Free useless ucode_patch entry when it's replaced.

[ bp: Drop the memfree_patch() two-liner. ]
Signed-off-by: NZhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Srinivas REDDY Eeda <srinivas.eeda@oracle.com>
Link: http://lkml.kernel.org/r/888102f0-fd22-459d-b090-a1bd8a00cb2b@default

Add a kernel parameter that allows setting UV memory block size.  This
is to provide an adjustment for new forms of PMEM and other DIMM memory
that might require alignment restrictions other than scanning the global
address table for the required minimum alignment.  The value set will be
further adjusted by both the GAM range table scan as well as restrictions
imposed by set_memory_block_size_order().
Signed-off-by: NMike Travis <mike.travis@hpe.com>
Reviewed-by: NAndrew Banman <andrew.banman@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <russ.anderson@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dan.j.williams@intel.com
Cc: jgross@suse.com
Cc: kirill.shutemov@linux.intel.com
Cc: mhocko@suse.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/lkml/20180524201711.854849120@stormcage.americas.sgi.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Add a call to the new function to "adjust" the current fixed UV memory
block size of 2GB so it can be changed to a different physical boundary.
This accommodates changes in the Intel BIOS, and therefore UV BIOS,
which now can align boundaries different than the previous UV standard
of 2GB.  It also flags any UV Global Address boundaries from BIOS that
cause a change in the mem block size (boundary).

The current boundary of 2GB has been used on UV since the first system
release in 2009 with Linux 2.6 and has worked fine.  But the new NVDIMM
persistent memory modules (PMEM), along with the Intel BIOS changes to
support these modules caused the memory block size boundary to be set
to a lower limit.  Intel only guarantees that this minimum boundary at
64MB though the current Linux limit is 128MB.

Note that the default remains 2GB if no changes occur.
Signed-off-by: NMike Travis <mike.travis@hpe.com>
Reviewed-by: NAndrew Banman <andrew.banman@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <russ.anderson@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dan.j.williams@intel.com
Cc: jgross@suse.com
Cc: kirill.shutemov@linux.intel.com
Cc: mhocko@suse.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/lkml/20180524201711.732785782@stormcage.americas.sgi.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Add a new function to "adjust" the current fixed UV memory block size
of 2GB so it can be changed to a different physical boundary.  This is
out of necessity so arch dependent code can accommodate specific BIOS
requirements which can align these new PMEM modules at less than the
default boundaries.

A "set order" type of function was used to insure that the memory block
size will be a power of two value without requiring a validity check.
64GB was chosen as the upper limit for memory block size values to
accommodate upcoming 4PB systems which have 6 more bits of physical
address space (46 becoming 52).
Signed-off-by: NMike Travis <mike.travis@hpe.com>
Reviewed-by: NAndrew Banman <andrew.banman@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <russ.anderson@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dan.j.williams@intel.com
Cc: jgross@suse.com
Cc: kirill.shutemov@linux.intel.com
Cc: mhocko@suse.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/lkml/20180524201711.609546602@stormcage.americas.sgi.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

kexec-purgatory.c is properly generated when Kbuild descend into
the arch/x86/purgatory/.

Thus the 'archprepare' target is redundant.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/1529401422-28838-3-git-send-email-yamada.masahiro@socionext.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Reverts the following commit:

  b0108f9e ("kexec: purgatory: add clean-up for purgatory directory")

... which incorrectly stated that the kexec-purgatory.c and purgatory.ro files
were not removed after 'make mrproper'.

In fact, they are.  You can confirm it after reverting it.

  $ make mrproper
  $ touch arch/x86/purgatory/kexec-purgatory.c
  $ touch arch/x86/purgatory/purgatory.ro
  $ make mrproper
    CLEAN   arch/x86/purgatory
  $ ls arch/x86/purgatory/
  entry64.S  Makefile  purgatory.c  setup-x86_64.S  stack.S  string.c

This is obvious from the build system point of view.

arch/x86/Makefile adds 'arch/x86' to core-y.
Hence 'make clean' descends like this:

  arch/x86/Kbuild
    -> arch/x86/purgatory/Makefile
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/1529401422-28838-2-git-send-email-yamada.masahiro@socionext.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Commit:

  1f50ddb4 ("x86/speculation: Handle HT correctly on AMD")

... added speculative_store_bypass_ht_init() to the per-CPU initialization sequence.

speculative_store_bypass_ht_init() needs to be called on each CPU for
PV guests, too.
Reported-by: NBrian Woods <brian.woods@amd.com>
Tested-by: NBrian Woods <brian.woods@amd.com>
Signed-off-by: NJuergen Gross <jgross@suse.com>
Cc: <stable@vger.kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boris.ostrovsky@oracle.com
Cc: xen-devel@lists.xenproject.org
Fixes: 1f50ddb4 ("x86/speculation: Handle HT correctly on AMD")
Link: https://lore.kernel.org/lkml/20180621084331.21228-1-jgross@suse.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

fpu__drop() has an explicit fwait which under some conditions can trigger a
fixable FPU exception while in kernel. Thus, we should attempt to fixup the
exception first, and only call notify_die() if the fixup failed just like
in do_general_protection(). The original call sequence incorrectly triggers
KDB entry on debug kernels under particular FPU-intensive workloads.

Andy noted, that this makes the whole conditional irq enable thing even
more inconsistent, but fixing that it outside the scope of this.
Signed-off-by: NSiarhei Liakh <siarhei.liakh@concurrent-rt.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NAndy Lutomirski <luto@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Borislav  Petkov" <bpetkov@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/DM5PR11MB201156F1CAB2592B07C79A03B17D0@DM5PR11MB2011.namprd11.prod.outlook.com

New stepping of Skylake has fixes for cache occupancy and memory
bandwidth monitoring.

Update the code to enable these by default on newer steppings.
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: stable@vger.kernel.org # v4.14
Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Link: https://lkml.kernel.org/r/20180608160732.9842-1-tony.luck@intel.com

Extend the debugability of the vector management by adding the state bits
to the debugfs output.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NSong Liu <songliubraving@fb.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <liu.song.a23@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tariq Toukan <tariqt@mellanox.com>
Link: https://lkml.kernel.org/r/20180604162224.908136099@linutronix.de

The case that interrupt affinity setting fails with -EBUSY can be handled
in the kernel completely by using the already available generic pending
infrastructure.

If a irq_chip::set_affinity() fails with -EBUSY, handle it like the
interrupts for which irq_chip::set_affinity() can only be invoked from
interrupt context. Copy the new affinity mask to irq_desc::pending_mask and
set the affinity pending bit. The next raised interrupt for the affected
irq will check the pending bit and try to set the new affinity from the
handler. This avoids that -EBUSY is returned when an affinity change is
requested from user space and the previous change has not been cleaned
up. The new affinity will take effect when the next interrupt is raised
from the device.

Fixes: dccfe314 ("x86/vector: Simplify vector move cleanup")
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NSong Liu <songliubraving@fb.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <liu.song.a23@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: stable@vger.kernel.org
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tariq Toukan <tariqt@mellanox.com>
Link: https://lkml.kernel.org/r/20180604162224.819273597@linutronix.de

To address the EBUSY fail of interrupt affinity settings in case that the
previous setting has not been cleaned up yet, use the new apic_ack_irq()
function instead of the special uv_ack_apic() implementation which is
merily a wrapper around ack_APIC_irq().

Preparatory change for the real fix

Fixes: dccfe314 ("x86/vector: Simplify vector move cleanup")
Reported-by: NSong Liu <liu.song.a23@gmail.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NSong Liu <songliubraving@fb.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: stable@vger.kernel.org
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tariq Toukan <tariqt@mellanox.com>
Link: https://lkml.kernel.org/r/20180604162224.721691398@linutronix.de

To address the EBUSY fail of interrupt affinity settings in case that the
previous setting has not been cleaned up yet, use the new apic_ack_irq()
function instead of directly invoking ack_APIC_irq().

Preparatory change for the real fix

Fixes: dccfe314 ("x86/vector: Simplify vector move cleanup")
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NSong Liu <songliubraving@fb.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <liu.song.a23@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: stable@vger.kernel.org
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tariq Toukan <tariqt@mellanox.com>
Link: https://lkml.kernel.org/r/20180604162224.639011135@linutronix.de

To address the EBUSY fail of interrupt affinity settings in case that the
previous setting has not been cleaned up yet, use the new apic_ack_irq()
function instead of the special ir_ack_apic_edge() implementation which is
merily a wrapper around ack_APIC_irq().

Preparatory change for the real fix

Fixes: dccfe314 ("x86/vector: Simplify vector move cleanup")
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NSong Liu <songliubraving@fb.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <liu.song.a23@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: stable@vger.kernel.org
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tariq Toukan <tariqt@mellanox.com>
Link: https://lkml.kernel.org/r/20180604162224.555716895@linutronix.de

apic_ack_edge() is explicitely for handling interrupt affinity cleanup when
interrupt remapping is not available or disable.

Remapped interrupts and also some of the platform specific special
interrupts, e.g. UV, invoke ack_APIC_irq() directly.

To address the issue of failing an affinity update with -EBUSY the delayed
affinity mechanism can be reused, but ack_APIC_irq() does not handle
that. Adding this to ack_APIC_irq() is not possible, because that function
is also used for exceptions and directly handled interrupts like IPIs.

Create a new function, which just contains the conditional invocation of
irq_move_irq() and the final ack_APIC_irq().

Reuse the new function in apic_ack_edge().

Preparatory change for the real fix.

Fixes: dccfe314 ("x86/vector: Simplify vector move cleanup")
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NSong Liu <songliubraving@fb.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <liu.song.a23@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: stable@vger.kernel.org
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tariq Toukan <tariqt@mellanox.com>
Link: https://lkml.kernel.org/r/20180604162224.471925894@linutronix.de

The upcoming fix for the -EBUSY return from affinity settings requires to
use the irq_move_irq() functionality even on irq remapped interrupts. To
avoid the out of line call, move the check for the pending bit into an
inline helper.

Preparatory change for the real fix. No functional change.

Fixes: dccfe314 ("x86/vector: Simplify vector move cleanup")
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <liu.song.a23@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: stable@vger.kernel.org
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tariq Toukan <tariqt@mellanox.com>
Cc: Dou Liyang <douly.fnst@cn.fujitsu.com>
Link: https://lkml.kernel.org/r/20180604162224.471925894@linutronix.de

The generic pending interrupt mechanism moves interrupts from the interrupt
handler on the original target CPU to the new destination CPU. This is
required for x86 and ia64 due to the way the interrupt delivery and
acknowledge works if the interrupts are not remapped.

However that update can fail for various reasons. Some of them are valid
reasons to discard the pending update, but the case, when the previous move
has not been fully cleaned up is not a legit reason to fail.

Check the return value of irq_do_set_affinity() for -EBUSY, which indicates
a pending cleanup, and rearm the pending move in the irq dexcriptor so it's
tried again when the next interrupt arrives.

Fixes: 996c591227d9 ("x86/irq: Plug vector cleanup race")
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NSong Liu <songliubraving@fb.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <liu.song.a23@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: stable@vger.kernel.org
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tariq Toukan <tariqt@mellanox.com>
Link: https://lkml.kernel.org/r/20180604162224.386544292@linutronix.de

Several people observed the WARN_ON() in irq_matrix_free() which triggers
when the caller tries to free an vector which is not in the allocation
range. Song provided the trace information which allowed to decode the root
cause.

The rework of the vector allocation mechanism failed to preserve a sanity
check, which prevents setting a new target vector/CPU when the previous
affinity change has not fully completed.

As a result a half finished affinity change can be overwritten, which can
cause the leak of a irq descriptor pointer on the previous target CPU and
double enqueue of the hlist head into the cleanup lists of two or more
CPUs. After one CPU cleaned up its vector the next CPU will invoke the
cleanup handler with vector 0, which triggers the out of range warning in
the matrix allocator.

Prevent this by checking the apic_data of the interrupt whether the
move_in_progress flag is false and the hlist node is not hashed. Return
-EBUSY if not.

This prevents the damage and restores the behaviour before the vector
allocation rework, but due to other changes in that area it also widens the
chance that user space can observe -EBUSY. In theory this should be fine,
but actually not all user space tools handle -EBUSY correctly. Addressing
that is not part of this fix, but will be addressed in follow up patches.

Fixes: 69cde000 ("x86/vector: Use matrix allocator for vector assignment")
Reported-by: NDmitry Safonov <0x7f454c46@gmail.com>
Reported-by: NTariq Toukan <tariqt@mellanox.com>
Reported-by: NSong Liu <liu.song.a23@gmail.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NSong Liu <songliubraving@fb.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/20180604162224.303870257@linutronix.de

The vector_alloc tracepont reversed the reserved and ret aggs, that made
the trace print wrong. Exchange them.

Fixes: 8d1e3dca ("x86/vector: Add tracepoints for vector management")
Signed-off-by: NDou Liyang <douly.fnst@cn.fujitsu.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: hpa@zytor.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180601065031.21872-1-douly.fnst@cn.fujitsu.com

The idt_setup_apic_and_irq_gates() sets the gates from
FIRST_EXTERNAL_VECTOR up to FIRST_SYSTEM_VECTOR first. then secondly, from
FIRST_SYSTEM_VECTOR to NR_VECTORS, it takes both APIC=y and APIC=n into
account.

But for APIC=n, the FIRST_SYSTEM_VECTOR is equal to NR_VECTORS, all
vectors has been set at the first step.

Simplify the second step, make it just work for APIC=y.
Signed-off-by: NDou Liyang <douly.fnst@cn.fujitsu.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20180523023555.2933-1-douly.fnst@cn.fujitsu.com

Remove extra parentheses to fix the extraneous parentheses clang
warning.
Suggested-by: NLukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: NVarsha Rao <rvarsha016@gmail.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Nicholas Mc Guire <der.herr@hofr.at>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20180520080012.8215-1-rvarsha016@gmail.com

AMD SME claims one bit from physical address to indicate whether the
page is encrypted or not. To achieve that we clear out the bit from
__PHYSICAL_MASK.

The capability to adjust __PHYSICAL_MASK is required beyond AMD SME.
For instance for upcoming Intel Multi-Key Total Memory Encryption.

Factor it out into a separate feature with own Kconfig handle.

It also helps with overhead of AMD SME. It saves more than 3k in .text
on defconfig + AMD_MEM_ENCRYPT:

	add/remove: 3/2 grow/shrink: 5/110 up/down: 189/-3753 (-3564)

We would need to return to this once we have infrastructure to patch
constants in code. That's good candidate for it.
Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NTom Lendacky <thomas.lendacky@amd.com>
Cc: linux-mm@kvack.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20180518113028.79825-1-kirill.shutemov@linux.intel.com

When CONFIG_OPTIMIZE_INLINING is enabled, the function native_set_p4d()
may not be fully inlined into the caller, resulting in a false-positive
warning about an access to the __pgtable_l5_enabled variable from a
non-__init function, despite the original caller being an __init function:

WARNING: vmlinux.o(.text.unlikely+0x1429): Section mismatch in reference from the function native_set_p4d() to the variable .init.data:__pgtable_l5_enabled
WARNING: vmlinux.o(.text.unlikely+0x1429): Section mismatch in reference from the function native_p4d_clear() to the variable .init.data:__pgtable_l5_enabled

The function native_set_p4d() references the variable __initdata
__pgtable_l5_enabled.  This is often because native_set_p4d lacks a
__initdata annotation or the annotation of __pgtable_l5_enabled is wrong.

Marking the native_set_p4d function and its caller native_p4d_clear()
avoids this problem.

I did not bisect the original cause, but I assume this is related to the
recent rework that turned pgtable_l5_enabled() into an inline function,
which in turn caused the compiler to make different inlining decisions.

Fixes: ad3fe525 ("x86/mm: Unify pgtable_l5_enabled usage in early boot code")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Link: https://lkml.kernel.org/r/20180605113715.1133726-1-arnd@arndb.de

Merge these small and simple 1-2 commit branches into the urgent branch.
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Pull vfs fixes from Al Viro.

 - fix io_destroy()/aio_complete() race

 - the vfs_open() change to get rid of open_check_o_direct() boilerplate
   was nice, but buggy. Al has a patch avoiding a revert, but that's
   definitely not a last-day fodder, so for now revert it is...

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  Revert "fs: fold open_check_o_direct into do_dentry_open"
  fix io_destroy()/aio_complete() race

This reverts commit cab64df1.

Having vfs_open() in some cases drop the reference to
struct file combined with

	error = vfs_open(path, f, cred);
	if (error) {
		put_filp(f);
		return ERR_PTR(error);
	}
	return f;

is flat-out wrong.  It used to be

		error = vfs_open(path, f, cred);
		if (!error) {
			/* from now on we need fput() to dispose of f */
			error = open_check_o_direct(f);
			if (error) {
				fput(f);
				f = ERR_PTR(error);
			}
		} else {
			put_filp(f);
			f = ERR_PTR(error);
		}

and sure, having that open_check_o_direct() boilerplate gotten rid of is
nice, but not that way...

Worse, another call chain (via finish_open()) is FUBAR now wrt
FILE_OPENED handling - in that case we get error returned, with file
already hit by fput() *AND* FILE_OPENED not set.  Guess what happens in
path_openat(), when it hits

	if (!(opened & FILE_OPENED)) {
		BUG_ON(!error);
		put_filp(file);
	}

The root cause of all that crap is that the callers of do_dentry_open()
have no way to tell which way did it fail; while that could be fixed up
(by passing something like int *opened to do_dentry_open() and have it
marked if we'd called ->open()), it's probably much too late in the
cycle to do so right now.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull scheduler fixes from Thomas Gleixner:

 - two patches addressing the problem that the scheduler allows under
   certain conditions user space tasks to be scheduled on CPUs which are
   not yet fully booted which causes a few subtle and hard to debug
   issue

 - add a missing runqueue clock update in the deadline scheduler which
   triggers a warning under certain circumstances

 - fix a silly typo in the scheduler header file

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/headers: Fix typo
  sched/deadline: Fix missing clock update
  sched/core: Require cpu_active() in select_task_rq(), for user tasks
  sched/core: Fix rules for running on online && !active CPUs

Pull perf tooling fixes from Thomas Gleixner:

 - fix 'perf test Session topology' segfault on s390 (Thomas Richter)

 - fix NULL return handling in bpf__prepare_load() (YueHaibing)

 - fix indexing on Coresight ETM packet queue decoder (Mathieu Poirier)

 - fix perf.data format description of NRCPUS header (Arnaldo Carvalho
   de Melo)

 - update perf.data documentation section on cpu topology

 - handle uncore event aliases in small groups properly (Kan Liang)

 - add missing perf_sample.addr into python sample dictionary (Leo Yan)

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools: Fix perf.data format description of NRCPUS header
  perf script python: Add addr into perf sample dict
  perf data: Update documentation section on cpu topology
  perf cs-etm: Fix indexing for decoder packet queue
  perf bpf: Fix NULL return handling in bpf__prepare_load()
  perf test: "Session topology" dumps core on s390
  perf parse-events: Handle uncore event aliases in small groups properly

Pull networking fixes from David Miller:

 1) Infinite loop in _decode_session6(), from Eric Dumazet.

 2) Pass correct argument to nla_strlcpy() in netfilter, also from Eric
    Dumazet.

 3) Out of bounds memory access in ipv6 srh code, from Mathieu Xhonneux.

 4) NULL deref in XDP_REDIRECT handling of tun driver, from Toshiaki
    Makita.

 5) Incorrect idr release in cls_flower, from Paul Blakey.

 6) Probe error handling fix in davinci_emac, from Dan Carpenter.

 7) Memory leak in XPS configuration, from Alexander Duyck.

 8) Use after free with cloned sockets in kcm, from Kirill Tkhai.

 9) MTU handling fixes fo ip_tunnel and ip6_tunnel, from Nicolas
    Dichtel.

10) Fix UAPI hole in bpf data structure for 32-bit compat applications,
    from Daniel Borkmann.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits)
  bpf: fix uapi hole for 32 bit compat applications
  net: usb: cdc_mbim: add flag FLAG_SEND_ZLP
  ip6_tunnel: remove magic mtu value 0xFFF8
  ip_tunnel: restore binding to ifaces with a large mtu
  net: dsa: b53: Add BCM5389 support
  kcm: Fix use-after-free caused by clonned sockets
  net-sysfs: Fix memory leak in XPS configuration
  ixgbe: fix parsing of TC actions for HW offload
  net: ethernet: davinci_emac: fix error handling in probe()
  net/ncsi: Fix array size in dumpit handler
  cls_flower: Fix incorrect idr release when failing to modify rule
  net/sonic: Use dma_mapping_error()
  xfrm Fix potential error pointer dereference in xfrm_bundle_create.
  vhost_net: flush batched heads before trying to busy polling
  tun: Fix NULL pointer dereference in XDP redirect
  be2net: Fix error detection logic for BE3
  net: qmi_wwan: Add Netgear Aircard 779S
  mlxsw: spectrum: Forbid creation of VLAN 1 over port/LAG
  atm: zatm: fix memcmp casting
  iwlwifi: pcie: compare with number of IRQs requested for, not number of CPUs
  ...

Pull SCSI fix from James Bottomley:
 "Eve of merge window fix: The original code was so bogus as to be
  casting the wrong generic device to an rport and proceeding to take
  actions based on the bogus values it found.

  Fortunately it seems the location that is dereferenced always exists,
  so the code hasn't oopsed yet, but it certainly annoys the memory
  checkers"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: scsi_transport_srp: Fix shost to rport translation

Pull drm fixes from Dave Airlie:
 "A few final fixes:

  i915:
   - fix for potential Spectre vector in the new query uAPI
   - fix NULL pointer deref (FDO #106559)
   - DMI fix to hide LVDS for Radiant P845 (FDO #105468)

  amdgpu:
   - suspend/resume DC regression fix
   - underscan flicker fix on fiji
   - gamma setting fix after dpms

  omap:
   - fix oops regression

  core:
   - fix PSR timing

  dw-hdmi:
   - fix oops regression"

* tag 'drm-fixes-for-v4.17-rc8' of git://people.freedesktop.org/~airlied/linux:
  drm/amd/display: Update color props when modeset is required
  drm/amd/display: Make atomic-check validate underscan changes
  drm/bridge/synopsys: dw-hdmi: fix dw_hdmi_setup_rx_sense
  drm/amd/display: Fix BUG_ON during CRTC atomic check update
  drm/i915/query: nospec expects no more than an unsigned long
  drm/i915/query: Protect tainted function pointer lookup
  drm/i915/lvds: Move acpi lid notification registration to registration phase
  drm/i915: Disable LVDS on Radiant P845
  drm/omap: fix NULL deref crash with SDI displays
  drm/psr: Fix missed entry in PSR setup time table.

Two last minute DC fixes for 4.17.  A fix for underscan on fiji and
a fix for gamma settings getting after dpms.

* 'drm-fixes-4.17' of git://people.freedesktop.org/~agd5f/linux:
  drm/amd/display: Update color props when modeset is required
  drm/amd/display: Make atomic-check validate underscan changes

Pull MIPS fixes from James Hogan:
 "A final few MIPS fixes for 4.17:

   - drop Lantiq gphy reboot/remove reset (4.14)

   - prctl(PR_SET_FP_MODE): Disallow PRE without FR (4.0)

   - ptrace(PTRACE_PEEKUSR): Fix 64-bit FGRs (3.15)"

* tag 'mips_fixes_4.17_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: ptrace: Fix PTRACE_PEEKUSR requests for 64-bit FGRs
  MIPS: prctl: Disallow FRE without FR with PR_SET_FP_MODE requests
  MIPS: lantiq: gphy: Drop reboot/remove reset asserts

Pull VFIO fix from Alex Williamson:
 "Revert a pfn page mapping optimization identified as introducing a bad
  page state regression (Alex Williamson)"

* tag 'vfio-v4.17' of git://github.com/awilliam/linux-vfio:
  Revert "vfio/type1: Improve memory pinning process for raw PFN mapping"

Pull char/misc driver fixes from Greg KH:
 "Here are four small bugfixes for some char/misc drivers. Well, really
  three fixes and one fix for one of those fixes due to problems found
  by 0-day.

  This resolves some reported issues with the hwtracing drivers, and a
  reported regression for the thunderbolt subsystem. All of these have
  been in linux-next for a while now with no reported problems"

* tag 'char-misc-4.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  hwtracing: stm: fix build error on some arches
  intel_th: Use correct device when freeing buffers
  stm class: Use vmalloc for the master map
  thunderbolt: Handle NULL boot ACL entries properly

Pull IIO driver fixes from Greg KH:
 "Here are some old IIO driver fixes that were sitting in my tree for a
  few weeks. Sorry about not getting them to you sooner. They fix a
  number of small IIO driver issues that have been reported.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'staging-4.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: adc: select buffer for at91-sama5d2_adc
  iio: hid-sensor-trigger: Fix sometimes not powering up the sensor after resume
  iio: adc: at91-sama5d2_adc: fix channel configuration for differential channels
  iio:kfifo_buf: check for uint overflow
  iio:buffer: make length types match kfifo types
  iio: adc: stm32-dfsdm: fix sample rate for div2 spi clock
  iio: adc: stm32-dfsdm: fix successive oversampling settings
  iio: ad7793: implement IIO_CHAN_INFO_SAMP_FREQ

Pull rdma fixes from Jason Gunthorpe:
 "Just three small last minute regressions that were found in the last
  week. The Broadcom fix is a bit big for rc7, but since it is fixing
  driver crash regressions that were merged via netdev into rc1, I am
  sending it.

   - bnxt netdev changes merged this cycle caused the bnxt RDMA driver
     to crash under certain situations

   - Arnd found (several, unfortunately) kconfig problems with the
     patches adding INFINIBAND_ADDR_TRANS. Reverting this last part,
     will fix it more fully outside -rc.

   - Subtle change in error code for a uapi function caused breakage in
     userspace. This was bug was subtly introduced cycle"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  IB/core: Fix error code for invalid GID entry
  IB: Revert "remove redundant INFINIBAND kconfig dependencies"
  RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes

Pull i2c fixes from Wolfram Sang:
 "A documentation bugfix and a MAINTAINERS addition"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: ocores: update HDL sources URL
  i2c: xlp9xx: Add MAINTAINERS entry

Merge two fixes from Andrew Morton.

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: fix the NULL mapping case in __isolate_lru_page()
  mm/huge_memory.c: __split_huge_page() use atomic ClearPageDirty()