- 15 3月, 2015 3 次提交
-
-
由 Alexander Aring 提交于
It's only necessary to offer the name and index, others value are available over netlink. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
Currently the wpan_phy under /sys/class/ieee802154/ is named as "wpan-phy#", this patch will change the name to phy. This will introduce the same naming convention like wireless. Note: wpan-tools users will not type "wpan-phy#" anymore, just a simple "phy#" is enough. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
Currently there exists two interface types with ARPHRD_IEEE802154. These are the 802.15.4 interfaces and 802.15.4 6LoWPAN interfaces. This is more a bug because some userspace applications checks on this value like wireshark. This occurs that wireshark will always try to parse a lowpan interface as 802.15.4 frames. With ARPHRD_6LOWPAN wireshark will parse it as IPv6 frames which is correct. Much applications checks on this value to readout the EUI64 mac address which should be the same for ARPHRD_6LOWPAN. BTLE 6LoWPAN and ieee802154 6LoWPAN will share now the same ARPHRD. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
- 14 3月, 2015 2 次提交
-
-
由 Marcel Holtmann 提交于
With the extension of hdev->dev_flags utilizing a bitmap now, the space is no longer restricted. Merge the hdev->dbg_flags into hdev->dev_flags to save space on 64-bit architectures. On 32-bit architectures no size reduction happens. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Marcel Holtmann 提交于
The hdev->dev_flags field has outgrown itself on 32-bit systems. So instead of hacking around it, switch to using DECLARE_BITMAP. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
- 13 3月, 2015 9 次提交
-
-
由 Daniel Drake 提交于
Multiple codepaths duplicate some simple code to read and sanity-check local version information. Before I add a couple more such codepaths, add a helper to reduce duplication. Signed-off-by: NDaniel Drake <drake@endlessm.com> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Marcel Holtmann 提交于
Instead of manually coding test_and_set_bit on hdev->dev_flags all the time, use hci_dev_test_and_set_flag helper macro. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Marcel Holtmann 提交于
Instead of manually coding test_and_clear_bit on hdev->dev_flags all the time, use hci_dev_test_and_clear_flag helper macro. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Marcel Holtmann 提交于
Instead of manually coding test_and_change_bit on hdev->dev_flags all the time, use hci_dev_test_and_change_flag helper macro. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Marcel Holtmann 提交于
Instead of manually coding change_bit on hdev->dev_flags all the time, use hci_dev_change_flag helper macro. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Marcel Holtmann 提交于
Instead of manually coding clear_bit on hdev->dev_flags all the time, use hci_dev_clear_flag helper macro. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Marcel Holtmann 提交于
Instead of manually coding set_bit on hdev->dev_flags all the time, use hci_dev_set_flag helper macro. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Marcel Holtmann 提交于
Instead of manually coding test_bit on hdev->dev_flags all the time, use hci_dev_test_flag helper macro. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Marcel Holtmann 提交于
The patch adds a second advertising setting that allows switching of the controller into connectable mode independent of the global connectable setting. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
- 12 3月, 2015 1 次提交
-
-
由 Marcel Holtmann 提交于
The SMP code contains two else branches that are not needed since the successful test will actually leave the function. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
- 11 3月, 2015 6 次提交
-
-
由 Johan Hedberg 提交于
If we're given an RPA when checking whether we're paired or not, we should consult the local RPA storage whether there's a matching IRK. This we we ensure that hci_bdaddr_is_paired() gives the right result even when trying to pair a second time with the same device with an RPA. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
When finding a matching LTK the rcu_read_unlock() function was failing to release the RCU read lock. This patch adds the missing call to rcu_reaD_unlock(). Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
This patch increments the management interface revision due to introduction of new static address setting and fixes for the fast connectable feature. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Kim, Ben Young Tae 提交于
While qca_device_info is not coming from outside communication, no reason to use specific endian type inside and fix the wrong version comparison on big-endian platform. Signed-off-by: NBen Young Tae Kim <ytkim@qca.qualcomm.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
To make the behavior predictable when attempting to pair with a device for which we already have a Link Key or Long Term Key, this patch adds a new 'Already Paired' error which gets sent in such a scenario. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
To maximize the usability of the Fast Connectable feature we should make it possible to set (or unset) it at any given moment. This means removing the dependency on the 'connectable' setting as well as the 'powered' setting. The former makes also sense since page scan may get enabled through add_device even if 'connectable' is false. To keep the setting available over power cycles its flag also needs to be removed from the flags that are cleared upon HCI_Reset. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
- 08 3月, 2015 1 次提交
-
-
由 Alexander Aring 提交于
While compiling the following warning occurs: WARNING: net/built-in.o(.init.text+0x602c): Section mismatch in reference from the function bt_init() to the function .exit.text:sco_exit() The function __init bt_init() references a function __exit sco_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __exit annotation of sco_exit() so it may be used outside an exit section. Since commit 6d785aa3 ("Bluetooth: Convert mgmt to use HCI chan registration API") the function "sco_exit" is used inside of function "bt_init". The suggested solution by remove the __exit annotation solved this issue. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
- 07 3月, 2015 8 次提交
-
-
由 Johan Hedberg 提交于
Currently the mgmt_event() function is only capable of sending to HCI_CHANNEL_CONTROL. To void having to change all users of it, add a new mgmt_send_event() function that takes a channel parameter, and make the old mgmt_event() a wrapper that passes MGMT_CHANNEL_CONTROL to it. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
This patch renames the pending_cmd struct (used for tracking pending mgmt commands) to mgmt_pending_cmd, so that it can be moved to a more generic place and be used also by other modules using other HCI channels. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
This patch renames the cmd_complete() function to mgmt_cmd_complete() in preparation of making it a generic helper for other modules to use too. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
This patch renames the cmd_status() function to mgmt_cmd_status() in preparation of making it a generic helper for other modules to use too. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
In order to completely generalize the mgmt command handling we need to move away command-specific information from mgmt_control() into the actual command table. This patch adds a new 'flags' field to the handler entries which can now contain the following command specific information: - Command takes variable length parameters - Command doesn't target any specific HCI device - Command can be sent when the HCI device is unconfigured After this the mgmt_control() function is completely generic and can potentially be reused by new HCI channels. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
This patch converts the existing mgmt code to use the newly introduced generic API for registering HCI channels with mgmt-like semantics. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Johan Hedberg 提交于
This patch adds an API for registering HCI channels with mgmt-like semantics. For now the only user will be HCI_CHANNEL_CONTROL, but e.g. 6lowpan is intended to use this as well in the future. Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
Currently it is not possible to determine if the static address is used by the controller. It is also not possible to determine if using a static on a dual-mode controller with disabled BR/EDR is possible or not. To address this issue, introduce a new setting called static-address. If support for this setting is signaled that means that the kernel supports using static addresses. And if used on dual-mode controllers with BR/EDR disabled it means that a configured static address can be used. In addition utilize the same setting for the list of current active settings that indicates if a static address is configured and if that address will be actually used. With this in mind the existing Set Static Address management command has been extended to return the current settings. That way the caller of that command can easily determine if the programmed address will be used or if extra steps are required. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
- 05 3月, 2015 3 次提交
-
-
由 Jakub Pawlowski 提交于
This patch fixes service discovery behaviour, when provided uuid filter is empty and HCI_QUIRK_STRICT_DUPLICATE_FILTER is set. Before this patch, empty uuid filter was unable to trigger scan restart, and that caused inconsistent behaviour in applications. Example: two DBus clients call BlueZ, one to find all devices with service abcd, second to find all devices with rssi smaller than -90. Sum of those filters, that is passed to mgmt_service_scan is empty filter, with no rssi or uuids set. That caused kernel not to restart scan when quirk was set. That was inconsistent with what happen when there's only one of those two filters set (scan is restarted and reports devices). To fix that, new variable hdev->discovery.result_filtering was introduced. It can indicate that filtered scan is running, no matter what uuid or rssi filter is set. Signed-off-by: NJakub Pawlowski <jpawlowski@google.com> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Jakub Pawlowski 提交于
This patch refactor code responsible for filtering when service discovery method is used. Previously this code was mixed with mgmt_device found logic. Now when it's in one place whole logic can be greatly simplified. That includes removing no longer necessary length field and merging checks for eir and scan_rsp. Signed-off-by: NJakub Pawlowski <jpawlowski@google.com> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
由 Jakub Pawlowski 提交于
This patch moves whole packet filering logic of service discovery into new function is_filter_match. It's done because logic inside mgmt_device_found is very complicated and needs some simplification. Also having whole logic in one place will allow to simplify it in the future. Signed-off-by: NJakub Pawlowski <jpawlowski@google.com> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
- 03 3月, 2015 7 次提交
-
-
由 Alexander Aring 提交于
In the most cases the spi messages has a length of two. Currently we always set the the len field to two before transmit a spi message. In cases for read out/write in the frame buffer we need another len. This patch use trx len two as default. For the frame buffer cases we restore the trx len to two on success and failure. This will reduce the len setting of two when it's already two. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch cleanups the referencing for the state change context variable. The state change context should only set once and this is by initial a state change. This patch will use the initial state change variable in the complete handler of the state change by using the ctx context which should be always the same like the initial state change context. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
By holding the irq variable inside at86rf230_state_change we can squash some multiple dereferencing for getting irq num. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch refactor the receive handling into one function. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
I had this variable because I thought it would be protected by disable/enable irq but this is not true. It's protected by stop/wake netdev queue which is called by ieee802154_xmit_complete. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Alexander Aring 提交于
This patch introduce a transmit retry handling into at86rf230 transmit path. Current behaviour is to wait the normal receive time if we want to go into STATE_TX_ON when the transceiver is in STATE_BUSY_RX_AACK which indicates that a frame is currently receiving. A non force state change will not interrupt the the receiving state. The current behaviour is that after the normal receive time we will start a force change into STATE_TX_ON. With this patch we do seven retries to go into STATE_TX_ON without forcing. After we hit the AT86RF2XX_MAX_TX_RETRIES we will start the force state change. This is a polling like method to go into STATE_TX_ON in times of maximum receiving time. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Kim, Ben Young Tae 提交于
This patch supports ROME Bluetooth family from Qualcomm Atheros, e.g. QCA61x4 or QCA6574. New chipset have similar firmware downloading sequences to previous chipset from Atheros, however, it doesn't support vid/pid switching after downloading the patch so that firmware needs to be handled by btusb module directly. ROME chipset can be differentiated from previous version by reading ROM version. T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 16 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e300 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 8 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e360 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: NBen Young Tae Kim <ytkim@qca.qualcomm.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-