Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 15 4月, 2017 1 次提交
  3. 24 2月, 2017 1 次提交
  5. 18 2月, 2017 1 次提交
    • H
      Input: tsc2007 - add iio interface to read external ADC input and temperature · f1443404
      由 H. Nikolaus Schaller 提交于 
      The tsc2007 chip not only has a resistive touch screen controller but
also an external AUX adc imput which can be used for an ambient
light sensor, battery voltage monitoring or any general purpose.

Additionally it can measure the chip temperature.

This extension provides an iio interface for these adc channels.

Since it is not wasting much resources and is very straightforward,
we simply provide all other adc channels as optional iio interfaces
as weel. This can be used for debugging or special applications.

This patch also splits the tsc2007 driver in several source files:
tsc2007.h -- constants, structs and stubs
tsc2007_core.c -- functional parts of the original driver
tsc2007_iio.c -- the optional iio stuff

Makefile magic allows to conditionally link the iio stuff
if CONFIG_IIO=y or =m in a way that it works with
CONFIG_TOUCHSCREEN_TSC2007=m.
Signed-off-by: NH. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: NJonathan Cameron <jic23@kernel.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
      f1443404
  7. 10 2月, 2017 1 次提交
  9. 07 1月, 2017 1 次提交
  11. 27 9月, 2016 1 次提交
  13. 20 9月, 2016 1 次提交
    • A
      [media] Input: atmel_mxt: disallow impossible configuration · 7a4b9a29
      由 Arnd Bergmann 提交于 
      The newnly added debug mode for the atmel_mxt_ts driver relies on
the v4l2 interface and vb2_vmalloc, but those might be configured
as loadable modules when the driver itself is built-in, resulting
in a link failure:

drivers/input/touchscreen/atmel_mxt_ts.o: In function `mxt_vidioc_querycap':
atmel_mxt_ts.c:(.text.mxt_vidioc_querycap+0x10): undefined reference to `video_devdata'
drivers/input/touchscreen/atmel_mxt_ts.o: In function `mxt_buffer_queue':
atmel_mxt_ts.c:(.text.mxt_buffer_queue+0x20): undefined reference to `vb2_plane_vaddr'
atmel_mxt_ts.c:(.text.mxt_buffer_queue+0x164): undefined reference to `vb2_buffer_done'
drivers/input/touchscreen/atmel_mxt_ts.o: In function `mxt_free_object_table':
atmel_mxt_ts.c:(.text.mxt_free_object_table+0x18): undefined reference to `video_unregister_device'
atmel_mxt_ts.c:(.text.mxt_free_object_table+0x20): undefined reference to `v4l2_device_unregister'

The best workaround I could come up with is to disallow the debug
mode unless it's actually possible to call it.

Fixes: ecfdd7e2 ("[media] Input: atmel_mxt_ts - output diagnostic debug via V4L2 device")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NNick Dyer <nick@shmanahar.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
      7a4b9a29
  15. 24 8月, 2016 2 次提交
  17. 23 8月, 2016 1 次提交
  19. 04 8月, 2016 1 次提交
  21. 03 8月, 2016 2 次提交
  23. 28 5月, 2016 1 次提交
  25. 20 5月, 2016 1 次提交
  27. 19 5月, 2016 1 次提交
  29. 05 3月, 2016 1 次提交
  31. 18 2月, 2016 1 次提交
  33. 11 2月, 2016 1 次提交
  35. 10 2月, 2016 1 次提交
  37. 18 12月, 2015 1 次提交
    • I
      Input: goodix - reset device at init · ec6e1b40
      由 Irina Tirdea 提交于 
      After power on, it is recommended that the driver resets the device.
The reset procedure timing is described in the datasheet and is used
at device init (before writing device configuration) and
for power management. It is a sequence of setting the interrupt
and reset pins high/low at specific timing intervals. This procedure
also includes setting the slave address to the one specified in the
ACPI/device tree.

This is based on Goodix datasheets for GT911 and GT9271 and on Goodix
driver gt9xx.c for Android (publicly available in Android kernel
trees for various devices).

For reset the driver needs to control the interrupt and
reset gpio pins (configured through ACPI/device tree). For devices
that do not have the gpio pins properly declared, the functionality
depending on these pins will not be available, but the device can still
be used with basic functionality.

For both device tree and ACPI, the interrupt gpio pin configuration is
read from the "irq-gpios" property and the reset pin configuration is
read from the "reset-gpios" property. For ACPI 5.1, named properties
can be specified using the _DSD section. This functionality will not be
available for devices that use indexed gpio pins declared in the _CRS
section (we need to provide backward compatibility with devices
that do not support using the interrupt gpio pin as output).

For ACPI, the pins can be specified using ACPI 5.1:
Device (STAC)
{
    Name (_HID, "GDIX1001")
    ...

    Method (_CRS, 0, Serialized)
    {
        Name (RBUF, ResourceTemplate ()
        {
            I2cSerialBus (0x0014, ControllerInitiated, 0x00061A80,
                AddressingMode7Bit, "\\I2C0",
                0x00, ResourceConsumer, ,
                )

            GpioInt (Edge, ActiveHigh, Exclusive, PullNone, 0x0000,
                "\\I2C0", 0x00, ResourceConsumer, ,
                 )
                 {   // Pin list
                     0
                 }

            GpioIo (Exclusive, PullDown, 0x0000, 0x0000,
                IoRestrictionOutputOnly, "\\I2C0", 0x00,
                ResourceConsumer, ,
                )
                {
                     1
                }
        })
        Return (RBUF)
    }

    Name (_DSD,  Package ()
    {
        ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
        Package ()
        {
            Package (2) {"irq-gpios", Package() {^STAC, 0, 0, 0 }},
            Package (2) {"reset-gpios", Package() {^STAC, 1, 0, 0 }},
            ...
        }
    }
Signed-off-by: NOctavian Purdila <octavian.purdila@intel.com>
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Acked-by: NRob Herring <robh@kernel.org>
Acked-by: NBastien Nocera <hadess@hadess.net>
Tested-by: NBastien Nocera <hadess@hadess.net>
Tested-by: NAleksei Mamlin <mamlinav@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
      ec6e1b40
  39. 17 12月, 2015 2 次提交
  41. 02 12月, 2015 1 次提交
  43. 04 11月, 2015 2 次提交
  45. 19 10月, 2015 1 次提交
    • R
      Input: sur40 - add dependency on VIDEO_V4L2 · c8a1978e
      由 Randy Dunlap 提交于 
      Fix build errors due to missing Kconfig dependency.

drivers/built-in.o: In function `sur40_disconnect':
sur40.c:(.text+0x22be6e): undefined reference to `video_unregister_device'
sur40.c:(.text+0x22be77): undefined reference to `v4l2_device_unregister'
drivers/built-in.o: In function `sur40_process_video':
sur40.c:(.text+0x22c1d4): undefined reference to `v4l2_get_timestamp'
drivers/built-in.o: In function `sur40_probe':
sur40.c:(.text+0x22ca82): undefined reference to `v4l2_device_register'
sur40.c:(.text+0x22cb1a): undefined reference to `v4l2_device_unregister'
sur40.c:(.text+0x22cbf7): undefined reference to `video_device_release_empty'
sur40.c:(.text+0x22cc53): undefined reference to `__video_register_device'
sur40.c:(.text+0x22cc90): undefined reference to `video_unregister_device'
drivers/built-in.o: In function `sur40_vidioc_querycap':
sur40.c:(.text+0x22ccb0): undefined reference to `video_devdata'
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
      c8a1978e
  47. 06 10月, 2015 1 次提交
  49. 03 10月, 2015 1 次提交
  51. 06 9月, 2015 2 次提交
  53. 05 8月, 2015 1 次提交
  55. 28 7月, 2015 2 次提交
  57. 12 7月, 2015 1 次提交
  59. 25 6月, 2015 1 次提交
  61. 27 5月, 2015 1 次提交
  63. 01 5月, 2015 1 次提交
  65. 03 4月, 2015 1 次提交
  67. 25 3月, 2015 1 次提交