These are just from the Haswell spec.
Reviewed-by: NTodd Previte <tprevite@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Makes the code a bit more readable.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NSachin Kamat <sachin.kamat@samsung.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Not enough brown paper bags, you'll have to share one.
(oops below).

The initial match condition code was racy (locking is coming I hear).

then along came:
cd234b0b
drm/i915: Do not dereference NULL crtc or fb until after checking

Chris made an attempt to fix it, Ben "reviewed" it.
Daniel merged it.

Then
drm/i915: Make use of intel_fb_obj() (v2)
2ff8fde1

made it worse by removing the obj check later.

All in all, my laptop can't barely turn off the display
without hitting this.

Posted to #intel-gfx out of niceness, but I've merged
this already into drm-next.

Here's an oops.
[   11.528185] BUG: unable to handle kernel NULL pointer dereference at 00000000000000d0
[   11.528233] IP: [<ffffffffa0161fde>] intel_edp_psr_match_conditions+0x1e/0x2e0 [i915]
[   11.528294] PGD 35bc0067 PUD c997c067 PMD 0
[   11.528321] Oops: 0000 [#1] SMP
[   11.528916] CPU: 3 PID: 244 Comm: kworker/3:2 Not tainted 3.16.0-rc4+ #17
[   11.528949] Hardware name: LENOVO 20ARS25701/20ARS25701, BIOS GJET72WW (2.22 ) 02/21/2014
[   11.529004] Workqueue: events intel_edp_psr_work [i915]
[   11.529031] task: ffff8803079fdaa0 ti: ffff8803079c4000 task.ti: ffff8803079c4000
[   11.529067] RIP: 0010:[<ffffffffa0161fde>]  [<ffffffffa0161fde>] intel_edp_psr_match_conditions+0x1e/0x2e0 [i915]
[   11.529129] RSP: 0018:ffff8803079c7d40  EFLAGS: 00010246
[   11.529155] RAX: 0000000000000000 RBX: ffff88030c11c000 RCX: c000000000000000
[   11.529189] RDX: 0000000000000001 RSI: 1df0000000000000 RDI: ffff88030c1190d8
[   11.529222] RBP: ffff8803079c7d60 R08: ffffffff82691140 R09: 0000000000000000
[   11.529256] R10: ffff8803079fdaa0 R11: 3e00000000000000 R12: ffff88030c11c728
[   11.529290] R13: ffff88030c1190d8 R14: ffff88031e2d8e00 R15: 00000000000000c0
[   11.529324] FS:  0000000000000000(0000) GS:ffff88031e2c0000(0000) knlGS:0000000000000000
[   11.529361] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   11.529389] CR2: 00000000000000d0 CR3: 00000000c8d9d000 CR4: 00000000001407e0
[   11.529423] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   11.529457] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   11.529489] Stack:
[   11.529500]  ffff88030c119000 ffff88030c11c728 ffff88030c1190d8 ffff88031e2d8e00
[   11.529541]  ffff8803079c7d88 ffffffffa01679b2 ffff880035b29a80 ffff880307909f00
[   11.529583]  ffff88031e2d4740 ffff8803079c7df8 ffffffff810a78ab ffffffff810a7849
[   11.529624] Call Trace:
[   11.529654]  [<ffffffffa01679b2>] intel_edp_psr_work+0x52/0x90 [i915]
[   11.529689]  [<ffffffff810a78ab>] process_one_work+0x1db/0x540
[   11.529719]  [<ffffffff810a7849>] ? process_one_work+0x179/0x540
[   11.529750]  [<ffffffff810a81ed>] worker_thread+0x11d/0x520
[   11.529779]  [<ffffffff810a80d0>] ? create_and_start_worker+0x60/0x60
[   11.529810]  [<ffffffff810aeb04>] kthread+0xe4/0x100
[   11.529836]  [<ffffffff810aea20>] ? kthread_create_on_node+0x200/0x200
[   11.529870]  [<ffffffff81705ebc>] ret_from_fork+0x7c/0xb0
[   11.529896]  [<ffffffff810aea20>] ? kthread_create_on_node+0x200/0x200
[   11.529926] Code: ba 31 13 f0 c9 85 f6 75 84 eb d0 66 90 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 54 53 48 8b 87 68 ff ff ff 48 8b 9f 28 ff ff ff <48> 8b 80 d0 00 00 00 4c 8b 63 28 48 8b 40 48 48 85 c0 0f 84 1a
[   11.530110] RIP  [<ffffffffa0161fde>] intel_edp_psr_match_conditions+0x1e/0x2e0 [i915]
[   11.530163]  RSP <ffff8803079c7d40>
[   11.530180] CR2: 00000000000000d0
Signed-off-by: NDave Airlie <airlied@redhat.com>

misc core patches.

* tag 'topic/core-stuff-2014-07-18' of git://anongit.freedesktop.org/drm-intel:
  drm: Check for connection_mutex in drm_select_eld
  drm/dp-mst-helper: Don't use uninitialized fields of the sideband message header
  drm/dp-mst-helper: Avoid reading uninitialized value
  drm/plane-helper: Use proper plane init function
  drivers/gpu/drm/drm_buffer.c: remove unnecessary null test before kfree
  drm: Fix function names in kerneldoc

- fbc improvements when stolen memory is tight (Ben)
- cdclk handling improvements for vlv/chv (Ville)
- proper fix for stuck primary planes on gmch platforms with cxsr (Imre&Ebgert
  Eich)
- gen8 hw semaphore support (Ben)
- more execlist prep work from Oscar Mateo
- locking fixes for primary planes (Matt Roper)
- code rework to support runtime pm for dpms on hsw/bdw (Paulo, Imre & me), but
  not yet enabled because some fixes from Paulo haven't made the cut
- more gpu boost tuning from Chris
- as usual piles of little things all over

* tag 'drm-intel-next-2014-07-11' of git://anongit.freedesktop.org/drm-intel: (93 commits)
  drm/i915: Make the RPS interrupt generation mask handle the vlv wa
  drm/i915: Move RPS evaluation interval counters to i915->rps
  drm/i915: Don't cast a pointer to void* unnecessarily
  drm/i915: don't read LVDS regs at compute_config time
  drm/i915: check the power domains in intel_lvds_get_hw_state()
  drm/i915: check the power domains in ironlake_get_pipe_config()
  drm/i915: don't skip shared DPLL assertion on LPT
  drm/i915: Only touch WRPLL hw state in enable/disable hooks
  drm/i915: Switch to common shared dpll framework for WRPLLs
  drm/i915: ->enable hook for WRPLLs
  drm/i915: ->disable hook for WRPLLs
  drm/i915: State readout support for WRPLLs
  drm/i915: add POWER_DOMAIN_PLLS
  drm/i915: Document that the pll->mode_set hook is optional
  drm/i915: Basic shared dpll support for WRPLLs
  drm/i915: Precompute static ddi_pll_sel values in encoders
  drm/i915: BDW also has special-purpose DP DDI clocks
  drm/i915: State readout and cross-checking for ddi_pll_sel
  drm/i915: Move ddi_pll_sel into the pipe config
  drm/i915: Add a debugfs file for the shared dpll state
  ...

drm_select_eld should check for mode_config.connection_mutex as
well as mode_config.mutex: We need that since this function checks
conector->encoder links.
Signed-off-by: NSean Paul <seanpaul@chromium.org>
[danvet: Pimp commit message slightly.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We could be using uninitialized fields of the header in
drm_dp_encode_sideband_msg_hdr(), for instance hdr->somt is set to 1 in
the first patcket but never set to 0 otherwise.

Always clear the header at the start then.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

A static analysis tool tells me that we could try to read an
uninitialized 'ret' value. Plug that.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

drm_plane_init() (the legacy plane initialization function) takes a bool
as its final parameter; originally this indicated whether a plane was
'private' to the driver (before the DRM core understood non-overlay
planes), now it indicates whether the plane is a primary plane (private
planes were used by some drivers to represent primary planes
internally).  The newer drm_universal_plane_init() take an 'enum
drm_plane_type' as its final parameter to allow the caller to specify
the specific plane type desired (primary, cursor, or overlay).

Due to a rebasing mistake, the primary plane helper is currently passing
DRM_PLANE_TYPE_PRIMARY (enum value = 1) for drm_plane_init()'s boolean
'is_primary' parameter.  This winds up giving the correct behavior since
DRM_PLANE_TYPE_PRIMARY evaluates as true, but is confusing to anyone
reading the code since we're passing an enum value (one of three
possible values) for a boolean parameter.

Replace the primary plane helper's call to drm_plane_init() with
drm_universal_plane_init() so that the parameter and value types match
up as expected.
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch removes special case of last element and loops from idx to 0.

Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The drm_property_create_enum(), drm_property_create_bitmask() and
drm_property_create_range() contain the wrong name in the kerneldoc
comment. This is probably simply a copy/paste mistake.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

We can eliminate a lot of special case code by making the computation of
the interrupt mask be correct for all callers.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Place the RPS counters inside the RPS struct.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

C is super happy to asign anything pointer to void *. Don't pretend
otherwise.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We may reach this point while the machine is still runtime suspended,
so we'll hit a WARN. The other encoders also don't touch registers at
this point, so instead of waking the machine up, write some code to
keep the register always at the same state, including after we runtime
suspend/resume.

Testcase: igt/pm_rpm
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80463Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Just like we do for the other encoders. This should fix some WARNs
when running pm_rpm on SNB.

Testcase: igt/pm_rpm
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80463Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Just like we already do in haswell_get_pipe_config(). This should
prevent some WARNs when we run pm_rpm on SNB.

Testcase: igt/pm_rpm
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80463Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Since we now have support for shared DPLLS.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

To be able to do this we need to separately keep track of how many
crtcs need a given WRPLL and how many actually actively use it. The
common shared dpll framework already has all this, including massive
state readout and cross checking. Which allows us to do this switch in
a fairly small patch.
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Mostly this patch is one big excersize in deleting code and asserts
which are no longer needed. Note that we still abuse the shared dpll
framework a bit since we call the enable/disable functions from the
crtc mode_set and off hooks. But changing the actual hardware sequence
will be done in the next step.

Note that besides the massive amount of changes in this patch the
places and order in which the low-level WRPLL code is called is
absolutely unchanged.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
[imre: rebased on patchset version w/o pch/crt/fdi refactoring]
Signed-off-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This time around another cute hack to pre-fill the pll->hw_state with
the right values. And also remove a bunch of checks which will be
replaced by lots more checks in the common framework.
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Currently still with a redudant WARN_ON in there, the common shared
dpll code will take care of this in the future.

Also we need to flip the switch for the transitional hack now to make
sure that we disable the right pll.
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Still tacked onto the side, but slowly getting there.

v2: Don't forget the debugfs file.

v3 (from Paulo): Don't forget to check the power domains.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

And get/put it when needed. The special thing about this commit is
that it will now return false in ibx_pch_dpll_get_hw_state() in case
the power domain is not enabled. This will fix some WARNs we have when
we run pm_rpm on SNB.

Testcase: igt/pm_rpm
Bugzilla:https://bugs.freedesktop.org/show_bug.cgi?id=80463Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The WRPLLs won't use them.
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Just filing in names and ids, but not yet officially registering them
so that the hw state cross checker doesn't completely freak out about
them. Still since we do already read out and cross check
config->shared_dpll the basics are now there to flesh out the wrpll
shared dpll implementation.

The idea is now to roll out all the callbacks step-by-step and then at
the end switch to the shared dpll framework. This way hw and sw
changes are clearly separated.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
[imre: added const to hsw_ddi_pll_names (Damien)]
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This way only the dynamic WRPLL selection for hdmi ddi mode is
done in intel_ddi_pll_select.

v2: Don't clobber the precomputed values when selecting clocks fro
hdmi encoders.
v3 (from Paulo): Rebase on top of the s/IS_HASWELL/HAS_DDI/ patch.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NPaulo Zanoni <przanoni@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Don't let it fall in the HAS_PCH_SPLIT() case.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

To make things a bit more manageable extract a new function for
reading out common ddi port state. This means a bit of duplication
between encoders and the core since both look at the same registers,
but doesn't seem worth to make a fuzz about.

We can also remove the state readout code in intel_ddi_setup_hw_pll_state.
That code is only called from the hardware take over and not the cross
check code, and only after the crtc state is reconstructed. So we can
rely on an accurate value of crtc->config.ddi_pll_sel already.

Compared to the old code also trust the hw state more and don't
special-case port A - we want to cross-check the actual-state, not
bake in our own assumptions about how this is supposed to all be
linked up.

v2: Make use of the read-out ddi_pll_sel in intel_ddi_clock_get.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
[imre: rebased on patchset version w/o pch/crt/fdi refactoring]
Signed-off-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Just boring sed job for preparation.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
[imre: rebased on patchset version w/o pch/crt/fdi refactoring]
Signed-off-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>