Since commit 844b03f2 we make
sure that after vblank irq off, we return the last valid
(vblank count, vblank timestamp) pair to clients, e.g., during
modesets, which is good.

An overlooked side effect of that commit for kms drivers without
support for precise vblank timestamping is that at vblank irq
enable, when we update the vblank counter from the hw counter, we
can't update the corresponding vblank timestamp, so now we have a
totally mismatched timestamp for the new count to confuse clients.

Restore old client visible behaviour from before Linux 3.17, but
zero out the timestamp at vblank counter update (instead of disable
as in original implementation) if we can't generate a meaningful
timestamp immediately for the new vblank counter. This will fix
this regression, so callers know they need to retry again later
if they need a valid timestamp, but at the same time preserves
the improvements made in the commit mentioned above.
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Cc: <stable@vger.kernel.org> #v3.17+

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Tegra would not only need a hardware vblank counter that
increments at leading edge of vblank, but also support
for instantaneous high precision vblank timestamp queries, ie.
a proper implementation of dev->driver->get_vblank_timestamp().

Without these, there can be off-by-one errors during vblank
disable/enable if the scanout is inside vblank at en/disable
time, and additionally clients will never see any useable
vblank timestamps when querying via drmWaitVblank ioctl. This
would negatively affect swap scheduling under X11 and Wayland.
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Acked-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

When non-removable is used for emmc,  MMC_CAP_NONREMOVABLE should
also be checked, otherwise detection fail since present=0
Signed-off-by: NZhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Set 0 to des1 in 32bit case.
Otherwise the random value of des1 will be used in
dw_mci_translate_sglist: IDMAC_SET_BUFFER1_SIZE(desc, length)
Signed-off-by: NFei Wang <w.f@huawei.com>
Signed-off-by: NZhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Currently in validate_group(), there is a static initializer
for fake_pmu.used_mask which is based on CPU_BITS_NONE but
the used_mask array size is based on CCI_PMU_MAX_HW_EVENTS.
CCI_PMU_MAX_HW_EVENTS is not based on NR_CPUS, so CPU_BITS_NONE
is not correct and will cause a build failure if NR_CPUS
is set high enough to make CPU_BITS_NONE larger than used_mask.
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NMark Salter <msalter@redhat.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Saving the current UVD state on suspend and restoring it on resume
just doesn't work reliable. Just close cleanup all sessions on suspend.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

MPEG 2/4 are only supported since UVD3.
Signed-off-by: NChristian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Invalid messages can crash the hw otherwise.
Signed-off-by: NChristian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Invalid handles can crash the hw.
Signed-off-by: NChristian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We shouldn't try to reserve and wait for a BO that isn't bound. Otherwise
we can run into a deadlock if we have a fault during binding the BO.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fixing a memory leak with userptrs.

v2: clean up the loop, use an iterator instead
v3: remove unused variable
Signed-off-by: Nmonk.liu <monk.liu@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch fixes a bug where sdma vm wasn't initialized when
an sdma queue was created in HWS mode.

This caused GPUVM faults to appear on dmesg and it is one of the
causes that SDMA queues are not working.
Signed-off-by: NXihan Zhang <xihan.zhang@amd.com>
Reviewed-by: NBen Goz <ben.goz@amd.comt>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

This patch sets the local memory size that is reported to userspace to 0.
This is done to make sure that userspace won't try to allocate local memory
for HSA.

As long as amdkfd doesn't support allocating local memory for HSA,
we need this patch.
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Sometimes we might unregister process that have queues, because we couldn't
preempt the queues. Until now we blocked it with BUG_ON but instead just
print it as debug.
Reviewed-by: NBen Goz <ben.goz@amd.com>
Signed-off-by: NOded Gabbay <oded.gabbay@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Since the introduction of BIOS fb preservation, circa 3.17, we began
encountering a failure during boot when trying to use force-detect
before GEM was initialised. That bug is from

commit 7fad798e
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Jul 4 17:51:47 2012 +0200

    drm/i915: ensure the force pipe A quirk is actually followed

but investigation of the affected machine revealed that it was using a
PIPE-A quirk even though it was a 945GSE and the quirk is only supposed
to be used to workaround a hardware issue on 830/845. That quirk was
added for this HP Mini in

commit 6b93afc564a5e74b0eaaa46c95f557449951b3b9
Author: Bryce Harrington <bryce@bryceharrington.org>
Date:   Wed May 27 03:40:52 2009 -0700

    add pipe a force quirk for Dell mini

in order to workaround an issue with the BIOS behaving strangely during
lid-close. Since then we have a much larger hammer to thwart the BIOS
after opening the lid and the PIPE-A quirk is no longer required.
Reported-and-tested-by: NApostolos B. <barz621@gmail.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=21960
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=87521Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

The sink rate read from supported link rate table is in KHz as per spec
while in drm, the saved clock is in deca-KHz. So divide the link rate by
10 before storing.

Reading of rates was added by:
commit fc0f8e25 ("drm/i915/skl: Read sink supported rates from edp
panel")

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NSonika Jindal <sonika.jindal@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Way back, when the world was a simpler place and there was no war, no
evil, and no kernel bugs, there was just a single pinctrl lock.  That
was how the world was when (57291ce2 pinctrl: core device tree mapping
table parsing support) was written.  In that case, there were
instances where the pinctrl mutex was already held when
pinctrl_register_map() was called, hence a "locked" parameter was
passed to the function to indicate that the mutex was already locked
(so we shouldn't lock it again).

A few years ago in (42fed7ba pinctrl: move subsystem mutex to
pinctrl_dev struct), we switched to a separate pinctrl_maps_mutex.
...but (oops) we forgot to re-think about the whole "locked" parameter
for pinctrl_register_map().  Basically the "locked" parameter appears
to still refer to whether the bigger pinctrl_dev mutex is locked, but
we're using it to skip locks of our (now separate) pinctrl_maps_mutex.

That's kind of a bad thing(TM).  Probably nobody noticed because most
of the calls to pinctrl_register_map happen at boot time and we've got
synchronous device probing.  ...and even cases where we're
asynchronous don't end up actually hitting the race too often.  ...but
after banging my head against the wall for a bug that reproduced 1 out
of 1000 reboots and lots of looking through kgdb, I finally noticed
this.

Anyway, we can now safely remove the "locked" parameter and go back to
a war-free, evil-free, and kernel-bug-free world.

Fixes: 42fed7ba ("pinctrl: move subsystem mutex to pinctrl_dev struct")
Signed-off-by: NDoug Anderson <dianders@chromium.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Make sure that xen_swiotlb_init allocates buffers that are DMA capable
when at least one memblock is available below 4G. Otherwise we assume
that all devices on the SoC can cope with >4G addresses. We do this on
ARM and ARM64, where dom0 is mapped 1:1, so pfn == mfn in this case.

No functional changes on x86.

From: Chen Baozi <baozich@gmail.com>
Signed-off-by: NChen Baozi <baozich@gmail.com>
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Tested-by: NChen Baozi <baozich@gmail.com>
Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>

At some point with all the GPIO clean-up we've broken the
MPUIO interrupts. Those are just a little bit different from
the GPIO interrupts, so we can fix it up just by setting
different irqchip functions for it. And then we can just
remove all old code trying to do the same.

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Javier Martinez Canillas <javier@dowhile0.org>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
Reviewed-by: NGrygorii Strashko <grygorii.strashko@linaro.org>
Acked-by: NSantosh Shilimkar <ssantosh@kernel.org>
Reviewed-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

During kernel boot, it will try to read some logical sectors
of each block device node for the possible partition table.

But since RPMB partition is special and can not be accessed
by normal eMMC read / write CMDs, it will cause below error
messages during kernel boot:
...
 mmc0: Got data interrupt 0x00000002 even though no data operation was in progress.
 mmcblk0rpmb: error -110 transferring data, sector 0, nr 32, cmd response 0x900, card status 0xb00
 mmcblk0rpmb: retrying using single block read
 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
 end_request: I/O error, dev mmcblk0rpmb, sector 0
 Buffer I/O error on device mmcblk0rpmb, logical block 0
 end_request: I/O error, dev mmcblk0rpmb, sector 8
 Buffer I/O error on device mmcblk0rpmb, logical block 1
 end_request: I/O error, dev mmcblk0rpmb, sector 16
 Buffer I/O error on device mmcblk0rpmb, logical block 2
 end_request: I/O error, dev mmcblk0rpmb, sector 24
 Buffer I/O error on device mmcblk0rpmb, logical block 3
...

This patch will discard the access request in eMMC queue if
it is RPMB partition access request. By this way, it avoids
trigger above error messages.

Fixes: 090d25fe ("mmc: core: Expose access to RPMB partition")
Signed-off-by: NYunpeng Gao <yunpeng.gao@intel.com>
Signed-off-by: NChuanxiao Dong <chuanxiao.dong@intel.com>
Tested-by: NMichael Shigorin <mike@altlinux.org>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

f9fd54f2 ("mmc: sh_mmcif: Use msecs_to_jiffies() for host->timeout")
changed the timeout value from 1000 jiffies to 1s. In the case where
HZ is 1000 the values are the same. However, for smaller HZ values the
timeout is now smaller, 1s instead of 10s in the case of HZ=100.

Since the timeout occurs in spite of a normal data transfer a timeout of
10s seems more appropriate. This restores the previous timeout in the
case where HZ=100 and results in an increase over the previous timeout
for larger values of HZ.

Fixes: f9fd54f2 ("mmc: sh_mmcif: Use msecs_to_jiffies() for host->timeout")
Signed-off-by: NTakeshi Kihara <takeshi.kihara.df@renesas.com>
[horms: rewrote changelog to refer to HZ]
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NYoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

The eDP port A register on PCH split platforms has a slightly different
register layout from the other ports, with bit 6 being either alternate
scrambler reset or reserved, depending on the generation. Our
misinterpretation of the bit as audio has lead to warning.

Fix this by not enabling audio on port A, since none of our platforms
support audio on port A anyway.

v2: DDI doesn't have audio on port A either (Sivakumar Thulasimani)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89958Reported-and-tested-by: NChris Bainbridge <chris.bainbridge@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: NSivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Lots of little fixes for multi-part messages:

The values was not being re-initialized, if something went wrong
handling a multi-part message and it got left in a bad state, it
might be an issue.

The commands were not correct when issuing multi-part reads, the
code was not passing in the proper value for commands.  Also clean
up some minor formatting issues.

Get the block number from the right location, limit the maximum send
message size to 63 bytes and explain why, and fix some minor sylistic
issues.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>

The SSIF interface can optionally have an SMBus alert come in when
data is ready.  Unfortunately, the IPMI spec gives wiggle room to
the implementer to allow them to always have the alert enabled,
even if the driver doesn't enable it.  So implement alerts.
If you don't in this situation, the SMBus alert handling will
constantly complain.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>

start_next_msg() issues a message placed in smi_info->waiting_msg
if it is non-NULL.  However, sender() sets a message to
smi_info->curr_msg and NULL to smi_info->waiting_msg in the context
of run_to_completion mode.  As the result, it leads an infinite
loop by waiting the completion of unissued message when leaving
dying message after kernel panic.

sender() should set the message to smi_info->waiting_msg not
curr_msg.
Signed-off-by: NHidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Signed-off-by: NCorey Minyard <cminyard@mvista.com>

When probing an ACPI table, report a specific error, instead of just
returning an error, if _IFT doesn't exist.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>

Remove including <linux/version.h> that don't need it.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NCorey Minyard <cminyard@mvista.com>

While setting the time, the RTC TIME register should not be accessed.
However due to hardware constraints, setting the RTC time involves
sleeping during 100ms.  This sleep was done outside the critical section
protected by the spinlock, so it was possible to read the RTC TIME
register and get an incorrect value.  This patch introduces a mutex for
protecting the RTC TIME access, unlike the spinlock it is allowed to
sleep in a critical section protected by a mutex.

The RTC STATUS register can still be used from the interrupt handler but
it has no effect on setting the time.
Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: NAndrew Lunn <andrew@lunn.ch>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: <stable@vger.kernel.org>	[4.0]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a basic driver for the ultra-low-power Abracon AB x80x series of RTC
chips. It supports in particular, the supersets AB0805 and AB1805.
It allows reading and writing the time, and enables the supercapacitor/
battery charger.

[arnd@arndb.de: abx805 depends on i2c]
[alexandre.belloni@free-electrons.com: renam buffer from date to buf in abx80x_rtc_read_time()]
Signed-off-by: NPhilippe De Muyter <phdm@macqel.be>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Revert commit c72c6160

It was intended to be a cosmetic change that w/o any functional change
and was part of a bigger change:

  http://lkml.iu.edu/hypermail/linux/kernel/1503.1/01818.html

Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix the following warning:

warning: "static" is not at beginning of declaration
 void static hotkey_mask_warn_incomplete_mask(void)
 ^
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Cc: Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
Cc: Darren Hart <dvhart@infradead.org>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Really ignore them by returning -ENODEV from the probe, but not
doing anything.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>

commit d6c5dc18 ("ipmi: Remove uses of return value of seq_printf")
incorrectly changed the return value of various proc_show functions
to use seq_has_overflowed().

These functions should return 0 on completion rather than 1/true
on overflow.  1 is the same as #define SEQ_SKIP which would cause
the output to not be emitted (skipped) instead.

This is a logical defect only as the length of these outputs are
all smaller than the initial allocation done by the seq filesystem.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NCorey Minyard <cminyard@mvista.com>

Some of the adapters have spaces in their names, but that's really
hard to pass in as a module or kernel parameters.  So ignore the
spaces.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>

Returning zero is success.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>

.. because bind_evtchn_to_cpu(evtchn, cpu) will map evtchn to
'info' and pass 'info' down to xen_evtchn_port_bind_to_cpu().
Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: NAnnie Li <annie.li@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>

After a resume the hypervisor/tools may change console event
channel number. We should re-query it.
Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>

After a resume the hypervisor/tools may change xenbus event
channel number. We should re-query it.
Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>

When a guest is resumed, the hypervisor may change event channel
assignments. If this happens and the guest uses 2-level events it
is possible for the interrupt to be claimed by wrong VCPU since
cpu_evtchn_mask bits may be stale. This can happen even though
evtchn_2l_bind_to_cpu() attempts to clear old bits: irq_info that
is passed in is not necessarily the original one (from pre-migration
times) but instead is freshly allocated during resume and so any
information about which CPU the channel was bound to is lost.

Thus we should clear the mask during resume.

We also need to make sure that bits for xenstore and console channels
are set when these two subsystems are resumed. While rebind_evtchn_irq()
(which is invoked for both of them on a resume) calls irq_set_affinity(),
the latter will in fact postpone setting affinity until handling the
interrupt. But because cpu_evtchn_mask will have bits for these two
cleared we won't be able to take the interrupt.

With that in mind, we need to bind those two channels explicitly in
rebind_evtchn_irq(). We will keep irq_set_affinity() so that we have a
pass through generic irq affinity code later, in case something needs
to be updated there as well.

(Also replace cpumask_of(0) with cpumask_of(info->cpu) in
rebind_evtchn_irq(): it should be set to zero in preceding
xen_irq_info_evtchn_setup().)
Signed-off-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Reported-by: NAnnie Li <annie.li@oracle.com>
Cc: <stable@vger.kernel.org> # 3.14+
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>

See also patch "IPoIB/cm: Add connected mode support for devices
without SRQs" (commit ID 68e995a2). Detected by smatch.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: Pradeep Satyanarayana <pradeeps@linux.vnet.ibm.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>