       for stuck queues, and find the time set to
       X, although it is now later than X + 2000ms,
       so we decide that the queue is stuck and
       erroneously restart the device

Cc: stable@vger.kernel.org
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

On rt2x00_dmastart() we increase index specified by Q_INDEX and on
rt2x00_dmadone() we increase index specified by Q_INDEX_DONE. So entries
between Q_INDEX_DONE and Q_INDEX are those we currently process in the
hardware. Entries between Q_INDEX and Q_INDEX_DONE are those we can
submit to the hardware.

According to that fix rt2x00usb_kick_queue(), as we need to submit RX
entries that are not processed by the hardware. It worked before only
for empty queue, otherwise was broken.

Note that for TX queues indexes ordering are ok. We need to kick entries
that have filled skb, but was not submitted to the hardware, i.e.
started from Q_INDEX_DONE and have ENTRY_DATA_PENDING bit set.

From practical standpoint this fixes RX queue stall, usually reproducible
in AP mode, like for example reported here:
https://bugzilla.redhat.com/show_bug.cgi?id=828824Reported-and-tested-by: NFranco Miceli <fmiceli@plan.ceibal.edu.uy>
Reported-and-tested-by: NTom Horsley <horsley1953@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

> *. CID 709078: Resource leak (RESOURCE_LEAK)
> 	- drivers/net/wireless/mwifiex/cfg80211.c, line: 935
> Assigning: "bss_cfg" = storage returned from "kzalloc(132UL, 208U)"
> 	- but was not free
> drivers/net/wireless/mwifiex/cfg80211.c:935
Signed-off-by: NBing Zhao <bzhao@marvell.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

If association failed due to internal error (e.g. no
supported rates IE), we call ieee80211_destroy_assoc_data()
with assoc=true, while we actually reject the association.

This results in the BSSID not being zeroed out.

After passing assoc=false, we no longer have to call
sta_info_destroy_addr() explicitly. While on it, move
the "associated" message after the assoc_success check.

Cc: stable@vger.kernel.org [3.4+]
Signed-off-by: NEliad Peller <eliad@wizery.com>
Reviewed-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

llcp_sock_getname can be called without a device attached to the nfc_llcp_sock.

This would lead to the following BUG:

[  362.341807] BUG: unable to handle kernel NULL pointer dereference at           (null)
[  362.341815] IP: [<ffffffff836258e5>] llcp_sock_getname+0x75/0xc0
[  362.341818] PGD 31b35067 PUD 30631067 PMD 0
[  362.341821] Oops: 0000 [#627] PREEMPT SMP DEBUG_PAGEALLOC
[  362.341826] CPU 3
[  362.341827] Pid: 7816, comm: trinity-child55 Tainted: G      D W    3.5.0-rc4-next-20120628-sasha-00005-g9f23eb7 #479
[  362.341831] RIP: 0010:[<ffffffff836258e5>]  [<ffffffff836258e5>] llcp_sock_getname+0x75/0xc0
[  362.341832] RSP: 0018:ffff8800304fde88  EFLAGS: 00010286
[  362.341834] RAX: 0000000000000000 RBX: ffff880033cb8000 RCX: 0000000000000001
[  362.341835] RDX: ffff8800304fdec4 RSI: ffff8800304fdec8 RDI: ffff8800304fdeda
[  362.341836] RBP: ffff8800304fdea8 R08: 7ebcebcb772b7ffb R09: 5fbfcb9c35bdfd53
[  362.341838] R10: 4220020c54326244 R11: 0000000000000246 R12: ffff8800304fdec8
[  362.341839] R13: ffff8800304fdec4 R14: ffff8800304fdec8 R15: 0000000000000044
[  362.341841] FS:  00007effa376e700(0000) GS:ffff880035a00000(0000) knlGS:0000000000000000
[  362.341843] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  362.341844] CR2: 0000000000000000 CR3: 0000000030438000 CR4: 00000000000406e0
[  362.341851] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  362.341856] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  362.341858] Process trinity-child55 (pid: 7816, threadinfo ffff8800304fc000, task ffff880031270000)
[  362.341858] Stack:
[  362.341862]  ffff8800304fdea8 ffff880035156780 0000000000000000 0000000000001000
[  362.341865]  ffff8800304fdf78 ffffffff83183b40 00000000304fdec8 0000006000000000
[  362.341868]  ffff8800304f0027 ffffffff83729649 ffff8800304fdee8 ffff8800304fdf48
[  362.341869] Call Trace:
[  362.341874]  [<ffffffff83183b40>] sys_getpeername+0xa0/0x110
[  362.341877]  [<ffffffff83729649>] ? _raw_spin_unlock_irq+0x59/0x80
[  362.341882]  [<ffffffff810f342b>] ? do_setitimer+0x23b/0x290
[  362.341886]  [<ffffffff81985ede>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  362.341889]  [<ffffffff8372a539>] system_call_fastpath+0x16/0x1b
[  362.341921] Code: 84 00 00 00 00 00 b8 b3 ff ff ff 48 85 db 74 54 66 41 c7 04 24 27 00 49 8d 7c 24 12 41 c7 45 00 60 00 00 00 48 8b 83 28 05 00 00 <8b> 00 41 89 44 24 04 0f b6 83 41 05 00 00 41 88 44 24 10 0f b6
[  362.341924] RIP  [<ffffffff836258e5>] llcp_sock_getname+0x75/0xc0
[  362.341925]  RSP <ffff8800304fde88>
[  362.341926] CR2: 0000000000000000
[  362.341928] ---[ end trace 6d450e935ee18bf3 ]---
Signed-off-by: NSasha Levin <levinsasha928@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

msp has type struct minstrel_ht_sta_priv not struct minstrel_ht_sta.

(This incorporates the fixup originally posted as "mac80211: fix kzalloc
memory corruption introduced in minstrel_ht". -- JWL)
Reported-by: NFengguang Wu <wfg@linux.intel.com>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NThomas Huehn <thomas@net.t-labs.tu-berlin.de>
Acked-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Pablo Neira Ayuso says:

====================
* One to get the timeout special parameter for the SET target back working
  (this was introduced while trying to fix another bug in 3.4) from
  Jozsef Kadlecsik.

* One crash fix if containers and nf_conntrack are used reported by Hans
  Schillstrom by myself.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hans reports that he's still hitting:

BUG: unable to handle kernel NULL pointer dereference at 000000000000027c
IP: [<ffffffff813615db>] netlink_has_listeners+0xb/0x60
PGD 0
Oops: 0000 [#3] PREEMPT SMP
CPU 0

It happens when adding a number of containers with do:

nfct_query(h, NFCT_Q_CREATE, ct);

and most likely one namespace shuts down.

this problem was supposed to be fixed by:
70e9942f netfilter: nf_conntrack: make event callback registration per-netns

Still, it was missing one rcu_access_pointer to check if the callback
is set or not.
Reported-by: NHans Schillstrom <hans@schillstrom.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

The patch "127f5591 netfilter: ipset: fix timeout value overflow bug"
broke the SET target when no timeout was specified.
Reported-by: NJean-Philippe Menil <jean-philippe.menil@univ-nantes.fr>
Signed-off-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

commit c0357e97
    bnx2: stop using net_device.{base_addr, irq}.

removed netdev->base_addr so we need to update cnic to get the MMIO
base address from pci_resource_start().  Otherwise, mmap of the uio
device will fail.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adding a device with limited QMI support. It does not support
normal QMI_WDS commands for connection management. Instead,
sending a QMI_CTL SET_INSTANCE_ID command is required to
enable the network interface:

  01 0f 00 00 00 00 00 00  20 00 04 00 01 01 00 00

A number of QMI_DMS and QMI_NAS commands are also supported
for optional device management.
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

we set max_prioidx to the first zero bit index of prioidx_map in
function get_prioidx.

So when we delete the low index netprio cgroup and adding a new
netprio cgroup again,the max_prioidx will be set to the low index.

when we set the high index cgroup's net_prio.ifpriomap,the function
write_priomap will call update_netdev_tables to alloc memory which
size is sizeof(struct netprio_map) + sizeof(u32) * (max_prioidx + 1),
so the size of array that map->priomap point to is max_prioidx +1,
which is low than what we actually need.

fix this by adding check in get_prioidx,only set max_prioidx when
max_prioidx low than the new prioidx.
Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With lockdep enabled we get:

=============================================
[ INFO: possible recursive locking detected ]
3.4.4-Cavium-Octeon+ #313 Not tainted
---------------------------------------------
kworker/u:1/36 is trying to acquire lock:
(&bus->mdio_lock){+.+...}, at: [<ffffffff813da7e8>] mdio_mux_read+0x38/0xa0

but task is already holding lock:
 (&bus->mdio_lock){+.+...}, at: [<ffffffff813d79e4>] mdiobus_read+0x44/0x88

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&bus->mdio_lock);
  lock(&bus->mdio_lock);

 *** DEADLOCK ***

 May be due to missing lock nesting notation
.
.
.

This is a false positive, since we are indeed using 'nested' locking,
we need to use mutex_lock_nested().

Now in theory we can stack multiple MDIO multiplexers, but that would
require passing the nesting level (which is difficult to know) to
mutex_lock_nested().  Instead we assume the simple case of a single
level of nesting.  Since these are only warning messages, it isn't so
important to solve the general case.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

DCB and SR-IOV cannot currently be enabled at the same time as the queueing
schemes are incompatible.  If they are both enabled it will result in Tx
hangs since only the first Tx queue will be able to transmit any traffic.

This simple fix for this is to block us from enabling TCs in ixgbe_setup_tc
if SR-IOV is enabled.  This change will be reverted once we can support
SR-IOV and DCB coexistence.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Acked-by: NJohn Fastabend <john.r.fastabend@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: NRoss Brattain <ross.b.brattain@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix two netem bugs :

1) When a frame was dropped by tfifo_enqueue(), drop counter
   was incremented twice.

2) When reordering is triggered, we enqueue a packet without
   checking queue limit. This can OOM pretty fast when this
   is repeated enough, since skbs are orphaned, no socket limit
   can help in this situation.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Mark Gordon <msg@google.com>
Cc: Andreas Terzis <aterzis@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

some people report atl1c could cause system hang with following
kernel trace info:
---------------------------------------
WARNING: at.../net/sched/sch_generic.c:258 dev_watchdog+0x1db/0x1d0()
...
NETDEV WATCHDOG: eth0 (atl1c): transmit queue 0 timed out
...
---------------------------------------
This is caused by netif_stop_queue calling when cable Link is down.
So remove netif_stop_queue, because link_watch will take it over.
Signed-off-by: Nxiong <xiong@qca.qualcomm.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NCloud Ren <cjren@qca.qualcomm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit a1c7fff7 (net: netdev_alloc_skb() use build_skb()) broke b44 on
some 64bit machines.

It appears b44 and b43 use __netdev_alloc_skb() instead of alloc_skb()
for their bounce buffers.

There is no need to add an extra NET_SKB_PAD reservation for bounce
buffers :

- In TX path, NET_SKB_PAD is useless

- In RX path in b44, we force a copy of incoming frames if
  GFP_DMA allocations were needed.
Reported-and-bisected-by: NStefan Bader <stefan.bader@canonical.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently when sending data over datagram, the send function will attempt to
allocate any size passed on from the userspace.

We should make sure that this size is checked and limited. We'll limit it
to the MTU of the device, which is checked later anyway.
Signed-off-by: NSasha Levin <levinsasha928@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull fix to common clk framework from Michael Turquette:
 "The previous set of common clk fixes for -rc5 left an uninitialized
  int which could lead to bad array indexing when switching clock
  parents.  The issue is fixed with a trivial change to the code flow in
  __clk_set_parent."

* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux:
  clk: fix parent validation in __clk_set_parent()

Pull raid10 build failure fix from NeilBrown:
 "I really shouldn't do important things late in the day.  It seems that
  I get careless."

* tag 'md-3.5-fixes' of git://neil.brown.name/md:
  md/raid10: fix careless build error

Pull networking update from David Miller:

 1) Fix RX sequence number handling in mwifiex, from Stone Piao.

 2) Netfilter ipset mis-compares device names, fix from Florian
    Westphal.

 3) Fix route leak in ipv6 IPVS, from Eric Dumazet.

 4) NFS fixes.  Several buffer overflows in NCI layer from Dan
    Rosenberg, and release sock OOPS'er fix from Eric Dumazet.

 5) Fix WEP handling ath9k, we started using a bit the chip provides to
    indicate undecrypted packets but that bit turns out to be unreliable
    in certain configurations.  Fix from Felix Fietkau.

 6) Fix Kconfig dependency bug in wlcore, from Randy Dunlap.

 7) New USB IDs for rtlwifi driver from Larry Finger.

 8) Fix crashes in qmi_wwan usbnet driver when disconnecting, from Bjørn
    Mork.

 9) Gianfar driver programs coalescing settings properly in single queue
    mode, but does not do so in multi-queue mode.  Fix from Claudiu
    Manoil.

10) Missing module.h include in davinci_cpdma.c, from Daniel Mack.

11) Need dummy handler for IPSET_CMD_NONE otherwise we crash in ipset if
    we get this via nfnetlink, fix from Tomasz Bursztyka.

12) Missing RCU unlock in nfnetlink error path, also from Tomasz.

13) Fix divide by zero in igbvf when the user tries to set an RX
    coalescing value of 0 usecs, from Mitch A Williams.

14) We can process SCTP sacks for the wrong transport, oops.  Fix from
    Neil Horman.

15) Remove hw IP payload checksumming from e1000e driver.  This has zery
    value in our stack, and turning it on creates a very unintuitive
    restriction for users when using jumbo MTUs.

    Specifically, when IP payload checksums are on you cannot use both
    receive hashing offload and jumbo MTU.  Fix from Bruce Allan.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits)
  e1000e: remove use of IP payload checksum
  sctp: be more restrictive in transport selection on bundled sacks
  igbvf: fix divide by zero
  netfilter: nfnetlink: fix missing rcu_read_unlock in nfnetlink_rcv_msg
  netfilter: ipset: fix crash if IPSET_CMD_NONE command is sent
  davinci_cpdma: include linux/module.h
  gianfar: Fix RXICr/TXICr programming for multi-queue mode
  net: Downgrade CAP_SYS_MODULE deprecated message from error to warning.
  net: qmi_wwan: fix Oops while disconnecting
  mwifiex: fix memory leak associated with IE manamgement
  ath9k: fix panic caused by returning a descriptor we have queued for reuse
  mac80211: correct behaviour on unrecognised action frames
  ath9k: enable serialize_regmode for non-PCIE AR9287
  rtlwifi: rtl8192cu: New USB IDs
  NFC: Return from rawsock_release when sk is NULL
  iwlwifi: fix activating inactive stations
  wlcore: drop INET dependency
  ath9k: fix dynamic WEP related regression
  NFC: Prevent multiple buffer overflows in NCI
  netfilter: update location of my trees
  ...

build error introduced by commit b357f04a

That function doesn't get extra args until a later patch.  Bother.

Reported-by: Fengguang Wu <wfg@linux.intel.com> 
Reported-by: NSimon Kirby <sim@hostway.ca>
Reported-by: NTobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Signed-off-by: NNeilBrown <neilb@suse.de>

In commit 070ad7e7 ("floppy: convert to delayed work and
single-thread wq") the 'fd_timeout' timer was converted to a delayed
work.  However, the "del_timer(&fd_timeout)" was lost in the process,
and any previous pending timeouts would stay active when we then
re-queued the timeout.

This resulted in the floppy probe sequence having a (stale) 20s timeout
rather than the intended 3s timeout, and thus made booting with the
floppy driver (but no actual floppy controller) take much longer than it
should.

Of course, there's little reason for most people to compile the floppy
driver into the kernel at all, which is why most people never noticed.

Canceling the delayed work where we used to do the del_timer() fixes the
issue, and makes the floppy probing use the proper new timeout instead.
The three second timeout is still very wasteful, but better than the 20s
one.
Reported-and-tested-by: NAndi Kleen <ak@linux.intel.com>
Reported-and-tested-by: NCalvin Walton <calvin.walton@kepstin.ca>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull block bits from Jens Axboe:
 "As vacation is coming up, thought I'd better get rid of my pending
  changes in my for-linus branch for this iteration.  It contains:

   - Two patches for mtip32xx.  Killing a non-compliant sysfs interface
     and moving it to debugfs, where it belongs.

   - A few patches from Asias.  Two legit bug fixes, and one killing an
     interface that is no longer in use.

   - A patch from Jan, making the annoying partition ioctl warning a bit
     less annoying, by restricting it to !CAP_SYS_RAWIO only.

   - Three bug fixes for drbd from Lars Ellenberg.

   - A fix for an old regression for umem, it hasn't really worked since
     the plugging scheme was changed in 3.0.

   - A few fixes from Tejun.

   - A splice fix from Eric Dumazet, fixing an issue with pipe
     resizing."

* 'for-linus' of git://git.kernel.dk/linux-block:
  scsi: Silence unnecessary warnings about ioctl to partition
  block: Drop dead function blk_abort_queue()
  block: Mitigate lock unbalance caused by lock switching
  block: Avoid missed wakeup in request waitqueue
  umem: fix up unplugging
  splice: fix racy pipe->buffers uses
  drbd: fix null pointer dereference with on-congestion policy when diskless
  drbd: fix list corruption by failing but already aborted reads
  drbd: fix access of unallocated pages and kernel panic
  xen/blkfront: Add WARN to deal with misbehaving backends.
  blkcg: drop local variable @q from blkg_destroy()
  mtip32xx: Create debugfs entries for troubleshooting
  mtip32xx: Remove 'registers' and 'flags' from sysfs
  blkcg: fix blkg_alloc() failure path
  block: blkcg_policy_cfq shouldn't be used if !CONFIG_CFQ_GROUP_IOSCHED
  block: fix return value on cfq_init() failure
  mtip32xx: Remove version.h header file inclusion
  xen/blkback: Copy id field when doing BLKIF_DISCARD.

The below commit introduced a bug in __clk_set_parent()
which could cause it to *skip* the parent validation
which makes sure the parent passed to the api is a valid
one.

    commit 7975059d
    Author: Rajendra Nayak <rnayak@ti.com>
    Date:   Wed Jun 6 14:41:31 2012 +0530

        clk: Allow late cache allocation for clk->parents

This was identified by the following compiler warning..

    drivers/clk/clk.c: In function '__clk_set_parent':
    drivers/clk/clk.c:1083:5: warning: 'i' may be used uninitialized in this function [-Wuninitialized]

.. as reported by Marc Kleine-Budde.

There were various options discussed on how to fix this, one
being initing 'i' to clk->num_parents, but the below approach
was found to be more appropriate as it also makes the 'parent
validation' code simpler to read.
Reported-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Signed-off-by: NMike Turquette <mturquette@linaro.org>
Cc: stable@kernel.org

Pull sound fixes from Takashi Iwai:
 "Just a few driver-specific fixes for ASoC and HD-audio."

* tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Fix no sound from ALC662 after Windows reboot
  ASoC: tlv320aic3x: Fix codec pll configure bug
  ASoC: wm2200: Add missing BCLK rate

Pull device-mapper fixes from Alasdair G Kergon:
 "Four minor thin provisioning fixes and correct and update dm-verity
  documentation."

* tag 'dm-3.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
  dm: verity fix documentation
  dm persistent data: fix allocation failure in space map checker init
  dm persistent data: handle space map checker creation failure
  dm persistent data: fix shadow_info_leak on dm_tm_destroy
  dm thin: commit metadata before creating metadata snapshot

Pull drm fixes from Dave Airlie:
 "One regression fix, two radeon fixes (one for an oops), and an i915
  fix to unload framebuffers earlier.

  We originally were going to leave the i915 fix until -next, but grub2
  in some situations causes vesafb/efifb to be loaded now, and this
  causes big slowdowns, and I have reports in rawhide I'd like to have
  fixed."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/i915: kick any firmware framebuffers before claiming the gtt
  drm: edid: Don't add inferred modes with higher resolution
  drm/radeon: fix rare segfault
  drm/radeon: fix VM page table setup on SI

Pull md fixes from NeilBrown:
 "md: collection of bug fixes for 3.5

  You go away for 2 weeks vacation and what do you get when you come
  back? Piles of bugs :-)

  Some found by inspection, some by testing, some during use in the
  field, and some while developing for the next window..."

* tag 'md-3.5-fixes' of git://neil.brown.name/md:
  md: fix up plugging (again).
  md: support re-add of recovering devices.
  md/raid1: fix bug in read_balance introduced by hot-replace
  raid5: delayed stripe fix
  md/raid456: When read error cannot be recovered, record bad block
  md: make 'name' arg to md_register_thread non-optional.
  md/raid10: fix failure when trying to repair a read error.
  md/raid5: fix refcount problem when blocked_rdev is set.
  md:Add blk_plug in sync_thread.
  md/raid5: In ops_run_io, inc nr_pending before calling md_wait_for_blocked_rdev
  md/raid5: Do not add data_offset before call to is_badblock
  md/raid5: prefer replacing failed devices over want-replacement devices.
  md/raid10: Don't try to recovery unmatched (and unused) chunks.

Pull security layer fixes from James Morris.

A documentation update, and a nommu build fix.

* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  security: Fix nommu build.
  security: document no_new_privs