Caused by two typos, no output channel mappings were assigned for
MADI/MADIface at double/quad speed.

The channel mapping is indeed identical to the single speed mapping, the
cards will simply use the first N channels.
Signed-off-by: NFlorian Faber <faber@faberman.de>
Signed-off-by: NFredrik Lingvall <fredrik.lingvall@gmail.com>
Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Without calling an appropriate rule, AES/AES32 cards would announce a
theoretical channel count of 64 (HDSPM_MAX_CHANNELS), leading to the
already known bug:

[37422.640481] ------------[ cut here ]------------
[37422.640487] WARNING: at sound/pci/rme9652/hdspm.c:5449
snd_hdspm_ioctl+0x18f/0x202 [snd_hdspm]()
[37422.640489] Hardware name: PRIMERGY RX100 S6
[37422.640490] BUG? (info->channel >= hdspm->max_channels_in)
[37422.640492] Modules linked in: snd_hdspm snd_seq_midi ipmi_watchdog
ipmi_poweroff ipmi_si ipmi_devintf ipmi_msghandler i2c_i801 e1000e
snd_rawmidi power_meter [last unloaded: snd_hdspm]
[37422.640501] Pid: 22231, comm: jackd Tainted: G      D W
2.6.36-gentoo-r5 #5
[37422.640502] Call Trace:
[37422.640508]  [<ffffffff8103db3a>] warn_slowpath_common+0x80/0x98
[37422.640511]  [<ffffffff8103dbe6>] warn_slowpath_fmt+0x41/0x43
[37422.640514]  [<ffffffff81034306>] ? get_parent_ip+0x11/0x42
[37422.640518]  [<ffffffffa0055763>] snd_hdspm_ioctl+0x18f/0x202
[snd_hdspm]
[37422.640522]  [<ffffffff813fd626>] snd_pcm_channel_info+0x73/0x7c
[37422.640525]  [<ffffffff814001e9>] snd_pcm_common_ioctl1+0x326/0xb01
[37422.640527]  [<ffffffff81034306>] ? get_parent_ip+0x11/0x42
[37422.640531]  [<ffffffff8105be6c>] ? __srcu_read_unlock+0x3b/0x59
[37422.640533]  [<ffffffff81400bce>] snd_pcm_capture_ioctl1+0x20a/0x227
[37422.640537]  [<ffffffff811e599c>] ? file_has_perm+0x90/0x9e
[37422.640540]  [<ffffffff81400c15>] snd_pcm_capture_ioctl+0x2a/0x2e
[37422.640543]  [<ffffffff810f2c69>] do_vfs_ioctl+0x404/0x453
[37422.640546]  [<ffffffff810f2d09>] sys_ioctl+0x51/0x74
[37422.640549]  [<ffffffff81002aab>] system_call_fastpath+0x16/0x1b
[37422.640552] ---[ end trace 0cd919cd68118082 ]---

We already have all the right values in place, we simply have to inform
the upper layers about this restriction.

Note that snd_hdspm_hw_rule_rate_out_channels and
snd_hdspm_hw_rule_rate_in_channels must not be called on AES32, because
the channel count is always 16, no matter of the samplerate in use.
Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Only RayDAT and AIO provide sane buffer pointers that can be used with
HDSPM_BufferPositionMask, on all other cards, this would result in a
wrong HW pointer leading to xruns and these messages:

[260808.916788] BUG: pcmC0D0p:0, pos = 2976, buffer size = 1024, period size = 512
[260808.961124] BUG: pcmC0D0c:0, pos = 4944, buffer size = 1024, period size = 512
Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

On RME AES and AES(32), none of the required information
(max_channels_in, max_channels_out, channel mappings, port names) was
set, leading to the BUG below.

This patch adds the missing bits, thus fixing the bug.

125.058768] ------------[ cut here ]------------
[  125.058773] WARNING: at sound/pci/rme9652/hdspm.c:5389
snd_hdspm_ioctl+0x10c/0x1d8 [snd_hdspm]()
[  125.058775] Hardware name: PRIMERGY RX100 S6
[  125.058777] BUG? (info->channel >= hdspm->max_channels_out)
[  125.058778] Modules linked in: ipmi_watchdog ipmi_poweroff ipmi_si
ipmi_devintf ipmi_msghandler snd_hdspm power_meter e1000e snd_rawmidi
i2c_i801
[  125.058787] Pid: 3652, comm: audacity Tainted: G        W
2.6.36-gentoo-r5 #5
[  125.058788] Call Trace:
[  125.058792]  [<ffffffff8103db3a>] warn_slowpath_common+0x80/0x98
[  125.058796]  [<ffffffff8103dbe6>] warn_slowpath_fmt+0x41/0x43
[  125.058800]  [<ffffffffa006761a>] snd_hdspm_ioctl+0x10c/0x1d8
[snd_hdspm]
[  125.058803]  [<ffffffff813fd626>] snd_pcm_channel_info+0x73/0x7c
[  125.058806]  [<ffffffff814001e9>] snd_pcm_common_ioctl1+0x326/0xb01
[  125.058809]  [<ffffffff810c604c>] ? __do_fault+0x361/0x3a6
[  125.058812]  [<ffffffff81400e23>] snd_pcm_playback_ioctl1+0x20a/0x227
[  125.058815]  [<ffffffff811e599c>] ? file_has_perm+0x90/0x9e
[  125.058818]  [<ffffffff81400e6a>] snd_pcm_playback_ioctl+0x2a/0x2e
[  125.058821]  [<ffffffff810f2c69>] do_vfs_ioctl+0x404/0x453
[  125.058824]  [<ffffffff810f2d09>] sys_ioctl+0x51/0x74
[  125.058827]  [<ffffffff81002aab>] system_call_fastpath+0x16/0x1b
[  125.058830] ---[ end trace 5bddb08e5d4cbeb1 ]---
Signed-off-by: NAdrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: NFlorian Faber <faber@faberman.de>
Signed-off-by: NFredrik Lingvall <fredrik.lingvall@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add " Playback Volume" to 10 bands Equalizer Controls of au88x0 so that
alsa-lib won't regard them as "Capture Volume".
Signed-off-by: NRaymond Yau <superquad.vortex2@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Make newly created AC97 emulation of azt3328 known to the AC97 layer
side.
- relocate common functions to the top (due to definition after use)
- rename control names
- adjust 3D settings to the card's custom layout of this register
Signed-off-by: NAndreas Mohr <andi@lisas.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Make use of the very flexible ALSA ac97 layer (hooks for custom I/O!)
on this weird AC97 copycat hardware,
via semi-extended I/O translation/emulation.

Some 5kB binary/loaded size saved (well... additional huge AC97 module
penalty not factored in, of course ;-P).
Given that the driver previously had 20kB that's not bad,
but the much more important thing is to have AC97 layer stress-tested
with a thoroughly weird AC97 copycat (or, simply put, if it were not for
this AC97 test aspect, this effort would merely have been a nut job ;).
Signed-off-by: NAndreas Mohr <andi@lisas.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use AC97 macros (sometimes already existing, or newly added)
instead of error-prone repetition of open-coded values.
Signed-off-by: NAndreas Mohr <andi@lisas.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The number of cases has increased so use switch-case rather than
if-statements.
Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The MK2 generation of Native Instruments' sound cards are in fact
compliant to the USB audio standard of version 2 and other approved USB
standards. However, they come up as vendor-specific device when first
connected but can be told to come up with a new set of descriptors
upon their next enumeration. The interfaces announced by the new
descriptors will be handled by the kernel's class drivers. This is done
by issuing a vendor specific device request and sending the device to
reset.

There are also some vendor-specific USB requests for some mixer elements
that can't be exported in a standard compliant way. The driver now
supports them with quirks handling mechanisms.
Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NDaniel Mack <daniel@caiaq.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Change the core code where sparse complains.  In most cases, this means
just adding annotations to confirm that we indeed want to do the dirty
things we're doing.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Firmware version check depends on hpi version. Update so correct firmware
is accepted.
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Difference in major.minor between driver and firmware is an error now.
Release version mismatch give a warning.
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HPI version 4.05.32
Tweak HPI error code for backward compatibility.
Add BUILD to build-related defines.
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Interrupt flag used for message handshake will be required for
stream interrupts, so conditionally compiled code without
HPI6205_NO_HSR_POLL defined can never be used;  removing it.
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Remove unused function.
Simplify hpi_alloc_control_cache.
Remove useless assignment to struct subsequently freed.
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Create and use HPI_ERROR_DSP_COMMUNICATION _DSP_BOOTLOAD, rather than
backend-specific error codes (now returned as data with the error).
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

asihpi.c don't link playback and capture streams, there is too much
offset between them.
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some error codes had duplicate meanings. Just use one.
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Reported samples_played from card may be inaccurate, so don't use it.
Update control names to be closer to alsa standard practice.
Also fixed some accidentally lowercased strings.

[Removed adriver.h inclusion for external module builds by tiwai]
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Remove many unused functions.
Update some message and cache structs.
Use pci info directly from pci_dev.
Allow control cache elements with variable size, and handle
large message/response from dsp.
hpi6000 and hpi6205: fix error path when adapter bootload fails.
hpimsgx.c get rid of code duplicated in hpicmn.c
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

All enum values numeric for easier finding, particularly error codes.
Remove many unused declarations.
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Log HPI messages and responses in consistent numeric format,
which can be post-processed to get strings.
Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>